VK200 - Complete Datasheets.pdf

8/10/2019 VK200 - Complete Datasheets.pdf

1/50

M4-12-01

-2-MX200

/02.1

0/I00/

2011-09-06

/1-1

XXX 200 Fire Extinguishing System

Extinguishing agent XXXHeptafluoropropaneacc. to ISO 14520-9 - HFC 227eaSuitable for fire classes A, B and C

Contains fluorinated greenhouse gases covered by KyotoProtocol, GWP 3500

Dangerous goods classificationHI/UN 20/3296EWC - Code: 160501

Manufacturer / private labeler Extinguishing agent

WWW WWWXXX XXXYYY YYYZZZ ZZZ

Warning: Pressurized Extinguishing Agent - Read Instruction Carefully!

weight cylinder, full(incl. valve, without protection cap)

weight cylinder, empty(incl. valve, without protection cap)

system pressure at 70F (21C)

max. tolerable weight loss

weight extinguishing agent

Project number

date of first filling /

sign of first filler

Systemto be installed and maintainedinaccordance with

NFPA 2001,NationalFire Protection AssociationStandard onClean AgentFire Extinguishing Systems

ISO14520,Gaseous fire-extinguishingsystemsPhysical properties and systemdesignPart 9:HFC 227eaextinguishant

Fi ll in g st at io n: C yl in de r, f ac to ry t es t pr ess ur e

WWW DOT-4BW cylinder:XXX Cylinder tested at 2 times the marked service pressure

YYY DOT-3AA cylinder:ZZZ Cylinder tested at 5/3 times the marked service pressure

European cylinder accordingto directive 1999/36/EC:Cylinder tested to markedtest pressure

order no.

>>to be filled outby the filling station>to be filled out by the installer>to be filled out by the filling station


2/50

M4-18-06

-1-MX200

/03.1

0/I00/

2011-09-08

/1-1

FM

200

FE

227

ea

text order no. weight CAUTION!This area is protected by a VK 200 fi resuppression system.When the fire alarm sounds, or in theevent of a FIRE and system discharge,EVACUATE hazard area immediatelyand DO NOT re-enter until area isthroughly ventilated.

17435

CAUTION!This area is protected by a VK200 fi resuppression system.In the event of a fire and systemdischarge, CAUTION must be taken toavoid exposure to products ofcombustion. DO NOT enter without anapproved self-contained breathingapparatus or until area is throughlyventilated.

17436

0.12 (0.26)

Technical Data Sheet:

Labels VK 200 - UL Caution! ........dimensions in mm (inch); weight in kg (lbs)

technical data:

material ............aluminium plate 1.0 mm (0.039 ") thicknessscript type ...................................................Helvetica medium facemanufacturers sign ..............................................................blue


3/50

M4-12-01-1-MX200/02.1

0/I00/2011-09-06/1-2


Extinguishing agent cylinder VK 200 22.0 l and 40.0 ldimensions in mm (inch); weight in kg (lbs)

valve type A / A25:B0482-A DN33

B0482-A25 DN33

valve type B / B25:B0482-B DN33

B0482-B25 DN33

nominal volume ~L D 3

22.0 l970

(35.19)229

(9.00)

40.0 l1450

(57.09)229

(9.00)

dimensions:

order informations:

The order has to specificed with the filling quantity.The extinguishing agent VK 200 (HFC-227ea) must beordered additionally.

A / A25 = valve B0482-A DN33 /valve B0482-A25 DN33 (for 25 bar)

B / B25 = valve B0482-B DN33 /valve B0482-B25 DN33 (for 25 bar)

(valves with integrated electrical release)

1)

2)

with integrated electrical release)

amount filledempty

weightpressure

at 21 C

(70 F)

nominalvolume

order no.

valve type min. max.

A / A25 B / B25 *not UL CE /VdS UL /FM VdS UL / FM / CE approx.

22.0 l(55 lbs)

16421 88 84559 kg

(19.84 lbs)11 kg

(24.30 lbs)22.9 kg

(50.50 lbs)25.1 kg

(55.40 lbs)50 (110)

25 bar(360 psi) 40.0 l

(100 lbs)16425 88 8458

16 kg(35.27 lbs)

20 kg(44.10 lbs)

41.6 kg(91.80 lbs)

45.6 kg(100.06 lbs)

59 (130)

22.0 l

(55 lbs) 16449 88 8460

9 kg

(19.84 lbs)

11 kg

(24.30 lbs)

22.9 kg

(50.50 lbs)

25.1 kg

(55.40 lbs) 50 (110)42 bar(610 psi)

*not UL / not FM 40.0 l(100 lbs)

16477 88 846216 kg

(35.27 lbs)20 kg

(44.10 lbs)41.6 kg

(91.80 lbs)45.6 kg

(100.60 lbs)59 (130)

22.0 l(55 lbs)

16501 88 84649 kg

(19.84 lbs)11 kg

(24.30 lbs)18.7 kg

(41.30 lbs)23.1 kg(51 lbs)

50 (110)50 bar

(725 psi) 40.0 l(100 lbs)

16505 88 846616 kg

(35.27 lbs)20 kg

(44.10 lbs)34 kg

(75 lbs)42 kg

(92.70 lbs)59 (130)

1)

2)

technical data:

fill ratio min.:CE/VdS ................................................. 0.4 kg/l (0.882 lbs/l)UL/FM ........................................................0.5 kg/l (1.1 lbs/l)fill ratio max.:VdS 25 bar (360 psi)

42 bar (610 psi) *not UL / FM....1.04 kg/l (2.293 lbs/l)

50 bar (725 psi) .................0.85 kg/l (1.874 lbs/l)

UL/FM/CE 25 bar (360 psi)


50 bar (725 psi) .................1.05 kg/l (2.315 lbs/l)

operating temperature range

................................-20 C up to +50 C (-4 F up to 122 F)UL/FM ..................... -18 C up to +50 C (0 F up to 122 F)


4/50

M4-12-01-1-MX200/02.1

0/I00/2011-09-06/2-2

steel cylinder approval with collective certificate by:- a notified body in acc. with directive TPED 1999/36/EC- GL (Germanischer Lloyd) in acc. with directive MED 96/98/EC- DOT / TC- GOST-Rnot included in delivery:

adapter M12x1.5 - G1/8 VK 200/1230 .........................17155contact pressure gauge VK 200/1230 ...................................clamp for extinguishing agent cyl. VK 200/1230 ..................

release devices VK 200/1230 for valve type A / A25- electrical ...............................................................................- electrical with mech. blocking device ...................................- pneumatic .............................................................................- pneumatic/manual ................................................................- manual ..................................................................................- tackle pneum./manual ..........................................................

release devices VK 200/1230 for valve type B / B25:- pneumatic .............................................................................- pneumatic/manual ................................................................- manual .................................................................................- tackle pneum./manual ..........................................................


Extinguishing agent cylinder VK 200 22.0 l and 40.0 ldimensions in mm (inch); weight in kg (lbs)


5/50


6/50

M4-12-05-1-MX200/02.1

0/I00/2011-09-06/2-2

2)

order informations:


A / A25 = valve B0481-A DN49 /valve B0481-A25 DN49 (for 25 bar)

B / B25 = valve B0481-B DN49 /valve B0481-B25 DN49 (for 25 bar)(valves with integrated electrical release)

approval with collective certificate by:- a notified body in acc. with directive TPED 1999/36/EC- GL (Germanischer Lloyd) in acc. with directive MED 96/98/EC- DOT/TC

GOST-R certificate of conformity acc. to ROSTECHNADZOR

technical data:

ffill ratio min.:CE/VdS ................................................. 0.4 kg/l (0.882 lbs/l)UL/FM ........................................................0.5 kg/l (1.1 lbs/l)fill ratio max.:VdS 25 bar (360 psi)


50 bar (725 psi) .................0.85 kg/l (1.874 lbs/l)



50 bar (725 psi) .................1.05 kg/l (2.315 lbs/l)

1)operating temperature range

................................-20 C up to +50 C (-4 F up to 122 F)UL/FM ..................... -18 C up to +50 C (0 F up to 122 F)

not included in delivery:

adapter M12x1,5 - G1/8 VK 200/1230 ..........................17155contact pressure gauge VK 200/1230 ...................................clamp for extinguishing agent cyl. VK 200/1230 ....................

release devices VK 200/1230 for valve type A / A25:- electrical ...............................................................................- electrical with mech. blocking device ...................................- pneumatic .............................................................................- pneumatic/manual ................................................................- manual .................................................................................- tackle pneum./manual ..........................................................

release devices VK 200/1230 for valve type B / B25:

- pneumatic .............................................................................- pneumatic/manual ................................................................- manual .................................................................................- tackle pneum./manual ..........................................................


Extinguishing agent cylinder VK 200 80.0 l - 180.0 ldimensions in mm (inch); weight in kg (lbs)


7/50

M4-12-05-1b-MX200/02.1

0/I00/2011-09-06/1-1


Extinguishing agent cylinder VK 200 52.0 l, 106.0 l, 147.0 ldimensions in mm (inch); weight in kg (lbs)

valve type A / A25:

B0482-A25 DN33 (52.0 l)

B0481-A25 DN49

valve type B / B25:

B0482-B25 DN33 (52.0 l)

B0481-B25 DN49

(with integrated electrical release)

order informations:


A25 = valve B0482-A25 DN33 (52.0) /valve B0481-A25 DN49

B25 = valve B0482-B25 DN33 (52.0) /valve B0481-B25 DN49(valves with integrated electrical release)

approval with collective certificate by:- DOT 4BW500

technical data:

ffill ratio min.:

CE/VdS ................................................. 0.4 kg/l (0.882 lbs/l)UL/FM ........................................................0.5 kg/l (1.1 lbs/l)fill ratio max.:VdS 25 bar (360 psi)


50 bar (725 psi) .................0.85 kg/l (1.874 lbs/l)



50 bar (725 psi) .................1.05 kg/l (2.315 lbs/l)

operating temperature range:- ................................-20 C up to +50 C (-4 F up to 122 F)- UL/FM .......................-18 C up to +50 C (0 F up to 122 F)


adapter M12x1,5 - G1/8 VK 200/1230 .........................17155contact pressure gauge VK 200/1230 ....................................clamp for extinguishing agent cyl. VK 200/1230 ....................

release devices VK 200/1230 for valve type A25:- electrical ...............................................................................- electrical with mech. blocking device ...................................- pneumatic .............................................................................- pneumatic/manual ................................................................- manual .................................................................................- tackle pneum./manual ..........................................................

release devices VK 200/1230 for valve type B25:- pneumatic .............................................................................- pneumatic/manual ................................................................- manual .................................................................................- tackle pneum./manual ..........................................................

2)

1)

amount filledempty

weightorder no.

valve type

~L ~D

min. max.

pressureat 21 C

(70 F)

nominal

volume

A25 B25 * not UL 3 CE/VdS UL/FM VdS UL/FM/CE approx.

52.0 l(130 lbs)

16529 88 90991440

(56.70)254(10)

20.8 kg(45.90 lbs)

26.0 kg(57.40 lbs)

54.1 kg(119.30 lbs)

59.3 kg(130.80 lbs)

49(108)

106.0 l(270 lbs)

16533 88 91011250

(49.21)406.6(16)

42.4 kg(93.60 lbs)

53.0 kg(116.90 lbs)

110.2 kg(243.20 lbs)

120.8 kg(266.60 lbs)

86(190)

25 bar(360 psi)

147.0 l

(370 lbs)16537 88 9104

1580

(62.20)

406.6

(16)

58.8 kg

(129.70 lbs)

73.5 kg

(162.10 lbs)

152.9 kg

(337.20 lbs)

167.6 kg

(369.60 lbs)

104

(229)

1)

2)


8/50

M4-04-07-1_

V1/02.0

8/I00/2010-11-

16/1-1


Clamp for extinguishing agent cylinder VK 200/1230dimensions in mm (inch); weight in kg (lbs)

designation order no. R B weight

52/80l (dia. 267) 17157 134 (5.28) 120 (4.72) 1.46 (3.2)

22/40l 17158 117 (4.60) 112 (4.41) 1.26 (2.8)

100l 17159 160 (6.30) 155 (6.10) 1.69 (3.7)

140l (dia. 356) 17160 180 (7.09) 175 (6.89) 1.87 (4.1)

clamp for cylinder VK 200

80/106/140/1 47/180l 17161 205 (8.07) 200 (7.87) 2.08 (4.6)

technical data:

material ..........................................................................steel stripfinish .........................................matt-finished or powder-coated..............................................................RAL 9011 graphite black

not included in delivery:fastening material

(1.97)

(0.98)

(2.3

6)

(0.53)


9/50


10/50

M4-01-01

-1-MX200

/02.1

0

/I00/

2011-09-06

/2-2


nozzles type CD, VK 200dimensions in mm (inch); weight in kg (lbs)

nozzle version order no. d L NPT D weight

Ms XCrNi min. max.

A* 88 9033 88 9046

B* 88 9034 88 9048

C** 17162 17168

6(0.236)CD 1/2

NPT

D** 17165 17171

3(0.118)

5(0.197)

55(2.165)

1/228

(1.102)0.2

(0.4)

A* 88 9038 88 9051

B* 88 9039 88 9052

C** 17163 17169

11(0.433)CD 1

NPT

D** 17165 17172

3(0.118)

10

(0.394)

65(2.559)

140

(1.575)0.4

(0.9)

A* 88 9042 88 9055

B* 88 9043 88 9056

C** 17164 17170

18(0.709)CD 1.1/2

NPT

D** 17167 17173

3(0.118)

16(0.630)

85(3.346)

1.1/255

(2.165)0.6

(1.3)

order informations:

for manufacturing, the nozzle bore diameter d must bestated within the permitted limits in 1/10 mm (0.004 inch)gradations

technical data:

type ..............................................................................CD VK 200

medium .......................................................VK200 HFC-227eaconnection thread Rp ..................in accordance with EN 10226connection thread NPT ..in accordance with ANSI/ASME B1.20.1operating pressure VdS .................................................................................... ...........min 9.6 bar (139 psi), max. 60 bar (870 psi)operating pressure CE/UL/FM...................................................................................min. 9 bar (131 psi), max. 60 bar (870 psi)required storage pressure in extinguishing agent container............................................dependent on system 25 bar (360 psi),......................42 bar (610 psi)* or 50 bar (725) at 21 C (70 F)nozzle body Ms .................................................................brass

XCrNi ............................................stainless steel

gradation of the bore hole diameters d ...........................................................................................in 0,1 mm (0.004 inch) stepsoperating temperature range ..............-20 C to +50 C UL/FM ...........-18 C to +50 C

note:

The 180 nozzle spray the extinguishing agent in a

semicircle and the 360 in a full circle around the nozzle.The dimensioning of the nozzle bore diameter takes placespecifically for the fire extinguishing system using acalculation program suitable for the extinguishing agent.Version A und B are for special use.For the installation of the nozzle you need a special tool.You can get it from your distributor.coverage area: ...........................................see design manualmin. - max. corage heigh: ........................see design manual

without UL / FM approval*

** without VdS approval


11/50

M4-02-03-1_

V1/04.0

9/I00/2010-11-

16/1-1

designation order no. working pressureat 21 C

weightapprox.

B0482-A25 DN33 88 7964 25 barvalve

B0482-A DN33 88 7662 50 bar4.4 (9.7)

technical data:

extinguishing agent ....VK 200 (HFC 227ea), VK 1230 (FK-5-1-12)nominal diameter ................................................DN33 (1 1/2 ")(free cross-sectional area at minimum flow path 697 mm..........................................................................................................(1,080 in2))operating temperature .VdS/CE.........................-20 C up to +50 C (-4 F up to 122 F)UL/FM ..........................-18 C up to +50 C (0 F up to 122 F)max. working pressure at 50 C:- valve B0482-A25 DN33 ................................35 bar (508 psi)- valve B0482-A DN33 .....................................60 bar (870 psi)to be used for steel cylinder .....................from 22.0 l to 50.0 l

material / surface:

housing, adapter, screws ...................................................brassspindles, seal retainer ........................................................brassO-ring / seal of seat ..............................................................NBRbursting disk .......................................................................nickelspring ......................................................................................steeldamping ................................................................... ...........PA 6.6

section: F - F


adapter M12x1,5 - G1/8 VK 200/1230 .......................................contact pressure gauge VK 200/1230 .......................................dip tupe VK200/1230 for valves DN33 .......................................(dip tupes are to be shortened as necessary in acc. to specifieddimension given of the extinguishing agent cylinder)

release devices VK 200/1230:- electrical .......................................................................................- electrical with mech. blocking device .....................................- pneumatic ....................................................................................- pneumatic/manual ......................................................................

- manual ..........................................................................................- tackle pneum./manual ....................... ....................... .................


Valves B0482-A25 and B0482-A DN33, VK 200/1230dimensions in mm (inch); weight in kg (lbs)

(2.54)

(2.82)

(2.9

1)

(3.1

9)

(1.2

0)

(1.3

0)

(1)

(1.3

8)

(7.4

0)

(2.2

0)

(wrench size 2.60)

G307011

1134 - CPD - 1007


12/50

M4-02-03-2/04.0

9/I00/2010-11-16/1-1


Valves B0482-B25 and B0482-B DN33 with integrated electrical

release VK 200/1230 * not ULdimensions in mm (inch); weight in kg (lbs)

designation order no.working pressure

at 21 C

weight

approx.

B0482-B25 DN33 88 7965 25 bar (360 psi)

valve with integratedB0482-B DN33 88 7663 50 bar (725 psi)

4.7 (10.4)

technical data:

extinguishing agent .....VK 200 (HFC 227ea), VK 1230 (FK-5-1-12)nominal diameter ................................................DN33 (1 1/2 ")................ ..(free cross-sectional area at minimum flow path 697 mm

...............................................................................................(1,080 in2))

operating temperatureVdS/CE.........................-20 C up to +50 C (-4 F up to 122 F)FM ................................-18 C up to +50 C (0 F up to 122 F)max. working pressure at 50 C (122 F):- valve B0482-B25 DN33 ....................................35 bar (508 psi)- valve B0482-B DN33 .........................................60 bar (870 psi)to be used for steel cylinder .......................from 22.0 l to 50.0 l

technical data:integrated electrical release:- voltage .................................................................................24 V DC- current intensity .....................................................0.25 A 10 %- output .....................................................................................0.6 W- protection category ................................................................IP 54- duty cycle .............................................................................100 %

section: F - F

material / surface:

housing, adapter, screws ......................................................brassspindles, seal retainer ..........................................................brassO-ring / seal of seat ..................................................................NBRbursting disk .............................................................................nickelspring .........................................................................................steeldamping ...................................................................................PA 6.6


adapter M12x1,5 - G1/8 VK 200/1230 .......................................contact pressure gauge VK 200/1230 .......................................dip tupe VK 200/1230 for valves DN33 ......................................(dip tupes are to be shortened as necessary in acc. to specified

dimension given of the extinguishing agent cylinder)

release devices VK 200/1230:- pneumatic .....................................................................................- pneumatic/manual .................................. ...................................- manual ..........................................................................................- tackle pneum./manual ..................... ....................... ...................

section: D - D

(wrench size 2.60)

(7.2

0)

(2.2

0)

(2.9

1)

(5.2

4)

(3.43)

(2.54)(2.82)

71 (2.80)

(1.3

0)

(1)

(1.3

8)

(3.1

9

)

(2.2

0)

G307011

1134 - CPD - 1007


13/50

M4-02-07-1_

V1/04.0

9/I00/2010-11-

16/1-1


at 21 C

weight

approx.

B0481-A25 DN49 88 7966 25 bar (360 psi)

valve B0481-A DN49 88 7664 50 bar (725 psi)8.9 (19.6)

technical data:

extinguishing agent ....VK 200 (HFC 227ea), VK 1230 (FK-5-1-12)nominal diameter .......................................................DN49 (2 ")(free cross-sectional area at minimum flow path 1515 mm..........................................................................................(2,348 in2)operating temperatureVdS/CE.....................-20 C up to +50 C ( -4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)max. working pressure at 50 C (122 F):- valve B0481-A25 DN49 ................................35 bar (508 psi)- valve B0481-A DN49 .....................................60 bar (870 psi)to be used for steel cylinder ...................from 80.0 l to 180.0 l

material / surface:

housing, adapter, screws ....................................................brassspindles, seal retainer ........................................................brassO-ring / seal of seat ...............................................................NBRbursting disk ........................................................................nickelspring ......................................................................................steeldamping ...............................................................................PA 6.6

section: B - B


adapter M12x1.5 - G1/8 VK 200/1230 .......................................contact pressure gauge VK 200/1230 .......................................dip tupe VK 200/1230 for valves DN49 .....................................(dip tupes are to be shortened as necessary in acc. to specifieddimension given of the extinguishing agent cylinder)

release devices VK 200/1230:- electrical ........................................................................................- electrical with mech. blocking device .....................................- pneumatic .....................................................................................- pneumatic/manual ......................................................................- manual ..........................................................................................


Valves B0481-A25 and B0481-A DN49, VK 200/1230dimensions in mm (inch); weight in kg (lbs)

(wrench size 2.60)

(3.5)

(9.4

1)

(2.8

3)

(1.9

3)

(3.74)

(3.64)

(3.19) (1,1

0) (

1.3

8)

(3.9

2)

(2.5

6)

(3.6

2)

G307011

1134 - CPD - 1007


14/50

M4-02-07-2/04.0

9/I00/2010-11-16/1-1


Valves B0481-B25 and B0481-B DN49 with integrated electrical

release VK 200/1230 * not ULdimensions in mm (inch); weight in kg (lbs)


at 21 C

weight

approx.

B0481-B25 DN49 88 7967 25 bar (360 psi)

valve with integrated B0481-B DN49 88 7665 50 bar (725 psi) 9.3 (20.5)

technical data:

extinguishing agent ....VK 200 (HFC 227ea), VK 1230 (FK-5-1-12)nominal diameter ........................................................DN49 (2")............(free cross-sectional area at minimum flow path 1515 mm.........................................................................................(2,348 in2))operating temperatureVdS/CE........................-20 C up to +50 C (-4 F up to 122 F)FM ............................... -18 C up to +50 C (0 F up to 122 F)max. working pressure at 50 C (122 F):- valve B0481-B25 DN49 .................................35 bar (508 psi)- valve B0481-B DN49 .....................................60 bar (870 psi)to be used for steel cylinder ...................from 80.0 l to 180.0 l

technical data:

integrated electrical release:- voltage ...........................................................................24 V DC- current intensity ...................................................0.25 A 10 %- output ..................................................................................0.6 W- protection category ................................. ...........................IP 54- duty cycle ...........................................................................100 %

section: B - B

material / surface:

housing, adapter, screws ...................................................brassspindles, seal retainer ........................................................brassO-ring / seal of seat .............................................................NBRbursting disk ......................................................................nickelspring ..................................................................................steeldamping ............................................................................PA 6.6


adapter M12x1,5 - G1/8 VK 200/1230 .......................................contact pressure gauge VK 200/1230 .......................................dip tupe VK 200/1230 for valves DN49 .....................................

(dip tupes are to be shortened as necessary in acc. to specifieddimension given of the extinguishing agent cylinder)

release devices VK 200/1230:- pneumatic .....................................................................................- pneumatic/manual ......................................................................- manual ..........................................................................................

section: A - A

(3.5)(3.7)

(9.2

5)

(7.1

8)

(3.74)

(3.64)

(1.9

3)

(1.1

0)(1.3

8)

(3.6

2)

(3.9

2)

(2.5

6)

(wrench size 4.17)

G307011

1134 - CPD - 1007


15/50

M4-03-03-1/02.0

8/I00/2010-11-16/

1-1

designation order no. weight

release device pneumatic VK 200 17197 0.48 (1.1)

technical data:

operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL, FM .........................-18 Cup to +50 C (0 F up to 122 F)

note:

The actuating pressure must be applied for at least 5 seconds.The release device is equipped with two connections for pilotpipes to allow the control gas to be passed on to additionalrelease devices.

application:

Pneumatic actuation of extinguishing agent cylinder valves oftype B0481 and type B0482.One extinguishing agent cylinder valve each can be openendpneumatically.

section: A - A


Release device VK 200/1230 pneumaticdimensions in mm (inch); weight in kg (lbs)

( 1.97)

( 1.77)

(0.52)

(1.9

7)

(1,69)

(wrench size 1.61)

(wrench size 1.81)

(0.1

535)

(0.3

228)


16/50

M4-03-05-1_

V1_

V2/02.0

8/I00/2010

-11-16/1-1


release device manual VK 200 17098 0.41 (0.90)

application:

Manual actuation of extinguishing agent cylinder valves oftype B0481 and type B0482.One extinguishing agent cylinder valve each can be openendmanual.

section: A - A


Release device VK 200/1230 manualdimensions in mm (inch); weight in kg (lbs)

technical data:

manual actuation .....................pound-force < 150 N (33.7 lbf)operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL, FM ........................-18 C up to +50 C (0 F up to 122 F)

note:

the manual actuation must take place for at least 5 seconds

(2

.13)

( 1.97)

(3.03)

(0.1

496)

(0.3

189)


17/50

M4-03-04-1/02.0

8/I00/2010-11-16/

1-1


Release device VK 200/1230 pneumatic/manualdimensions in mm (inch); weight in kg (lbs)


release device pneumatic/manual VK 200 17198 0.57 (1.26)

technical data:

manual actuation ...................................release force < 150 Noperating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM ..........................-18 C up to +50 C (0 F up to 122 F)

note:

The actuating pressure must be applied for at least 5 seconds.The release device is equipped with two connections for pilotpipes to allow the control gas to be passed on to additionalrelease devices.

application:

Pneumatic or manual actuation of extinguishing agentcylinder valves of type B0481 and type B0482.One extinguishing agent cylinder valve each can be openendeither manually or pneumatically.

section:A - A

(0.1

457)

(0.39)

(1.69)

(0.52)

(2.7

6)

(2.6

4)

(1.9

7)

( 1.77)

( 1.97)

(0.3

145)

(wrench size 1.81)

(wrench size 1.61)


18/50

M4-03-01-1_

V1/04.0

9/I00/2010-11-

16/1-1


release device with diode VK 200 88 7667 2.49 (5.5)

release device without diode VK 200 16360 2.49 (5.5)

technical data:

nominal voltage ................................................24 V / DC 15 %nominal current ........................................................0.5 A 10 %IP code ...............................................................................IP65electrical connection .............................................................PG9max. permitted test current .............................................20 mAoperating temperature range............................................................................................-20 C up to +50 C (-4 F up to 122 F)UL ...........................-18 C up to +27.5 C (0 F up to 81.5 F)FM ................................-18 C up to +50 C (0 F up to 122 F)duration of connection .....................................100 % duty ratioactuation force at the contact with the plunger .........>= 500 Nholding force in resting state ...........................100 N to 250 N

note:

the electrical actuation signal must be present for at least5 seconds

application:

Electrical actuation of extinguishing agent cylinder valves oftype B0481 and type B0482.One extinguishing agent cylinder valve each can be openendelectrically by applying of the nominal voltage.

terminal connection

clamp 1: + poleclamp 2: - pole

solenoid


Release device VK 200/1230 electricaldimensions in mm (inch); weight in kg (lbs)

(~5.5

1)

(~0.6

3)

( 2.56)

SW46

65


19/50

M4-03-02-1/04.0

9/I00/2010-11-16/

1-1


release device with diode and mech. 88 7666 2.7 (5.95)

release device without diode 17196 2.7 (5.95)

technical data:

nominal voltage .................................................24 V / DC 15 %nominal current .........................................................0.5 A 10 %IP code ..............................................................................IP65max. permitted test current ..............................................20 mAoperating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)FM ................................-18 C up to +50 C (0 F up to 122 F)duration of connection .....................................100 % duty ratioactuation force at the contact with the plunger .........>= 500 Nholding force in resting state ...........................100 N to 250 Nmicro switches:- voltage ..........................................................................48 V / DC- current, ohmic load ................................................max. 1 A- IP code ..................................................................................IP67- change-over contact .........................................potential-free

note:

the electrical actuation signal must be present for at least5 seconds

application:

Electrical actuation of extinguishing agent cylinder valves oftype B0481 and type B0482.One extinguishing agent cylinder valve each can be openendelectrically by applying of the nominal voltage.

terminal connection

clamp 1: + poleclamp 2: - pole

solenoid


Release device VK 200/1230 electrical with mech. blocking

device * not ULdimensions in mm (inch); weight in kg (lbs)

(4.4

3)

(4.6

2)

(

2.8

3)


20/50

M3-09-10-2/02.0

9/I00/2010-11-16/

1-2


Pneumatic release device PAE - CO2electrical *not FM

dimensions in mm (inch); weight in kg (lbs)

application:

for triggering of cylinder banks, selector valves, pneumaticalarms (4 kg CO2per makrofone VK-1) and pneumaticdoor holding devices

operating temperature:.....................................-20 C up to +50 C (-4 F up to 122 F)UL ................................-18 C up to +50 C (0 F up to 122 F)

included in delivery:

PAE - CO2- 5.4 l / 10.7 l ...........................................see page 2protective cover PAE ........................................................88 5322as well as fastenings

designation order no. h weight

5.4 l 88 5335 900 (35.43) 30 (66)without reserve

10.7 l 88 5341 1310 (51.57) 38 (84)

5.4 l 88 5337 900 (35.43) 47 (104)PAE - CO2- EM complete

with reserve10.7 l 88 5343 1310 (51.57) 63 (139)

without reserve with reserve

PAE - CO2- EM complete (with protective cover)


support weighing device PAE ........................................88 6350reset tool ...........................................................................88 5530monitoring loss at pneumatic release device PAE .......88 8998monitoring for release device EM ................................88 5740

(22.83)(22.83)

(15.75) (15.75)


21/50

M3-09-10-2/02.0

9/I00/2010-11-16/

2-2

technical data:

medium ..................................................................CO2- gaseousoperating pressure .......................................140 bar (2031 psi)test pressure ..................................................210 bar (3046 psi)amount filled .....................4 kg to 8 kg (7.94 lbs to 17.64 lbs)thread connection..for precision steel pipe 6x1 (0,236 to 0,039)

operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL ................................-18 C up to +50 C (0 F up to 122 F)

designation order no. h weight

5.4 l 88 5334 900 (35.43) 26 (57)without reserve

10.7 l 88 5338 1310 (51.57) 34 (75)

5.4 l 88 5336 900 (35.43) 43 (95)PAE- CO2- EM

with reserve10.7 l 88 5342 1310 (51.57) 59 (130)

without reserve with reserve

PAE - CO2- EM (without protective cover)


Pneumatic release device PAE - CO2electrical *not FM


note:

Each PAE has to be installed complete with protective coveronly. Exception: If an additional protecting guard is provided(for example enclosure).

(22.83)

(15.75)

(22.83)

(15.75)


22/50

M3-11-03-1/06.0

3/I00/2010

-11-16/1-1


monitoring loss pneumatic release device PAEdimensions in mm (inch); weight in kg (lbs)

application:

Electrical monitoring of the weighing device WE4.If the permissible margin of loss is exceeded (5% - 10% supplyper control cylinder) the beam weight falls and actuates a reedcontact limit switch. The limit switch sends a fault message tothe monitoring control panel and the fault is indicated locallyvia LED.

operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM............................-18 C up to +50 C (0 F up to 122 F)


reed contact limit switch .............................................88 6343magnet bracket for WA loss PAE ................................87 6875bracket limit switch monitoring loss PAE WE4 ..............88 8986as well as screws, nuts and washers


monitoring loss pneumatic releasedevice PAE

88 8998 0,20 (0,44)


23/50

M3-02-20-1/02.0

9/I00/2010-11-16/

1-2


Release device EM reset tool and bracket for reset tooldimensions in mm (inch); weight in kg (ibs)

technical data:

operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)

solenoid:- magnetic force ................................ ....................................44 N- switching duration ........................................................100 %- voltage ....................................................24 V DC / 230 V AC- current ....................................................... .........1.04 A / 0.12 A- stroke ................................. .................................. .9 mm (0.35 ")- IP code ............................................................................IP 54

(by accordingly covering of the pull and pressure rod side)

application:The release device EM may be used only in accordancewith system approval in stationary CO

2,Argon and nitrogen

fire extinguishing systems (max. 235 bar operating pres-sure). It is used for electrical release of cylinder valves.


release device EM 24 V DC 88 5738 1.8 (3.97)


reset tool for release device EM .................................see belowbracket for reset tool release device EM ....................see belowmonitoring for release device EM ................................88 5740

(~7.48)

( ~

4

. 7 2 )

(0.118 0.039)


24/50

M3-02-20-1/02.0

9/I00/2010-11-16/

2-2


reset tool release device EM 88 5530 0.31 (0.68)

bracket reset tool release device 88 6367 0.32 (0.71)

bracket for reset tool release device EM ..........steel, galvanized

reset tool for release device EM bracket for reset tool release device EM


Release device EM reset tool and bracket for reset tooldimensions in mm (inch); weight in kg (lbs)

( 1.42)

( 1.9)

( 0.39)

(2.76)

(3.9

4)

(3.3

5)

(2.4

4)

(3.

74-5.5

1)


25/50


26/50

M3-04-00-1/01.0

9/I00/2010-11-16/

1-1


selector valve DN25 - 50 compl.pneum., VK 200/1230dimensions in mm (inch); weight in kg (lbs)

note:

to closure of a manifold branch are needed followingcomponents:

- blind cap DN50 ................................................87 3746 (stock)- O-ring 54 x 3 NBR 70 Shore ............................84 7059 (stock)- cap nut DN50 ...................................................87 0630 (stock)

Pos. designation order no. weight

1 selector valve see selector valve DN 25-50

2 manifold HP see manifold HP-DN50

3 limit switch see limit switch US 432y/434y

4 VK 200/ 1230 safety valve 88 8007 -

5 plug 77 4822 0.05 (0.11)

-pipe support B DN50 complete (M1-16-00)

77 4639 0.77 (1.7)

- manual release lever, 497 mm long 86 0346 1.2 (2.6)

- installation instruction 86 0863 -

Odering advice:

The manifold sets with pneumatic release can be put togetherindividually. The components can be ordered from stock usingthe order no.



27/50

M3-04-00-2/01.0

9/I00/2010-11-16/

1-1


selector valve DN25 - 50 VK 200/1230dimensions in mm (inch); weight in kg (lbs)

technical data:

type ......................................................................................VK-BVagent ......................................................HFC-227ea / FK-5-1-12operating temperature rangeVdS/CE........................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)working pressure / test pressure:- pneumatic release device ....................................................................20 up to 140 bar / 210 bar (290 up to 2031/ 3046 psi)flow characteristics (selector valve):- DN25 ....................................equivalent length 0.18 m (7.09")- DN40 .................................equivalent length 0.27 m (10.63")- DN50 .................................equivalent length 0.37 m (14.57")


limit switch ...........................................................US 432y / 434y

designation DN(inches)

order no. RDIN2999

L weight

25 (1) 88 5189 R1 17.0 (37.5)

40 (1 ) 88 5191 R1.1/2790 (31.10)

20.5 (45.2)selector valve VK-BV

50 (2) 88 5192 R2 805 (31.92) 24.8 (54.7)

G393001

0786 - CPD - 3004


28/50

M8-3-02-20-1/02.0

9/I00/2010-11-16/1-1

Product information:

Selector valve DN25 - 50 compl. pneum., VK 200/1230

Installation of limit switch bracket move lever item 3.5 up to its end position

align bracket item 3.16 so that plunger item 16.7 lies loosely on excenter of lever item 3.5 (see detail "X")

functional test

Components1 manifold DN502 termination (order no. 88 6118)3 selector valve VK-BV 25,40,50

3.5 lever VK-BV3.8 O-ring3.16 limit switch bracket3.17 pipe clip3.18 hex. screw M10x803.19 washer A10.53.20 hex. nut M103.24 washer DIN6798 A10.5

4 threaded plug5 safety valve

Installation instructions: manifold with selector valve HP DN25 - 50 pneumatic actuation


29/50

M3-04-01-3/01.0

9/I00/2011-01-31/

1-1


Selector valves DN65 - 100 compl., pneumatic, CO2/ VK 200/1230dimensions in mm (inch); weight in kg (lbs)

ordering hints:

Manifolds DN65 - 100 pneumatic are manufactured individuallyfor each contract. Use form C10.40.80 (see documentationspecial extinguishing systems) for ordering.Primer coated or powder coated manifolds are to be orderedvia order number 40 0015. Galvanized manifolds are to beordered via order number 40 0016.

Listed system covered by UL-file EX6388 (CO2)1) the longer dimensions are valid for manifolds with min.

one selector valve DN1002) selector valves are delivered only in combination with complete manifolds

main components:

ball valves DN65 - DN100 ...........................................................release cylinder section valve .....................................................safety valve VK 200/1230 .............................................88 8007limit switch type US 432y and US 434y .....................................manifold rack - left ..........................................................81 7728

view: A - A

manifold rack - right ........................................................82 2583

technical data:

type ......................................................................................VK-BVagent ......................................................HFC-227ea / FK-5-1-12working pressure / test pressure:- pneumatic release device ............20 up to 140 bar / 210 bar.......................................................290 up to 2031 psi / 3046 psiflow characteristics (high pressure selector valve):- DN65 ................................equivalent length 0.43 m (16.93 ")- DN80 ................................equivalent length 0.55 m (21.65 ")- DN100 .............................equivalent length 0.67 m (26.38 ")operating temperature rangeVdS/CE........................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)...........................................................material and pressure testactuation .....................................................by pilot cylinder PAE


manual release lever, 600 mm long ...............................82 3976

designation DN (inch) L h

65(2 1/2)

203 / 270(7.99 / 10.63)

80(3)

350(13.78) 200 / 267

(7.87 / 10.51)manifold pneumatic

100(4)

450(17.72)

/ 250(--- / 9.84)

1)

(7.87) (7.87) (7.87)(13.78)

(5.91)

(5.12)

(5.91) (13.3

9)

(10.2

4/12.9

9)

(26.7

7)

(38.7

8)

(4") (2 1/2" / 3")

(~19.69)

G397004 0786 - CPD - 30005

2)


30/50


31/50

M3-04-00-3/01.0

9/I00/2010-11-16/

1-1


Manifold HP - DN50 VK 200/1230dimensions in mm (inch); weight in kg (lbs)

technical data:

agent .....................................................HFC-227ea / FK-5-1-12operating temperature range

.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)finish pipe .............................coating DIN EN 10240 - t Zn o

tee piece ......................coating EN 12329 - Fe / Zn12

* deviation from nominal size because ofthread tolerances

feature order no. branchesLges.

approx.

L1(n x 250)

approx.

weight

DN50 - 2 88 5346 2 515 (20.28) 250 (9.84) 13 (29)

DN50 - 3 88 5347 3 765 (30.12) 500 (19.69) 19,5 (43)

DN50 - 4 88 5348 4 1015 (39.96) 750 (29.53) 26 (57)

DN50 - 5 88 5349 5 1265 (49.8) 1000 (39.37) 32,5 (72)DN50 - 6 88 5350 6 1515 (59.65) 1250 (49.21) 39 (86)

DN50 - 7 88 5351 7 1765 (69.49) 1500 (59.06) 45,5 (100)

DN50 - 8 88 5353 8 2015 (79.33) 1750 (68.9) 52 (115)

DN50 - 9 88 5354 9 2265 (89.17) 2000 (78.74) 58,5 (129)

DN50 - 10 88 5355 10 2515 (99.02) 2250 (88.58) 65 (143)

* *

(~9.84)

(n x 9.84)


32/50

M3-04-01-6/02.0

9/I00/2010-11-16/1-1

technical data:

medium ...................................................................................CO2operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)

Ansicht / view: B

section: A-A


Pilot control manifold CO2- DN15


sheets also applying:

safety valve G1/2 ..... ................................ .......................88 6282release device EM 24 V DC ...........................................88 5738


adapter for connecting CO2- Ermeto DN4 ...............82 7325DN8 ...............85 5425

(~9.06)

(~10.2

4)

(~11.0

2)

(~4.72) (~5.91) (~5.12) (~5.91) (~5.91)

branches order no. L weight

approx. approx.

2 83 0778 340 (13.38) 9.7 (21)3 83 0791 490 (19.29) 14.2 (31)

4 83 0808 620 (24.41) 17.7 (39)

5 83 0833 770 (30.31) 22.2 (49)

6 83 0857 920 (36.21) 26.8 (59)

7 83 0870 1050 (41.34) 30.2 (67)

8 83 0894 1200 (47.24) 34.7 (76)

9 83 0912 1350 (53.15) 39.3 (87)

10 83 0936 1480 (58.26) 42.7 (94)

11 83 0950 1630 (64.16) 47.3 (104)

12 83 0973 1780 (70.08) 51.8 (114)

13 83 0985 1910 (75.20) 55.2 (122)

14 83 0997 2060 (81.10) 59.8 (132)

15 83 4115 2210 (87.01) 64.3 (142)

(~6.6

9)


33/50

M4-04-09-1/02.0

8/I00/2010-11-16/

1-1

application:

manifold selector valve for VK 200/1230 systems


safety valve G1/2 - 66 bar 88 8007 1.2 (2.65)


Safety valve G1/2 - 66 bardimensions in mm (inch); weight in kg (lbs)

technical data:

type ..........................................................................4373.2602medium ................................HFC-227ea, FK-5-1-12, nitrogenresponse pressure ...............................max. 66 bar at +50 C........................................................................(-957 psi at 122 F)operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)thread ...............................................................in acc. to ISO 228test certificate ...................EN 10204 - 3.1 (response pressure)position of device ................. ........ ................ ................. .vertical

safety valve according to pressure equipment directive97/23/EC category IV

(1.18)

(0.39)(0.5

9)

(5.3

9)

(1.3

0)

(wrench size 1.42)


34/50

M3-02-14-1/02.0

9/I00/2010-11-16/

1-1


Safety valve G1/2 - 140 bardimensions in mm (inch); weight in kg (lbs)

technical data:

type ...............................................................................4373.2612medium ..................................................................CO2- gaseousresponse pressure .....140 bar at +50 C (-2031 psi at 122 F)operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)flow rate .....................................approx. 3014 Nm/h, gaseousthread ................................................................in acc. to ISO 228test certificate .......................EN 10204 - 3.1 (response pressure)

position of device ...............................................................vertical

safety valve according to pressure equipment directive97/23/EC category IV

designation order no. weight safety valve G1/2 - 140 bar 88 6282 1.2 (2.65)

(1.18)

(wrench size 1.42)

(0.5

9)

(5.3

9)

(1,3

0)

(0.39)


35/50

M4-04-05-1/05.0

8/I00/2010-11-1

6/1-1

technical data:

type .................................................................................VK-CRmedium .................................HFC 227ea, FK-5-1-12, nitrogennominal diameter ...............................................................DN50connection thread inlet ...................................Rp 2 EN 10226

outlet ......................................Rc 2 ISO 7operating pressure ............................................60 bar (870 psi)opening pressure .........................................3 bar ( 43.5 psi)

temperature rangeVdS/CE.....................-20 C up to +50 C (-4 F up to 122 F)UL, FM ......................-18 C up to +50 C (0 F up to 122 F)


check valve DN50 VK-CR 17153 5.15 (11.35)

material / surface:

housing ............................................................steel, galvanizedinternal components ............................................stainless steelspring ...................................................................stainless steelseal ......................................................................................NBR

application:

The check valve VK-CR allows the extinguishing agent to flow

in the flow direction and prevents its flow in the oppositedirection. It is fitted between the valve of the fire extinguishingagent cylinder and the manifold.


Check valve type VK-CR - VK 200/1230dimensions in mm (inch); weight in kg (lbs)

(~6.69)


36/50

M3-06-03-1/02.0

9/I00/2010-11-16/

1-1


Shuttle non-return valves VK-WRV DN4 and DN8dimensions in mm (inch); weight in kg (lbs)

technical data:

agent ......................................................................CO2- gaseousoperating pressure ..........2 up to 140 bar (29 up to 2031 psi)test pressure ..................................................210 bar (3046 psi)rate of pressure rise ............................min. 3 bar/s (43.5 psi/s)position of device ................................feedings only horizontaloperating temperature rangeVdS/CE.......................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)

material / surface:

housing ..........................................................................aluminiumgasket .....................................................................................NBR

ball ...........................................................................stainless steel

DNorder no. for pipe weight

4 88 6247 6 x 1 (0.236 x 0.039) 0.25 (0.55)

8 88 6248 10 x 1 (0.393 x 0.039) 0.24 (0.53)

(4.13")

(2.3

6")

G303002

0786 - CPD - 30008


37/50

M4-04-01-1/02.0

8/I00/2010-11-1

6/1-1


Hose DN4 - VK 200/1230dimensions in mm (inch); weight in kg (lbs)

desi gnati on order no . L weig ht

DN4 x 600 16376 600 (23.62) 0.2 (0.44)

DN4 x 1000 16377 1000 (39.37) 0.3 (0.66)hose - VK 200/1230

DN4 x 1500 16378 1500 (59.06) 0.4 (0.88)

technical data:

type ................................DN 4 x 600/1000/1500 - MX 200/1230operating medium ..........HFC-227ea, FK-5-1-12, nitrogen, CO

2

nominal diameter ..............................................DN4 (0.157 ")minimum bending radius ................................90 mm (3.54 ")temperature rangeVdS/CE...................-40 C up to +60 C (-40 F up to 140 F)UL, FM ......................-18 C up to +50 C (0 F up to 122 F)operating pressure ....................................160 bar (2321 psi)test pressure .............................................240 bar (3481 psi)burst pressure ...........................................480 bar (6962 psi)ferrule .....................PN 04 AOL conical nipple 24 with O-ring................metric (DKOL) steel galvanized yellow chrome dulled

test certificate .............................EN 10204 - 3.1 (pressure test)

application:

to connect:- the master extinguishing agent cylinder and the

pneum. release devices of other extinguishing agent cylinder

- two pneumatical release devices

- the pneumatical release device and the pilot pipe of multi zonesystems

(L +0.2)


38/50

M4-04-03-1_

V1/02.0

8/I00/2010-11-

16/1-1

desi gnation order no. L SW1 SW2 weigh t

DN40 16379 825 (32.48) 3.1

DN40 90 16380 450 (17.72)60 (2.36)

50(1.97) 3.1

DN50 16381 1000 (39.37) 5.5hose - VK 200/1230

DN50 90 16382 520 (20.47)

70/75(2.76/2.95)

65(2.56) 6.0

technical data:

type DN 40 / DN50 .....................DN 40 / DN50 VK 200/1230DN 40 90 / DN50 90 ...DN 40 / DN50 VK 200/1230 90

operating medium ..................HFC-227ea, FK-5-1-12, nitrogennominal diameter ...........................DN40 / DN50 (1 1/2 " / 2 ")minimum bending radius ............................................................

DN40 / DN50 .....................500 mm / 630 mm (19.69 / 24.80)thread G1 / G2 DN40 ..1.7/8"-12 UNF [B1.1] / R 1.1/2" [ISO 7]DN50 .......2.1/2"-12 UNF [B1.1] / R 2." [ISO 7]

temperature rangeVdS/CE.....................-40 C up to +60 C (-40 F up to 140 F)UL, FM ........................-18 C up to +50 C (0 F up to 122 F)operating pressure ........................................80 bar (1160 psi)test pressure .................................................120 bar (1740 psi)burst pressure ..............................................240 bar (3481 psi)test certificate ............................EN 10204 - 3.1 (pressure test)

DN40 / DN50

DN40 90 / DN50 90

application:

to connect the valve of the extinguishing agent cylinder to thenozzle pipe, the manifold, or the check valve

*

* at the manufactures option


Hose DN40 and DN50 VK 200/1230dimensions in mm (inch); weight in kg (lbs)

( 1 1/2" / 2 ")

( 1 1/2" / 2 ")


39/50

M4-04-06-1-MX200/01.1

0/I00/2011-09-06/1-1


Contact pressure gauge VK 200dimensions in mm (inch); weight in kg (lbs)

electrical data:

switching voltage .......................................4.5 24 V DC / VACswitching current ......................................................5 100 mAcontact load ..............................................max. 3 W, dry contactconducting wire ............................two-core, 100 cm (39.37 ")cross-section of conducting wire .............0.5 mm (0.0196 ")

design of instrument dial:

material ............................................................aluminium, whiteindicating range ...........................................0 to pressure rangeindicating range marked:I......................pressure at minimum temperature 0 F (18 C)II to III.....pressure from 90 % to 110 % from charging pressureIV.........................pressure at max. temperature 122 F (50 C)front plate colour marking:

0 to I .............................................................................rechargeI to II ......................................................................................redII to III ................................................................................greenIII to IV ...................................................................................redIV to max. .................................................................overcharge

max. pressure

psi (bar)

order no. switching point

NC / NO

operating pressureat

70 F (21 C)

weight

725 (50) 88 9306 324 (22.5) NO 360 (25) 0.17 (0.37)

1015 (70) 88 9307 549 (37.8) NO 610 (42)* 0.17 (0.37)

1160 (80) 88 9309 653 (45) NO 725 (50) 0.17 (0.37)

725 (50) 88 9311 324 (22.5) NC 360 (25) 0.17 (0.37)

1015 (70) 88 9312 549 (37.8) NC 610 (42)* 0.17 (0.37)

1160 (80) 88 9313 653 (45) NC 725 (50) 0.17 (0.37)

1)

1)

spare parts: O-ring .....................................................88 8023supporting ring O-ring ............................88 8024

note switching mode:

break contact (NC) / make contact (NO):Break contact or make contact by actuation of the indicatorcounter clockwise at the switch pressure (decrease ofpressure).

technical data:

pressure medium ............................................N2, HFC-227ea

nominal size ............................................................................50accuracy class .......................................................................1.6temperature ranges:..................................measuring medium max. +60 C (140 F)IP code ................................................IP65 with mounted cablemeasuring network, motion work ............................copper alloy

(0.79)

(0.98)

(0.07)

not UL / FM*

SW 14

supporting o-ring

0-ring

20

25

2

FK 5-1-12

III III

IV

HFC-227ea


40/50


41/50

M4-04-02-1/03.0

9/I00/2010-11-16/

1-1

application:

to the connection of the hose DN4 / pilot pipe with:- valves type B0481, valves type B0482- valves type B0480, BAS- release device VK 200/1230 pneumatic/manual- release device VK 200/1230 pneumaticoperating temperature range



adapter M12x1,5 - G1/8 VK 200 88 7644 0.018 (0.04)


adapter M12x1,5 - G1/8 VK 200/1230dimensions in mm (inch); weight in kg (lbs)

(1.08)

(wrenchsize0.5

5")


42/50

M3-10-04-1/02.0

9/I00/2010-11-16/1-1


Makrofon VK-1dimensions in mm (inch); weight in kg (lbs)

technical data:

operating medium ................................................CO2,gaseousoperating temperature rangeVdS/CE.....................-20 C up to +300 C (-4 F up to 572 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)consumption ......................approx. 75 g/min. (0.165 lbs/min.)............................................................. (at ambient temperature)sound pressure at 8 bar ....................................110 dB (A) 1 mminimum start pressure .....................................8 bar (116 psi)supply pressure, min. ............................................4 bar (58 psi)supply pressure, max. .................................140 bar (2031 psi)frequency ........................................................................600 Hzconnection .....................................................................................................for precision drawn steel pipe 6 x 1 (0.236 x 0.039 ")


makrofon complete with bracket for fastening .........................


clamping bolt for wall mountingsilencer makrofon VK-1 ................................................87 7120


Makrofon VK-1 86 0050 1.15 (2.54)

(~4.7

2)

(~ 12.40)

(

4.4

9)

G310017


43/50


44/50

M3-09-00-4/02.0

9/I00/2010-11-16/

1-1

technical data:

agent ...........................................................................CO2, Ar, N2nominal diameter ..................................................DN6 (0.236 ")operating pressure ......................................140 bar (2031 psi)operating temperature rangeVdS/CE......................-30 C up to +80 C (-22 F up to 176 F)

UL/FM .........................-18 C up to +50 C (0 F up to 122 F).......................................................................................1.4301connection..............................................cone for 6 mm (0.236 ") steel pipe


disable device VK 87 8070 0.8 (1.76)

A = output

B = venting

P = input

P&ID symbol


Disable device VKdimensions in mm (inch); weight in kg (lbs)


disable device style VK DN6 .........................................88 5375padlock 635/40 .................................................................13 1777retainer shuttle valve ........................................................87 3497as well as fastening material

not included in delivery:the following must be ordered separately for monitoring ofeach ball valve position:limit switch type ZS 256-11Z ..............................................82 84822 x cheese-head screw DIN84-M4x25-brass ............10 67452 x washer DIN125-B 4,3 brass .......................................10 9734

(3.62)

(4.21)

(1.1

8)

G301010

0786 - CPD - 30009


45/50

M3-09-10-3/03.0

2/I00/2010-11-16/

1-1


Support weighing device PAEdimensions in mm (inch); weight in kg (lbs)

material .....................................spring wire, EN 10270-1-2,5 Z

application:

- ease of assembling / disassembling of the pilot cylinder (PAE)resp. extinguishing agent cylinder (one-cylinder system)

- prevention of loss indication during cylinder assembling /cylinder disassembling


support weighing device PAE 88 6350 0.02 (0.04)

(6.3

)

(3.82)


46/50

M4-04-04-1_

V1_

V2/02.0

8/I00/2010-

11-16/1-1

application:

rigid connection between the valve of the extinguishing agentcylinder and the downstream piping

designation order no. G1 G2 weight

DN40 17102 R 1.1/2 1.7/8-12 UN 1.0 (2.2)connection piece VK 200/1230

DN50 17101 R 2 2.1/2-12 UN 1.3 (2.87)


Connection piece DN40 and DN50 VK 200/1230dimensions in mm (inch); weight in kg (lbs)

technical data:

external thread ...........................................tapered, thread sealinternal thread ..........................UN-nut thread, 74 conical holematerial ...............................................steel, galvanized coated


47/50

M3-04-01-7/02.0

2/I00/2010-11-16/

1-1

material / surface:

knurled screw .................................................brass, nickel platednon-return valve .................................................steel, galvanized

application:

venting of release pipes


push-button selector valve 82 2674 0.16 (0.35)


Push-button selector valvedimensions in mm (inch); weight in kg (lbs)

technical data:

agent ......................................................................CO2- gaseousoperating pressure .....................................140 bar ( 2031 psi)operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)thread connection ..........for precision-drawn steel pipe 10 x 1................................................................................(0.393 x 0.039)position of device ..........................................................as desired

(2.9

5)

(wrench size 0.75)

(wrench size 0.95)


48/50

M3-06-09-1_

V1_

V2/02.0

7/I00/2010

-11-16/1-1


Limit switch pneum. operateddimensions in mm (inch); weight in kg (lbs)

Operating temperature range.....................................-20 C up to +50 C (-4 F up to 122 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)


cylinder 25 x H30 .........................................................22 7303limit switch type US 432y ..............................................72 4420support limit switch pneum. activated ............................82 7866union GE 6-PSR-ED A3C .............................................12 5578

2x cheese-head screw DIN84-M5x25-Ms .....................10 69152x hex. nut DIN934-M5-Ms ............................................10 84442x washer DIN125-B-5.3-Ms .........................................10 9771as well as fastening material


limit switch pneum. operated 17103 1.5 (3.31)

~100

~290

pressureconnectionfor pipe 6 mm (0.236)

(~1

1.4

2)

G 1/4

( ~ 3.94)


49/50

M3-04-07-3/05.0

2/I00/2010-11-16/

1-1

technical data:

type ...........................................................ZS 256-11z-M20-2219housing ....thermopl. glass fiber concentrated, self-quenchingIP rating ...................................................................................IP67contact material .....................................................................silvercontacts .......................................................................1 NC, 1 NO

.............................................galvanically isolated contact bridgesoperating temperature range.....................................-30 C up to +80 C (-22 F up to 176 F)UL/FM .........................-18 C up to +50 C (0 F up to 122 F)switch system ...................................................spring control with...........................................twofold brake contacts, forced opener


limit switch ZS 256-11Z-M20-2219 82 8482 0.065 (0.14)

circuit diagram:

t

nominal isolation voltage ..................................................500 Vpermanent current .................................................................10 Anominal operation current / voltage ....................4 A (230 V AC);....................................................2.5 A (400 V AC); 1 A (500 V AC)short-circuit protection ..............10 A slow blow, 16 A quick blow

actuation force ................................................................min. 9 Nmechn. durability .....................................20x106switching cyclesoperation speed ...............................max. 1 m/s, min. 0.01 m/stime on in percent...................................................max. 5000 / h


Limit switch type ZS 256dimensions in mm (inch); weight in kg (lbs)

(2.28) (1.22)

(1.9

9)


50/50

7-2_

V1/05.0

2/I00/2010-11-

16/1-1


Limit switch type US 432y and US 434ydimensions in mm (inch); weight in kg (lbs)

technical data:

housing ........alloy die-cast metal, chrome dulled and varnishedIP rating ...................................................................................IP65contact material .....................................................................silverswitch system ...............................................................slow action.............................................................with twofold brake contactsoperating temperature range.....................................-20 C up to +60 C (-4 F up to 140 F)UL/FM ..........................-18 C up to +50 C (0 F up to 122 F)nominal isolation voltage ..................................................500 Vpermanent current ...............................................................16 Anominal operation current ....................................6 A, 400 V AC

type US 432y

type contacts1)

order no. actuation force2)

approx.

weight

US 432y-M20-2352 2 72 4420 max. 7 N 0.31 (0.68)

US 434y-M20-2352 4 22 4831 max. 100 N 0.42 (0.93)

type US 434y

1) optional adjustable2) effeciency of the switch way

technical data:

short-circuit protection ............ ...16 A slow blow, 20 A quick blowoperation speed .............................max. 1 m/s, min. 0.001 m/stime on in percent.................................................max. 3000 / hmechn. durability .....................................10x106switching cyclescontact spud durability ..............................2x106switching cycles......................................................at 6 A / 400 V AC, cos= 0.4

application:

limit switch pneum. operated, manifold set, selector valve

note: actuate limit switch axially

type US 434ytype US 432y

wiring diagram:

(2.44) (1.97)

(2.44) (1.97)

(5.0

0)

(3.1

5)

A or B

VK200 - Complete Datasheets.pdf

Documents

Transcript of VK200 - Complete Datasheets.pdf