FOR COATING APPLICATIONS · 1 [email protected] VERSION 02-2014 The Netherlands Synthesebaan 1,...

1

[email protected]

VERSION 02-2014

The Netherlands Synthesebaan 1, 4612 RB, Bergen op Zoom Tel: +31 164 276 406 Fax: +31 164 276 446

France 833, Rue du Fort, 59680 Ferriere La Grande Tel: +33 685 437 672 Fax: +33 327 651 789 Germany Salegaster Chaussee 1, Ortsteil Greppin, 06803 Bitterfeld-Wolfen Tel: +49 3493 35 8123 Fax: +49 3493 35 8111

Italy Via del Polaresco 38A, 24129 Bergamo Tel: +39 348 130 0948 Fax: +31 164 276 446

Poland Oddział w Polsce ul. Sienkiewicza 82/84, 90-318 Łódz Tel: +48 603 836 955 Fax: +48 42 655 0335

Spain Autovia de Castelldefels Km. 4.65, 08820 El Prat de Llobregat, Barcelona Tel: +34 93 370 2957 Fax: +34 93 378 9810

United Kingdom North Woolwich Road Silvertown, London E16 2AF Tel: +44 20 7473 7000 Fax: +44 20 7473 7014

U.S.A. - Kentucky 4730 Crittenden Drive Louisville, Kentucky 40209 Tel: +1 502 367 6111 Fax: +1 502 375 5477

- Illinois 2904 Missouri Avenue E. St. Louis, Illinois 62205 Tel: +1 502 367 6111 Fax: +1 502 375 5477

Brazil Avenida General Furtado do Nascimento, 740 cj 76/77 Alto de Pinheiros São Paulo Tel: +55 11 3021 5514 Fax: +55 11 3021 6208

Singapore 229 Mountbatten Road #02-31 Mountbatten Square, 398007 Tel: +65 6634 6063 Fax: +65 6532 0198

China - Suzhou 127 TaiShan Road Suzhou New District 215129 Tel: +86 512 6665 5355 Fax: +86 512 6665 9022

- Foshan Longsheng Nan Road Industrial Zone, Leliu Town Shunde District, Foshan City 528322 Tel: +86 757 2552 6358 Fax: +86 757 2552 6368

India 12 Peninsula Centre, S.S. Rao Road Parel, Mumbai – 400 012 Tel: +91 22 4064 9494 Fax: +91 22 6660 7887

Indonesia Menara Bidakara 2 - 10th Floor #4 Jl. Jend. Gatot Subroto Kav 71-73 Jakarta Selatan – 12870 Tel: +62 21 2906 9454 Fax: +62 21 2906 9458

Indonesia JL. Rungkut Industri II. No. 47 Surabaya Tel: +62 31 842 0391 Fax: +62 31 847 7426

Malaysia Lot 7 Tangga Batu Industrial Estate 9 ½ Miles, Tel: +60 6 3516 888 Fax: +60 6 3517 878 76400 Tanjung Keling, Melaka +60 6 3517 888

Taiwan 2F., No. 10-1, Lane 68, Sunmin Rd., Taipei City 10582 Tel: +88 6 2 2528 5350 Fax: +88 6 2 2528 6062

Thailand 2922/309, 29th Floor, Charn Issara Tower II New Petchburi Road Tel: +66 2 718 1670 1 Fax: +66 2 319 7287 Huay Kwang Bangkapi, Bangkok 10320 +66 2 308 2088 +66 2 308 2967

Vietnam No.1, 9A Street Bien Hoa Industrial Zone 2 Dong Nai Tel: +84 61 383 6503 Fax: +84 61 383 6633

Australia 49-61 Stephen Road Botany NSW 2019, Sydney (Locked Bag 6, Botany NSW 2019) Tel: +61 2 9666 0331 Fax: +61 2 9666 3368

New Zealand 12, Industry Road Penrose Auckland (P.O. Box 12-841) Tel: +64 9 579 2029 Fax: +64 9 571 0542

Regional head offi ce

Production site

Sales offi ce only

RESINS FOR COATING

APPLICATIONS

RESINS FOR

COATING APPLICATIONS We develop and manufacture

innovative water borne and solvent borne resins and additives, as well as solid powder resins. Our products are used in architectural, industrial, automotive and protective coatings. We also supply resins that are used in adhesives, inks and textiles.

In this brochure, we provide an “at-a-glance” overview of the various resin products we supply, together with their key properties, technical features and overall performance (parameters). We invite you to use this brochure as a first guide to identify products for your applications.

For a definite choice however, please contact our technical staff to discuss your requirements in more detail. Although our list of core products covers a broad range of applications, we recognize the value of individual solutions and enjoy the challenge to meet your specific needs. So if you are looking for advice or customized solution, please contact your local sales area manager.

As a leading, global and independent supplier of resins to the coatings industry, Nuplex offers an extensive portfolio of coating solutions for a broad range of end user markets.

5

The products described in this brochure have been arranged in the following groups of coating resins:

Resin type Tradename Resin sub type Page

Acrylic resin Setalux Acrylic polyol, low solids 13

Acrylic polyol, medium solids 15

Acrylic polyol, high solids 17

Thermoplastic acrylic 17

Thermosetting acrylic 17

Acrylic, two-component NCO free 19

Non-aqueous acrylic dispersion 19

Thermosetting acrylic, water thinnable 19

Additive resin Tungophen Phenolic resin 9

Alkyd resin Setal Long oil alkyd 7

Long oil alkyd, urethane modified 7

Medium oil alkyd 7

Medium oil alkyd, silicone modified 7

Short oil alkyd 9

Setyrene Short oil alkyd, acrylic modified 9

Amino resin Setamine Partly butylated melamine resin 31

Bisoxazolidine resin Seta Urethane bisoxazolidine 31

Hydrophobic polyol resin Setathane Polyether-ester polyol 31

Polyester resin Setal Polyester polyol 11

Polyester, water thinnable 11

Saturated polyester 11

Powder resin Setapoll βHAA curing powder resin 35

Epoxy curing powder resin 37

Resin type Tradename Resin sub type Page

Rheology control resin Setal Long oil alkyd, thixotropic modified 23

Polyester polyol, SCA modified 23

Saturated polyester, SCA modified 23

Short oil alkyd, SCA modified 23

Setalux Acrylic polyol, SCA modified 21

Thermosetting acrylic, SCA modified 21

Setaqua Pseudo plastic acrylic dispersion 23

Unsaturated polyester resin Roskydal Amine-accelerated unaturated polyester resin 33

Standard unsaturated polyester resin 33

Water borne acrylic dispersion Setaqua Self-crosslinking thermoplastic dispersion 25

Thermoplastic dispersion 25

Self-crosslinking thermoplastic dispersion, surfactant free 27

Special acrylic dispersion 27

UV-assisted self-crosslinking acrylic dispersion 27

Water borne polyol resin Setaqua Acrylic polyol dispersion 25

Acrylic polyol emulsion 25

Polyester polyol, water thinnable 25

Water borne resin, other Setaqua Amine-functional acrylic emulsion 29

Co-polymer dispersion 29

Epoxy-functional acrylic dispersion 29

Fatty acid modified urethane-acrylic dispersion 29

CONTENTS

7

ALKYD RESINS

SETAL

Resin name NV 1)

(%)Solvents Oil type Viscosity 1)

(23°C, Pa.s)Colour(max. value)

OH - %(on solids)

HEW 2)

(as supplied)Acid value 1)

(mg KOH/g)Density(kg/dm3)

Technical features

LONG OIL ALKYDSetal 293 99 - Unsaturated fatty acids 1.0 8 Gardner n.a. n.a. 9.5 0.99 Very good brushability, levelling, filling, high gloss, low yellowing tendency and

good through hardening. Suitable as reactive diluent.

Setal 304 99 - Unsaturated fatty acids 3.2 8 Gardner n.a. n.a. 7.5 1.00 Good drying, good durability and good pigment dispersing properties.

Setal 303 SM-90 90 Solvent D40 Unsaturated fatty acids 4.0 8 Gardner n.a. n.a. 6.3 0.98 Very good drying, also at low temperatures. Good dispersing and good durability properties.

Setal 305 SM-90 90 Solvent D40 Unsaturated fatty acids 2.5 8 Gardner n.a. n.a. 6.3 0.99 Very good drying, good dispersing and good durability properties.

Setal 900 SM-90 90 Solvent D40 Unsaturated fatty acids 3.5 8 Gardner n.a. n.a. 6.3 0.99 Very good drying, good dispersing and good durability properties. This binder has an increased amount of renewable material.

Setal 301 SM-83 * 83 Solvent D40 Unsaturated fatty acids 4.8 9 Gardner n.a. n.a. max. 7.6 0.98 Excellent durability and drying. Minimal yellowing.

Setal 261 SM-70 70 Solvent D40 Soya bean oil 2.5 7 Gardner n.a. n.a. max. 7.0 0.95 Good long term flexibility.

Setal A F 681 TBA * 70 Solvent D40 Vegetable fatty acids 2.8 6 Iodine n.a. n.a. max. 12.0 0.95 Excellent through-drying and good yellowing resistance.

Setal 270 SM-70 * 70 Solvent D40 Soya bean oil 5.5 6 Gardner n.a. n.a. 6.7 0.96 Good colour fastness, brushability, body and flow, good durability.

Setal 1257 SM-69 69 Solvent D40 Soya bean fatty acids 4.8 6 Gardner n.a. n.a. 4.4 0.90 Very good durability and drying, very little yellowing.

Setal 62 EHV SM-67 67 Solvent D40 Soya bean oil 5.8 6 Gardner n.a. n.a. 5.1 0.95 Fast drying, excellent hardness, very good water resistance and durability.

Setal 221 HD-65 65 Solvent D60 Soya bean oil 3.4 8 Gardner n.a. n.a. 8.5 0.94 Very good exterior durability.

Setal 1177 SM-62 62 Solvent D40 Linseed oil 1.1 10 Gardner n.a. n.a. max. 6.0 0.92 Very good pigment wetting and wetting of substrates. Good penetration in wooden substrates. Solvent is aromatics free, but some rests xylene are present.

LONG OIL ALKYD, URETHANE MODIFIEDSetal 321 SM-75 75 Solvent D40 Mixed vegetable oils 6.0 8 Gardner n.a. n.a. max. 2.8 0.95 Additive resin to improve solids, abrasion and chemical resistance.

Good drying and hardness.

Setal 253 SM-61 61 Solvent D40 Unsaturated fatty acids 4.3 8 Gardner n.a. n.a. max. 2.6 0.91 Fast air drying, good abrasion resistance and good chemical resistance.

Setal A U 601 TB* 55 White spirit Soya bean oil 1.2 3 Iodine n.a. n.a. max. 3.0 1.08 Rapid drying, excellent hardness, high abrasion resistance and good long-term flexibility.

Setal A U 601 HV TBA 51 Solvent D40 Soya bean oil 2.9 5 Iodine n.a. n.a. max. 3.0 0.91 Good hardness and flexibility, high resistance to wear and abrasion, good resistance to water and household cleaning agents.

MEDIUM OIL ALKYDSetal 707 BA-75 75 Butyl acetate Tall oil fatty acids 5.0 6 Gardner n.a. n.a. 7.6 1.04 For high solids acid catalyzed and nitrocellulose systems.

Setal 196 XX-65 65 Xylene Unsaturated fatty acids 4.8 7 Gardner n.a. n.a. max. 7.9 1.01 Very fast drying and through drying properties, good yellowing resistance, gloss and gloss retention.

Setal 773 SS-60 60 Solvent D40/ Methoxy propyl acetate

Linoleic rich oil 4.0 6 Gardner n.a. n.a. 6.4 0.94 Additive binder for high solids long oil alkyds to improve drying and hardness within the VOC compliance limits.

Setal 199 SS-55 * 55 White spirit/ Xylene

Unsaturated fatty acids 7.4 7 Gardner n.a. n.a. max. 6.7 0.93 Good drying properties, very good body, good colour, gloss retention and exterior durability.

Setal 771 SM-50 50 Solvent D40 Soya bean oil 2.2 8 Gardner n.a. n.a. max. 6.1 0.92 Fast initial drying, good through drying, brushability and durability.

MEDIUM OIL ALKYD, SILICONE MODIFIEDSetal 1601 WS-65 65 White spirit Unsaturated fatty acids 2.6 4.5 Gardner n.a. n.a. max. 6.7 0.96 Excellent outdoor durability, good drying.

NOTES 1) Values are indicative averages. See datasheets for actual specifications and measuring methods.2) Hydroxy Equivalent Weight (gram/equivalent), calculated on delivery form.* Other delivery form(s) available.n.a. Not applicable

9

Resin name NV 1)



OH - %(on solids)

HEW 2)



Technical features

SHORT OIL ALKYDSetal AF 251 X 75 Xylene Synthetic fatty acids 7.5 150 APHA 4.9 460 max. 12 1.08 Good gloss, high flexibility and high weather stability.

Setal 209 SS-70 70 Butyl acetate Synthetic fatty acids 4.4 4 Gardner 3.0 n.a. 6.4 1.06 Good surface hardness, excellent sprayability, practically non-yellowing.

Setal 84 XX-70 * 69

Xylene Synthetic fatty acids 5.1 2 Gardner 3.0 820

6.4 1.08 Very good durability, excellent colour and gloss retention, high body. Suitable for acid catalyzed, nitrocellulose, two-component and stoving systems.

Setal A F 300 SN 65 Solvent naphtha

Mixed fatty acids 4.7 5 Iodine 3.5 740

max. 4.0 1.04 High body, good flexibility, good resistance to acids and waxes, excellent adhesion to various primer surfacers and, in one-coat finishes, to bare metal. Very good pigment wetting.

Setal A F 26 X 60 Xylene Vegetable fatty acids 2.5 5 Iodine 2.2 1300 6.5 1.02 Very rapid drying and curing, high resistance to yellowing, good weather stability and good anti-corrosion properties.

Setal 142 XX-60 60 Xylene Soya bean fatty acids 3.7 5 Gardner n.a. n.a. 6.0 1.02 Very fast drying, good elasticity and yellowing resistance (also at elevated temperature), good adhesion on steel.

Setal A F 310 SN 60 Solvent naphtha

Saturated fatty acids 4.4 3 Iodine 1.8 1550 8.0 1.02 Highly reactive, high resistance to yellowing during overbaking, high body and gloss, good gloss retention and chalking resistance.

Setal 118 XX-60 60 Xylene Dehydrated castor oil 5.2 8 Gardner n.a. n.a. 9.6 1.03 Good hardness, scratch resistance, adhesion and impact resistance, good gloss retention, very good durability, excellent pigment wetting properties.

SHORT OIL ALKYD, ACRYLIC MODIFIEDSetyrene 78 XS-55 55 Butyl acetate/

XyleneTall oil fatty acids 0.9 3 Gardner 0.9 3430 4.6 1.02 Fast drying, good pigment wetting properties, good compatibility.

PHENOLIC RESINTungophen B NV 100 - n.a. n.a. n.a. n.a. n.a. n.a. n.a. Additive for alkyd coatings to improve flow, through drying and gloss.

Supplied as lozenges.

ALKYD AND ADDITIVE RESINS

SETAL

NOTES 1) Values are indicative averages. See datasheets for actual specifications and measuring methods.2) Hydroxy Equivalent Weight (gram/equivalent), calculated on delivery form.* Other delivery form(s) available.n.a. Not applicable

11

POLYESTER RESINS

SETAL

Resin name NV 1)



OH - %(on solids)

HEW 2)



Technical features

POLYESTER POLYOL Setal 1606 BA-80 80 Butyl acetate n.a. 3.8 125 APHA 5.2 410 8.5 1.08 High build and gloss, very good outdoor durability, good mechanical properties and

good chemical resistance.

Setal 166 SS-80 79 Butyl acetate/Xylene

n.a. 3.6 200 APHA 5.8 370 max. 1.7 1.10 Flexible lacquers, good outdoor durability.

Setal 168 SS-80 * 79 Butyl acetate/Xylene

n.a. 2.3 150 APHA 4.3 500 max.1.7 1.10 High flexibility, even at low temperatures. Good outdoor durability.


n.a. 2.1 200 APHA 5.8 390 max. 1.7 1.10 High flexibility, good outdoor durability.

Setal 1603 BA-78 76 Butyl acetate n.a. 6.0 150 APHA 5.4 410 16 1.08 High build and gloss, very good outdoor durability, good mechanical properties and good chemical resistance.


n.a. 3.4 250 APHA 4.4 520 7.6 1.06 Extremely good outdoor durability, no loss of gloss and no yellowing in QUV. Good mechanical properties and chemical resistance. Good compatibility with acrylic resins.

Setal A RD 181 X * 75 Xylene n.a. 7.5 150 APHA 4.9 460 max. 12 1.08 Weather resistant, good resistance to yellowing and aging, also suitable for pigment pastes.


n.a. 6.1 300 APHA 8.0 320 2.8 1.08 Excellent outdoor durability, excellent solvent and chemical resistance.

POLYESTER, WATER THINNABLESetal 6306 SS-60 60 Butyl glycol n.a. 2.0 6 Gardner 2.7 1050 26.0 1.04 Watersoluble after neutralisation, good pigment wetting, good stabilisation

of aluminium pigments, improves film forming and flow.

SATURATED POLYESTERSetal 1703 XX-75 73 Xylene n.a. 3.6 300 APHA 3.0 760 7.6 1.05 High solids content at spraying viscosity, good hardness and gloss.

Setal 1715 VX-74 72 Solvent naphtha/Xylene

n.a. 5.4 50 APHA 4.4 540 8.2 1.05 Extremely good outdoor durability, no loss of gloss and no yellowing in QUV, high solids content at spraying viscosity. Good mechanical properties and chemical resistance. Broad compatibility.


n.a. 1.5 500 APHA 3.3 790 5.3 1.06 Excellent pigment wetting, good hardness, very good adhesion and flexibility, good chemical and water resistance.

Setal 189 XX-65 65 Xylene n.a. 1.7 100 APHA 2.3 1140 13.0 1.06 High hardness, very good adhesion and flexibility, good chemical and water resistance, good compatibility with CAB and good pigment wetting.

Setal 1671 SS-65 65 Solvent naphtha/Butyl diglycol acetate/Isobuta-nol/Xylene

n.a. 1.2 8 Gardner 2.9 900 max. 5.9 1.06 Excellent chip resistance and mechanical properties, very good appearance.

Setal 173 VS-60 60 Solvent naphtha/Methoxy propanol/Xylene

n.a. 1.5 100 APHA 2.4 1180 4.8 1.04 High hardness, very good adhesion and flexibility, good chemical and water resistance.

NOTES 1) Values are indicative averages. See datasheets for actual specifications and measuring methods.2) Hydroxy Equivalent Weight (gram/equivalent), calculated on delivery form.n.a. Not applicable

13

ACRYLIC RESINS

SETALUX

Resin name OH - %(on solids)

HEW 1)

(as supplied)NV 2)

(%)Solvents Viscosity 2)

(23°C, Pa.s)Acid value 2)

(mg KOH/g)Colour(max. value)

Density(kg/dm3)

Technical features

ACRYLIC POLYOL - LOW SOLIDSSetalux 1197 SS-40 * 1.1 3860 40 Butyl acetate 4.0 7.6 35 APHA 0.98 Extremely fast drying, very good through hardening, good stackability and long potlife.

Setalux 1193 SS-51 1.3 2470 53 Butyl acetate 4.6 3.6 100 APHA 1.01 Extremely fast drying, very good through hardening, good stackability, long potlife, good light fastness.

Setalux D A 960 SN 1.3 2180 60 Solvent Naphtha 4.6 3.6 50 APHA 1.00 Good lightfastness and chalking resistance, good single-coat adhesion on steel and most non-ferrous metals.

Setalux 1182 SS-55 * 1.8 1720 55 Xylene/Butyl acetate 1.2 2.5 50 APHA 0.98 Excellent adhesion on metals such as aluminium, steel, zinc plated steel, stainless steel, excellent mechanical properties , good outdoor durability and quick drying.

Setalux 1194 SS-52 1.8 1820 52 Butyl acetate 22 10 50 APHA 1.00 Extremely fast drying, very good through hardening, good stackability.

Setalux 1200 XX-55 1.8 1720 55 Xylene 1.4 3.3 50 APHA 0.99 Fast drying and good adhesion on various substrates such as aluminium, steel, zinc plated steel, stainless steel. Good mechanical properties and good outdoor durability.

Setalux 1184 SS-51 2.0 1630 52 Butyl acetate 8.2 3.6 50 APHA 1.01 Excellent fast drying, very good through hardening, good stackability, long potlife, good chemical resistance, excellent mar and stain resistance, good light fastness, good compatibility with poly-isocyanates.

Setalux D A 450 BA * 2.0 1700 50 butyl acetate 4.0 4.0 50 APHA 1.01 Extremely fast-drying.

Setalux 1196 XX-60 * 2.6 1090 60 Xylene 1.8 3.6 50 APHA 1.00 Fast drying, good through hardening, good adhesion, good chemical resistance, good light fastness, good compatibility with poly isocyanates.

Setalux D A 160 X * 2.7 1050 60 Xylene 1.8 4.0 50 APHA 0.98 Good weather stability and good resistance to water, washing solutions and chemicals.

Setalux D A 163 X 2.7 1000 63 Xylene 4.4 4.0 50 APHA 0.98 Good weather stability and good resistance to water, washing solutions and chemicals. Higher solids content than Setalux D A 160 X.

Setalux 1214 XS-54 2.8 1120 54 Xylene/Butyl acetate 2.1 3.3 50 APHA 1.00 Fast drying and good adhesion on various substrates such as aluminium, steel, zinc plated steel, stainless steel; good mechanical properties and good outdoor durability.

Setalux 1186 SS-60 3.0 930 61 Xylene/Solvent naphtha/ Butyl acetate

2.0 4.8 40 APHA 1.00 Excellent hardness, very good exterior durability, good gloss, good build, excellent solvent and mechanical resistance and excellent mechanical properties.

Setalux D A 760 BA/X 3.0 940 60 Xylene/Butyl acetate 2.0 6.5 50 APHA 1.02 Good light stability, chalking resistance and gloss retention.

Setalux 1199 XS-60 3.5 810 60 Xylene/Solvent naphtha/ Butyl acetate

5.4 6.9 35 APHA 1.01 High mechanical strenght and good corrosion, chemical and weather resistance.

Setalux 1187 XX-60 3.6 790 60 Xylene 0.36 3.6 50 APHA 1.01 Excellent mechanical properties and chemical resistance, high-medium solids. In combination with IPDI based hardeners: high solid, high build, good gloss, excellent outdoor durability and light fastness, good mechanical properties.

Setalux 1192 SS-60 3.8 730 61 Butyl acetate 3.4 4.0 35 APHA 1.03 Very fast drying at room and elevated temperature, excellent appearance, easy application, good outdoor durability, good adhesion results on metallic basecoats, good yellowing resistance in accelarated weathering tests.

Setalux 1152 SS-60 * 4.2 660 61 Xylene/Methoxy propyl acetate 3.6 4.8 75 APHA 1.04 Easy application, even under conditions of high humidity and low temperatures. High build and practically no yellowing under UV light, excellent exterior durability, good mechanical properties and chemical resistance.

Setalux 1151 XX-51 * 4.4 760 51 Xylene 1.0 4.1 60 APHA 0.99 Excellent hardness, very good exterior durability, excellent mechanical properties, easy application facilities especially in airless-spray equipment and also under severe humidity conditions and low temperatures.

Setalux 1189 SS-60 4.5 630 60 Xylene/Methoxy propyl acetate 5.1 4.5 25 APHA 1.03 Good build and gloss, fast drying with high end-hardness, good exterior durability.

Setalux 1190 SS-61 4.5 620 61 Xylene/Methoxy propyl acetate 8.2 4.5 35 APHA 1.03 Good build and gloss, high end-hardness, good exterior durability.

Setalux 1208 XS-55 4.5 700 54 Xylene/Solvent naphtha/ Butyl acetate

5.5 4.2 50 APHA 1.01 Fast initial drying and through drying, high end-hardness, good gloss and good exterior durability.

NOTES 1) Hydroxy Equivalent Weight (gram/equivalent), calculated on delivery form.2) Values are indicative averages. See datasheets for actual specifications and measuring methods.* Other delivery form(s) available.

15


HEW 1)

(as supplied)NV 2)




Density(kg/dm3)

Technical features

ACRYLIC POLYOL - MEDIUM SOLIDSSetalux D A 170 BA 2.6 930 70 Butyl acetate 3.8 13 50 APHA 1.02 Broad application properties (brushing, rolling and airless spraying), good weather stability,

resistance to water, washing solutions and chemicals.

Setalux 1218 VX-70 2.8 870 70 Solvent naphtha/Xylene 3.8 6.5 50 APHA 1.01 Fast drying and good chemical resistance., good adhesion

Setalux D A HS 1470 SN/X

2.8 860 71 Solvent naphtha/Xylene 3.5 6.5 100 APHA 1.02 High hardness and thoughness with good flexibility, high gloss, good filling power, good weather- and light stability, good resistance to solvents and gasoline.

Setalux 1202 SS-70 * 3.0 810 70 Butyl acetate 1.8 6.0 20 APHA 1.02 Fast drying, good hardness, good outdoor durability,good gloss and build, good solvent and chemical resistance and good mechanical properties.

Setalux 1207 BA-70 3.0 810 70 Butyl acetate 3.3 9.3 35 APHA 1.04 Good gloss and build, good solvent and chemical resistance and good mechanical properties including good adhesion on different metals.

Setalux 1211 BA-65 3.0 870 65 Butyl acetate 1.8 6.5 35 APHA 1.03 Suitable for the manufacture of airdrying and forced drying two component paints with high mechanical strength, good weather resistance and good appearance.

Setalux D A 265 BA 3.1 840 65 Butyl acetate 2.3 max. 15 150 APHA 1.06 High hardness with good flexibility, high gloss, high body, good lightfastness and weather stability.

Setalux 1905 BA-74 3.3 700 74 Butyl acetate 3.9 6.7 50 APHA 1.05 High build and gloss, excellent mechanical properties and good outdoor durability

Setalux D A HS 1170 BA 3.6 670 70 Butyl acetate 1.2 7.0 50 APHA 1.05 High hardness and thoughness with good flexibility, high gloss and body, outstanding lightfastness and weather stability, good resistance to solvents and petrol.

Setalux 1911 BA-70 4.0 610 70 Butyl acetate 1.1 7.5 100 APHA 1.05 High build and gloss, good mechanical properties, good outdoor durability in combination with aliphatic poly-isocyanates.

Setalux D A 565 X 4.0 655 65 Xylene 1.0 5.0 100 APHA 1.03 High hardness with very high flexibility, high gloss and body, outstanding weather- and lightfastness, good reistance against solvents and petrol.

Setalux 1198 SS-70 4.2 580 70 Butyl acetate 9.0 6.7 35 APHA 1.05 Good exterior durability, good build and gloss, high end hardness and good adhesion results on metallic basecoats.

Setalux 1753 SS-70 * 4.2 580 70 Butyl acetate 4.5 10 35 APHA 1.04 Fast drying, high build and gloss, excellent mechanical properties and chemical resistance, practically no yellowing under UV-light, high solids content at application viscosity.

Setalux D A 870 BA 4.2 575 70 Butyl acetate 3.5 7.5 50 APHA 1.03 High hardness with very high flexibility, high gloss and body, outstanding weather- and lightfastness, good reistance against solvents and petrol.

Setalux 1215 BA-68 4.5 560 67 Butyl acetate 5.0 5.0 35 APHA 1.03 Suitable for the manufacture of air-drying and forced drying two component lacquer systems with good exterior durability, good build and gloss, high end hardness and excellent chemical resistance.

Setalux 1767 VV-65 4.5 580 65 Solvent naphtha 3.0 9.8 100 APHA 1.00 Increased solids level with good adhesion, appearance, durability, chemical and petrol resistance. For two-component stoving, low Tg.

Setalux 1769 VV-65 4.5 580 65 Solvent naphtha 7.3 10 100 APHA 1.02 Increased resistance against polishing marks, good adhesion, appearance, durability, chemical and petrol resistance. Suitable for use with HMDI based isocyanates as sole crosslinker. For two-component stoving, high Tg.

Setalux D A 365 BA/X 4.5 580 65 Butyl acetate/Xylene 3.0 7.5 100 APHA 1.04 High hardness and thoughness with good flexibility, high gloss and body, excellent weather stability and lightfastness, good resistance to solvents and petrol.

Setalux D A 665 BA * 4.6 530 70 Butyl acetate 8.5 7.5 100 APHA 1.05 High hardness and thoughness with good flexibility, high gloss and body, outstanding weather stability and lightfastness, good resistance to solvents and petrol.

Setalux D A 1272 BA 4.7 500 72 Butyl acetate 2.8 9.0 60 APHA 1.07 Good drying properties, good build and gloss, high hardness, good mechanical properties and good outdoor durability.

ACRYLIC RESINS

SETALUX


17


HEW 1)

(as supplied)NV 2)




Density(kg/dm3)

Technical features

ACRYLIC POLYOL - HIGH SOLIDSSetalux 1917 BA-80 2.1 1010 80 Butyl acetate 9.5 max. 8.2 65 APHA 1.04 Fast drying, good adhesion and very good durability.

Setalux D A HS 1375 BA 2.8 810 75 Butyl acetate 5.0 8.0 100 APHA 1.04 High hardness and thoughness with good flexibility, high gloss, good filling power, good weather and light stability and good resistance to solvents and gasoline.

Setalux 1913 BA-75 3.0 760 75 Butyl acetate 4.5 7.6 70 APHA 1.04 Good drying properties, good build and gloss, high hardness, good mechanical properties and good outdoor durability.

Setalux 1910 BA-75 3.6 630 75 Butyl acetate 6.8 6.8 35 APHA 1.04 High build and gloss, good hardness build-up, good mechanical properties and good outdoor durability.

Setalux D A 575 X 3.7 610 75 Xylene 3.5 5.0 100 APHA 1.06 High flexibility, lightfast and weather-stable.

Setalux 1906 BA-75 4.0 570 75 Butyl acetate 9.0 9.7 35 APHA 1.05 Fast drying, high build and gloss, excellent mechanical properties and good outdoor durability.

Setalux 1914 BA-75 4.1 550 75 Butyl acetate 6.8 9.1 50 APHA 1.05 High build and gloss, good mechanical properties, good chemical resistance and good outdoor durability.

Setalux 1915 BA-75 4.1 550 75 Butyl acetate 5.8 4.5 50 APHA 1.06 Super fast drying, high build and gloss, good mechanical properties, good chemical resistance and good outdoor durability.



Setalux 1908 BA-75 4.5 500 75 Butyl acetate 4.2 6.7 30 APHA 1.04 Low spray viscosity, high build and gloss, good mechanical properties, good chemical resistance and good outdoor durability.

Setalux 1916 BA-76 4.5 500 76 Butyl acetate 5.2 6.1 50 APHA 1.05 Outstanding appearance, good mechanical properties, good chemical resistance and good outdoor durability.

Setalux 1909 BA-75 5.0 450 75 Butyl acetate 2.8 6.3 35 APHA 1.06 Excellent scratch resistance.

Setalux 1901 SS-75 5.4 420 75 Butyl acetate 3.2 max. 3.8 35 APHA 1.04 High build and gloss, excellent mechanical properties, good chemical resistance and good outdoor durability.

THERMOPLASTIC ACRYLICSetalux 2117 XS-30 0.6 9140 31 Butyl acetate/Xylene 1.4 max. 0.3 200 APHA 0.95 Fast drying.

Setalux 1385 BX-51* 1.7 1920 52 Xylene/n-Butanol 0.9 5.4 50 APHA 0.99 Good compatibility with cellulose aceto-butyrate resins.

Setalux 2120 XS-40 1.7 2380 42 Xylene/Butyl acetate 3.0 4.0 35 APHA 0.97 Very fast drying and good compatibility.

THERMOSETTING ACRYLICSetalux 1756 VV-65 2.7 970 65 Solvent naphtha 3.8 11 125 APHA 1.01 High solids content at spraying viscosity, good durability and gloss.

Setalux 1757 VV-70 3.6 670 70 Solvent naphtha 4.5 8.4 125 APHA 1.03 High solids content at spraying viscosity, excellent gloss, good mechanical properties, good solvent and acid resistance, adhesion and excellent accelerated wheathering test.

Setalux 1760 VB-64 3.6 740 64 Solvent naphtha/n-Butanol 6.0 13 100 APHA 1.01 Excellent carwash resistance results, excellent gloss and DOI, good mechanical properties, excellent solvent and acid resistance.

Setalux 1798 VS-70 3.8 640 70 Solvent naphtha/Butyl acetate 3.8 8.4 100 APHA 1.02 Excellent gloss and DOI, good flexibility, good solvent and acid resistance, excellent water and humidity resistance.

Setalux 1770 VS-70 4.5 540 70 Solvent naphtha/Butyl acetate 1.8 9.5 100 APHA 1.02 Outstanding carwash resistance.

Setalux 1772 VB-70 4.5 540 70 Solvent naphtha/n-Butanol 4.2 9.5 100 APHA 1.00 Outstanding carwash resistance, higher viscosity.

Setalux 1795 VX-74 4.5 510 74 Solvent naphtha/Xylene 3.8 8.2 50 APHA 1.02 Excellent appearance (DOI, flow), good outdoor durability, good mechanical properties, good solvent and acid resistance. High solids content at spraying viscosity.

ACRYLIC RESINS

SETALUX


19


HEW 1)

(as supplied)NV 2)




Density(kg/dm3)

Technical features

THERMOSETTING ACRYLIC, WATER THINNABLESetalux 6100 GR-68 2.0 1250 68 Butyl diglycol 8.2 12 250 APHA 1.05 Good pigment wetting, easy application, good gloss, good chemical resistance and

excellent durability.

NON AQUEOUS ACRYLIC DISPERSIONSetalux 1850 SA-50 n.a. n.a. 50 Aliphatic hydrocarbons/

n-Butanol0.08 max. 1.5 n.a. 0.91 Low viscosity, very good application properties, excellent yellowing resistance.

ACRYLIC TWO-COMPONENT NCO FREESetalux 8402 XS-55 n.a. n.a. 56 Xylene/Butyl acetate 11 10 250 APHA 1.00 Amine functional acrylic with amine equivalent weight 1300 g/eq. Fast drying, high gloss,

good build, good mechanical properties and excellent outdoor durability.

Setalux 8403 SS-55 n.a. n.a. 56 Butyl acetate 3.2 8.8 250 APHA 1.00 Amine functional acrylic with amine equivalent weight 655 g/eq. Fast drying, high gloss, good mechanical properties and excellent outdoor durability. Lower viscosity.

Setalux 8502 BX-60 n.a. n.a. 60 Xylene/n-Butanol 1.9 max. 1.2 100 APHA 1.01 Epoxy functional acrylic with epoxy equivalent weight 570 g/eq. Fast drying, high gloss, good mechanical properties and excellent outdoor durability.

Setalux 8503 SS-60 n.a. n.a. 60 Butyl acetate 0.26 max. 1.2 100 APHA 1.02 Epoxy functional acrylic with epoxy equivalent weight 569 g/eq. Fast drying, high gloss, good mechanical properties and excellent outdoor durability, Lower viscosity.

ACRYLIC RESINS

SETALUX

NOTES 1) Hydroxy Equivalent Weight (gram/equivalent), calculated on delivery form.2) Values are indicative averages. See datasheets for actual specifications and measuring methods.n.a. Not applicable

21

Resin name Thix index 1) Viscosity 1/s 2)

(23°C, Pa.s)

Viscosity 1000/s 2)

(23°C, Pa.s)

NV 1)

(%)Solvents OH - %

(on solids)HEW 3)

(as supplied)Density(kg/dm3)

Technical features

THERMOSETTING ACRYLIC, SCA 4) MODIFIEDSetalux 71760 VB-60 3.2 9.5 3.0 60 Solvent naphtha/n-Butanol 3.6 790 0.99 Excellent appearance in combination with a good sagging limit. Excellent carwash

resistance results, excellent gloss and DOI, good mechanical properties, excellent solvent and acid resistance.

Setalux 71757 VX-60 6.5 8.5 1.3 60 Solvent naphtha/Xylene 3.6 790 1.00 Excellent appearance due to an optimal balance between flow and sagging, excellent gloss, good mechanical properties, acid and solvent resistance. Good adhesion and excellent accelerated weathering test.

Setalux 71761 VB-60 6.8 21 3.1 60 Solvent naphtha/n-Butanol 4.1 690 1.00 Excellent appearance due to an optimal balance between flow and sagging, excellent carwash, acid and solvent resistance, excellent gloss, good mechanical properties.

Setalux 91795 VX-60 7.6 3.8 0.5 60 Solvent naphtha/Xylene 4.5 630 0.98 Excellent appearance (DOI, flow), excellent application properties, good sagging limit, good outdoor durability, good mechanical properties, good solvent and acid resistance.

Setalux 91757 VX-60 9.4 8.5 0.9 60 Solvent naphtha/Xylene 3.6 790 0.99 Excellent gloss, good mechanical properties, solvent and acid resistance, good adhesion and excellent accelerated weathering test, good sagging limit, excellent application properties.

Setalux 91389 VX-45 10.0 5.0 0.5 47 Solvent naphtha/Xylene 1.8 2010 0.96 Excellent outdoor durability, good colour retention, adhesion and durable flexibility on basecoat, good appearance and sagging limit.

Setalux 91760 SS-53 10.5 11.5 1.1 53 Solvent naphtha/n-Butanol/Propylene glycol 3.6 890 0.99 Excellent carwash resistance results, excellent gloss and DOI, good mechanical properties, excellent solvent and acid resistance. Good sagging limit and excellent application properties.

Setalux 91756 VS-60 11.7 14 1.2 60 Solvent naphtha/Butyl acetate 2.7 1050 0.97 High solids content at spraying viscosity, excellent hardness, very good filling power and gloss, good outdoor durability, good chip resistance, very good petrol and solvent resistance, very good acid resistance, good sagging limit.

Setalux 91772 SS-60 15.3 23 1.5 60 Solvent naphtha/n-Butanol/Propylene glycol 4.5 630 1.02 Excellent carwash resistance results (also after weathering), excellent gloss and DOI, good mechanical properties, good solvent and acid resistance. Good sagging limit and excellent application properties.

Setalux 91795 VX-60 YB 16.4 11.5 0.7 60 Solvent naphtha/Xylene 4.5 630 0.98 Excellent appearance (DOI, flow), excellent application properties, excellent sagging limit, good outdoor durability, good mechanical properties, good solvent and acid resistance.

Setalux 91796 SS-69 19.0 21 1.1 69 Solvent naphtha/Butyl acetate/Proplene glycol ethyl ether acetate

4.5 550 0.99 Higher solids, scratch resistance.

ACRYLIC POLYOL, SCA 4) MODIFIEDSetalux 91767 VX-60 4.6 6.0 1.3 60 Solvent naphtha/Xylene 4.5 630 1.00 Excellent anti-sagging effect, good appearance, adhesion, durability, chemical and

petrol resistance and excellent application properties.

Setalux 81198 SS-55 YA 7.3 4.0 0.55 55 Butyl acetate 4.0 770 1.00 High build and gloss, high sagging limit, fast drying, excellent mechanical properties and chemical resistance, good clarity after drying at room temperature, high end hardness and good adhesion results on metallic basecoats.

Setalux 91780 VS-60 7.5 6.0 0.8 60 Solvent naphtha/Butyl acetate 4.5 630 1.00 Very good application properties, excellent appearance and good adhesion, durability, chemical and petrol resistance.

Setalux 81753 SS-55 15.0 6.0 0.4 56 Butyl acetate 4.2 720 1.00 High build and gloss, high sagging limit, fast drying, excellent mechanical properties and chemical resistance, good clarity after drying at roomtemperature, good adhesion on metallic basecoats.

RHEOLOGY CONTROL RESINS

SETALUX

NOTES 1) The ratio between low shear (1/s) viscosity and high shear viscosity.2) Values are indicative averages. See datasheets for actual specifications and measuring methods.3) Hydroxy Equivalent Weight (gram/equivalent), calculated on delivery form.4) Sag Control Agent

23

Resin name Thix index 1) Viscosity 1/s 2)

(23°C, Pa.s)

Viscosity 1000/s 2)

(23°C, Pa.s)

NV 1)

(%)Solvents OH - %

(on solids)HEW 3)

(as supplied)Density(kg/dm3)

Technical features

LONG OIL ALKYD, THIXOTROPIC MODIFIEDSetal 50293 HD-85 YA n.a. n.a. n.a. 85 Solvent D60 n.a. n.a. 0.90 Almost insensitive to higher temperatures and presence of polar solvents.

Very high solids content of the thixotropic resin.

Setal 50270 HD-58 YA n.a. n.a. n.a. 58 Solvent D60/D70 n.a. n.a. 0.90 High gel strength while still pumpable, additive resin for high gloss topcoats.

SHORT OIL ALKYD, SCA 5) MODIFIEDSetal 90084 BX-67 3.9 7.0 1.8 66 Xylene/n-Butanol 3.0 860 1.03 Good appearance and sagging limit, very good durability, excellent colour and gloss

retention, high body.

POLYESTER POLYOL, SCA 5) MODIFIEDSetal 81462 SS-55 15.3 2.75 0.18 54 Butyl acetate/Xylene 5.4 570 1.04 Good anti-sag property with good levelling and clarity after drying at increased or

ambient temperature. Good outdoor durability, mechanical properties and excellent yellowing resistance.

Setal 82166 SS-64* 15.6 6.25 0.4 63 Butyl acetate/Xylene 5.4 490 1.05 Good anti-sag property with good levelling and clarity after drying at increased or ambient temperature. Good outdoor durability, excellent mechanical properties.

SATURATED POLYESTER, SCA 5) MODIFIEDSetal 91703 SS-53 10.3 3.1 0.3 52 Solvent naphtha heavy/Xylene 3.0 1090 0.98 Prevents sagging of higher solids systems without effect on the gloss of the system.

Setal 90173 SS-50 40 20 0.50 50 Xylene/Solvent naphtha/Methoxy propanol 2.4 1420 0.97 Good compatibility with CAB, excellent rheology control, good metallic effect, good adhesion and flexibility.

Setal 91715 SS-55 61 13.5 0.22 52 Xylene/Solvent naphtha 4.3 740 0.94 Excellent anti-sagging effect, extremely good outdoor durability, high solids content at spraying viscosity, good mechanical properties and chemical resistance.

PSEUDO PLASTIC ACRYLIC DISPERSIONSetaqua 6801 73 22 0.3 4) 24 Demineralized water n.a. n.a. 1.02 Pseudoplastic after neutralization, good aluminium orientation, good atomisation,

insoluble in organic solvents, excellent stability. Low co-solvent demand.

Setaqua 6803 107 32 0.3 4) 24 Demineralized water 0.8 8850 1.03 Pseudoplastic after neutralization, good aluminium orientation, good atomisation, insoluble in organic solvents, excellent stability.. High hardnes. For stoving systems.

Setaqua 6802 162 65 0.4 4) 24 Demineralized water 1.2 5900 1.03 Pseudoplastic after neutralization, good aluminium orientation, good atomisation, insoluble in organic solvents, excellent stability. High hardness.

RHEOLOGY CONTROL RESINS

SETAL, SETAQUA

NOTES 1) The ratio between low shear (1/s) viscosity and high shear viscosity.2) Values are indicative averages. See datasheets for actual specifications and measuring methods.3) Hydroxy Equivalent Weight (gram/equivalent), calculated on delivery form.4) Viscosity measured at 500/s.5) Sag Control Agent.* Other delivery form(s) available.n.a. Not applicable

25

WATER BORNE POLYOL RESINS

SETAQUA


HEW 1)

(as supplied)NV 2)



(mg KOH/g)pH 2) Density

(kg/dm3)Technical features

ACRYLIC POLYOL DISPERSIONSetaqua 6522 2.4 1690 42 Demineralized water n.a. 48 7.5 1.00 Fast drying.

Setaqua 6520 3.2 1180 45 Demineralized water n.a. n.a. 6.8 1.05 Very good drying properties, good mechanical properties and good water resistance.

ACRYLIC POLYOL EMULSIONSetaqua 6160 2.6 1450 45 Butyl glycol n.a. 8.6 8.0 1.04 High gloss, excellent chemical resistance and durability. Combine with Setalux 6100 GR-68.

Setaqua 6515 3.3 1140 45 Butyl glycol/Solvent naphtha n.a. 9.9 8.0 1.05 High durability, good abrasion- and chemical resistance, compatible with hydrophobic polyisocyanates.

Setaqua 6514 3.5 1210 40 Dowanol PnP 3) 0.5 9.6 8.5 1.06 Butyl glycol free, fast drying, good durability, abrasion-and chemical resistance.

Setaqua 6516 3.5 1210 40 Butyl glycol 0.6 9.6 8.5 1.06 Fast drying, good durability, abrasion and chemical resistance.

Setaqua 6510 4.2 960 42 Butyl glycol 0.6 8.8 8.0 1.05 Good durability, abrasion- and chemical resistance.

Setaqua 6511 4.2 860 47 Butyl glycol 0.6 7.6 8.0 1.04 Good appearance, good durability, abrasion- and chemical resistance.

Setaqua 6513 4.2 920 44 Dowanol PnP 3) 0.5 7.1 8.0 1.04 Butyl glycol free, good appearance, good durability, abrasion- and chemical resistance.

POLYESTER POLYOL, WATER THINNABLESetaqua B E 155 1.5 2060 55 2-Butoxy ethanol/ Isobutanol 7.3 23 8.5 1.25 Extremely good resistance to hydrolysis.

Setaqua B E 356 1.5 2020 56 Diethylene glycol monobutyl ether

9.5 23.5 8.6 1.12 Extremely good resistance to hydrolysis. Different solvent blend.

Setaqua 6407 2.7 2420 26 Butyl glycol 4.4 11.1 8.0 1.04 Good pigment wetting, good stabilisation of aluminium pigments, improves film forming and flow.

Setaqua B E 270 2.9 840 70 Butyl diglycol 12 35 8.0 1.10 Good hardness, flexibility and adhesion. High stone chip resistance.

Resin name MFT (approx.)

(°C) NV 2)


(23°C, Pa.s)pH 2) Density


THERMOPLASTIC ACRYLIC DISPERSIONSetaqua 6405 14 40 Demineralized water n.a. 6.5 1.05 Excellent flow, excellent penetration of hard wood, good stainblocking properties, very good sandability in primers.

Setaqua 6462 25 44 Demineralized water 0.08 7.8 1.03 Fast drying, good water and humidity resistance.

Setaqua 6741 25 43 Demineralized water 1.0 8.0 1.04 Good water and chemical resistant. Non-yellowing and good durability.

Setaqua 6406 50 40 Demineralized water n.a. 7.0 1.04 Fast drying and good blocking resistance.

SELF-CROSSLINKING ACRYLIC DISPERSIONSetaqua 6773 max. 5 44 Demineralized water max. 1.0 8.5 1.04 Good wood tannin blocking. Good adhesion on bare wood and old alkyd paints.

Setaqua 6776 max. 5 44 Demineralized water n.a. 8.9 1.05 High gloss, good appearance, good application properties and blocking resistance, good early water resistance.

Setaqua ECO 6789 max. 5 44 Demineralized water n.a. 8.9 1.05 High gloss, good appearance, good application properties and blocking resistance.

Setaqua 6771 18 44 Demineralized water max. 0.3 9.0 1.04 High gloss, good appearance, good application properties and good wood tannin blocking.

Setaqua ECO 6778 21 44 Demineralized water n.a. 8.8 1.04 High durability, good blocking resistance.

Setaqua 6778 21 44 Demineralized water 0.35 8.8 1.04 High gloss, good appearance, good application properties and excellent blocking resistance.

Setaqua 6764 25 42 Demineralized water max. 0.5 7.5 1.05 Excellent adhesion, good corrosion resistance, good hardness and high gloss.

Setaqua 6750 30 45 Demineralized water 0.04 9.0 1.05 High gloss, good appearance, excellent chemical- and blocking resistance.

WATER BORNE ACRYLIC DISPERSIONS

SETAQUA

NOTES 1) Hydroxy Equivalent Weight (gram/equivalent), calculated on delivery form.2) Values are indicative averages. See datasheets for actual specifications and measuring methods.3) Dowanol is a registred trademark of The Dow Chemical Companyn.a. Not applicable

27

Resin name MFT (approx.)

(°C) NV 1)


(23°C, Pa.s)pH 1) Density


SELF-CROSSLINKING ACRYLIC DISPERSION, SURFACTANT FREESetaqua 6774 max. 5 43 Demineralized water n.a. 8.0 1.05 High durability, translucent, good flexibility.

Setaqua 6790 max. 5 44 Demineralized water n.a. 8.0 1.05 Good flexibility and high durability, excellent water resistance, good blocking resistance and low water uptake, good response to associative thickeners.

Setaqua 6782 3 40 Demineralized water max. 0.3 8.5 1.04 Fast drying, good hardness and blocking resistance, good adhesion, good chemical resistance and good outdoor durability.

Setaqua 6784 10 44 Demineralized water max. 1.0 9.0 1.04 Good flexibility and high durability. Especially developed to give excellent response to low amounts of associative thickeners and exhibits excellent viscosity stability.

Setaqua 6786 10 44 Demineralized water max. 1.0 8.5 1.04 Good flexibility and high durability, excellent response to low amounts of associative thickeners, exhibits excellent viscosity stability.

Setaqua 6755 12 40 Demineralized water max. 0.15 8.0 1.04 Fast drying with high hardness, exceptional chemical resistance, in can clarity and solvent-borne like film clarity.

Setaqua 6768 13 40 Demineralized water max. 1.0 8.5 1.03 Very good adhesion, fast drying, good blocking resistance and good hardness, good chemical resistance, good outdoor durability.

Setaqua 6756 15 40 Demineralized water max. 0.7 8.0 1.04 Excellent hardness, fast drying and good sandability and exceptional chemical resistance, good in-can clarity and a solvent-borne like film appearance.

Setaqua 6781 15 44 Demineralized water 0.8 8.8 1.04 High gloss, good appearance, good application properties and excellent blocking resistance.

Setaqua 6785 15 44 Demineralized water n.a. 8.8 1.04 Exceptional water and chemical resistance as well as dry and wet heat resistance, excellent response to thickeners and matting agents. Compatible with polyisocyanates.

Setaqua 6759 25 41 Demineralized water n.a. 8.0 1.00 Fast drying and good hardness, particularly suitable for primers and sealers.

Setaqua ECO 6788 25 42 Demineralized water 1.0 8.2 1.03 Excellent hardness, fast drying and good sandability, exceptional chemical resistance, good in-can clarity and a solvent-borne like film appearance.

Setaqua 6754 58 40 Demineralized water max. 0.15 9.0 1.05 Good hardness, gloss, chemical and blocking resistance.

UV-ASSISTED SELF-CROSSLINKING ACRYLIC DISPERSIONSetaqua 6751 1 36 Demineralized water n.a. 7.0 1.08 Excellent hardness, fast drying, good sandability and exceptional chemical resistance, good appearance., excellent response to

low amounts of matting agent.

SPECIAL ACRYLIC DISPERSIONSetaqua 6302 max. 5 50 Demineralized water 2.0 8.0 1.03 Excellent flow, leveling and gloss, fast build up of hardness and water resistance, outstanding adhesion, hardness, gloss and water

resistance. Outstanding high shear stability; can be used as a grinding medium.

Setaqua 6376 50 50 Demineralized water n.a. 8 1.05 Very efficient pigment dispering resin, gives fast cohesive strength, water resistance development and improved chemical resistance, including coffeestain resistance.

Setaqua 6301 min. 60 40 Demineralized water max. 0.1 5 1.04 Additive resin to improve hardness and drying speed. Improves block-resistance, sandability and stackability at addition levels of 10-20 weight%.

WATER BORNE ACRYLIC DISPERSIONS

SETAQUA

NOTES 1) Values are indicative averages. See datasheets for actual specifications and measuring methods.n.a. Not applicable

29

OTHER WATER BORNE RESINS

SETAQUA

Resin name NV 1)



(mg KOH/g)pH 1) Density


AMINE-FUNCTIONAL ACRYLIC EMULSIONSetaqua 8455 36 Demineralized water/Propylene

glycol monomethylethern.a. 8.0 9.8 1.05 Amine equivalent weight 655 g/eq. Low co-solvent content, fast drying and excellent water

resistance.

EPOXY-FUNCTIONAL ACRYLIC DISPERSIONSetaqua 8550 50 Demineralized water n.a. n.a. n.a. 1.05 Epoxy equivalent weight 621 g/eq. Easy mixable, fast drying and excellent water resistance.

Setaqua 8554 50 Demineralized water n.a. n.a. n.a. 1.05 Epoxy equivalent weight 621 g/eq. Alkyl phenol ethoxylate and co-solvent free. For Metal applications. Gives fast drying and good water resistance.

Setaqua 8555 50 Demineralized water n.a. n.a. n.a. 1.05 Epoxy equivalent weight 621 g/eq. Alkyl phenol ethoxylate and co-solvent free. For Wood applications. Gives excellent blocking of tannin and tree resin.

FATTY ACID MODIFIED URETHANE-ACRYLIC DISPERSIONSetaqua 6250 38 Demineralized water n.a. n.a. 6.5 1.04 Excellent open-time and wet-edge.

AIR-DRYING URETHANE MODIFIED ALKYD EMULSIONSetaqua 6006 52 Demineralized water 0.4 n.a. 7.4 1.09 Very fast drying, excellent stain blocking and wood penetration.

Setaqua 6002 46 Demineralized water 1.4 n.a. 7.4 1.07 Fast drying, good flexibility, excellent stain blocking and wood penetration.

Setaqua 6004 46 Demineralized water 1.4 n.a. 7.4 1.05 Fast drying, excellent stain blocking and wood penetration, good water resistane, very good yellowing resistance.

CO-POLYMER DISPERSIONSetaqua B B 130 30 Demineralized water 2.3 22 8.8 2) 1.00 Good anti-corrosion properties, water resistance and adhesion on non-ferrous metals and

various plastic surfaces.

Setaqua B B 2624 30 Demineralized water 2.3 22 8.8 2) 1.00 Outstanding anti-corrosion properties, water resistance and adhesion on ferrous and non-ferrous metals and various surfaces.

NOTES 1) Values are indicative averages. See datasheets for actual specifications and measuring methods.2) Thinned 1:2 with demineralized watern.a. Not applicable

31

AMINO RESINS

SETAMINE

Resin name Free formaldehyde(%)

NV 1)


(23°C, Pa.s)Naphtha tolerance(%)

Acid value 1)


Density(kg/dm3)

Technical features

PARTLY BUTYLATED MELAMINE RESINSSetamine US-144 BB-60 0.2 60 n-Butanol 0.75 300 - 700 max. 1.2 50 APHA 0.99 Very good compatibility, high reactivity, exellent sprayability, good

petrol- and acid resistance, excellent appearance and high gloss.

Setamine US-146 BB-72 0.3 72 n-Butanol 3.0 1000 - 1700 max. 0.7 50 APHA 1.04 Excellent appearance and gloss, excellent water resistance, medium reactivity, good acid resistance, good mechanical properties.

Setamine US-134 BB-57 0.4 57 Isobutanol 0.54 750 - 1500 max. 1.2 50 APHA 0.97 Rapid cure at low stoving temperatures and short stoving times, high gloss, excellent compatibility with medium-and short oil alkyd resins.

Setamine US-138 BB-70 0.5 71 n-Butanol 1.4 700 - 1200 max. 0.3 35 APHA 1.03 Very good compatibility, high reactivity with low viscosity, excellent sprayability, good petrol- and acid resistance, high gloss.

Setamine US-132 BB-71 0.6 71 n-Butanol 9.0 275 - 475 max. 1.5 50 APHA 1.05 Good film hardness, body, gloss and alkali resistance, excellent exterior durability.

Setamine US-136 BB-57 0.7 56 Isobutanol 0.66 700 - 1200 max. 1.2 50 APHA 0.98 Fast cure and sufficient hardness at low stoving temperatures and short stoving times, good stability, high gloss, good compatibility with medium- and short oil alkyd resins.

HYDROPHOBIC POLYOL RESINS / BISOXAZOLIDINE RESINS

SETATHANE, SETA


HEW 2)

(as supplied)NV 1)


(23°C, mPa.s)Acid value 1)

(mg KOH/g)pH 1) Colour

(max. value)Density(kg/dm3)

Technical features

POLYETHER-ESTER POLYOLSetathane D 1150 4.7 360 100 - 3500 max. 2 n.a. 5 Iodine 1.01 Tough and flexible, hard-wearing and chemical resistant.

Setathane D 1155 5.0 340 100 - 425 max. 2 n.a. 5 Iodine 0.99 Especially suitable for combination with Setathane D 1145 and Setathane D 1150 in the formulation of solvent-free, self-leveling polyurethane coatings of low viscosity.

Setathane D 1160 5.4 315 100 - 1000 1.7 n.a. 5 Iodine 0.99 High flexibility and good mechanical strength.

Setathane D 1145 7.1 240 100 - 2950 max. 2 n.a. 5 Iodine 1.01 Hard to tough but flexible films which are resistant to abrasion and chemicals.

POLYOL EMULSIONSetathane D E 2761 3.6 680 70 Demineralized water 200 n.a. 7 n.a. 1.0 Very good thermal-shock resistance and resistance to organic and inorganic acids,

alkalis and solvents.

Setathane D E 2656 4.3 565 70 Demineralized water 150 n.a. 7 n.a. 1.0 Very good resistance to organic and inorganic acids, alkalis and solvents.

Setathane D E 2767 17.8 110 90 Demineralized water 1200 n.a. 6.5 n.a. 1.1 Outstanding resistance to organic and inorganic acids, alkalis and solvents.

URETHANE BISOXAZOLIDINESeta H 2959 - 330 3) 100 - 3000 n.a. n.a. 4 Iodine 1.07 Latent hardener for polyisocyanates in one-component polyurethane systems in

outdoor areas; homogeneous and blister-free hardening of coatings.

NOTES 1) Values are indicative averages. See datasheets for actual specifications and measuring methods. 2) Hydroxy Equivalent Weight (gram/equivalent), calculated on delivery form.3) NH equivalent weight (gram/equivalent)n.a. Not applicable

33

UNSATURATED POLYESTER RESINS

ROSKYDAL

Resin name NV 1)

(%) Solvents Viscosity 1)


Acid value 1)


Technical features

STANDARD UNSATURATED POLYESTER RESINSRoskydal 300/1 70 Styrene 0.7 150 APHA 18 1.11 Tough but flexible, very good levelling and high scratch resistance.

Roskydal 500 A 76 Styrene 1.8 100 APHA 15 1.12 High brilliance, little yellowing in darkness, very good levelling properties and scratch resistance, reproducible matt effects.

Roskydal 502 66 Styrene 0.5 150 APHA 16 1.11 High reactivity, very hard, only for thin coats (max. 200g/m²), good resistance to chemicals, solvents and yellowing in light and darkness; scratch resistant.

Roskydal 502 BA 80 Butyl acetate 4.5 100 APHA 18 1.15 For monomer-free coatings in thin layers, good resistance to chemicals, solvents and yellowing in the light and dark, scratch resistant.

Roskydal 550 68 Styrene 1.6 100 APHA 15 1.13 For the elastification of harder Roskydal types, yields permanent flexibility, improves polishing of gloss polyester systems, improves scratch resistance.

Roskydal 620 69 Styrene 0.9 100 APHA 16 1.13 High reactivity, yields hard polymers.

Roskydal E 65 65 Styrene 0.6 150 APHA 12 1.11 Universal flexibilising resin with air-drying properties, also for primers, knifing- and spray fillers.

Roskydal E 70 66 Styrene 1.0 3 Iodine 12 1.12 Soft resin for the flexibilisation of all Roskydal types, especially for wood/furniture coatings.

Roskydal F 8100 75 Styrene 2.8 2 Iodine 20 1.16 Fast curing and low greening; for clear and pigmented sealers with good sandability and good levelling.

AMINE-ACCELERATED UNSATURATED POLYESTER RESINSRoskydal K 14 M 64 Styrene 0.82 15 Iodine 25 1.11 Highest reactivity; yields pale, hard polymers; very good air-drying properties, in combination with

Roskydal K 65 recommended for universal putties.

Roskydal K 27/1 70 Styrene 2.2 10 Iodine 25 1.15 High reactivity, yields pale, hard polymers.

Roskydal K 30 65 Styrene 0.50 15 Iodine 12 1.12 High reactivity, medium hardness, ideal sole binder for car body repair fillers.

Roskydal K 36 62 Styrene 0.40 15 Iodine 10 1.12 High reactivity, medium hardness, ideal sole binder for car body repair fillers.

Roskydal K 40 T 66 Styrene thixotropic n.a. 10 1.12 For highly thixotropic knifing fillers, especially for use in vehicle refinishing, yields polymers of medium flexibility.

Roskydal K 58 61 Styrene 0.50 12 Iodine 20 1.10 High reactivity, yields polymers of medium flexibility, sole binder for all automotive substrates, good adhesion properties on galvanised car panels.

Roskydal K 65 67 Styrene 0.72 10 Iodine 10 1.11 High reactivity, yields highly flexible polymers, sole binder for flexible UP-fillers, but in combination with Roskydal K 14 M also suitable for universal putties.

Roskydal K 68 65 Styrene 0.75 10 Iodine 10 1.11 Medium reactivity, yields highly flexible polymers, ideal sole binder for overbaking resistant fillers.

NOTES 1) Values are indicative averages. See datasheets for actual specifications and measuring methods.

35

Resin name Ratio withßHAA 1)

OverbakeStable

NonBloom

Tribo Cure Temp.(°C)

Typical Tg(°C)

Acid value(mg KOH/g)

Viscosity(P at 200°C)

Technical features

FULL GLOSS SYSTEMS FOR CURE WITH ßHAAExterior

Setapoll SP075 95:5 • • 180 62 33 - 38 20 - 40 For standard bake applications, very good flow and excellent gloss.

Setapoll SP211 95:5 • 160 58 25 - 30 40 - 70 For low bake applications, non tribo version of Setapoll SP255, gas oven stable.

Setapoll SP255 95:5 • • 160 58 25 - 30 40 - 70 For low bake applications, tribo version of Setapoll SP211, gas oven stable.

Setapoll SP278 95:5 • • 180 54 32 - 37 20 - 40 For standard bake applications, good flow and gloss.

Setapoll SP290 95:5 • • 160 59 33 - 38 20 - 50 For low bake applications, very good flow and excellent gloss, reduced bloom, gas oven stable.

Setapoll SP244 96:4 • 180 58 20 - 25 50 - 80 For standard bake applications, very good flow and gloss.

Setapoll SP251 96:4 180 55 22 - 27 35 - 65 For standard bake applications, very good flow and gloss, flow aid at working level.

Setapoll SP271 97:3 • 200 55 16 - 22 65 - 95 Low hardener demand, for standard bake applications, very good flow and gloss, can be used as part of matt pair system with Setapoll SP275.

Setapoll SP291 97:3 • • 200 55 16 - 22 65 - 95 Low hardener demand, for standard bake applications, very good flow and gloss, Tribo version of Setapoll SP271, can be used as part of matt pair system with Setapoll SP295.

Durable

Setapoll SP283 95:5 • • • 200 50 32 - 37 15 - 35 Architectural grade, for standard bake applications, very good flow and gloss, excellent mechanical properties.

Setapoll SP289 95:5 • • • 200 50 32 - 37 10 - 30 Architectural grade, for standard bake applications, exceptional flow and appearance.

Setapoll SP293 95:5 • • 180 55 30 - 35 15 - 35 Architectural grade, for standard bake applications, very good flow and gloss, gas oven stable, reduced bloom.

Setapoll SP300 95:5 • • 180 54 32 - 37 15 - 35 Architectural grade, for standard bake applications, very good flow and gloss.

Setapoll SP281 97:3 • • 200 50 16 - 22 40 - 70 Architectural grade, low hardener demand, for standard bake applications, very good flow and gloss, can be used as part of matt pair system with Setapoll SP285.

Superdurable

Setapoll SP340 95:5 • 200 60 32 - 37 45 - 65 Superdurable grade, for standard bake applications, good flow and gloss, good mechanical aging properties, gas oven stable.

Setapoll SP301 96:4 • 200 60 22 - 27 25 - 50 Superdurable grade, for standard bake applications, very good flow and gloss, can be used as part of matt pair system with Setapoll SP305.

Setapoll SP341 97:3 • 200 59 16 - 22 35 - 65 Superdurable grade, for standard bake applications, very good flow and gloss, can be used as part of matt pair system with Setapoll SP345.

POWDER RESINS

SETAPOLL

NOTES 1) ß-hydroxyalkylamide

37

Resin name Ratio withßHAA 1)

OverbakeStable

NonBloom


Typical Tg(°C)



Technical features

MATT SYSTEMS FOR CURE WITH ßHAAExterior

Setapoll SP238 90:10 200 63 min. 70 20 - 40 For standard bake, can be dry blended with other Setapoll resins for maximum gloss reduction in matt systems and also for special applications.

Setapoll SP275 93:7 • 200 60 46 - 52 25 - 45 For standard bake, very robust system for general metal applications, for use as part of matt pair system with Setapoll SP271.

Setapoll SP295 93:7 • • 200 60 46 - 52 25 - 45 For standard bake, tribo version of Setapoll SP275, for use as part of matt pair system with Setapoll SP291.

Durable

Setapoll SP285 93:7 • • 200 50 46 - 52 10 - 30 Architectural grade, for standard bake, for use as part of matt pair system with Setapoll SP281.

Superdurable

Setapoll SP305 92:8 • 200 61 53 - 58 20 - 45 Superdurable grade, for standard bake, for use as part of matt pair system with Setapoll SP301.

Setapoll SP345 93:7 • 200 64 46 - 52 45 - 65 Superdurable grade, for standard bake, for use as part of matt pair system with Setapoll SP341.

POWDER RESINS

SETAPOLL

Resin name Ratio withEpoxy

OverbakeStable


Typical Tg(°C)



Technical features

SYSTEMS FOR CURE WITH EPOXY RESINSetapoll SP084 50:50 • 180 51 min. 70 18 - 30 For standard bake applications, good flow and excellent gloss.

Setapoll SP143 60:40 • 180 55 50 - 55 15 - 30 For standard bake applications, superior flow and excellent gloss.

Setapoll SP170 60:40 • 160 55 55 - 60 25 - 45 For low bake applications, good flow and excellent gloss.

Setapoll SP125 70:30 • 180 54 30 - 36 45 - 60 For standard bake applications, very good flow and excellent gloss.

Setapoll SP130 70:30 • - 50 30 - 36 20 - 40 Low reactive polyester resin for modifying reactivity of epoxy cured 70:30 systems.

Setapoll SP254 70:30 • 170 54 30 - 36 20 - 45 For standard bake applications, very good flow and excellent gloss. Recommended for matt systems.

Setapoll SP280 70:30 170 54 30 - 36 20 - 45 For standard bake applications, very good flow and excellent gloss. Recommended for matt systems.

Setapoll SP282 70:30 • • 160 50 30 - 36 35 - 65 For low bake applications, excellent flow and gloss.

NOTES 1) ß-hydroxyalkylamide

39

Please feel free to inquire about resins listed in our product brochures for the markets:• Resins for Automotive,

OEM and Plastic Coatings• Resins for Decorative Coatings• Resins for Flooring and Construction

Coatings• Resins for Industrial, Marine

and Protective Coatings• Resins for Industrial Wood Coatings• Resins for Powder Coatings• Resins for Refinish and Commercial

Transportation

Nuplex – February 2014

OUR OTHER PRODUCT

BROCHURES

Globally, Nuplex specialises in the development and manufacture of innovative polymer resins and additives used in surface coatings. Our products serve a wide range of end markets including automotive OEM, vehicle refinish, industrial, marine & protective, decorative paint, industrial wood, flooring and construction. adhesives, inks, paper and textiles industries.

From our manufacturing operations in Europe, Australia, New Zealand, Asia and America, Nuplex sells its products in over 80 countries worldwide. Nuplex’s global manufacturing, sales and research & development network, underpins its unique ability to provide customers the reach and resources of a global chemicals company whilst retaining the flexibility and customer service of a tailored solutions provider.

FOR COATING APPLICATIONS · 1 [email protected] VERSION 02-2014 The Netherlands Synthesebaan 1,...

Documents

Transcript of FOR COATING APPLICATIONS · 1 [email protected] VERSION 02-2014 The Netherlands Synthesebaan 1,...