Post on 02-Jun-2018
8/10/2019 VK200 - Complete Datasheets.pdf
1/50
M4-12-01
-2-MX200
/02.1
0/I00/
2011-09-06
/1-1
XXX 200 Fire Extinguishing System
Extinguishing agent XXXHeptafluoropropaneacc. to ISO 14520-9 - HFC 227eaSuitable for fire classes A, B and C
Contains fluorinated greenhouse gases covered by KyotoProtocol, GWP 3500
Dangerous goods classificationHI/UN 20/3296EWC - Code: 160501
Manufacturer / private labeler Extinguishing agent
WWW WWWXXX XXXYYY YYYZZZ ZZZ
Warning: Pressurized Extinguishing Agent - Read Instruction Carefully!
weight cylinder, full(incl. valve, without protection cap)
weight cylinder, empty(incl. valve, without protection cap)
system pressure at 70F (21C)
max. tolerable weight loss
weight extinguishing agent
Project number
date of first filling /
sign of first filler
Systemto be installed and maintainedinaccordance with
NFPA 2001,NationalFire Protection AssociationStandard onClean AgentFire Extinguishing Systems
ISO14520,Gaseous fire-extinguishingsystemsPhysical properties and systemdesignPart 9:HFC 227eaextinguishant
Fi ll in g st at io n: C yl in de r, f ac to ry t es t pr ess ur e
WWW DOT-4BW cylinder:XXX Cylinder tested at 2 times the marked service pressure
YYY DOT-3AA cylinder:ZZZ Cylinder tested at 5/3 times the marked service pressure
European cylinder accordingto directive 1999/36/EC:Cylinder tested to markedtest pressure
order no.
>>to be filled outby the filling station>to be filled out by the installer>to be filled out by the filling station
8/10/2019 VK200 - Complete Datasheets.pdf
2/50
M4-18-06
-1-MX200
/03.1
0/I00/
2011-09-08
/1-1
FM
200
FE
227
ea
text order no. weight CAUTION!This area is protected by a VK 200 fi resuppression system.When the fire alarm sounds, or in theevent of a FIRE and system discharge,EVACUATE hazard area immediatelyand DO NOT re-enter until area isthroughly ventilated.
17435
CAUTION!This area is protected by a VK200 fi resuppression system.In the event of a fire and systemdischarge, CAUTION must be taken toavoid exposure to products ofcombustion. DO NOT enter without anapproved self-contained breathingapparatus or until area is throughlyventilated.
17436
0.12 (0.26)
Technical Data Sheet:
Labels VK 200 - UL Caution! ........dimensions in mm (inch); weight in kg (lbs)
technical data:
material ............aluminium plate 1.0 mm (0.039 ") thicknessscript type ...................................................Helvetica medium facemanufacturers sign ..............................................................blue
8/10/2019 VK200 - Complete Datasheets.pdf
3/50
M4-12-01-1-MX200/02.1
0/I00/2011-09-06/1-2
Technical Data Sheet:
Extinguishing agent cylinder VK 200 22.0 l and 40.0 ldimensions in mm (inch); weight in kg (lbs)
valve type A / A25:B0482-A DN33
B0482-A25 DN33
valve type B / B25:B0482-B DN33
B0482-B25 DN33
nominal volume ~L D 3
22.0 l970
(35.19)229
(9.00)
40.0 l1450
(57.09)229
(9.00)
dimensions:
order informations:
The order has to specificed with the filling quantity.The extinguishing agent VK 200 (HFC-227ea) must beordered additionally.
A / A25 = valve B0482-A DN33 /valve B0482-A25 DN33 (for 25 bar)
B / B25 = valve B0482-B DN33 /valve B0482-B25 DN33 (for 25 bar)
(valves with integrated electrical release)
1)
2)
with integrated electrical release)
amount filledempty
weightpressure
at 21 C
(70 F)
nominalvolume
order no.
valve type min. max.
A / A25 B / B25 *not UL CE /VdS UL /FM VdS UL / FM / CE approx.
22.0 l(55 lbs)
16421 88 84559 kg
(19.84 lbs)11 kg
(24.30 lbs)22.9 kg
(50.50 lbs)25.1 kg
(55.40 lbs)50 (110)
25 bar(360 psi) 40.0 l
(100 lbs)16425 88 8458
16 kg(35.27 lbs)
20 kg(44.10 lbs)
41.6 kg(91.80 lbs)
45.6 kg(100.06 lbs)
59 (130)
22.0 l
(55 lbs) 16449 88 8460
9 kg
(19.84 lbs)
11 kg
(24.30 lbs)
22.9 kg
(50.50 lbs)
25.1 kg
(55.40 lbs) 50 (110)42 bar(610 psi)
*not UL / not FM 40.0 l(100 lbs)
16477 88 846216 kg
(35.27 lbs)20 kg
(44.10 lbs)41.6 kg
(91.80 lbs)45.6 kg
(100.60 lbs)59 (130)
22.0 l(55 lbs)
16501 88 84649 kg
(19.84 lbs)11 kg
(24.30 lbs)18.7 kg
(41.30 lbs)23.1 kg(51 lbs)
50 (110)50 bar
(725 psi) 40.0 l(100 lbs)
16505 88 846616 kg
(35.27 lbs)20 kg
(44.10 lbs)34 kg
(75 lbs)42 kg
(92.70 lbs)59 (130)
1)
2)
technical data:
fill ratio min.:CE/VdS ................................................. 0.4 kg/l (0.882 lbs/l)UL/FM ........................................................0.5 kg/l (1.1 lbs/l)fill ratio max.:VdS 25 bar (360 psi)
42 bar (610 psi) *not UL / FM....1.04 kg/l (2.293 lbs/l)
50 bar (725 psi) .................0.85 kg/l (1.874 lbs/l)
UL/FM/CE 25 bar (360 psi)
42 bar (610 psi) *not UL / FM....1.14 kg/l (2.513 lbs/l)
50 bar (725 psi) .................1.05 kg/l (2.315 lbs/l)
operating temperature range
................................-20 C up to +50 C (-4 F up to 122 F)UL/FM ..................... -18 C up to +50 C (0 F up to 122 F)
8/10/2019 VK200 - Complete Datasheets.pdf
4/50
M4-12-01-1-MX200/02.1
0/I00/2011-09-06/2-2
steel cylinder approval with collective certificate by:- a notified body in acc. with directive TPED 1999/36/EC- GL (Germanischer Lloyd) in acc. with directive MED 96/98/EC- DOT / TC- GOST-Rnot included in delivery:
adapter M12x1.5 - G1/8 VK 200/1230 .........................17155contact pressure gauge VK 200/1230 ...................................clamp for extinguishing agent cyl. VK 200/1230 ..................
release devices VK 200/1230 for valve type A / A25- electrical ...............................................................................- electrical with mech. blocking device ...................................- pneumatic .............................................................................- pneumatic/manual ................................................................- manual ..................................................................................- tackle pneum./manual ..........................................................
release devices VK 200/1230 for valve type B / B25:- pneumatic .............................................................................- pneumatic/manual ................................................................- manual .................................................................................- tackle pneum./manual ..........................................................
Technical Data Sheet:
Extinguishing agent cylinder VK 200 22.0 l and 40.0 ldimensions in mm (inch); weight in kg (lbs)
8/10/2019 VK200 - Complete Datasheets.pdf
5/50
8/10/2019 VK200 - Complete Datasheets.pdf
6/50
M4-12-05-1-MX200/02.1
0/I00/2011-09-06/2-2
2)
order informations:
The order has to specificed with the filling quantity.The extinguishing agent VK 200 (HFC-227ea) must beordered additionally.
A / A25 = valve B0481-A DN49 /valve B0481-A25 DN49 (for 25 bar)
B / B25 = valve B0481-B DN49 /valve B0481-B25 DN49 (for 25 bar)(valves with integrated electrical release)
approval with collective certificate by:- a notified body in acc. with directive TPED 1999/36/EC- GL (Germanischer Lloyd) in acc. with directive MED 96/98/EC- DOT/TC
GOST-R certificate of conformity acc. to ROSTECHNADZOR
technical data:
ffill ratio min.:CE/VdS ................................................. 0.4 kg/l (0.882 lbs/l)UL/FM ........................................................0.5 kg/l (1.1 lbs/l)fill ratio max.:VdS 25 bar (360 psi)
42 bar (610 psi) *not UL / FM....1.04 kg/l (2.293 lbs/l)
50 bar (725 psi) .................0.85 kg/l (1.874 lbs/l)
UL/FM/CE 25 bar (360 psi)
42 bar (610 psi) *not UL / FM....1.14 kg/l (2.513 lbs/l)
50 bar (725 psi) .................1.05 kg/l (2.315 lbs/l)
1)operating temperature range
................................-20 C up to +50 C (-4 F up to 122 F)UL/FM ..................... -18 C up to +50 C (0 F up to 122 F)
not included in delivery:
adapter M12x1,5 - G1/8 VK 200/1230 ..........................17155contact pressure gauge VK 200/1230 ...................................clamp for extinguishing agent cyl. VK 200/1230 ....................
release devices VK 200/1230 for valve type A / A25:- electrical ...............................................................................- electrical with mech. blocking device ...................................- pneumatic .............................................................................- pneumatic/manual ................................................................- manual .................................................................................- tackle pneum./manual ..........................................................
release devices VK 200/1230 for valve type B / B25:
- pneumatic .............................................................................- pneumatic/manual ................................................................- manual .................................................................................- tackle pneum./manual ..........................................................
Technical Data Sheet:
Extinguishing agent cylinder VK 200 80.0 l - 180.0 ldimensions in mm (inch); weight in kg (lbs)
8/10/2019 VK200 - Complete Datasheets.pdf
7/50
M4-12-05-1b-MX200/02.1
0/I00/2011-09-06/1-1
Technical Data Sheet:
Extinguishing agent cylinder VK 200 52.0 l, 106.0 l, 147.0 ldimensions in mm (inch); weight in kg (lbs)
valve type A / A25:
B0482-A25 DN33 (52.0 l)
B0481-A25 DN49
valve type B / B25:
B0482-B25 DN33 (52.0 l)
B0481-B25 DN49
(with integrated electrical release)
order informations:
The order has to specificed with the filling quantity.The extinguishing agent VK 200 (HFC-227ea) must beordered additionally.
A25 = valve B0482-A25 DN33 (52.0) /valve B0481-A25 DN49
B25 = valve B0482-B25 DN33 (52.0) /valve B0481-B25 DN49(valves with integrated electrical release)
approval with collective certificate by:- DOT 4BW500
technical data:
ffill ratio min.:
CE/VdS ................................................. 0.4 kg/l (0.882 lbs/l)UL/FM ........................................................0.5 kg/l (1.1 lbs/l)fill ratio max.:VdS 25 bar (360 psi)
42 bar (610 psi) *not UL / FM....1.04 kg/l (2.293 lbs/l)
50 bar (725 psi) .................0.85 kg/l (1.874 lbs/l)
UL/FM/CE 25 bar (360 psi)
42 bar (610 psi) *not UL / FM....1.14 kg/l (2.513 lbs/l)
50 bar (725 psi) .................1.05 kg/l (2.315 lbs/l)
operating temperature range:- ................................-20 C up to +50 C (-4 F up to 122 F)- UL/FM .......................-18 C up to +50 C (0 F up to 122 F)
not included in delivery:
adapter M12x1,5 - G1/8 VK 200/1230 .........................17155contact pressure gauge VK 200/1230 ....................................clamp for extinguishing agent cyl. VK 200/1230 ....................
release devices VK 200/1230 for valve type A25:- electrical ...............................................................................- electrical with mech. blocking device ...................................- pneumatic .............................................................................- pneumatic/manual ................................................................- manual .................................................................................- tackle pneum./manual ..........................................................
release devices VK 200/1230 for valve type B25:- pneumatic .............................................................................- pneumatic/manual ................................................................- manual .................................................................................- tackle pneum./manual ..........................................................
2)
1)
amount filledempty
weightorder no.
valve type
~L ~D
min. max.
pressureat 21 C
(70 F)
nominal
volume
A25 B25 * not UL 3 CE/VdS UL/FM VdS UL/FM/CE approx.
52.0 l(130 lbs)
16529 88 90991440
(56.70)254(10)
20.8 kg(45.90 lbs)
26.0 kg(57.40 lbs)
54.1 kg(119.30 lbs)
59.3 kg(130.80 lbs)
49(108)
106.0 l(270 lbs)
16533 88 91011250
(49.21)406.6(16)
42.4 kg(93.60 lbs)
53.0 kg(116.90 lbs)
110.2 kg(243.20 lbs)
120.8 kg(266.60 lbs)
86(190)
25 bar(360 psi)
147.0 l
(370 lbs)16537 88 9104
1580
(62.20)
406.6
(16)
58.8 kg
(129.70 lbs)
73.5 kg
(162.10 lbs)
152.9 kg
(337.20 lbs)
167.6 kg
(369.60 lbs)
104
(229)
1)
2)
8/10/2019 VK200 - Complete Datasheets.pdf
8/50
M4-04-07-1_
V1/02.0
8/I00/2010-11-
16/1-1
Technical Data Sheet:
Clamp for extinguishing agent cylinder VK 200/1230dimensions in mm (inch); weight in kg (lbs)
designation order no. R B weight
52/80l (dia. 267) 17157 134 (5.28) 120 (4.72) 1.46 (3.2)
22/40l 17158 117 (4.60) 112 (4.41) 1.26 (2.8)
100l 17159 160 (6.30) 155 (6.10) 1.69 (3.7)
140l (dia. 356) 17160 180 (7.09) 175 (6.89) 1.87 (4.1)
clamp for cylinder VK 200
80/106/140/1 47/180l 17161 205 (8.07) 200 (7.87) 2.08 (4.6)
technical data:
material ..........................................................................steel stripfinish .........................................matt-finished or powder-coated..............................................................RAL 9011 graphite black
not included in delivery:fastening material
(1.97)
(0.98)
(2.3
6)
(0.53)
8/10/2019 VK200 - Complete Datasheets.pdf
9/50
8/10/2019 VK200 - Complete Datasheets.pdf
10/50
M4-01-01
-1-MX200
/02.1
0
/I00/
2011-09-06
/2-2
Technical Data Sheet:
nozzles type CD, VK 200dimensions in mm (inch); weight in kg (lbs)
nozzle version order no. d L NPT D weight
Ms XCrNi min. max.
A* 88 9033 88 9046
B* 88 9034 88 9048
C** 17162 17168
6(0.236)CD 1/2
NPT
D** 17165 17171
3(0.118)
5(0.197)
55(2.165)
1/228
(1.102)0.2
(0.4)
A* 88 9038 88 9051
B* 88 9039 88 9052
C** 17163 17169
11(0.433)CD 1
NPT
D** 17165 17172
3(0.118)
10
(0.394)
65(2.559)
140
(1.575)0.4
(0.9)
A* 88 9042 88 9055
B* 88 9043 88 9056
C** 17164 17170
18(0.709)CD 1.1/2
NPT
D** 17167 17173
3(0.118)
16(0.630)
85(3.346)
1.1/255
(2.165)0.6
(1.3)
order informations:
for manufacturing, the nozzle bore diameter d must bestated within the permitted limits in 1/10 mm (0.004 inch)gradations
technical data:
type ..............................................................................CD VK 200
medium .......................................................VK200 HFC-227eaconnection thread Rp ..................in accordance with EN 10226connection thread NPT ..in accordance with ANSI/ASME B1.20.1operating pressure VdS .................................................................................... ...........min 9.6 bar (139 psi), max. 60 bar (870 psi)operating pressure CE/UL/FM...................................................................................min. 9 bar (131 psi), max. 60 bar (870 psi)required storage pressure in extinguishing agent container............................................dependent on system 25 bar (360 psi),......................42 bar (610 psi)* or 50 bar (725) at 21 C (70 F)nozzle body Ms .................................................................brass
XCrNi ............................................stainless steel
gradation of the bore hole diameters d ...........................................................................................in 0,1 mm (0.004 inch) stepsoperating temperature range ..............-20 C to +50 C UL/FM ...........-18 C to +50 C
note:
The 180 nozzle spray the extinguishing agent in a
semicircle and the 360 in a full circle around the nozzle.The dimensioning of the nozzle bore diameter takes placespecifically for the fire extinguishing system using acalculation program suitable for the extinguishing agent.Version A und B are for special use.For the installation of the nozzle you need a special tool.You can get it from your distributor.coverage area: ...........................................see design manualmin. - max. corage heigh: ........................see design manual
without UL / FM approval*
** without VdS approval
8/10/2019 VK200 - Complete Datasheets.pdf
11/50
M4-02-03-1_
V1/04.0
9/I00/2010-11-
16/1-1
designation order no. working pressureat 21 C
weightapprox.
B0482-A25 DN33 88 7964 25 barvalve
B0482-A DN33 88 7662 50 bar4.4 (9.7)
technical data:
extinguishing agent ....VK 200 (HFC 227ea), VK 1230 (FK-5-1-12)nominal diameter ................................................DN33 (1 1/2 ")(free cross-sectional area at minimum flow path 697 mm..........................................................................................................(1,080 in2))operating temperature .VdS/CE.........................-20 C up to +50 C (-4 F up to 122 F)UL/FM ..........................-18 C up to +50 C (0 F up to 122 F)max. working pressure at 50 C:- valve B0482-A25 DN33 ................................35 bar (508 psi)- valve B0482-A DN33 .....................................60 bar (870 psi)to be used for steel cylinder .....................from 22.0 l to 50.0 l
material / surface:
housing, adapter, screws ...................................................brassspindles, seal retainer ........................................................brassO-ring / seal of seat ..............................................................NBRbursting disk .......................................................................nickelspring ......................................................................................steeldamping ................................................................... ...........PA 6.6
section: F - F
not included in delivery:
adapter M12x1,5 - G1/8 VK 200/1230 .......................................contact pressure gauge VK 200/1230 .......................................dip tupe VK200/1230 for valves DN33 .......................................(dip tupes are to be shortened as necessary in acc. to specifieddimension given of the extinguishing agent cylinder)
release devices VK 200/1230:- electrical .......................................................................................- electrical with mech. blocking device .....................................- pneumatic ....................................................................................- pneumatic/manual ......................................................................
- manual ..........................................................................................- tackle pneum./manual ....................... ....................... .................
Technical Data Sheet:
Valves B0482-A25 and B0482-A DN33, VK 200/1230dimensions in mm (inch); weight in kg (lbs)
(2.54)
(2.82)
(2.9
1)
(3.1
9)
(1.2
0)
(1.3
0)
(1)
(1.3
8)
(7.4
0)
(2.2
0)
(wrench size 2.60)
G307011
1134 - CPD - 1007
8/10/2019 VK200 - Complete Datasheets.pdf
12/50
M4-02-03-2/04.0
9/I00/2010-11-16/1-1
Technical Data Sheet:
Valves B0482-B25 and B0482-B DN33 with integrated electrical
release VK 200/1230 * not ULdimensions in mm (inch); weight in kg (lbs)
designation order no.working pressure
at 21 C
weight
approx.
B0482-B25 DN33 88 7965 25 bar (360 psi)
valve with integratedB0482-B DN33 88 7663 50 bar (725 psi)
4.7 (10.4)
technical data:
extinguishing agent .....VK 200 (HFC 227ea), VK 1230 (FK-5-1-12)nominal diameter ................................................DN33 (1 1/2 ")................ ..(free cross-sectional area at minimum flow path 697 mm
...............................................................................................(1,080 in2))
operating temperatureVdS/CE.........................-20 C up to +50 C (-4 F up to 122 F)FM ................................-18 C up to +50 C (0 F up to 122 F)max. working pressure at 50 C (122 F):- valve B0482-B25 DN33 ....................................35 bar (508 psi)- valve B0482-B DN33 .........................................60 bar (870 psi)to be used for steel cylinder .......................from 22.0 l to 50.0 l
technical data:integrated electrical release:- voltage .................................................................................24 V DC- current intensity .....................................................0.25 A 10 %- output .....................................................................................0.6 W- protection category ................................................................IP 54- duty cycle .............................................................................100 %
section: F - F
material / surface:
housing, adapter, screws ......................................................brassspindles, seal retainer ..........................................................brassO-ring / seal of seat ..................................................................NBRbursting disk .............................................................................nickelspring .........................................................................................steeldamping ...................................................................................PA 6.6
not included in delivery:
adapter M12x1,5 - G1/8 VK 200/1230 .......................................contact pressure gauge VK 200/1230 .......................................dip tupe VK 200/1230 for valves DN33 ......................................(dip tupes are to be shortened as necessary in acc. to specified
dimension given of the extinguishing agent cylinder)
release devices VK 200/1230:- pneumatic .....................................................................................- pneumatic/manual .................................. ...................................- manual ..........................................................................................- tackle pneum./manual ..................... ....................... ...................
section: D - D
(wrench size 2.60)
(7.2
0)
(2.2
0)
(2.9
1)
(5.2
4)
(3.43)
(2.54)(2.82)
71 (2.80)
(1.3
0)
(1)
(1.3
8)
(3.1
9
)
(2.2
0)
G307011
1134 - CPD - 1007
8/10/2019 VK200 - Complete Datasheets.pdf
13/50
M4-02-07-1_
V1/04.0
9/I00/2010-11-
16/1-1
designation order no.working pressure
at 21 C
weight
approx.
B0481-A25 DN49 88 7966 25 bar (360 psi)
valve B0481-A DN49 88 7664 50 bar (725 psi)8.9 (19.6)
technical data:
extinguishing agent ....VK 200 (HFC 227ea), VK 1230 (FK-5-1-12)nominal diameter .......................................................DN49 (2 ")(free cross-sectional area at minimum flow path 1515 mm..........................................................................................(2,348 in2)operating temperatureVdS/CE.....................-20 C up to +50 C ( -4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)max. working pressure at 50 C (122 F):- valve B0481-A25 DN49 ................................35 bar (508 psi)- valve B0481-A DN49 .....................................60 bar (870 psi)to be used for steel cylinder ...................from 80.0 l to 180.0 l
material / surface:
housing, adapter, screws ....................................................brassspindles, seal retainer ........................................................brassO-ring / seal of seat ...............................................................NBRbursting disk ........................................................................nickelspring ......................................................................................steeldamping ...............................................................................PA 6.6
section: B - B
not included in delivery:
adapter M12x1.5 - G1/8 VK 200/1230 .......................................contact pressure gauge VK 200/1230 .......................................dip tupe VK 200/1230 for valves DN49 .....................................(dip tupes are to be shortened as necessary in acc. to specifieddimension given of the extinguishing agent cylinder)
release devices VK 200/1230:- electrical ........................................................................................- electrical with mech. blocking device .....................................- pneumatic .....................................................................................- pneumatic/manual ......................................................................- manual ..........................................................................................
Technical Data Sheet:
Valves B0481-A25 and B0481-A DN49, VK 200/1230dimensions in mm (inch); weight in kg (lbs)
(wrench size 2.60)
(3.5)
(9.4
1)
(2.8
3)
(1.9
3)
(3.74)
(3.64)
(3.19) (1,1
0) (
1.3
8)
(3.9
2)
(2.5
6)
(3.6
2)
G307011
1134 - CPD - 1007
8/10/2019 VK200 - Complete Datasheets.pdf
14/50
M4-02-07-2/04.0
9/I00/2010-11-16/1-1
Technical Data Sheet:
Valves B0481-B25 and B0481-B DN49 with integrated electrical
release VK 200/1230 * not ULdimensions in mm (inch); weight in kg (lbs)
designation order no.working pressure
at 21 C
weight
approx.
B0481-B25 DN49 88 7967 25 bar (360 psi)
valve with integrated B0481-B DN49 88 7665 50 bar (725 psi) 9.3 (20.5)
technical data:
extinguishing agent ....VK 200 (HFC 227ea), VK 1230 (FK-5-1-12)nominal diameter ........................................................DN49 (2")............(free cross-sectional area at minimum flow path 1515 mm.........................................................................................(2,348 in2))operating temperatureVdS/CE........................-20 C up to +50 C (-4 F up to 122 F)FM ............................... -18 C up to +50 C (0 F up to 122 F)max. working pressure at 50 C (122 F):- valve B0481-B25 DN49 .................................35 bar (508 psi)- valve B0481-B DN49 .....................................60 bar (870 psi)to be used for steel cylinder ...................from 80.0 l to 180.0 l
technical data:
integrated electrical release:- voltage ...........................................................................24 V DC- current intensity ...................................................0.25 A 10 %- output ..................................................................................0.6 W- protection category ................................. ...........................IP 54- duty cycle ...........................................................................100 %
section: B - B
material / surface:
housing, adapter, screws ...................................................brassspindles, seal retainer ........................................................brassO-ring / seal of seat .............................................................NBRbursting disk ......................................................................nickelspring ..................................................................................steeldamping ............................................................................PA 6.6
not included in delivery:
adapter M12x1,5 - G1/8 VK 200/1230 .......................................contact pressure gauge VK 200/1230 .......................................dip tupe VK 200/1230 for valves DN49 .....................................
(dip tupes are to be shortened as necessary in acc. to specifieddimension given of the extinguishing agent cylinder)
release devices VK 200/1230:- pneumatic .....................................................................................- pneumatic/manual ......................................................................- manual ..........................................................................................
section: A - A
(3.5)(3.7)
(9.2
5)
(7.1
8)
(3.74)
(3.64)
(1.9
3)
(1.1
0)(1.3
8)
(3.6
2)
(3.9
2)
(2.5
6)
(wrench size 4.17)
G307011
1134 - CPD - 1007
8/10/2019 VK200 - Complete Datasheets.pdf
15/50
M4-03-03-1/02.0
8/I00/2010-11-16/
1-1
designation order no. weight
release device pneumatic VK 200 17197 0.48 (1.1)
technical data:
operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL, FM .........................-18 Cup to +50 C (0 F up to 122 F)
note:
The actuating pressure must be applied for at least 5 seconds.The release device is equipped with two connections for pilotpipes to allow the control gas to be passed on to additionalrelease devices.
application:
Pneumatic actuation of extinguishing agent cylinder valves oftype B0481 and type B0482.One extinguishing agent cylinder valve each can be openendpneumatically.
section: A - A
Technical Data Sheet:
Release device VK 200/1230 pneumaticdimensions in mm (inch); weight in kg (lbs)
( 1.97)
( 1.77)
(0.52)
(1.9
7)
(1,69)
(wrench size 1.61)
(wrench size 1.81)
(0.1
535)
(0.3
228)
8/10/2019 VK200 - Complete Datasheets.pdf
16/50
M4-03-05-1_
V1_
V2/02.0
8/I00/2010
-11-16/1-1
designation order no. weight
release device manual VK 200 17098 0.41 (0.90)
application:
Manual actuation of extinguishing agent cylinder valves oftype B0481 and type B0482.One extinguishing agent cylinder valve each can be openendmanual.
section: A - A
Technical Data Sheet:
Release device VK 200/1230 manualdimensions in mm (inch); weight in kg (lbs)
technical data:
manual actuation .....................pound-force < 150 N (33.7 lbf)operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL, FM ........................-18 C up to +50 C (0 F up to 122 F)
note:
the manual actuation must take place for at least 5 seconds
(2
.13)
( 1.97)
(3.03)
(0.1
496)
(0.3
189)
8/10/2019 VK200 - Complete Datasheets.pdf
17/50
M4-03-04-1/02.0
8/I00/2010-11-16/
1-1
Technical Data Sheet:
Release device VK 200/1230 pneumatic/manualdimensions in mm (inch); weight in kg (lbs)
designation order no. weight
release device pneumatic/manual VK 200 17198 0.57 (1.26)
technical data:
manual actuation ...................................release force < 150 Noperating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM ..........................-18 C up to +50 C (0 F up to 122 F)
note:
The actuating pressure must be applied for at least 5 seconds.The release device is equipped with two connections for pilotpipes to allow the control gas to be passed on to additionalrelease devices.
application:
Pneumatic or manual actuation of extinguishing agentcylinder valves of type B0481 and type B0482.One extinguishing agent cylinder valve each can be openendeither manually or pneumatically.
section:A - A
(0.1
457)
(0.39)
(1.69)
(0.52)
(2.7
6)
(2.6
4)
(1.9
7)
( 1.77)
( 1.97)
(0.3
145)
(wrench size 1.81)
(wrench size 1.61)
8/10/2019 VK200 - Complete Datasheets.pdf
18/50
M4-03-01-1_
V1/04.0
9/I00/2010-11-
16/1-1
designation order no. weight
release device with diode VK 200 88 7667 2.49 (5.5)
release device without diode VK 200 16360 2.49 (5.5)
technical data:
nominal voltage ................................................24 V / DC 15 %nominal current ........................................................0.5 A 10 %IP code ...............................................................................IP65electrical connection .............................................................PG9max. permitted test current .............................................20 mAoperating temperature range............................................................................................-20 C up to +50 C (-4 F up to 122 F)UL ...........................-18 C up to +27.5 C (0 F up to 81.5 F)FM ................................-18 C up to +50 C (0 F up to 122 F)duration of connection .....................................100 % duty ratioactuation force at the contact with the plunger .........>= 500 Nholding force in resting state ...........................100 N to 250 N
note:
the electrical actuation signal must be present for at least5 seconds
application:
Electrical actuation of extinguishing agent cylinder valves oftype B0481 and type B0482.One extinguishing agent cylinder valve each can be openendelectrically by applying of the nominal voltage.
terminal connection
clamp 1: + poleclamp 2: - pole
solenoid
Technical Data Sheet:
Release device VK 200/1230 electricaldimensions in mm (inch); weight in kg (lbs)
(~5.5
1)
(~0.6
3)
( 2.56)
SW46
65
8/10/2019 VK200 - Complete Datasheets.pdf
19/50
M4-03-02-1/04.0
9/I00/2010-11-16/
1-1
designation order no. weight
release device with diode and mech. 88 7666 2.7 (5.95)
release device without diode 17196 2.7 (5.95)
technical data:
nominal voltage .................................................24 V / DC 15 %nominal current .........................................................0.5 A 10 %IP code ..............................................................................IP65max. permitted test current ..............................................20 mAoperating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)FM ................................-18 C up to +50 C (0 F up to 122 F)duration of connection .....................................100 % duty ratioactuation force at the contact with the plunger .........>= 500 Nholding force in resting state ...........................100 N to 250 Nmicro switches:- voltage ..........................................................................48 V / DC- current, ohmic load ................................................max. 1 A- IP code ..................................................................................IP67- change-over contact .........................................potential-free
note:
the electrical actuation signal must be present for at least5 seconds
application:
Electrical actuation of extinguishing agent cylinder valves oftype B0481 and type B0482.One extinguishing agent cylinder valve each can be openendelectrically by applying of the nominal voltage.
terminal connection
clamp 1: + poleclamp 2: - pole
solenoid
Technical Data Sheet:
Release device VK 200/1230 electrical with mech. blocking
device * not ULdimensions in mm (inch); weight in kg (lbs)
(4.4
3)
(4.6
2)
(
2.8
3)
8/10/2019 VK200 - Complete Datasheets.pdf
20/50
M3-09-10-2/02.0
9/I00/2010-11-16/
1-2
Technical Data Sheet:
Pneumatic release device PAE - CO2electrical *not FM
dimensions in mm (inch); weight in kg (lbs)
application:
for triggering of cylinder banks, selector valves, pneumaticalarms (4 kg CO2per makrofone VK-1) and pneumaticdoor holding devices
operating temperature:.....................................-20 C up to +50 C (-4 F up to 122 F)UL ................................-18 C up to +50 C (0 F up to 122 F)
included in delivery:
PAE - CO2- 5.4 l / 10.7 l ...........................................see page 2protective cover PAE ........................................................88 5322as well as fastenings
designation order no. h weight
5.4 l 88 5335 900 (35.43) 30 (66)without reserve
10.7 l 88 5341 1310 (51.57) 38 (84)
5.4 l 88 5337 900 (35.43) 47 (104)PAE - CO2- EM complete
with reserve10.7 l 88 5343 1310 (51.57) 63 (139)
without reserve with reserve
PAE - CO2- EM complete (with protective cover)
not included in delivery:
support weighing device PAE ........................................88 6350reset tool ...........................................................................88 5530monitoring loss at pneumatic release device PAE .......88 8998monitoring for release device EM ................................88 5740
(22.83)(22.83)
(15.75) (15.75)
8/10/2019 VK200 - Complete Datasheets.pdf
21/50
M3-09-10-2/02.0
9/I00/2010-11-16/
2-2
technical data:
medium ..................................................................CO2- gaseousoperating pressure .......................................140 bar (2031 psi)test pressure ..................................................210 bar (3046 psi)amount filled .....................4 kg to 8 kg (7.94 lbs to 17.64 lbs)thread connection..for precision steel pipe 6x1 (0,236 to 0,039)
operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL ................................-18 C up to +50 C (0 F up to 122 F)
designation order no. h weight
5.4 l 88 5334 900 (35.43) 26 (57)without reserve
10.7 l 88 5338 1310 (51.57) 34 (75)
5.4 l 88 5336 900 (35.43) 43 (95)PAE- CO2- EM
with reserve10.7 l 88 5342 1310 (51.57) 59 (130)
without reserve with reserve
PAE - CO2- EM (without protective cover)
Technical Data Sheet:
Pneumatic release device PAE - CO2electrical *not FM
dimensions in mm (inch); weight in kg (lbs)
note:
Each PAE has to be installed complete with protective coveronly. Exception: If an additional protecting guard is provided(for example enclosure).
(22.83)
(15.75)
(22.83)
(15.75)
8/10/2019 VK200 - Complete Datasheets.pdf
22/50
M3-11-03-1/06.0
3/I00/2010
-11-16/1-1
Technical Data Sheet:
monitoring loss pneumatic release device PAEdimensions in mm (inch); weight in kg (lbs)
application:
Electrical monitoring of the weighing device WE4.If the permissible margin of loss is exceeded (5% - 10% supplyper control cylinder) the beam weight falls and actuates a reedcontact limit switch. The limit switch sends a fault message tothe monitoring control panel and the fault is indicated locallyvia LED.
operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM............................-18 C up to +50 C (0 F up to 122 F)
included in delivery:
reed contact limit switch .............................................88 6343magnet bracket for WA loss PAE ................................87 6875bracket limit switch monitoring loss PAE WE4 ..............88 8986as well as screws, nuts and washers
designation order no. weight
monitoring loss pneumatic releasedevice PAE
88 8998 0,20 (0,44)
8/10/2019 VK200 - Complete Datasheets.pdf
23/50
M3-02-20-1/02.0
9/I00/2010-11-16/
1-2
Technical Data Sheet:
Release device EM reset tool and bracket for reset tooldimensions in mm (inch); weight in kg (ibs)
technical data:
operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)
solenoid:- magnetic force ................................ ....................................44 N- switching duration ........................................................100 %- voltage ....................................................24 V DC / 230 V AC- current ....................................................... .........1.04 A / 0.12 A- stroke ................................. .................................. .9 mm (0.35 ")- IP code ............................................................................IP 54
(by accordingly covering of the pull and pressure rod side)
application:The release device EM may be used only in accordancewith system approval in stationary CO
2,Argon and nitrogen
fire extinguishing systems (max. 235 bar operating pres-sure). It is used for electrical release of cylinder valves.
designation order no. weight
release device EM 24 V DC 88 5738 1.8 (3.97)
not included in delivery:
reset tool for release device EM .................................see belowbracket for reset tool release device EM ....................see belowmonitoring for release device EM ................................88 5740
(~7.48)
( ~
4
. 7 2 )
(0.118 0.039)
8/10/2019 VK200 - Complete Datasheets.pdf
24/50
M3-02-20-1/02.0
9/I00/2010-11-16/
2-2
designation order no. weight
reset tool release device EM 88 5530 0.31 (0.68)
bracket reset tool release device 88 6367 0.32 (0.71)
bracket for reset tool release device EM ..........steel, galvanized
reset tool for release device EM bracket for reset tool release device EM
Technical Data Sheet:
Release device EM reset tool and bracket for reset tooldimensions in mm (inch); weight in kg (lbs)
( 1.42)
( 1.9)
( 0.39)
(2.76)
(3.9
4)
(3.3
5)
(2.4
4)
(3.
74-5.5
1)
8/10/2019 VK200 - Complete Datasheets.pdf
25/50
8/10/2019 VK200 - Complete Datasheets.pdf
26/50
M3-04-00-1/01.0
9/I00/2010-11-16/
1-1
Technical Data Sheet:
selector valve DN25 - 50 compl.pneum., VK 200/1230dimensions in mm (inch); weight in kg (lbs)
note:
to closure of a manifold branch are needed followingcomponents:
- blind cap DN50 ................................................87 3746 (stock)- O-ring 54 x 3 NBR 70 Shore ............................84 7059 (stock)- cap nut DN50 ...................................................87 0630 (stock)
Pos. designation order no. weight
1 selector valve see selector valve DN 25-50
2 manifold HP see manifold HP-DN50
3 limit switch see limit switch US 432y/434y
4 VK 200/ 1230 safety valve 88 8007 -
5 plug 77 4822 0.05 (0.11)
-pipe support B DN50 complete (M1-16-00)
77 4639 0.77 (1.7)
- manual release lever, 497 mm long 86 0346 1.2 (2.6)
- installation instruction 86 0863 -
Odering advice:
The manifold sets with pneumatic release can be put togetherindividually. The components can be ordered from stock usingthe order no.
operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)
8/10/2019 VK200 - Complete Datasheets.pdf
27/50
M3-04-00-2/01.0
9/I00/2010-11-16/
1-1
Technical Data Sheet:
selector valve DN25 - 50 VK 200/1230dimensions in mm (inch); weight in kg (lbs)
technical data:
type ......................................................................................VK-BVagent ......................................................HFC-227ea / FK-5-1-12operating temperature rangeVdS/CE........................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)working pressure / test pressure:- pneumatic release device ....................................................................20 up to 140 bar / 210 bar (290 up to 2031/ 3046 psi)flow characteristics (selector valve):- DN25 ....................................equivalent length 0.18 m (7.09")- DN40 .................................equivalent length 0.27 m (10.63")- DN50 .................................equivalent length 0.37 m (14.57")
not included in delivery:
limit switch ...........................................................US 432y / 434y
designation DN(inches)
order no. RDIN2999
L weight
25 (1) 88 5189 R1 17.0 (37.5)
40 (1 ) 88 5191 R1.1/2790 (31.10)
20.5 (45.2)selector valve VK-BV
50 (2) 88 5192 R2 805 (31.92) 24.8 (54.7)
G393001
0786 - CPD - 3004
8/10/2019 VK200 - Complete Datasheets.pdf
28/50
M8-3-02-20-1/02.0
9/I00/2010-11-16/1-1
Product information:
Selector valve DN25 - 50 compl. pneum., VK 200/1230
Installation of limit switch bracket move lever item 3.5 up to its end position
align bracket item 3.16 so that plunger item 16.7 lies loosely on excenter of lever item 3.5 (see detail "X")
functional test
Components1 manifold DN502 termination (order no. 88 6118)3 selector valve VK-BV 25,40,50
3.5 lever VK-BV3.8 O-ring3.16 limit switch bracket3.17 pipe clip3.18 hex. screw M10x803.19 washer A10.53.20 hex. nut M103.24 washer DIN6798 A10.5
4 threaded plug5 safety valve
Installation instructions: manifold with selector valve HP DN25 - 50 pneumatic actuation
8/10/2019 VK200 - Complete Datasheets.pdf
29/50
M3-04-01-3/01.0
9/I00/2011-01-31/
1-1
Technical Data Sheet:
Selector valves DN65 - 100 compl., pneumatic, CO2/ VK 200/1230dimensions in mm (inch); weight in kg (lbs)
ordering hints:
Manifolds DN65 - 100 pneumatic are manufactured individuallyfor each contract. Use form C10.40.80 (see documentationspecial extinguishing systems) for ordering.Primer coated or powder coated manifolds are to be orderedvia order number 40 0015. Galvanized manifolds are to beordered via order number 40 0016.
Listed system covered by UL-file EX6388 (CO2)1) the longer dimensions are valid for manifolds with min.
one selector valve DN1002) selector valves are delivered only in combination with complete manifolds
main components:
ball valves DN65 - DN100 ...........................................................release cylinder section valve .....................................................safety valve VK 200/1230 .............................................88 8007limit switch type US 432y and US 434y .....................................manifold rack - left ..........................................................81 7728
view: A - A
manifold rack - right ........................................................82 2583
technical data:
type ......................................................................................VK-BVagent ......................................................HFC-227ea / FK-5-1-12working pressure / test pressure:- pneumatic release device ............20 up to 140 bar / 210 bar.......................................................290 up to 2031 psi / 3046 psiflow characteristics (high pressure selector valve):- DN65 ................................equivalent length 0.43 m (16.93 ")- DN80 ................................equivalent length 0.55 m (21.65 ")- DN100 .............................equivalent length 0.67 m (26.38 ")operating temperature rangeVdS/CE........................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)...........................................................material and pressure testactuation .....................................................by pilot cylinder PAE
not included in delivery:
manual release lever, 600 mm long ...............................82 3976
designation DN (inch) L h
65(2 1/2)
203 / 270(7.99 / 10.63)
80(3)
350(13.78) 200 / 267
(7.87 / 10.51)manifold pneumatic
100(4)
450(17.72)
/ 250(--- / 9.84)
1)
(7.87) (7.87) (7.87)(13.78)
(5.91)
(5.12)
(5.91) (13.3
9)
(10.2
4/12.9
9)
(26.7
7)
(38.7
8)
(4") (2 1/2" / 3")
(~19.69)
G397004 0786 - CPD - 30005
2)
8/10/2019 VK200 - Complete Datasheets.pdf
30/50
8/10/2019 VK200 - Complete Datasheets.pdf
31/50
M3-04-00-3/01.0
9/I00/2010-11-16/
1-1
Technical Data Sheet:
Manifold HP - DN50 VK 200/1230dimensions in mm (inch); weight in kg (lbs)
technical data:
agent .....................................................HFC-227ea / FK-5-1-12operating temperature range
.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)finish pipe .............................coating DIN EN 10240 - t Zn o
tee piece ......................coating EN 12329 - Fe / Zn12
* deviation from nominal size because ofthread tolerances
feature order no. branchesLges.
approx.
L1(n x 250)
approx.
weight
DN50 - 2 88 5346 2 515 (20.28) 250 (9.84) 13 (29)
DN50 - 3 88 5347 3 765 (30.12) 500 (19.69) 19,5 (43)
DN50 - 4 88 5348 4 1015 (39.96) 750 (29.53) 26 (57)
DN50 - 5 88 5349 5 1265 (49.8) 1000 (39.37) 32,5 (72)DN50 - 6 88 5350 6 1515 (59.65) 1250 (49.21) 39 (86)
DN50 - 7 88 5351 7 1765 (69.49) 1500 (59.06) 45,5 (100)
DN50 - 8 88 5353 8 2015 (79.33) 1750 (68.9) 52 (115)
DN50 - 9 88 5354 9 2265 (89.17) 2000 (78.74) 58,5 (129)
DN50 - 10 88 5355 10 2515 (99.02) 2250 (88.58) 65 (143)
* *
(~9.84)
(n x 9.84)
8/10/2019 VK200 - Complete Datasheets.pdf
32/50
M3-04-01-6/02.0
9/I00/2010-11-16/1-1
technical data:
medium ...................................................................................CO2operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)
Ansicht / view: B
section: A-A
Technical Data Sheet:
Pilot control manifold CO2- DN15
dimensions in mm (inch); weight in kg (lbs)
sheets also applying:
safety valve G1/2 ..... ................................ .......................88 6282release device EM 24 V DC ...........................................88 5738
not included in delivery:
adapter for connecting CO2- Ermeto DN4 ...............82 7325DN8 ...............85 5425
(~9.06)
(~10.2
4)
(~11.0
2)
(~4.72) (~5.91) (~5.12) (~5.91) (~5.91)
branches order no. L weight
approx. approx.
2 83 0778 340 (13.38) 9.7 (21)3 83 0791 490 (19.29) 14.2 (31)
4 83 0808 620 (24.41) 17.7 (39)
5 83 0833 770 (30.31) 22.2 (49)
6 83 0857 920 (36.21) 26.8 (59)
7 83 0870 1050 (41.34) 30.2 (67)
8 83 0894 1200 (47.24) 34.7 (76)
9 83 0912 1350 (53.15) 39.3 (87)
10 83 0936 1480 (58.26) 42.7 (94)
11 83 0950 1630 (64.16) 47.3 (104)
12 83 0973 1780 (70.08) 51.8 (114)
13 83 0985 1910 (75.20) 55.2 (122)
14 83 0997 2060 (81.10) 59.8 (132)
15 83 4115 2210 (87.01) 64.3 (142)
(~6.6
9)
8/10/2019 VK200 - Complete Datasheets.pdf
33/50
M4-04-09-1/02.0
8/I00/2010-11-16/
1-1
application:
manifold selector valve for VK 200/1230 systems
designation order no. weight
safety valve G1/2 - 66 bar 88 8007 1.2 (2.65)
Technical Data Sheet:
Safety valve G1/2 - 66 bardimensions in mm (inch); weight in kg (lbs)
technical data:
type ..........................................................................4373.2602medium ................................HFC-227ea, FK-5-1-12, nitrogenresponse pressure ...............................max. 66 bar at +50 C........................................................................(-957 psi at 122 F)operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)thread ...............................................................in acc. to ISO 228test certificate ...................EN 10204 - 3.1 (response pressure)position of device ................. ........ ................ ................. .vertical
safety valve according to pressure equipment directive97/23/EC category IV
(1.18)
(0.39)(0.5
9)
(5.3
9)
(1.3
0)
(wrench size 1.42)
8/10/2019 VK200 - Complete Datasheets.pdf
34/50
M3-02-14-1/02.0
9/I00/2010-11-16/
1-1
Technical Data Sheet:
Safety valve G1/2 - 140 bardimensions in mm (inch); weight in kg (lbs)
technical data:
type ...............................................................................4373.2612medium ..................................................................CO2- gaseousresponse pressure .....140 bar at +50 C (-2031 psi at 122 F)operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)flow rate .....................................approx. 3014 Nm/h, gaseousthread ................................................................in acc. to ISO 228test certificate .......................EN 10204 - 3.1 (response pressure)
position of device ...............................................................vertical
safety valve according to pressure equipment directive97/23/EC category IV
designation order no. weight safety valve G1/2 - 140 bar 88 6282 1.2 (2.65)
(1.18)
(wrench size 1.42)
(0.5
9)
(5.3
9)
(1,3
0)
(0.39)
8/10/2019 VK200 - Complete Datasheets.pdf
35/50
M4-04-05-1/05.0
8/I00/2010-11-1
6/1-1
technical data:
type .................................................................................VK-CRmedium .................................HFC 227ea, FK-5-1-12, nitrogennominal diameter ...............................................................DN50connection thread inlet ...................................Rp 2 EN 10226
outlet ......................................Rc 2 ISO 7operating pressure ............................................60 bar (870 psi)opening pressure .........................................3 bar ( 43.5 psi)
temperature rangeVdS/CE.....................-20 C up to +50 C (-4 F up to 122 F)UL, FM ......................-18 C up to +50 C (0 F up to 122 F)
designation order no. weight
check valve DN50 VK-CR 17153 5.15 (11.35)
material / surface:
housing ............................................................steel, galvanizedinternal components ............................................stainless steelspring ...................................................................stainless steelseal ......................................................................................NBR
application:
The check valve VK-CR allows the extinguishing agent to flow
in the flow direction and prevents its flow in the oppositedirection. It is fitted between the valve of the fire extinguishingagent cylinder and the manifold.
Technical Data Sheet:
Check valve type VK-CR - VK 200/1230dimensions in mm (inch); weight in kg (lbs)
(~6.69)
8/10/2019 VK200 - Complete Datasheets.pdf
36/50
M3-06-03-1/02.0
9/I00/2010-11-16/
1-1
Technical Data Sheet:
Shuttle non-return valves VK-WRV DN4 and DN8dimensions in mm (inch); weight in kg (lbs)
technical data:
agent ......................................................................CO2- gaseousoperating pressure ..........2 up to 140 bar (29 up to 2031 psi)test pressure ..................................................210 bar (3046 psi)rate of pressure rise ............................min. 3 bar/s (43.5 psi/s)position of device ................................feedings only horizontaloperating temperature rangeVdS/CE.......................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)
material / surface:
housing ..........................................................................aluminiumgasket .....................................................................................NBR
ball ...........................................................................stainless steel
DNorder no. for pipe weight
4 88 6247 6 x 1 (0.236 x 0.039) 0.25 (0.55)
8 88 6248 10 x 1 (0.393 x 0.039) 0.24 (0.53)
(4.13")
(2.3
6")
G303002
0786 - CPD - 30008
8/10/2019 VK200 - Complete Datasheets.pdf
37/50
M4-04-01-1/02.0
8/I00/2010-11-1
6/1-1
Technical Data Sheet:
Hose DN4 - VK 200/1230dimensions in mm (inch); weight in kg (lbs)
desi gnati on order no . L weig ht
DN4 x 600 16376 600 (23.62) 0.2 (0.44)
DN4 x 1000 16377 1000 (39.37) 0.3 (0.66)hose - VK 200/1230
DN4 x 1500 16378 1500 (59.06) 0.4 (0.88)
technical data:
type ................................DN 4 x 600/1000/1500 - MX 200/1230operating medium ..........HFC-227ea, FK-5-1-12, nitrogen, CO
2
nominal diameter ..............................................DN4 (0.157 ")minimum bending radius ................................90 mm (3.54 ")temperature rangeVdS/CE...................-40 C up to +60 C (-40 F up to 140 F)UL, FM ......................-18 C up to +50 C (0 F up to 122 F)operating pressure ....................................160 bar (2321 psi)test pressure .............................................240 bar (3481 psi)burst pressure ...........................................480 bar (6962 psi)ferrule .....................PN 04 AOL conical nipple 24 with O-ring................metric (DKOL) steel galvanized yellow chrome dulled
test certificate .............................EN 10204 - 3.1 (pressure test)
application:
to connect:- the master extinguishing agent cylinder and the
pneum. release devices of other extinguishing agent cylinder
- two pneumatical release devices
- the pneumatical release device and the pilot pipe of multi zonesystems
(L +0.2)
8/10/2019 VK200 - Complete Datasheets.pdf
38/50
M4-04-03-1_
V1/02.0
8/I00/2010-11-
16/1-1
desi gnation order no. L SW1 SW2 weigh t
DN40 16379 825 (32.48) 3.1
DN40 90 16380 450 (17.72)60 (2.36)
50(1.97) 3.1
DN50 16381 1000 (39.37) 5.5hose - VK 200/1230
DN50 90 16382 520 (20.47)
70/75(2.76/2.95)
65(2.56) 6.0
technical data:
type DN 40 / DN50 .....................DN 40 / DN50 VK 200/1230DN 40 90 / DN50 90 ...DN 40 / DN50 VK 200/1230 90
operating medium ..................HFC-227ea, FK-5-1-12, nitrogennominal diameter ...........................DN40 / DN50 (1 1/2 " / 2 ")minimum bending radius ............................................................
DN40 / DN50 .....................500 mm / 630 mm (19.69 / 24.80)thread G1 / G2 DN40 ..1.7/8"-12 UNF [B1.1] / R 1.1/2" [ISO 7]DN50 .......2.1/2"-12 UNF [B1.1] / R 2." [ISO 7]
temperature rangeVdS/CE.....................-40 C up to +60 C (-40 F up to 140 F)UL, FM ........................-18 C up to +50 C (0 F up to 122 F)operating pressure ........................................80 bar (1160 psi)test pressure .................................................120 bar (1740 psi)burst pressure ..............................................240 bar (3481 psi)test certificate ............................EN 10204 - 3.1 (pressure test)
DN40 / DN50
DN40 90 / DN50 90
application:
to connect the valve of the extinguishing agent cylinder to thenozzle pipe, the manifold, or the check valve
*
* at the manufactures option
Technical Data Sheet:
Hose DN40 and DN50 VK 200/1230dimensions in mm (inch); weight in kg (lbs)
( 1 1/2" / 2 ")
( 1 1/2" / 2 ")
8/10/2019 VK200 - Complete Datasheets.pdf
39/50
M4-04-06-1-MX200/01.1
0/I00/2011-09-06/1-1
Technical Data Sheet:
Contact pressure gauge VK 200dimensions in mm (inch); weight in kg (lbs)
electrical data:
switching voltage .......................................4.5 24 V DC / VACswitching current ......................................................5 100 mAcontact load ..............................................max. 3 W, dry contactconducting wire ............................two-core, 100 cm (39.37 ")cross-section of conducting wire .............0.5 mm (0.0196 ")
design of instrument dial:
material ............................................................aluminium, whiteindicating range ...........................................0 to pressure rangeindicating range marked:I......................pressure at minimum temperature 0 F (18 C)II to III.....pressure from 90 % to 110 % from charging pressureIV.........................pressure at max. temperature 122 F (50 C)front plate colour marking:
0 to I .............................................................................rechargeI to II ......................................................................................redII to III ................................................................................greenIII to IV ...................................................................................redIV to max. .................................................................overcharge
max. pressure
psi (bar)
order no. switching point
NC / NO
operating pressureat
70 F (21 C)
weight
725 (50) 88 9306 324 (22.5) NO 360 (25) 0.17 (0.37)
1015 (70) 88 9307 549 (37.8) NO 610 (42)* 0.17 (0.37)
1160 (80) 88 9309 653 (45) NO 725 (50) 0.17 (0.37)
725 (50) 88 9311 324 (22.5) NC 360 (25) 0.17 (0.37)
1015 (70) 88 9312 549 (37.8) NC 610 (42)* 0.17 (0.37)
1160 (80) 88 9313 653 (45) NC 725 (50) 0.17 (0.37)
1)
1)
spare parts: O-ring .....................................................88 8023supporting ring O-ring ............................88 8024
note switching mode:
break contact (NC) / make contact (NO):Break contact or make contact by actuation of the indicatorcounter clockwise at the switch pressure (decrease ofpressure).
technical data:
pressure medium ............................................N2, HFC-227ea
nominal size ............................................................................50accuracy class .......................................................................1.6temperature ranges:..................................measuring medium max. +60 C (140 F)IP code ................................................IP65 with mounted cablemeasuring network, motion work ............................copper alloy
(0.79)
(0.98)
(0.07)
not UL / FM*
SW 14
supporting o-ring
0-ring
20
25
2
FK 5-1-12
III III
IV
HFC-227ea
8/10/2019 VK200 - Complete Datasheets.pdf
40/50
8/10/2019 VK200 - Complete Datasheets.pdf
41/50
M4-04-02-1/03.0
9/I00/2010-11-16/
1-1
application:
to the connection of the hose DN4 / pilot pipe with:- valves type B0481, valves type B0482- valves type B0480, BAS- release device VK 200/1230 pneumatic/manual- release device VK 200/1230 pneumaticoperating temperature range
operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)
designation order no. weight
adapter M12x1,5 - G1/8 VK 200 88 7644 0.018 (0.04)
Technical Data Sheet:
adapter M12x1,5 - G1/8 VK 200/1230dimensions in mm (inch); weight in kg (lbs)
(1.08)
(wrenchsize0.5
5")
8/10/2019 VK200 - Complete Datasheets.pdf
42/50
M3-10-04-1/02.0
9/I00/2010-11-16/1-1
Technical Data Sheet:
Makrofon VK-1dimensions in mm (inch); weight in kg (lbs)
technical data:
operating medium ................................................CO2,gaseousoperating temperature rangeVdS/CE.....................-20 C up to +300 C (-4 F up to 572 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)consumption ......................approx. 75 g/min. (0.165 lbs/min.)............................................................. (at ambient temperature)sound pressure at 8 bar ....................................110 dB (A) 1 mminimum start pressure .....................................8 bar (116 psi)supply pressure, min. ............................................4 bar (58 psi)supply pressure, max. .................................140 bar (2031 psi)frequency ........................................................................600 Hzconnection .....................................................................................................for precision drawn steel pipe 6 x 1 (0.236 x 0.039 ")
included in delivery:
makrofon complete with bracket for fastening .........................
not included in delivery:
clamping bolt for wall mountingsilencer makrofon VK-1 ................................................87 7120
designation order no. weight
Makrofon VK-1 86 0050 1.15 (2.54)
(~4.7
2)
(~ 12.40)
(
4.4
9)
G310017
8/10/2019 VK200 - Complete Datasheets.pdf
43/50
8/10/2019 VK200 - Complete Datasheets.pdf
44/50
M3-09-00-4/02.0
9/I00/2010-11-16/
1-1
technical data:
agent ...........................................................................CO2, Ar, N2nominal diameter ..................................................DN6 (0.236 ")operating pressure ......................................140 bar (2031 psi)operating temperature rangeVdS/CE......................-30 C up to +80 C (-22 F up to 176 F)
UL/FM .........................-18 C up to +50 C (0 F up to 122 F).......................................................................................1.4301connection..............................................cone for 6 mm (0.236 ") steel pipe
designation order no. weight
disable device VK 87 8070 0.8 (1.76)
A = output
B = venting
P = input
P&ID symbol
Technical Data Sheet:
Disable device VKdimensions in mm (inch); weight in kg (lbs)
included in delivery:
disable device style VK DN6 .........................................88 5375padlock 635/40 .................................................................13 1777retainer shuttle valve ........................................................87 3497as well as fastening material
not included in delivery:the following must be ordered separately for monitoring ofeach ball valve position:limit switch type ZS 256-11Z ..............................................82 84822 x cheese-head screw DIN84-M4x25-brass ............10 67452 x washer DIN125-B 4,3 brass .......................................10 9734
(3.62)
(4.21)
(1.1
8)
G301010
0786 - CPD - 30009
8/10/2019 VK200 - Complete Datasheets.pdf
45/50
M3-09-10-3/03.0
2/I00/2010-11-16/
1-1
Technical Data Sheet:
Support weighing device PAEdimensions in mm (inch); weight in kg (lbs)
material .....................................spring wire, EN 10270-1-2,5 Z
application:
- ease of assembling / disassembling of the pilot cylinder (PAE)resp. extinguishing agent cylinder (one-cylinder system)
- prevention of loss indication during cylinder assembling /cylinder disassembling
designation order no. weight
support weighing device PAE 88 6350 0.02 (0.04)
(6.3
)
(3.82)
8/10/2019 VK200 - Complete Datasheets.pdf
46/50
M4-04-04-1_
V1_
V2/02.0
8/I00/2010-
11-16/1-1
application:
rigid connection between the valve of the extinguishing agentcylinder and the downstream piping
designation order no. G1 G2 weight
DN40 17102 R 1.1/2 1.7/8-12 UN 1.0 (2.2)connection piece VK 200/1230
DN50 17101 R 2 2.1/2-12 UN 1.3 (2.87)
Technical Data Sheet:
Connection piece DN40 and DN50 VK 200/1230dimensions in mm (inch); weight in kg (lbs)
technical data:
external thread ...........................................tapered, thread sealinternal thread ..........................UN-nut thread, 74 conical holematerial ...............................................steel, galvanized coated
8/10/2019 VK200 - Complete Datasheets.pdf
47/50
M3-04-01-7/02.0
2/I00/2010-11-16/
1-1
material / surface:
knurled screw .................................................brass, nickel platednon-return valve .................................................steel, galvanized
application:
venting of release pipes
designation order no. weight
push-button selector valve 82 2674 0.16 (0.35)
Technical Data Sheet:
Push-button selector valvedimensions in mm (inch); weight in kg (lbs)
technical data:
agent ......................................................................CO2- gaseousoperating pressure .....................................140 bar ( 2031 psi)operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)thread connection ..........for precision-drawn steel pipe 10 x 1................................................................................(0.393 x 0.039)position of device ..........................................................as desired
(2.9
5)
(wrench size 0.75)
(wrench size 0.95)
8/10/2019 VK200 - Complete Datasheets.pdf
48/50
M3-06-09-1_
V1_
V2/02.0
7/I00/2010
-11-16/1-1
Technical Data Sheet:
Limit switch pneum. operateddimensions in mm (inch); weight in kg (lbs)
Operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)
included in delivery:
cylinder 25 x H30 .........................................................22 7303limit switch type US 432y ..............................................72 4420support limit switch pneum. activated ............................82 7866union GE 6-PSR-ED A3C .............................................12 5578
2x cheese-head screw DIN84-M5x25-Ms .....................10 69152x hex. nut DIN934-M5-Ms ............................................10 84442x washer DIN125-B-5.3-Ms .........................................10 9771as well as fastening material
designation order no. weight
limit switch pneum. operated 17103 1.5 (3.31)
~100
~290
pressureconnectionfor pipe 6 mm (0.236)
(~1
1.4
2)
G 1/4
( ~ 3.94)
8/10/2019 VK200 - Complete Datasheets.pdf
49/50
M3-04-07-3/05.0
2/I00/2010-11-16/
1-1
technical data:
type ...........................................................ZS 256-11z-M20-2219housing ....thermopl. glass fiber concentrated, self-quenchingIP rating ...................................................................................IP67contact material .....................................................................silvercontacts .......................................................................1 NC, 1 NO
.............................................galvanically isolated contact bridgesoperating temperature range.....................................-30 C up to +80 C (-22 F up to 176 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)switch system ...................................................spring control with...........................................twofold brake contacts, forced opener
designation order no. weight
limit switch ZS 256-11Z-M20-2219 82 8482 0.065 (0.14)
circuit diagram:
t
nominal isolation voltage ..................................................500 Vpermanent current .................................................................10 Anominal operation current / voltage ....................4 A (230 V AC);....................................................2.5 A (400 V AC); 1 A (500 V AC)short-circuit protection ..............10 A slow blow, 16 A quick blow
actuation force ................................................................min. 9 Nmechn. durability .....................................20x106switching cyclesoperation speed ...............................max. 1 m/s, min. 0.01 m/stime on in percent...................................................max. 5000 / h
Technical Data Sheet:
Limit switch type ZS 256dimensions in mm (inch); weight in kg (lbs)
(2.28) (1.22)
(1.9
9)
8/10/2019 VK200 - Complete Datasheets.pdf
50/50
7-2_
V1/05.0
2/I00/2010-11-
16/1-1
Technical Data Sheet:
Limit switch type US 432y and US 434ydimensions in mm (inch); weight in kg (lbs)
technical data:
housing ........alloy die-cast metal, chrome dulled and varnishedIP rating ...................................................................................IP65contact material .....................................................................silverswitch system ...............................................................slow action.............................................................with twofold brake contactsoperating temperature range.....................................-20 C up to +60 C (-4 F up to 140 F)UL/FM ..........................-18 C up to +50 C (0 F up to 122 F)nominal isolation voltage ..................................................500 Vpermanent current ...............................................................16 Anominal operation current ....................................6 A, 400 V AC
type US 432y
type contacts1)
order no. actuation force2)
approx.
weight
US 432y-M20-2352 2 72 4420 max. 7 N 0.31 (0.68)
US 434y-M20-2352 4 22 4831 max. 100 N 0.42 (0.93)
type US 434y
1) optional adjustable2) effeciency of the switch way
technical data:
short-circuit protection ............ ...16 A slow blow, 20 A quick blowoperation speed .............................max. 1 m/s, min. 0.001 m/stime on in percent.................................................max. 3000 / hmechn. durability .....................................10x106switching cyclescontact spud durability ..............................2x106switching cycles......................................................at 6 A / 400 V AC, cos= 0.4
application:
limit switch pneum. operated, manifold set, selector valve
note: actuate limit switch axially
type US 434ytype US 432y
wiring diagram:
(2.44) (1.97)
(2.44) (1.97)
(5.0
0)
(3.1
5)
A or B