1 2020 23JUL CV DR NOR FADILA - Home | PEOPLE AT ...

1

CURRICULUM VITAE

PERSONAL DETAILS

Name : NOR FADILA BINTI MOHD. AMIN

Gender : FEMALE

Date of Birth : 28 NOVEMBER 1969

Nationality : MALAYSIAN

Marital Status : MARRIED

Permanent Address

: 19, JALAN SILAT LINCAH 21, BANDAR SELESA JAYA, 81300 JOHOR BAHRU, JOHOR

Correspondence Address

: SCHOOL OF EDUCATION FACULTY OF SOCIAL SCIENCES AND HUMANITIES UNIVERSITI TEKNOLOGI MALAYSIA 81310 JOHOR BAHRU, JOHOR, MALAYSIA

Telephone : +607-553 4396

Mobile : +6019-770 1969

Fax : +607- 553 4895/ 557 7351/ 553 4884

Email : [email protected]

Website : https://people.utm.my/fadila

ID Staff : 7076

Area of Interest : § Technical and Vocational Education § Design and Technology § Curriculum Design and Development § Innovation in Learning and Teaching

ACADEMIC QUALIFICATIONS

2013 : Doctor of Philosopy (Technical and Vocational Education) Universiti Teknologi Malaysia

2006 : Certificate of Education University Technology of Sydney

1999 : Master of Education (Technical and Vocational Education) Universiti Teknologi Malaysia

1992 : Bachelor of Technology with Education (Civil Engineering)

2

Universiti Teknologi Malaysia

AWARD AND HONORS RECEIVED 2019 : GOLD AWARD

Integration of e-Service Learning Platform in Authetic Learning Environment for Computer Network Cabling and Setup New Academia Learning Innovation 2019 (NALI 2019)

2018 : JOHAN Anugerah Pengajaran Transformatif Pengajaran Transformatif: Pentaksiran Alternatif Anugerah Khas YB Menteri Pendidikan Malaysia Reka Bentuk Kurikulum & Penyampaian Inovatif Tahun 2018 (AKRI 2018)

2017 : BRONZE Medal for “Developimh Aspiring Educators : An Innovation Course Framework”, in the 4th International Innovative Practices in Higher Education Expo 2017 (I-PHEX 2017)

2016 : SILVER Award for “Resolving the Conundrum of Superior Performers in Organizations : The Star-Chef Competency Profiling Using the Application of the Rasch Measurement Model”, in Innovative Practices in Education and Industry Exhibition (I-PEINX 2016).

2015 : Vice Chancellor Innovation Award 2015 for the innovation of "Sistem Maklumat Latihan Mengajar", Citra Karisma, 7 June 2015

2014 : SILVER Award for "Sistem Maklumat Latihan Mengajar" in National University Carnival on e-Learning (NUCEL) 2014

2012 : SILVER Medal (Engineering and Technology Category) for Shuttlecock Launcher Project in Novel Research and Innovation Competition (NRIC)

2012 : University Excellent Service Award

2002 : University Excellent Service Award

PROFESSIONAL MEMBERSHIP / QUALIFICATIONS / RECOGNITION

1. Member of the Asian Academic Society for Vocational Education and Training (AASVET). Membership No. : M00006

2. Member of the Malaysia Technical and Vocational Education Association. Membership No. :

V00377 3. Member of the Malaysian Educational Research Association (MERA). Membership No. : O-

0228

3

ADMINISTRATIVE EXPERIENCE University Level 2020 : Position/Employer

April 28 to July 2020 - In the role of Deputy Director Center for Academic and Experiential Learning (CAEL) Institute for Life-Ready Graduate

2017 : Position/Employer Nov 2017 to Apr 2020 – Academic Manager (General Courses), Center for Co-curriculum and Service Learning Office of Undergraduate Study

UNIVERSITY COMMITTEE 2019 - 2021 : Member of the University Curriculum Committee (JKKU)

2019 : Member of Task Force of UTM Life-Ready Graduate (UTM League).

2019 : Member of the Committee of the Development of MOOCs for University

General Courses, Office of Undergraduate Studies

2019 : Spekear Academic Advisory Workshop Office of Undergraduate Studies

2019 : Speaker Sharing Session Programme on the Implementation of Flexible Education in Undergraduate Programmes Office of Undergraduate Studies

2019 : Panel of Judges Sustainable Entrepreneurial Mindset Showcase (SEMS 2.0) 2019 Programme

2019 : Fascilitator Extra-Curricular Experiential Learning (ExCEL) Course School of Chemical and Energy Engineering Faculty of Engineering

2019 : Speaker Briefing of ExCEL Programme Azman Hashim International Bussines School

2019 : Speaker Workshop on ExCEL and e-Portfolio School of Electrical Engineering Faculty of Engineering

4

2019 : Panel of Judges UTM Co-Curriculum Day 2019 Office of Undergraduate Studies

2019 : Panel of Judges The 10th School of Education's Innovation Day Faculty of Social Sciences and Humanities

2018 : Member of the Task Force of the International Postgraduate Colloquium Faculty of Social Sciences & Humanities, UTM – Universitas PGRI Semarang, Indonesia

2018 : Member of the 3rd TVET International Conference Committee (TVETIC 2018), UTM

2017 - 2018 : Member of the Innovation and Commercialisation Committe, Faculty of Education, UTM.

2017 - 2018 : Member of the Technical and Vocational Education and Training Group Research Colloquium Committee, Faculty of Education, UTM.

2016 – 2018 : Member of the Quality Committee, Faculty of Education, UTM.

2016 : Member of the International Service Learning Programme Committee, Faculty of Education, UTM.

2016 : Member of the Service Learning Comittee, Faculty of Education, UTM.

2016 : Secretary of the Practical Training Committee, Faculty of Education, UTM.

2016 : Member of the Curriculum Review Committee Task Force, Faculty of Education, UTM.

2016 : Technical and Vocational Education Postgraduate Programme Coordinator, Faculty of Education, UTM.

2015 : Member of the Task Force of the 11th Malaysia Plan Document Preparation – The construction of building and the provision of equipment for UTM Centre for Student Innovation

2015 : Member of the Practical Training Committee, Faculty of Education, UTM.

2015 : Member of the First Year Experience Programme Committee, Faculty of Education, UTM.

2015 : Member of the Undergraduate Compliance Audit Committee, Faculty of Education, UTM.


5

2014 : Member of the Occupational Health and Safety Committee, Faculty of Education, UTM.

2014 : Member of the Practical Training Committee, Faculty of Education, UTM.

2014 : Member of the Students’ Character Development and Activity Committee, Faculty of Education, UTM.

2014 : Member of the Undergraduate Project Committee, Faculty of Education, UTM.

2014 : Member of the School in Hospital Programme Committee, Faculty of Education, UTM.


2013 – 2014 : Member of the Faculty of Education Website Project Committee, Faculty of Education, UTM.

2013 : Member of the Enhancing Graduate Attribute Project, Faculty of Education, UTM.

2013 : Member of the Faculty of Education UTM Brand Pedagogy, Faculty of Education, UTM.

2013 – 2015 : Member of the Quality Committee, Faculty of Education, UTM.

2012 - 2015 : Member of the Occupational Environment, Safety and Health Committee, Faculty of Education, UTM.

2012 : Fascilitator for the University General Courses TOT Workshop – Innovation, Creativity and Entrepreneurship Cluster, UTM.

2012 : Fascilitator for the Teacher Development Program, Faculty of Education, UTM.

2011 – 2013 : Member of the University Students Innovation Committe, UTM

2011 – 2013 : Member of the Data Management System/Office Automation Programme, Faculty of Education, UTM.

2011 – 2013 : Member of the Basic Training Courses for Trainers Programme, Faculty of Education, UTM.

6

2010 : Interview Panel for the Bachelor’s Degree Programme in Education and Diploma in Education Admissions, Faculty of Education

2009 : Member of the Facility Management Committee, Faculty of Education

2009 : Member of the English Proficiency Enhancement Committee, Faculty of Education

2009 : Coordinator for the purpose of preparing an audit of institution visits (Academic Performance Audit)

2009 : Facilitator for the Programme of How to Get Yourself Employed and Teacher Development, Faculty of Education

2009 : Member of the Occupational Safety and Health Committee, Faculty of Education

2008 : Member of the Vice Chancellor Quality Award Committee, Faculty of Education

2007 : Member of the Undergraduate Programme Curriculum Review Working Committee, Faculty of Education

2002 : Member of ISO 2000 Committee Task Force, Faculty of Education

2002 : Member of Quality Monitoring Committee, Faculty of Education

2002 : Coordinator for the Special Graduating Programme for Teachers (PKPG) for Technical Teacher College, Kuala Lumpur

2001 : Member of Islamic Development Bank Tender Evaluation Committee, Faculty of Education

2001 : Internal Auditor, Faculty of Education

2000 : Coordinator for the Special Graduating Programme for Teachers (PKPG) for Batu Pahat Teacher College

2000 : Coordinator for Faculty Teaching, Faculty of Education

2000 : Member of Technical and Vocational Education Curriculum Review Committee, Faculty of Education

1999 : Member of Smart Faculty Committee, Faculty of Education

1999 : Member of ISO 9000 – Teaching Task Force Group Committee, Faculty of Education

1999 : Member of Task Force for the Preparation of the Vice Chancellor's Quality Award

7

NATIONAL APPOINTMENT/COMMITTEE 2020 : Panel of Reviewer

Jurnal Penyelidikan Pendidikan Guru, Teacher Education DIvision, Ministry of Education

2019 : Member of the Committee of the Curriculum Development for Diploma and Certificate of Digital Marketing, DSK School of Management, DSK Management.

2019 : Panel of Module of Competency and Professionalism of STEM Teachers, Teacher Professionalism Division, Ministry of Education Malaysia

2019 : Programme Advisory Panel Diploma in Construction Technology Tg Puteri Vocational College, Johor Bahru

2019 : Panel of Reviewer Jurnal Penyelidikan Pendidikan Guru, Teacher Education DIvision, Ministry of Education

2019 : Judge Cilik Kreatif Competitiion Tadika Cilik Al Fateh Malaysia

2019 : Speaker of Forum and Workshop of Carnival for Innovation in Teaching and Learning (CiTel 2019), Universiti Pendidikan Sultan Idris

2018 : Member of the KSSM Text Book Evaluator Committee for Civil Engineering Studies, Ministry of Education Malaysia.

2018 : Panel of STEM, Malaysian Education Blueprint 2013 – 2025 Review Laboratory Ministry of Education Malaysia

2018 : Item Development Expert Panels for STEM Teacher Diagnostic Assessment Ministry of Education Malaysia

2017 : Programme Advisory Panel Diploma in Construction Technology Tg Puteri Vocational College, Johor Bahru

2016 : Associate Editor Bulletin of Educational Research, Innovation and Thought (BRIGHT), Universiti Sains Malaysia.

8

2016 : Pemikir Leadership Training Module for Johor State UMNO The Johor State Umno Liaison Body, 15 Feb 2016.

2016 : Item Development Panels Competency Assessment of Teachers’ Pedagogical Skills in the Field of STEM Ministry of Education (MoE), Teacher Education Division, Ministry of Education, 4 October 2016.

2016 : Item Assessment Panels Competency Assessment of Teachers’ Pedagogical Skills in the Field of STEM Ministry of Education (MoE), Teacher Education Division, Ministry of Education, 4 October 2016.

2015 : Speaker, The Sharing Session on the Development of Service Learning Guidelines, 23 June 2015, Universiti Pendidikan Sultan Idris (UPSI).

2015 : Project Advisor, School in Hospital Volunteer Program Phase 2/ Serie 2, June 2015.

2015 : Panel for The National Professor Council Roundtable Discussion on Innovation in Teaching and Learning, 23 November 2015, UTM International Kuala Lumpur.

2014 : Speaker Innovation Week Programme 2014, Kota Tinggi Vocational College, Johor. 17 April 2014.

2001 : Chairman of the Quality Control Committee of the KBSM Textbook for Engineering Drawing Form 4 subject

2000 : Panel for Syllabus Development for the Postgraduate Teacher Education Course

2000 : Judge for the Science and Innovation Competition in conjuction with Pahang State Science and Technology Education Carnival 2000

INTERNATIONAL APPOINTMENT/COMMITTEE 2018 : Keynote Speaker

The 1st International Conference on Education and Social Sciences Research, 6 October 2018 Universitas PGRI Semarang, Indonesia

2018 : Plenary Speaker The 1st International Conference on Community Service Programme, 6 October 2018 Universitas PGRI Semarang, Indonesia

2018 : Invited Speaker

9

International Study Visit Programme 2018 Universitas Negeri Surabaya, Indonesia

2017 : Plenary Speaker The 3rd International Seminar on Education Technology (ISET 2017), 24 May 2017, Universitas Negeri Semarang, Indonesia

2017 : Workshop Speaker Universitas PGRI Semarang Postgraduate Programme in Conjunction with The 3rd International Seminar on Education Technology (ISET 2017), 24 May 2017, Universitas PGRI Semarang, Indonesia

2017 : Committee Member International Conference Applied Counseling and Psychology (ICACP 2017), 7 – 8 Feb 2017, Le Grandeur Palm Resort, Johor, Malaysia

2017 : Supervisor International Teaching Practices Programme in collaboration between Universitas PGRI Semarang and UTM at Sek. Men. Kejuruan Negeri 4 and Sek. Menengah Kejuruan Negeri 7, Semarang, Indonesia. 12 Feb – 11 March 2017.

2017 : Coordinator International Teaching Practices Programme in collabaoration between UTM and Universitas Muhammadiyah Purwokerto, Indonesia, 14 Feb – 14 March 2017.

2016 : Deputy Chair, Technical and Vocational EducationTraining International Conference (TVETIC2016), 17 – 20 Nov 2016, KSL Johor Bahru, Malaysia

2016 : Workshop Speaker “Innovation Ecosystem in TVET” Technical and Vocational EducationTraining International Conference (TVETIC2016), 17 – 20 Nov 2016, KSL Johor Bahru, Malaysia

2016 : Committe Member International Conference on Education and Higher Order Thinking Skills (ICES 2016), 11 – 13 April 2016, Dewan Sultan Iskandar, Universiti Teknologi Malaysia.

2016 : Coordinator, International Teaching Practice Programme Universitas PGRI Semarang, Indonesia, 25 Apr – 20 May 2016.

2016 : Supervisor International Teaching Practices Sit-In Programme Faculty of Education., UTM and Universitas Muhammadiyah Jakarta, Indonesia, 19 Sept – 10 Oct 2016.

10

2015 : Guest Judge The Final Round of the South East Asian Global Innovation Challenges Competition (SEAGIC 2015) organized by the American Chemical Society, Malaysia International Chemical Science Chapter, 4 Nov 2015, Centre for Student Innovation, UTM.

2015 : Speaker Postgraduate Seminar on Sustainability in Higher Educationn, 10 November 2015, Universitas PGRI Semarang, Indonesia.

2015 : Supervisor International Community Services and Field Teaching Practices for Students of Faculty of Mathematics and Science, State University of Makassar, 26 July – 20 August 2015.

2015 : Secretary I The 2nd International Education Postgraduate Seminar (2ndIEPS 2015), 20 – 21 December 2015, Pulai Spring Resort, Johor Bahru, Johor.

2014 : Mentor Lecturer, International Teaching Practice Programme for Students of Yogyakarta State University, 28 June – 20 July 2014.

2014 : Advisor International Community Services and Teaching Practices for Students of Faculty of Mathematics and Science, State University of Makassar, 23 August – 18 September 2014.

2014 : Member of The Development of International Sustainable Cultural Village in Khleang Sbek, Cambodia Council. Nov 2014 – Nov 2016.

2014 : Committee Member International Seminar on Technical and Vocational Education (TVEIS 2014), 25 – 26 Aug 2014, Universiti Teknologi Malaysia.

2013 : Editor for the 2nd International Seminar on Quality and Affordable Education (ISQAE 2013), 7 – 10 October 2013, KSL Hotel & Resort Johor Bahru, Johor, Malaysia.

1999 : Officer for the International Solar Cycle Team, Faculty of Education

RESEARCH ACTIVITIES

11

Project Leader 1. Pembangunan Modul Latihan Kemahiran Vokasional bagi Peningkatan Kebolehpasaran

Pekerjaan dalam Kalangan Belia di Negeri Johor. Funded by : Universiti Teknologi Malaysia. Feb 2018 – Jan 2020. (Vot. PY/2017/02040), Allocation RM30,000)

2. The 21st Century and Green Job Competency Framework for Elderly Caregivers in

Malaysia. Funded by : Ministry of Higher Education. Aug 2017 – Aug 2019 (Vot. PY/2017/01180, Allocation RM44,096)

3. Pelaksanaan Internship dalam Kerja Kursus bagi Program Sarjana Muda. Funded by :

Universiti Teknologi Malaysia July 2016 - July 2018. (Vot. 4J245, Allocation RM10,000)

4. Kualiti Pengurusan Penyiasatan Jenayah PDRM. Funded by : Ministry of Home Affairs February 2016 - November 2016. (Vot. 4B251, Allocation RM131,105.04)

5. Petunjuk Kesediaan Pembelajaran Arah Diri dalam kalangan Pelajar Pendidikan Teknik

dan Vokasional di Malaysia. Funded by : Universiti Teknologi Malaysia. April 2011 - Sept 2012. (Vot. 04J86, Allocation RM40,000)

Co-Researcher 1. Employability Skills Framework to Meet the Industrial Revolution 4.0 (IR 4.0) Working

Environment. Funded by Universiti Teknologi Malaysia. January 2020 – June 2022. (Vot. 20H77, Allocation RM 70,000).

2. Intelligent Programable Robotic Arm Manipulator Educational Rig. Funded by Universiti

Teknologi Malaysia. January 2020 – June 2022. (Vot. 00L38, Allocation RM 65,000). 3. A Framework of IR4.0 Integrations into TVET in Malaysia. Funded by Universiti Teknologi

Malaysia. November 2019 – April 2022. (Vot. 18J55, Allocation RM 15,000).

4. Design of Interactive Multimedia Learning Content for Subject Sirah, Ibadah and Arabic Language (KAFA). Funded by EDESS Education Development and Solutions Sdn. Bhd. June 2019 – July 2020. (Vot. 4C319, Allocation RM 6,300).

5. Pengesahan Psikometrik Bagi Pembangunan Instrumen Kepimpinan Pentadbir Universiti

Teknologi Malaysia. Funded by Universiti Teknologi Malaysia. November 2019 – November 2021. (Vot. 4J476, Allocation RM10,000).

6. Pemerkasaan Sistem Pentaksiran Sumatif Sekolah Agama Kerajaan Negeri Johor.

Funded by : Universiti Teknologi Malaysia. February 2018 – January 2020. (Vot. 19H24, Allocation RM 30,000)

7. Incorporating Nondestructive Testing (NDT) Theory and Technical Skills into Welding

Inspection Curriculum. Funded by: Universiti Teknologi Malaysia. February 2018 – April 2019. (Vot 15J09, Allocation RM10,000)

8. Service Learning Programme: New Emerging Technologies For 21st Century Learning:

SMK MUTIARA RINI & SMK SETA. Funded by: Universiti Teknologi Malaysia. February – May 2017. (Vot 4X373, Allocation RM7,080)

12

9. Penilaian Perancangan Pengajaran Bagi Subjek Kokurikulum Utm Berdasarkan Konsep Constructive Alignment Dan Outcome Based Education. Funded by : Universiti Teknologi Malaysia. July 2017 – September 2018. (Vot 14J73, Allocation RM10,000)

10. Kaji Selidik Keberkesanan Pelan Strategik 2016-2020 Majlis Perbandaran Sepang Bagi

Tahun 2017. Funded by Majlis Perbandaran Sepang. (Vot 4C180, Allocation RM10,000) 11. Pembangunan Kurikulum Prasekolah Berteraskan Penggunaan Media Digital dan

Pendekatan Design Thinking. Funded by Industry Kumpulan Niaga Al-Fateh Sdn. Bhd. March 2017 – February 2020. (Vot. 4C135, Allocation RM30,000)

12. Competency Framework of Quality Workforce Towards Sustainable Professional

Development for Culinary Profession at Hotels and Convention Centers in Malaysia. Funded by : Universiti Teknologi Malaysia. October 2017 – December 2018. (Vot 03K10, Allocation RM10,000)

13. International Service Learning 'Menuju Sejuta Impian Bersama'. Funded by Universitas

Sriwijaya, Palembang, Indonesia 8 - 15 March 2016. (Vot. 4X212, Allocation RM5,000)

14. Development of Rasch-Calibrated Item Pools in Computer Adaptive Testing (CAT) for Enhancing Reasoning Skills in High School Science and Mathematics. Funded by : Ministry of Higher Education. November 2015 – October 2017. (Vot. 4X218, Allocation RM99,000)

15. Modul Sukarelawan Bagi Pembelajaran Pelajar Sekolah dalam Hospital. Funded by :

Universiti Teknologi Malaysia. June 2016 – May 2017. (Vot 4J163, Allocation RM15,000) 16. Conceptual Business Model for Sustainable Online Tutoring for Secondary Education in

Malaysia. Funded by : Ministry of Education, August 2016 – July 2018. (Vot 4F843, Allocation RM50,000)

17. Program Pendidikan Kesihatan Menangani Stress dalam kalangan Care-Giver. Funded by

: Universiti Teknologi Malaysia May 2015 - Oct 2016. (Vot.09H60, Allocation RM30,000)

18. Permasalahan Pengajaran dan Pembelajaran Sekolah Memandu di Malaysia dalam Proses Penguasaan Kemahiran Memandu. Funded by Fundamental Research Grant Scheme (FRGS) July 2014 - June 2016. (Vot. 4F567, Allocation RM68,200)

19. Procrastination Among University Teknologi Malaysia Undergraduate Students and Its

Affects to the Academic Performance. Funded by Universiti Teknologi Malaysia April 2014 - March 2015. (Vot.09J56, Allocation RM20,000)

20. Kepimpinan Glokal Penghulu Model 3KI Johor Darul Ta'zim. Funded by Universiti

Teknologi Malaysia April 2014 - March 2015. (Vot. 0825, Allocation RM23,000)

21. Penghayatan Jemaah Terhadap Khutbah Jumaat Negeri Johor Darul Ta'zim. Funded by Johor State Religious Department Dec 2014 - March 2015. (Vot.4B175, Allocation RM66,478)

13

22. Formulasi Interpretasi Skor Ujian Menggunakan Perbandingan Pendekatan Teori Ujian Klasik dan Teori Respon Item. Funded by Fundamental Research Grant Scheme (FRGS) Dec 2013 - Dec 2015. (Vot.4F381 , Allocation RM81,500)

23. Capacity Building Towards Innovative Ecopshere in Higher Education Institutions in

Malaysia. Funded by National Higher Education Research Institute Aug 2013 - July 2014. (Allocation RM220,000)

24. Penerokaan Adaptasi Pentaksiran Akhlak dalam Sistem Penggredan Pencapaian Pelajar

di Institusi Pengajian Tinggi Awam. Funded by Exploratory Reseach Grant Scheme (ERGS) June 2012 - Dec 2014. (Vot.4L057, Allocation RM75,000)

25. Pembinaan dan Pengesahan Instrumen Pengujian Pemahaman Konsep Inovasi. Funded

by Universiti Teknologi Malaysia May 2012 - April 2013. (Vot.05J24, Allocation RM12,099)

26. Exploratory Study in Developing a Framework to Observe, Identify and Capturing Behaviour Whilst Designer engaged in Sketching Toward Creative and Innovative Designing. Funded by Exploratory Research Grant Scheme 2014 – 2015. (Vot.4L018, Allocation RM75,000)

27. Pola Kemahiran Visualisasi dan Gaya Belajar dalam kalangan Pelajar Kejuruteraan di

UTM. Funded by Universiti Teknologi Malaysia Sept 2009 - Aug 2010. (Vot. 77942, Allocation RM10,000)

28. The Strategic Management in Technical and Vocational Education Program of Malaysia

Higher Institution. Funded by SEAMEO VOCTECH/Netherland Government July 2008 - June 2009. (Allocation USD2,000)

29. Kerangka Pegangan dan Amalan Penyeliaan Pengajaran Pensyarah Pembimbing

Pendidikan Teknikal dan Vokasional/Kejuruteraan dalam Praktikum Latihan Mengajar. Funded by Fundamental Research Grant Scheme (FRGS) Dec 2007 - Aug 2008. (Vot.78261, Allocation RM59,918)

30. Characterizing Design for Web-Based Adult Learning System. Funded by Fundamental

Research Grant Scheme (FRGS) Mac 2007 - Mac 2009. (Vot.78113, Allocation RM25,000)

31. Design and Develop Special Equipments for Cerebral Palsy. (Vot. 71030)

CONSULTANCY PROJECTS Member :

1. The 3rd Technical and Vocational Education and Training International Conference, Amount : RM 98,025.00. (Ref GTIM 2016.02/56 Jld 1 (20); Vot : GTIM 56).

2. Full-Bright Hays Group Protect Abroad : Study Tour, Amount : RM 41,577.20 (Ref GTIM

2016.02/45Jld 1 (2); Vot : GTIM 45).

14

3. Program Pemerkasaan Asnaf bagi Tahun 2016. Unit Pembangunan Asnaf, Majlis Agama Islam Negeri Johor, Amount : RM134,000 from Majlis Agama Islam Negeri Johor (Ref.UT.KORP/1.11 Jld. 13 (90), 2016)

4. Electronic Product Development Course (Malaysian Skills Certification Level 4) Module

B05-04001 (Microcntroller Configuration) K2, Amount : RM35,000 from Ministry of Education, Malaysia (Ref.UT.KORP/1.11 Jld. 8 (13)

5. Research Methodology and Instrument Construction Training for IKBN Graduate

Employability. Amount : RM35,000 from Ministry of Youth and Sports. (29 Sept – 1 Oct 2013)

6. The Concept of Nine Technical and Thrity One Vocational Textbook. Amount : RM19,000

from Ministry of Education (Vot. 63353, June 2002 – October 2003)

INTELECTUAL PROPERTIES Copyright

1. Interactive and Fun Learning Tool or Learning Basic Tamil Words. IP/CR/2018/1098. 2. Innovative BES Board for Basic Accounting. IP/CR/2018/1091. 3. HVAM FlashcardsfFor Enhancing Students Recognition of Letters and Their Sounds.

IP/CR/2018/1079. 4. Innovative Language Board Games - Speak Out Loud. IP/CR/2018/1078. 5. The Electronic Sentence Building ESB. IP/CR/2018/1090 6. Learning Module of Phases Of Moon Based on 3D Simulation Model. IP/CR/2017/1140. 7. Innovative Electrical Model to Teach Visualize Electrical Circuit. IP/CR/2018/0343. 8. Produk Inovasi Bagi Mengatasi Masalah Kemahiran Motor Dalam Kalangan Pelajar

Autisma Di Sekolah Rendah. IP/CR/2017/0385. 9. Innovation Product to Overcome Understanding in Mathematical Concept for Pre-School

Students. IP/CR/2017/0382. 10. Innovation of Penmanship for Young Learners of Age 4-6 Years Old. IP/CR/2017/1138. 11. Innovation in Learning and Teaching Mendelian Genetic. IP/CR/2016/2157. 12. An innovative product for improving the English language skills and motor skills usage

among kindergarten students. IP/CR/2017/0384

15

13. Produk Inovasi bagi Membantu Fokus Murid Semasa Sesi Pembelajaran Abjad dalam Bahasa Inggeris di Prasekolah. IP/CR/2017/0383.

14. Produk Inovasi bagi Mengatasi Masalah Pembelajaran Kemahiran Membaca Mengeja dan

Menbunyikan Suku Kata di Tahun 2 Sekolah Rendah. IP/CR/2017/0426. 15. Produk Inovasi bagi Mengatasi Masalah Pembelajaran Topik Pembahagian bagi

Matematik Tahun 4. IP/CR/2017/0425. 16. Produk Inovasi Bagi Pembelajaran Topik Pembundaran Bagi Matematik Tingkatan 4

Sekolah Menengah. IP/CR/2017/0422. 17. Produk Inovasi bagi Membantu Mengatasi Masalah Pembelajaran Operasi Tolak bagi

Topik Pecahan Matematik Tahun 5 di Sekolah Jenis Kebangsaan Tamil. IP/CR/2017/0427. 18. Innovative Product Constructing Sentences Cards-Cs Cards for Difficulties in Constructing

English Sentences Form for Year 3 And Based on Game-Based Learning Vygotsky Social Constructivism Theory. IP/CR/2017/0423.

19. Projek “Kit Merangka Karangan” UTM.J14.01/27.13/1 Jld104 (89). 20. Projek Inovasi Model Pencernaan Makanan UTM.J14.01/27.13/1 Jld 105 (14) 21. Projek Inovasi Model Bulatan Penyelesaian Masalah Matematik Berayat.

UTM.J14.01/27.13/1 Jld104 (79). 22. Projek Inovasi Model Bentuk dan Ruang. UTM.J14.01/27.13/1 Jld 104 (73). 23. Block Puzzle. UTM.J14.01/27.13/1 Jld104 (72). 24. Projek Inovasi Pengajaran dan Pembelajaran Ekonomi Asas (Skim Perbankan Islam) –

Wheel of Islamic Banking Kit. UTM.J14.01/27.13/1 Jld104(70). 25. Projek Inovasi Pengajaran dan Pembelajaran Matematik Berkonsepkan Koordinat

Bricknet. UTM.J14.01/27.13/1 Jld104(69). 26. Projek Inovasi Permainan Eksplorasi Pendidikan Moral Tahun 3 KSSR.

UTM.J14.01/27.13/1 Jld104 (71.). 27. Projek Inovasi Pengajaran dan Pembelajaran Perbendaharaan Kata dalam Bahasa

Inggeris “Words Tower” (UTM.J14.01/27.13/1 Jld 104(69). TEACHING ACTIVITIES Postgraduate

No. Course Code Course Session/Semester

16

1. MPPU1003 Innovation in Learning anf Teaching 20192020/2










11. MPPV1313 Models of Teaching in Technical and Vocational Education

20142015/1

12. MPK2053 Current Issues in Technical and Vocational Education

20132014/2

13. MPK1033 Supervision in Technical and Vocational Education

20032004/1

14. MPK1043 Foundations of Technical and Vocational Education

20012002/1

Undergraduate

No. Course Code Course Semester

1. SPPE2622 Industrial Design 20192020/2

2. SPPE2032 Basic Design 20192020/2

3. SPPE1102 Wood Technology Practices i 20192020/1

4. SPPL1002 Wood Technology 20192020/1

5. SPPA3001 Micro Teaching 20192020/1

6. UKQA2082/ UKQF2072

Wood Craft 20192020/1

7. SPPE1102 Wood Technology Practices i 20182019/2


9. UKQA2082 Wood Craft 20182019/2

17

10. SPPE2212 Brickwork Practices 20182019/1

11. SPPE2622 Industrial Design 20182019/1

12. SPPE3112 Building Services 20182019/1

13. SPPE4372 Construction and Site Management 2 20182019/1

14. SPPL4412 Invention 20172018/2


16. SPPE1102 Woodworking Practices 20172018/2

17. UKQA2082 Woodcrafts 20172018/2

18. SPPA2001 Microteaching 20172018/1

19. UKQA2082 Woodcrafts 20172018/1

20. SPPE3102 Domestic Plumbing Works 20172018/1

21. SPPE3392 Plastering and Finishing Works 20172018/1

22. SPPE2272 Foundation and Concrete Works 20162017/2

23. SPPE2272 Foundation and Concrete Works 20162017/1


25. SPPE 2052 Basic Furniture Making 20152016/2

26. SPPL4403 Innovation 20152016/1

27. SPPE1322 Construction Materials 20142015/2



30. SPPE3032 Building Drawing 20142015/1


32. SPPE2032 Basic Innovation 20132014/1


34. SPPE2052 Basic Furniture Making 20132014/1

35. UKQU2202 Innovation and Creativity 20132014/1

36. UKQU2202 Innovation and Creativity 20132014/2


18

38. SPPE1622 Construction Technology 20122013/2

39. SPPE1022 Engineering Drawing 1 20122013/2





44. SPPE1102 Wood Practices 20112012/2

45. SPPE1622 Construction Technology 20112012/2



48. SPPE1322 Construction Materials 20112012/1


50. SPE2402 Computer Aided Design 20102011/1

51. SPE2032 Basic Innovation 20092010/2

52. SPE2622 Industrial Design 20092010/2

53. SPL1002 Wood Technology 20092010/1



56. SPE2402 Computer Aided Design 20082009/2

57. LPT1003 Engineering Drawing 20082009/2

58. SPL1002 Wood Technology 20082009/1



61. LPA1002 Basic Engineering Drawing 20072008/2

62. SPL2402 Computer Aided Design 20072008/2

63. LPT1003 Engineering Drawing 20072008/2


65. SPK3402 Architectural Drawing 20032004/1

19

66. SPK3033 Workshop Safety 20022003/2

67. SPK4012 Innovation II 20022003/2

68. SPK4002 Innovation 20022003/2


70. SPH4002 Innovation 20022003/1

71. SPK3032 Basic Innovation 20022003/1


73. SPK2013 Evaluation and Assessment in TVE 20012002/2

74. SPK1042 Construction Technology 20012002/2

75. SPA2000 Micro Teaching 20012002/2


77. SPK3002 Advanced Engineering Drawing 20012002/1

78. SPK2013 Evaluation and Assessment in TVE 20002001/2

79. SPK4002 Innovation 20002001/2

80. SPK1002 Basic Engineering Drawing 20002001/2

81. SPK3042 Trade Practices II 20002001/1

82. SPK2001 Engineering Drawing I 20002001/1


84. SPK1002 Basic Engineering Drawing 19992000/2

85. SPK4012 Innovation II 19992000/2




89. SPK3033 Workshop Safety 19961997/2


91. SPK4002 Innovation 19961997/1

92. SPK1013 Basic Trades 19961997/1


20

SUPERVISION PhD Student

No. Name Research Title Year/Status Role of Supervision

1. Olojuolawe Sunday Rufus PPP163030

Employability Skills Framework for Electrical Technology Students in Colleges of Education in Nigeria

2016-2019/ Completed

Main Supervisor

2. Crystal Joan Peter PP123063

Sustainability Leadership Framework for Malaysian Polytechnics

2012 - 2019/ Completed

Main Supervisor

3. Shirka Kassam Jwasshaka PPP173117

A Framework of Employability Skills for Building Construction Graduates of Polytechnics in Nigeria

2017/Active Main Supervisor

4. Nor Hasmida binti Mohd. Nor PPP153043

Competencies Framework of Gerontology and Geriatric Caregivers in Malaysia


5. Nurfazwin binti Ab Rasid PPP173045

Industry 4.0 Job Skills Framework for Civil Engineering Students in Public University

2017/Active

6. Nornazira binti Suhairom PP123023

Chef's Competency Model for Superior Work Performance in Culinary Profession

2013 – 2016/Completed

Co-Supervisor

7. Rohaiza binti Zakaria PP113206

Sketching to Encourage Creativity in Designing

2012 – 2020 / Completed

Co-Supervisor

Master of Education (by Research)


21

1. Ahmad Shobah bin Mohd Isa MPP193011

Kesediaan Kemahiran Pelajar Teknologi Pembinaan Dalam Memenuhi Keperluan Revolusi Industri 4.0


2. Zainab binti Yahya Arif MPP193021

Kompetensi Pengajaran Berdasarkan Kemahiran Abad Ke-21 Dalam Kalangan Pensyarah Teknologi Pembinaan Kolej Vokasional


3. Muhamad Hafidz Bin Mohd Yusof MPP183036

Kualiti Penyampaian Pengajaran Kursus Amali Teknologi Elektrik dalam Kalangan Pensyarah Kolej Vokasional Negeri Johor

2018/Active Co-Supervisor

4. Noraisyah binti Che Derashid MPP143001

Instrument to Measure the Level of Innovation Among UTM Undergraduate Students


Co-Supervisor

Master of Education (Mixed Mode)


1. Zahrina binti Ahmad MPP162025

Kompetensi Tenaga Pengajar Seni Kulinari Melaksanakan Outcome-Based Education dalam Pengajaran di Kolej Vokasional

2016-2019/ Completed

Main Supervisor

2. Fauzi bin Toed MPP142026

Penerapan Kemahiran Insaniah dalam Kalangan Pelajar Program Binaan Bangunan di Kolej Vokasional Negeri Johor


Main Supervisor

3. Haslina binti Sulfani MP121136

Implikasi Transformasi Pendidikan Vokasional Terhadap Kursus Perkhidmatan Asuhan

2012 – 2015/ Completed

Main Supervisor

22

Kanak-kanak di Kolej Vokasional

Master of Education (Taught Course)


1. Nurfazwin binti Ab Rashid Tahap Kemahiran Generik Hijau dalam Kalangan Pelajar Kejuruteraan Awam

2017/ Completed

Main Supervisor

2. Wan Nurul Nadia binti Wan Sallehudin

Kaedah Penerapan Kemahiran Berfikir Aras Tinggi Dalam Pengajaran Bagi Guru Reka Bentuk dan Teknologi di Daerah Skudai, Johor

2017/Completed Main Supervisor

3. Siti Khadijah binti Rahmad Tahap Kemahiran Generik Hijau dalam Kalangan Pelajar Pendidikan Teknik dan Vokasional di Universiti Teknologi Malaysia

2013 – 2015/ Completed

Main Supervisor

4. Emeliana binti Elias Ciri-ciri Inovasi Pelajar Pendidikan Teknik dan Vokasional

2013/ Completed

Main Supervisor

5. Nasriah binti Sudin Penglibatan Pelajar dalam Program Formal Pendidikan dan Latihan Teknik dan Vokasional di Institusi Awam di Malaysia Mengikut International Standard Classification of Education

2010/ Completed

Main Supervisor

6. Syarina binti Ramli Model Kemahiran Employability bagi Pelajar Fakulti Pendidikan, UTM

2009/ Completed

Main Supervisor

23

Undergraduate Student 1. Wan Nur Fatiha binti Wan Mohd. Ridzuwan. “Kemahiran Penyelidikan Dalam Kalangan

Pelajar Tahun Akhir Sekolah Pendidikan Dalam Projek Sarjana Muda”. 2020.

2. Norfarhana binti Mizan. " Kemahiran Pemikiran Reka Bentuk Dalam Kalangan Guru Bidang Science, Technology, Engineering, Mathematic (STEM) di Sekolah Menengah Daerah Johor Bahru." 2019.

3. Muhamad Norsyukri Alim bin Abd. Kadir. " M-Aplikasi GOSKETCHUP Berasaskan Sistem Android dalam Pembelajaran Pembinaan Tingkap bagi Subjek SPPE 3032 Lukisan Bangunan." 2019.

4. Anisah binti Rahman, “Penerapan Kemahiran Employability dalam Kalangan Pelajar Diploma Teknologi Pembinaan Di Kolej Vokasional. Negeri Sembilan.” 2018.

5. Noorhazlim binti Che Abdul Razak, “Pembinaan Modul Pembelajaran Kendiri Kekuda Bumbung Keluli dan Penutup Bumbung.” 2018.

6. Franklin anak Bala,"Aplikasi M-pembelajaran Berasaskan Sistem Android Bertajuk Unjuran Ortografik Tahun Dua Kolej Vokasional." 2015 - 2016.

7. Mohammad Khairil Ibraq bin Mohamad Badi, "Modul Pembelajaran Kendiri Vokasional Kerja Melepa, Bahan Sanitari, Saliran dan Pembentungan bagi Kursus Teknologi Pembinaan." 2014 - 2015.

8. Nor Faralia binti Ngadirin, "Modul Pembelajaran Kendiri Bertajuk Penyediaan Tapak Bina bagi Pelajar Jurusan Teknologi Pembinaan." 2013 - 2014.

9. Muhammad Faathir bin Basar, " Penggunaan Enapcemar Sungai dalam Pembuatan Bata." 2012 - 2013.

10. Saidatun Nor binti Awang, "Pembangunan Instrumen Kemahiran Berfikir Kreatif dalam kalangan Pelajar Pendidikan Teknik dan Vokasional." 2011 - 2012.

11. Norsalmi binti Ramli, "Pembangunan Instrumen Penyelesaian Masalah Kreatif Pelajar Pendidikan Teknik dan Vokasional (CIPSTVE)." 2011 - 2012.

12. Mashitoh binti Mahadi, "Pembangunan Instrumen Gaya Penyelesaian Masalah dalam kalangan Pelajar Pendidikan Teknik dan Vokasional (PILs)." 2011 - 2012.

13. Nor Nasarah binti Kamal, "Pembangunan Instrumen Kemahiran Employabiliti Pelajar Pendidikan Teknik dan Vokasional (i-tvees)." 2011 - 2012.

14. Saiful Amri bin Mohd. Ali, "Membangunkan Mesin Shuttlecock Launcher untuk Latihan Pukulan Smash dalam Permainan Badminton (Sistem Pelancar)." 2011 – 2012.

15. Wan Mohd. Elyas bin Wan Deraman, "Membangunkan Mesin Pelancar Bulu Tangkis untuk Latihan Pukulan Smash dalam Sukan Badminton (Reka Bentuk dan Bahan)." 2011 - 2012.

16. Sazari bin Sapawi, "Membangunkan Mesin Pelancar Bulu Tangkis untuk Latihan Latih Tubi Pukulan Smash dalam Sukan Badminton (Sistem Feeder)." 2011 – 2012.

17. Azimah binti Mohd. Ajis, "Penguasaan Bahasa Inggeris dalam kalangan Pelajar SPH di UTM Skudai Johor." 2008 - 2009.

18. Toh Yin Leei, "Pembangunan Perisian E-Kamus Visual Berasaskan Web bagi Topik Struktur Bangunan dalam Kursus Asas Teknologi Kejuruteraan." 2009 - 2010.

24

19. Mohd. Samsulnahar bin Mohd. Yusof, "Membina B-ramp untuk Sukan Boccia Kategori BC3." 2009 - 2010.

20. Chia Peggie, "Pembangunan Perisian E-Glossary Berasaskan Web bagi Pembinaan." 2009 - 2010.

21. Mazlisa Banu binti Mohd. Faruk, "Pembinaan Modul Pembelajaran Kendiri Tajuk Peralatan Tangan dan Tanggam dalam Kerja Kayu bagi Kursus Teknologi Kayu." 2009 - 2010.

22. Zulkifli bin Josti, "Pelaksanaan Mata Pelajaran Kemahiran Hidup di Sekolah Rendah di Daerah Sabak Bernam." 2008 - 2009.

23. Emy Mastura binti Zulkifli, "Pembangunan Perisian Multimedia Berkonsepkan Teori Konstruktivisme bagi Lukisan Tangen." 2008 - 2009.

24. Joelymond bin Raymund, "Perlaksanaan Pengajaran Mata Pelajaran Kemahiran Hidup di Sekolah Menengah Daerah Beaufort, Sabah." 2008 - 2009.

25. Chiew Kai Wan, "Persepsi Guru Terhadap Penggunaan Perisian Multimedia dalam Proses Pengajaran dan Pembelajaran Mata Pelajaran Kemahiran Hidup Sekolah Jenis Kebangsaan Cina." 2008 - 2009.

26. Azman bin Ripin, "Kesediaan Kerja dikalangan Pelajar Fakulti Kejuruteraan Elektrik Universiti Teknologi Malaysia." 2008 - 2009.

27. Adibah binti Abd. Rahim, "Tahap Penguasaan Bahasa Inggeris sebahgai Persediaan untuk Kerjaya dalam kalangan Pelajar Pendidikan Teknikal dan Kejuruteraan." 2008 - 2009.

28. Lely Khalilah binti Abd. Kamar, "Pembangunan Perisian Multimedia Berkonsepkan Teori Konstruktivisme bagi Lukisan Persilangan." 2008 - 2009.

29. Ain Aisyarina binti Hamadin, "Kesediaan Pelajar Pendidikan Teknikal dan Kejuruteraan Universiti Teknologi Malaysia untuk Mengajar Mata Pelajaran Kemahiran Hidup dalam Bahasa Inggeris." 2008 - 2009

30. Malisa Aini Noor binti A. Malek, "Kesediaan Pelajar Pendidikan Teknikal dan Kejuruteraan dalam Menceburi Bidang Keusahawanan." 2008 - 2009.

31. Dzufi Iszura binti Ispawi, "Faktor-faktor yang Mempengaruhi Pemilihan Bidang Keusahawanan sebagai Kerjaya dalam kalangan Pelajar Pendidikan Teknikal dan Vokasional." 2007 - 2008.

32. Nik Mohd. Amir bin Nik Ab. Aziz, "Faktor yang Mempengaruhi Kreativiti Pelajar Tingkatan 4 dalam Mata Pelajaran Reka Cipta." 2007 - 2008.

33. Mohd. Fairul bin Mohamad Nawai, "Amalan Penyelesaian Masalah Secara Kreatif di dalam mata Pelajaran Reka Cipta di kalangan Pelajar SPH." 2007 - 2008.

34. Subri bin Mohd. Nor, "Tinjauan Terhadap Guru di Sekolah Menengah Teknik Negeri Johor Terhadap Penerapan Kemahiran Generik dalam Proses Pengajaran dan Pembelajaran Mata Pelajaran Kejuruteraan." 2007 - 2008.

35. Mazyla binti Mokhtar, "Aplikasi Teknologi Maklumat dan Komunikasi (ICT) dalam Meningkatkan Pengajaran dan Pembelajaran oleh Guru Teknikal (Awan, Elektrik dan Jentera) Sekolah Menengah Teknik di Negeri Selangor." 2003 - 2004.

25

36. Lim Yee Chian, "Faktor-faktor yang mempengaruhi Kepuasan Kerja di kalangan Guru Teknikal di Sekolah Menengah Teknik : Satu Kajian di Negeri Kedah Darul Aman." 2003 - 2004.

37. Lim Ai Hui, "Keupayaan Mengajar Guru-guru Kemahiran Hidup dalam Bahagian Teras bagi Sukatan Pelajaran Baru Tingkatan Satu : Satu Tinjauan di Sekolah-sekolah Menengah Kawasan Skudai." 2003 - 2004.

38. Nur Rabbuaah binti Haji Ismail, "Faktor-faktor yang Mendorong Pertukaran Bidang oleh Graduan Kejuruteraan ke dalam Bidang Pendidikan ke atas Pelajar-pelajar Sarjana Muda Teknologi serta Pendidikan di Universiti Teknologi Malaysia." 2003 - 2004.

39. Kua Wee Hong, "Cabaran Pelajar -pelajar Aliran Vokasional di SMT Naik Taraf di Negeri Johor." 2002 - 2003.

40. Mimi Mohaffyza binti Mohamad, "Faktor-faktor yang Mempengaruhi Suri Rumah Menyertai Industri Kampung di Mulim Sri Gading, Batu Pahat, Johor." 2002 - 2003.

41. Mohamad Azam bin Hussain, "Peluang Kerjaya Pelajar-pelajar Kursus Kemahiran dan Teknikal di Kolej Yayasan Pelajaran Johor." 2002 - 2003.

42. Hazlina binti Harun, "Persepsi Pelajar Orang Asli tentang Pendidikan Teknik dan Vokasional : Satu Tinjauan di Daerah Temerloh, Pahang." 2002 - 2003.

43. Norsuhainy binti Ibrahim, "Tahap Pengetahuan dan Kemahiran Pengajar Pendidikan Teknik dan Vokasional bagi Orang Kurang Upaya dalam Pelaksanaan Pengajaran dan Pembelajaran di Kelas-kelas Khas." 2002 - 2003.

44. Nornazalishah binti Ahmad Lias, "Tinjauan terhadap Kemahiran Teknik dan Vokasional di Institusi Latihan Perindustrian di Negeri Johor bagi Melahirkan Pelatih yang memenuhi Keperluan Industri." 2002 - 2003.

45. Chin Wee Siong, "Persepsi Pelatih terhadap Latihan Kemahiran di Pusat Latihan Teknologi Tinggi (ADTEC) di Negeri Johor." 2002 - 2003.

46. Saidi bin Said, "Persepsi Pelajar Perempuan Tingkatan 4 Aliran Vokasional Terhadap latihan Amali Kerja Bata di Sekolah Menengah Teknik di Negeri Pahang." 2001 - 2002.

47. Zaini bin Che Lah, "Persepsi Guru Pembimbing Terhadap Guru Pelatih Semasa Menjalani Latihan Mengajar di Sekolah Menengah Teknik di Negeri Pahang." 2001 - 2002.

48. Thayalan a/l Supramani, "Persepsi Guru-guru Pelatih UTM terhadap Peranan Penyelia Bersekutu di Sekolah Semasa Menjalani Latihan Mengajar." 2001 - 2002.

49. Wan Mohd. Hanif bin Wan Hamzah, "Satu Tinjauan Tentang Pengaruh Faktor Minat, Sikap dan Persekitaran dalam Pembelajaran Teknologi Automotif di kalangan Pelajar Tingkatan Empat di Tiga Buah Sekolah Menengah Teknik di Negeri Kelantan." 2001 - 2002.

50. Yasin bin Yusoff, "Tinjauan Terhadap Motivasi, Sahsiah dan Sikap Pelajar Tingkatan Empat Aliran Vokasional di SMV Naik Taraf kepada SMT di Kelantan." 2001 - 2002.

51. Yahya bin Akelah, "Kajian ke atas Pelaksanaan Pendekatan Pembelajaran Masteri dalam Aliran Vokasional di SMT Negeri Sembilan." 2001 - 2002.

52. Zalina binti Muhammad Zainudin, "Persepsi Tenaga Pengajar Vokasional Terhadap Program Vokasional di Pusat Serenti di Negeri Johor Darul Takzim." 2001 - 2002.

26

53. Foong Mang Kit, "Faktor-faktor Yang Mempengaruhi Aliran Teknik dan Vokasional di kalangan Pelajar Kaum Cina : Satu Tinjauan di Sekolah Akademik di Daerah Skudai." 2000 - 2001.

54. Nurhaslinda binti Hadli, "Kajian Terhadap Kefahaman Konsep bagi Pembinaan Geometri serta Teknik Pembelajaran yang Diamalkan dalam Lukisan Geometri di kalangan Pelajar Aliran Vokasional di SMT Daerah Johor Bahru." 2000 - 2001.

55. Fauziah binti Mohd. Noor, "Satu Tinjauan Kesesuaian Mata Pelajaran Pengkhususan Kejuruteraan Awam Terhdap Pelajar Sarjana Muda Teknologi Serta Pendidikan (Kejuruteraan Awam) Sebagai Persediaan Mangajar Mata Pelajaran Pengajaian Kejuruteraan Awam di Sekoalh Menengah Teknik." 2000 - 2001.

56. Karpagam a/p Gurusamy, "Suatu Kajian Terhadap Tahap Celik Komputer di kalangan Mahasiswa Tahun Satu Fakulti Pendidikan, Unversiti Teknologi Malaysia." 2000 - 2001.

57. Mohd. Khaizalamin bin Kadir, "Tahap Kesediaan Guru Pelatih Lelaki mengajar Mata Pelajaran Elektif Kemahiran Hidup Ekonomi Rumah Tangga." 2000 - 2001.

58. Azidi binti Sarudin, "Tahap Kesediaan Pelajar Tahun 3STP UTM Terhadap Latihan Mengajar." 1999 - 2000.

59. Che Rejuna bin Che Lah, "Satu Tinjauan ke atas Amalan Kebersihan di kalangan Pengusaha Kedai Makan di dalam Kawasan Pentadbiran Majlis Daerah Kota Bharu, Kelantan." 1999 - 2000.

60. Nor Suhailah binti Jusah, "Pengaruh Kafe Siber Terhadap Pembentukan Sahsiah Remaja Mas Kini : Satu Tinjauan." 1999 - 2000.

61. Md. Zamsuri bin Harjin, "Rekabentuk Acuan Pasir Berukir." 1999 - 2000.

62. Samsul Bahri bin Abd. Hamid, "Kajian Rekabentuk Alat Penyegar Makanan." 1999 - 2000.

63. Junainah binti Tarif, "Faktor-faktor yang Mempengaruhi Pencapaian Pelajar Melayu dalam Mata Pelajaran Prinsip Akaun di Daerah Kulai." 1999 - 2000.

64. Ismail bin Tamby Chik, "Penilaian Diri Pelajar Kejuruteraan Awam Universiti Teknologi Malaysia, Skudai Terhadap Ciri-ciri Seorang Jurutera Awam Menurut Kehendak Institusi Jurutera Malaysia." 1999 - 2000.

POSTGRADUATE EXAMINATION/VIVA UTM Students/Viva-Voce

1. Chairman of the Med Viva for Yuzamri Yusoff, 7 March 2017. 2. Co-Chairman of the PhD Viva Panels for Zhang Yong, 4 December 2016. 3. Co-Chairman of the PhD Viva Panels for Sada Adamu Maigari, 25 September 2016. 4. Co-Chairman of the PhD Viva Panels for Siti Dahlia Said, 13 September 2016. 5. Co-Chairman of the PhD Viva Panels for Zulkifli, 24 December 2013.

MEd Internal Examiner

1. Nurashikin binti Jubri, “Kesedaran Pemakaian Bra Sukan dan Corak Pergerakan Payu Dara dalam kalangan Atlet Remaja.” Master of Philosophy, May 2015.

27

2. Dian Dianti binti Jumaat, “Hubungan Kepercayaan Penyeliaan dengan Gaya Kepimpinan Guru Penolong Kanan Terhadap Guru Kemahiran Hidup Sekolah Rendah di Pasir Gudang”, Master of Education, Dec 2013.

3. Jamaliah binti Mohd. Jamal, “Kesediaan Guru Terhadap Pelaksanaan Penataran

Pentaksiran Berasaskan Sekolah Kemahiran Hidup Bersepadu Tingkatan Satu” Master of Education, Mei 2013.

PUBLICATIONS JOURNAL ISI Journal :

1. Suhairom, N., Musta’amal, A. H., Amin, N. F. M., Kamin, Y., & Wahid, N. H. A. (2019). Quality culinary workforce competencies for sustainable career development among culinary professionals. International Journal of Hospitality Management, 81, 205-220.

2. Yusri bin Kamin, Muhammad Sukri bin Saud, Noraffandy Yahaya, Waleed Mugahed Al-

Rahmi, Azlan Abdul latib, Nor Fadila Amin, and Damon Cartledge (2018), “Comparative Analysis of Students Perception on the Relevance of Diploma Certificate in Automotive Engineering to the Industry”, IEEE Access, 6, 79129 – 79137. (IF = 3.557).

3. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib, Haslina Sulfani

Mohd. Hanapiah and Nor Hasmida Mohd. Noor (2018). “The Aftermath of Transformation of Malaysia Vocational Education System on Early Childhood Studies in Vocational Colleges”, Advanced Science Letters, 24(4), 2527 – 2531.

4. Peter, C. J., Nor Fadila Amin, Adibah Abdul Latif/, Mahyuddin Arsat and Aede Hatib

Musta’amal @ Jamal (2018), “The Status of Sustainability Performance in malaysian Polytechnics”, The Turkish Online Journal of Design Art and Communication, September, 1656 – 1665.

5. Lokman Mohd. Tahir, Narinah A. Samah, Wahid Omar, Shahrin Mohammad, Adibah Abdul

latif, Sanitah Mohd. Yusof, Nor Fadila Mohd. Amin, Mohd. Zolkifli Abdul Hamid, Mahyuddin Arsat and Aede Hatib Musta’amal @ Jamal (2018), “Re-examine Malaysian HEIs Graduates’ Employability: Comparing Perspectives from Graduates and Employees”, The Turkish Online Journal of Design Art and Communication, September, 1666 – 1685.

6. Ibnatul Jalilah Yusof, Adibah Abdul Latif, Nor Fadila Amin, Aisamuddin Mat Hassan,

Mahyuddin Arsat, Aede Hatib Musta’amal @ Jamal and Noor Azean Atan (2018), “Measuring Research Literacy : Development of Research Literacy Test”, The Turkish Online Journal of Design Art and Communication, September, 1649 - 1655.

7. Mahyuddin Arsat, Nor Fadila Mohd. Amin, Adibah Abdul latif, Hasnah Mohamed, Aede

Hatib Musta’amal @ Jamal, Rashidah Arsat and Sharifah Maryam Syed Azman (2018), “Incorporation of Sustainability and Computational Thinking in Teaching Innovation : A Study

28

on Students’s Learning Experience”, The Turkish Online Journal of Design Art and Communication, September, 1686 – 1692.

8. Mohd. Azwan Md. Yasim, Aede Hatib Musta’amal @ Jamal, Lokman Mohd. Tahir, Norzanah

Rosmin, Mohd. Fa’iz Ahmad, Sanitah Mohd. Yusof, Nornazira Suhairom, Nor Fadila Mohd. Amin, Adibah Abdul Latif and Mahyuddin Arsat (2018), “A Framework for Assessing the Work Environment Risks Amongs Electrician in Johor”, The Turkish Online Journal of Design Art and Communication, September, 1707 – 1711.

9. Muhammad Muhammad Inti, Azlan Abdul Latib, Shola Francis Bakare, Yusri Kamin, Nor

Fadila Amin and Muhammad Sukri Saud (2018), “Pedagogical Approaches Required for Fostering Interpersonal Skills among Mechanical Engineering Technology Students’”, Advanced Science Letters, 24(4), 2854 - 2857.

10. Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul latib and Nor Fadila Amin (2018),

“Setup, Maintenance and Troubleshooting of Computer System Skills for Technical and Vocational Education Teachers”, Advanced Science Letters, 24(4), 2734 - 2737.

11. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Amin, and Noor Khairul Anuar

Johari (2014), “The Development of Competency Model and Instrument for Competency Measurement: The Research Methods”, Proceedia – Social and Behavioral Sciences, 152, 1300 – 1308.

12. Mohd. Safarin bin Nordin, Nor Fadila binti Mohd. Amin, Kamalularifin bin Subari and

Mohd. Zolkifli bin Abdul Hamid (2013), “Visualization Skills and Learning Style Patterns among Engineering Students at Universiti Teknologi Malaysia”, Proceedia – Social and Behavioral Sciences, 93, 1769 – 1775.

Scopus Journal :

1. Nor Fadila Amin, Adibah Abdul Latif, Mahyuddin Arsat, Nornazirah Suhairom, Nurul Farhana Jumaat and Mohd. Erfy Ismail. (2020). “The Implementation of the Internship as a Coursework in Teaching and Learning Vocational Education”. Journal of Technical Education and Training, 12 (1), 82-90.

2. Sunday Rufus Olojuolawe, Nor Fadila bt Mohd. Amin, Adibah Abdul Latif, Habibu Aminu

Sani, Haruna Garba Wase. (2019). "Structural Classification of Employability Skills Hierarchy using Rasch Analysis Model". International Journal of Recent Technology and Engineering, 8(3), 3581-3591.

3. Shirka Kassam Jwasshaka and Nor Fadila Mohd. Amin (2019). "Enhancing Self-Reliant of

Students in Technical and Vocational Skills Through Work-Based Learning for 4th Industrial Revolution; Review of Nigerian Higher Institutions." International Journal of Recent Technology and Engineering, 8 (1C2), 594-598.

4. Onyilo, I. R., Arsat, M. B., Akor, T. S., Latif, A. A., & Amin, N. F. M. (2019). "Sustainable

Development and Sustainability in Engineering Education in Nigeria". International Journal of Engineering and Advanced Technology, 8 (5C), 515 - 520.

29

5. Ismail, Mohd Erfy, Suhaizal Hashim, Noorazman Abd Samad, Norhasyimah Hamzah, Saiful Hadi Masran, Khairul Azhar Mat Daud, Nor Fadila Amin, Mohd Ali Samsudin, and Nurzatulshima Kamarudin. (2019). "Factors That Influence Students’learning: An Observation On Vocational College Students". Journal of Technical Education and Training, 11(1), 93 - 99.

6. Muhdi, Suwarno Widodo, Achmad Buchori, Ririn Ambarini and Nor Fadila Amin (2018).

“Factors Influencing the Success of Teaching of Universitas PGRI Semarang in International PPL Programme in Malaysia”. International Journal of Engineering & Technology, 7 (3.30), 517 – 522.

7. Samsoko, Yasinta Indrianti, Aqeel Khan and Nor Fadila Amin (2018). “An Evidence-Based

Model of Teacher Engagement in Indonesia : Indonesian Teacher Engagement Index (ITEI)”. International Journal of Engineering & Technology, 7 (3.30), 297 – 300.

8. Achmad Buchori, Muhdi, Ririn Ambarini, Suwarno Widodo and Nor Fadila Amin (2018).

The Development of Experiential Learning Model to Increase the Capacity of Teaching of UTM Students in Semarang Indonesian Schools”. International Journal of Engineering & Technology, 7 (3.30), 523 – 528.

9. Bakare Shola F, Azlan Abdul Latib, Yusri Kamin, Muhammad Sukri Saud and Nor Fadila

Amin (2018). “Instructional Competencies Required by Technical Teachers for Effective Performance in Technical Drawing”. International Journal of Engineering & Technology, 7 (2.29), 909 – 911.

10. Mahyuddin Arsat, Nor Fadila Amin, Adibah Abdul Latif, Baharuddin Aris, Rashidah Arsat

dan Haffis Mahmood (2018). “Sustainability and Innovation Teacher Education Programme”. International Journal of Pure and Applied Mathematics, 118 (24), 1 – 13.

11. Nor Fadila Amin, Adibah Abdul Latif, Mahyuddin Arsat and Nornazira Suhairom (2017).

“Measuring Changing of Problem Solving Ability Using Rasch Measurement Model”. Advanced Science Letters, 23 (1), 117 – 120.

12. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Latib and Nurul Ida Mohd.

Azmi (2017). “International Teaching Practice in Technical and Vocational Education.” Advanced Science Letters, 23 (1), 647 – 650.

13. Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib and Nor Fadila Amin (2017). “A

Conceptual Model of Scenario Based Learning for Developing Higher Order Thinking Skills in Engineering." Advanced Science Letters, 23(1), 194-196.

14. Mahyuddin Arsat, Nor Fadila Amin, Adibah Abdul Latif and Rashidah Arsat (2017).

“Integrating Sustainability in a Student-Centered Learning Environment for Engineering Education”. Advanced Science Letters, 23 (1), 651 - 655.

15. Yusri Bin Kamin, Azlan Abdul Latib, Nor Fadila Amin, and Muhammad Sukri Saud (2017).

“Technical Skills Competency Level Among Students at Vocational Colleges in Malaysia.” Advanced Science Letters, 23 (1), 573 - 576.

30

16. Azlan Abdul Latib, Nor Fadila Amin, Muhammad Sukri Saud, and Yusri Kamin (2017). “Impact of a Service Learning Program to the University and the Community.” Advanced Science Letters, 23 (1), 596 - 599.

17. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Amin, Dayana Farzeeha Ali and

Umawathy Techanamurthy (2017). “A Framework of Culinary-Specific Competencies for Sustainable Professional Development in Gastronomic Tourism.” International Information Institute (Tokyo). Information 19, no. 10B (2016): 4683.

18. Nor Aisyah Che Derasid, Aede Hatib Musta’amal. Nor Fadila Amin, and Abdul Rashid

Husain. “Content Validity for Innovation Level of UTM Undergarduate Students: A Quantitative Approach.” Man In India, 96(1-2), 477-488

19. Adibah Abdul Latif, Nor Fadila Amin and Wilfredo Herrera Libunao (2016). "Multiple Choice

Item Analysis Using Classical Test Theory and Rasch Measurement Model." Man in India, 19 (1-2), 173 - 181.

20. Nornazira, S., Aede, H. M. A., Fadila, M. A. N., Mahani, M., & Husna, A. W. N. (2015)." A Needs Assessment for the Development of a Competency Model for Culinary Professionals." Advanced Science Letters, 21(6), 1662-1665.

21. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Amin and Noor Khairul Anuar

Johari. “A Preliminary Study of the Needs for the Development of Competency Measurement Instrument for Malaysian Chefs”. Pertanika Journal of Social Sciences & Humanities, 23.

22. Nazira Suhairom, Aede Hatib Musta'amal, Nor Fadila Mohd. Amin and Noor Khairul Anuar

Johari (2014). "The Development of Competency Model and Instrument for Competency Measurement : The Research Methods." Procedia-Social and Behavioral Sciences, 152, 1300 - 1308. (ISI indexed). http://dx.doi.org/10.1016/j.sbspro.2014.09.367

23. Nor Fadila Amin, Muhamad Sukri Saud, Yahya Buntat and Adibah Abdul latif (2013). "The

Application of Rasch measurement Model in Measuring Change in Students Self-Directed Learning Readiness." Advanced Science Letters. 19 (22), 3736 - 3738. (SCOPUS indexed). http://dx.doi.org/10.1166/asl.2013.5242

24. Muhammad Sukri Saud, Mohd. Hizwan Mohd. Hisham, Mohd. Safarin Nordin, Nor Fadila

Amin and Yahya Buntat (2013). "Cooperative Problem Based Learning (CPBL) Model : A Technical Review." Advanced Science Letters. 19 (22), 3637 - 3638. (SCOPUS indexed). http://dx.doi.org/10.1166/asl.2013.5227

Non-Refereed Journal

1. Olojuolawe, S. R., Amin, Nor Fadila Amin, & Adewumi, M. G. (2019). "IR4. 0: The Challenges for Graduate Employability in Nigeria". Management Research Spectrum, 9(1), 1-5.

2. Olojuolawe, S. R., Nor Fadila Amin., & Latif, A. A. (2019). "Soft Skills Needed by

Electrical Technology Students for 21st Century Jobs". International Journal of Entrepreneurial Research, 2(3), 14-21

31

3. Nurfazwin Ab Rasid & Nor Fadila Amin. (2019). " Industry 4.0 Civil Engineer Job Skills

Required by Employers In Malaysia". Jurnal Kemanusiaan, 17(1-S), 28-31.

4. Olojuolawe, S. R., Amin & Nor Fadila Amin (2019). " Determination of Employability Skills Required by Electrical Technology Students in Colleges of Education in Nigeria", Internation Journal of Engineering Education, 1(1), 57-66.

5. Shirka Kassam Jwasshaka, Nor Fadila Mohd. Amin and Gimba Dogara (2018), “Self-

Reliance Through Innovation and Entrepreneurship Competency of Technical/Engineering Polytechnics Students in Nigeria”, Jurnal Pendidikan Teknologi dan Kejuruan, 24 (2), 185 – 191.

6. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Mohd. Amin, Muhammad Khair

Nordin and Dayana Farzeeha Ali (2016). “Quality indicators in the field of culinary professions in Malaysia - a method of developing competency profiling through self- assessment.” The Online Journal for Technical and Vocational Education and Training in Asia, 7.

7. Adibah Abdul Latif, Mohd. Shafry Mohd. Rahim, Nor Fadila Mohd. Amin and Crystal Joan

Peter (2016). “Kesedaran Sosial dan Penglibatan Mahasiswa dalam Program Khidmat Masyarakat.” Jurnal Pemikir Pendidikan, 7, 89 – 100.

8. Asnul Dahar Minghat, Nor Fadila Amin, Ruhizan M. Yasin and Ramlee Mustapha (2014).

"Pembinaan Indikator Kelestarian Pendidikan Teknikal dan Vokasional Sekolah Menengah Harian Melalui Kajian Delphi." Sains Humanika, 2(4).

9. Saud, M. S., Rajuddin, M. R., Ismail, S., Nordin, M. S., Minghat, S. D., Subari, K., Amin,

N. F. & Arsat, M. (2010). "ICT Application in Vocational and Technical Education and Training (TVET) Onstitutions in malaysia. " SEAVERN Journals, 2(1).

10. Rajuddin, M. R., Ibrahim, Z., Ismail, S., Udin, A., Abdul Latib, A. and Mohd. Amin, N.F.

(2008). "The Expectation of the Small and Medium Enterprises in Malaysia." SEAVERN Journal. 1 (1).

11. Nor Fadila Amin & Widad Othman (1999), "Persepsi Guru Terhadap Cabaran

Pelaksanaan Mata Pelajaran Elektif KBSM", Jurnal Penyelidikan Pendidikan, 1(1), 15 - 28. Book (Text)

1. Corriena Abdul Talib, Zakiah Mohamad Ashari, Nor Fadila Amin, Hamdan Said, Farhana

Diana Deris, Sanitah Mohd. Yusof, Zaleha Ismail, Baharin Abu, Noor Dayana Abdul Halim, Najua Shuhada Ahmad Alhassora, Hadijah Jaffri, Osama K. S. Haniya, Wang Meng, Wang Zhe, Ahmad Shahrin Ramli, Hassan Aliyu, Intan Bidayu Mohd. Rafi, Roslizam Hassan, Mohd Firdaus Maskan, Muhammad Babagana, Mohd. Zulkhairi Mohd. Azam (2018).”A Systematic Review on Literature Review in Educational Research”, Johor Bahru : School of Education, UTM.

32

2. Mohd. Shuisma Mohd. Amail, Bahrain Abu, Rubita Sudirman, Lim Cheng Song, Fauzan Khairi Che Harun, Maheza Irma Mohamad Salim, Nor Fadila Mohd. Amin, Nor Bahiah Ahmad, Zainuddin Abu Bakar and Mahyuddin Arsat (2016). High Impact Educational Practices (HEIPs). In Rose Alinda Alias and Baharuddin Aris (Eds). A Guide to New Academia Learning Innovation (1st edition). pp. 63 – 79, ISBN 978-967-0194-71-4.

Book Chapter

1. Widad Othman, Nor Fadila Mohd. Amin, Halijah Ibrahim and Muhammad Sukri Saud (2008). "Tahap Kesediaan Arah Diri Pelajar Dewasa dan Reka Bentuk Scaffolding dalam Pembelajaran Reka Cipta Secara Online." In ICT Dalam Pendidikan Teknik dan Vokasional. pp. 99 - 114. ISBN 978-983-52-0513-2.

Classified/Technical Report

1. Abdul Rashid Hussein, Aede Hatib Musta’amal, Nor Fadila Amin, Mohd. Azhar Abd. Hamid, Abd. Rahman Tamuri, Norma Alias, Mohd. Bakri Bakar, Hairudin Abdul Majid, Azurah A Samah and Normal Jusoh (2015). “Innovation Competition : Lighting, Improving Community & Creative Souvenir : Report 2015”. UTM Centre of Student Innovation, Johor Bahru.

Proceedings/Conference (International)

1. Arsat, Mahyuddin, Nor Fadila Amin, Adibah Abdul Latif, Yusri Kamin, Nornazira Suhairom, Nur Husna Abd Wahid, R. Arsat, Z. A. Arsat, and Azmi Al Bahij . (2019). "Four Key Dimensions to Characterise Sustainability Courses in Higher Education". In Proceedings of Educational Initiatives Research Colloquium 2019, 49 - 54.

2. Yashotha Subramaniam, Nurul Farhana Jumaat and Nor Fadila Amin (2018). “Acquisition and Communication Skills”, Proceeding of New Academia Learning Innovation 2018, September, 125 – 127.

3. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib, Haslina Sulfani Mohd. Hanapiah and Nor Hasmida Mohd. Noor, “The Aftermath of Transformation of Malaysia Vocational Education System on Early Childhood Studies in Vocational Colleges.” 2017 2nd Advanced Researchon Business, management and Humanities (ARBUHUM 2017). Oct 10 – 12, Patong Resort Hotel, Phuket, Thailand.

4. Yusri bin Kamin, Azlan Abdul Latib, Nor Fadila Amin, Muhammad Sukri Saud and Adnan Ahmad, “Work-based Learning: Employer Perspective towards the Automotive Industry.” 2017 2nd Advanced Researchon Business, management and Humanities (ARBUHUM 2017). Oct 10 – 12, Patong Resort Hotel, Phuket, Thailand.

5. Muhammad Muhammad Inti, Azlan Abdul latib, Shola Francis Bakare, Yusri Kamin and Nor Fadila Amin. “Pedagogical Approaches Required for Fostering Interpersonal Skills among Mechanical Engineering Technology Students.” 2017 2nd Advanced Researchon Business, management and Humanities (ARBUHUM 2017). Oct 10 – 12, Patong Resort Hotel, Phuket, Thailand.

6. Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib and Nor Fadila Amin, “Setup, Maintenance and Troubleshooting of Computer System Skills for Technical and Vocational

33

Education Teachers.” 2017 2nd Advanced Researchon Business, management and Humanities (ARBUHUM 2017). Oct 10 – 12, Patong Resort Hotel, Phuket, Thailand.

7. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib, Adibah Abdul Latif and Haslina Sulfani Mohd. Hanapiah, “Implications of Malaysian Technical and Vocational Education Transformation on the Implementations of Early Childhood Studies in Vocational Colleges.” Asia International Multidisciplinary Conference (AIMC 2017). May 1 - 2, Universiti Teknologi Malaysia.

8. Yusri Bin Kamin, Azlan Abdul Latib, Nor Fadila Amin and Muhammad Sukri Saud, “What Employers says about Work-Based Learning.” Asia International Multidisciplinary Conference (AIMC 2017). May 1 - 2, Universiti Teknologi Malaysia.

9. Franklin Bala, Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Mahyuddin Arsat and Adibah Abdul Latif, “M-Note Application Based on Android System in Learning Orthographic Projections in Vocational Colleges. ” International Symposium on Innovation Education and Technology (ISIET 2017). May 11-12, Asia Airport Hotel, Bangkok, Thailand.

10. Mahyuddin Arsat, Nor Fadila Amin, Adibah Abdul Latif and Hasnah Mohamed, “Impact of Sustainable Design and Computational Thinking Towards Students’ Learning Experience.” International Symposium on Innovation Education and Technology (ISIET 2017). May 11-12, Asia Airport Hotel, Bangkok, Thailand.

11. Yusri Kamin, Muhammad Sukri Saud, Nor Fadila Amin and Asnul Dahar Minghat, “Pedagogy Practices between Australia’s TAFE abd Malaysia’s Community College : Lecturer Views.” International Symposium on Innovation Education and Technology (ISIET 2017). May 11-12, Asia Airport Hotel, Bangkok, Thailand.

12. Nurzalina binti Hashim, Muhammad Sukti Saud, Yusri Kamin and Nor Fadila Amin. “Developing Students’ Higher Order Thingking Skills (HOTS)in the Classroom for Design and Technology.” International Symposium on Innovation Education and Technology (ISIET 2017). May 11-12, Asia Airport Hotel, Bangkok, Thailand.

13. Nor Hasmida Mohd. Nor, Nor Fadila Amin, Adibah Abdul Latif and Mahyuddin Arsat (2017). “Competencies Framework for Elderly Caregivers in Malaysia”. International Conference on Aplied Psychology and Counseling (ICACP-2017). Feb. 8-9, Le Grandeur Palm Resort, Johor Bahru, Johor.

14. Adibah Abdul Latif, Mohd. Tajuddin Ninggal, Mashayekhi, Nor Fadila Amin and Mahyuddin Arsat (2017). “Developing Hierarchical of Mental Health Based on Homesickness : Item Response Theory Approach”. International Conference on Aplied Psychology and Caounseling (ICACP-2017). Feb. 8-9, Le Grandeur Palm Resort, Johor Bahru, Johor.

15. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Amin and Arasinah Khamis (2016). “Resolving the Conundrum of Superior Performers in Organizations: Competency”. Innovative Practices in Education and Industry Exhibition 2016. March 14. Universiti Teknologi Malaysia, Skudai.

16. Adibah Abdul Latif, Suheibah Sobaki, Ibnatul Jalilah Yusof and Nor Fadila Amin (2016). “Kicking Out the Items: Discrimination Index and Item Fit Analysis Approaches”. International Conference On Education High Order Thinking Skills 2016 (ICES HOTS 2016). April 11 – 13, Universiti Teknologi Malaysia, Skudai.

34

17. Nor Fadila Amin, Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib and Nurul Ida Mohd. Azmi (2016). “International Teaching Practice in Technical and Vocational Education”. 2016 Advanced Research on Business, Management and Humanities (ARBUHUM2016). March 15 – 17, Bandung, Indonesia.

18. Nor Fadila Amin, Adibah Abdul Latif, Mahyuddin Arsat and Nornazira Suhairom (2016). “Measuring Changing of Problem Solving Ability Using Rasch Measurement Model”. 2016 Advanced Research on Business, Management and Humanities (ARBUHUM2016). March 15 – 17, Bandung, Indonesia.

19. Yusri Kamin, Azlan Abdul Latib Nor Fadila Amin and Muhammad Sukri Saud (2016). “Technical Skills Competency Level among Students at Vocational Colleges in Malaysia.” 2016 Advanced Research on Business, Management and Humanities (ARBUHUM2016). March 15 – 17, Bandung, Indonesia.

20. Muhammad Sukri Saud, Yusri Kamin, Azlan Abdul Latib and Nor Fadila Amin (2016). “A Conceptual Model of Scenario Based Learning for Developing Hots in Engineering Education”. 2016 Advanced Research on Business, Management and Humanities (ARBUHUM2016). March 15 – 17, Bandung, Indonesia.

21. Azlan Abdul Latib, Nor Fadila Amin, Muhammad Sukri Saud and Yusri Kamin (2016). “Impact of a Service Learning Program to the University and the Community”. 2016 Advanced Research on Business, Management and Humanities (ARBUHUM2016). March 15 – 17, Bandung, Indonesia.

22. Mahyuddin Arsat, Nor Fadila Amin, Adibah Abdul Latif and Rashidah Arsat (2016). “Integrating Sustainability in a Student-Centered Learning Environment for Engineering”. 2016 Advanced Research on Business, Management and Humanities (ARBUHUM2016). March 15 – 17, Bandung, Indonesia.

23. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Mohd. Amin, Dayana Farzeeha Ali and Umawathy Techanamurthy (2016). “A Framework of Culinary-Specific Competencies for Sustainable Professional Development in Gastronomic Tourism.” 2016 1st International Conference on Information in Business and Technology. November 26 – 28, Melaka : MALTESAS.

24. Crystal Joan Peter, Wilfredo Herrera Libunao, Nor Fadila Amin, Adibah Abdul Latif and Mahyuddin Arsat (2016).” Preliminary Research on Sustainable Development Integration in Malaysian University”. Technical And Vocational Education & Training International Conference 2016 (TVETIC 2016). November 18 – 20, KSL Hotel and Resort , Johor Bahru.

25. Nadiah Yusof, Mahyuddin Arsat, Nor Fadila Amin, and Adibah Abdul Latif (2016). “Malaysia's Model for Sustainable Campus”. Technical And Vocational Education & Training International Conference 2016 (TVETIC 2016). November 18 – 20, KSL Hotel and Resort , Johor Bahru.

26. Nor Fadila Amin, Adibah, Abdul Latif, Wilfredo Herrera Libunao, Sarimah Ismail, Mahyuddin Arsat and Nornazira Suhairom (2015). "The Application of Rasch Measurement Model in Measuring Changes of Students' Perceptions on Their Problem Solving Ability." 1st International Conference of Educational Studies (ICES2015). June 3 - 4, Pulai Spring Resort, Johor Bahru, Johor.

35

27. Leong Ting Chee, Nor Fadila Amin, Adibah Abdul Latif and Siti Aisyah Muhammad (2015). "Development of Teaching and Learning Module to Enhance Creativity of Preschoolers. " 1st International Conference of Educational Studies (ICES2015). June 3 - 4, Pulai Spring Resort, Johor Bahru, Johor.

28. Adibah Abdul Latif, Ibnatul Jalilah Yusof, Nor Fadila Mohd. Amin and Wilfredo Herrera Libunao (2015). "Score Interpretation Using Classical Test Theory and Item Response Theory." 1st International Conference of Educational Studies (ICES2015). June 3 - 4, Pulai Spring Resort, Johor Bahru, Johor.

29. Nor Aisyah Che Derasid, Aede Hatib Musta'amal , Nor Fadila Amin and Abdul Rashid Hussain (2015). "Content Validity for Innovation Level of UTM undergraduate Students : A QUalitative Approach." 1st International Conference of Educational Studies (ICES2015). June 3 - 4, Pulai Spring Resort, Johor Bahru, Johor.

30. Nornazira Suhairom, Aede Hatib Musta’amal, Nor Fadila Mohd. Amin and Adibah Abdul Latif (2015). “Reliability and Validity Evidence of Instrument Measuring Competencies for Superior Work Performance”. Proceedings of Pacific Rim Objective Measurement Symposium (PROMS) 2015 Conference. Aug 20 – 24, Singapore : Springer, 323 – 338.

31. Nornazira Suhairom, Aede Hatib Musta'amal, Nor Fadila Mohd. Amin and Noor Khairul Anuar Johari (2014). "The Needs for the Development of Instrument for Measuring Culinary Competencies Among Malaysian Chefs". The 3rd International Conference on Humanities and Social Sciences (ICHSS2014). June 3 - 5, Kuala Lumpur Convention Centre.

32. Nornazira binti Suhairom, Aede bin Musta’amal and Nor Fadila binti Mohd. Amin (2014). “Validity and Reliability of Instrument Measuring Culinary Competencies : The Rasch Measurement Model.” Proceedings of the 1st International Postgraduate Seminar 2014. 23 – 24 November. Johor Bahru : Faculty of Education, UTM, 1 – 5.

33. Mashitoh Mahadi, Nor Fadila Mohd. Amin, Adibah Abdul Latif, Aede Musta'amal, Sarimah Ismail, Mohd. Safarin Nordin and Mohd. Najib Ghaffar (2013). “Pembangunan Instrumen Gaya Penyelesaian Masalah dalam Kalangan Pelajar Pendidikan”. Proceedings of the 2nd International Seminar on Quality and Affordable Education (ISQAE2013). Oct 7 – 10. Johor Bahru, Johor, 500 – 505.

34. Kamalularifin Subari, Maliani Mihamad, Nor Fadila Mohd. Amin, Asnul Dahar Minghat, Sarimah Ismail and Yusri Kamin (2013). "Meninjau Kemahiran Insaniah Pelatih Institut Latihan Perindustrian (ILP) dalam Kerjaya. " Proceedings of the 2nd International Seminar on Quality and Affordable Education (ISQAE2013). Oct 7 – 10. Johor Bahru, Johor, 40 – 44.

35. Sarimah Ismail, Wan Zulkhairi Zakaria and Nor Fadila Amin (2013). "Struktur Kurikulum Program Diploma Pendidikan Lepasan Ijazah Pendidikan Teknikal dan Vokasional. " Proceedings of the 2nd International Seminar on Quality and Affordable Education (ISQAE2013). Oct 7 - 10, Johor Bahru, Johor, 482 – 490.

36. Aede Hatib Musta'amal, Norzanah Rosmin, Nor Fadila Mohd. Amin and Yahya Buntat (2013). "Rekacipta : Ke Arah Pemupukan Budaya Kreatif dan Inovatif." Proceedings of the 2nd International Seminar on Quality and Affordable Education (ISQAE2013). Oct 7 - 10, Johor Bahru, Johor, 229 - 233

37. Mohd. Safarin bin Nordin, Nor Fadila binti Mohd. Amin, Kamalularifin bin Subari and Mohd. Zolkifli bin Abdul Hamid (2012). "Visualization Skills and Learning Style Patterns

36

Among Engineering Students at Universiti Teknologi Malaysia." World Conference on Learning, Teaching and Administration (WCLTA 2012), Oct 28 - 30, University of Barcelona, Barcelona, Spain.

38. Adibah Abdul Latif, Zairul Nur Deana Md. Desa, Mohd. Najib Ghaffar and Nor Fadila Amin (2011). "Development and Validation of Moral Assessment Instrument for Higher Education Students." International Conference on Measurement and Evaluation in Education (ICMEE2011). Oct 10 - 12, Univesiti Sains Malaysia, Penang.

39. Wilfredo Herrera Libunao, Adibah Abdul Latif, Nor Fadila Mohd. Amin and Dayang Hjh

Tiawa Abd. Hamid (2011). "Assessing the Utilization of Research Findings in technical and Vocational Education Policy Making in Malaysia." International Conference on Measurement and Evaluation in Education (ICMEE2011). Oct 10 - 12, Univesiti Sains Malaysia, Penang.

40. Nor Fadila Mohd. Amin and Muhammad Sukri Saud (2010). "e-Product Design : Learning

Design in Web-based Learning Environment." ." International Conference on VTET Research and Networking. June 23 - 24, Brunei Darussalam.

41. Muhammad Sukri Saud, Muhammad Rashid Rakuddin, Sarimah Ismail, Mohd. Safarin Nordin, Asnul Dahar Minghat, Kamalulariffin Subari, Nor Fadila Mohd. Amin, Mohd. Zulkifli Abdul Hamid & Mahyuddin Arsat (2010). "ICT Application in Vocational and Technical Education anfd Training (TVET) Institutions in malaysia." International Conference on VTET Research and Networking. June 23 - 24, Brunei Darussalam.

42. Nor Fadila Amin, Muhammad Sukri Saud, Sarimah Ismail and Widad Othman (2007). "eProductDesign : A New Perspective of Teaching and Learning Product Design for Adult." The 2007 International Conference on e-Commerce, eAdministration, e-Society and e-Education (e-CASE2007). Aug 15 - 17, Hong Kong.

43. Sarimah Ismail, Muhammad Sukri Saud, Nor Fadila Mohd. Amin and Mohd. Rizal Mohd. Said (2007). "Customer Satisfaction Model of Malaysian Malay Restaurants." The 8th International Joint World Cultural Tourism Conference. Nov 16 - 18, Busan, South Korea.

44. Widad Othman, Muhammad SUkri Saud and Nor Fadila Amin (2006). "How Can Web-based :earning System Enhances Adults Learning in Product Design." 6th Annual South East Asian Association for Institutional Research Conferences. Sept 5 - 7, Langkawi, Kedah.

45. Muhammad Sukri Saud, Nor Fadila Mohd. Amin, Widad Othman and Megat Aman Zahiri Megat Zakaria (2005). " E-Learning Computer Technology Skills and Knowledge for Technical and Vocational Teachers in Malaysia." International Symposium on E-Learning. July 25 - 26., Universiti malaysia Sabah, Sabah.

Proceedings/Conference (National)

1. Muhammad Shafeq bin Abdul Rashid, Fadzlunsara binti Fajri, Norisham bin A. Rahim, Hassan Aliyu, Corriena Abdul Talib and Nor Fadila Amin (2018). “Teaching Methods that Enhance the Development of Technical and Vocational Students Employability Skills”. In Corriena Abdul Talib & Zakiah Mohamad Ashari (Eds.) A systematic Review on Literature in Educational Research (pp. 42 – 47). UTM Skudai : Sekolah Pendidikan, Fakulti Sains Sosial dan Kemanusiaan, UTM.

2. Christine Jane Ridos, Jessica Janet Ahi, Kasthuri Devi, Nurul Farhana Jumaat and Nor Fadila Amin (2018). “Penggunaan M-Fracto Kit dalam Meningkatkan Pengetahuan

37

Konseptual dan Prosedural Matematik untuk Topik Asas Pecahan”. Prosiding Inovasi dalam Pembelajaran dan Pengajaran, 1, 284 – 301.

3. Yuthisdeeran A/L Maniam, Mages A/P Panjaman, Nurul Farhana Jumaat and Nor Fadila Amin (2018). “Pendekatan Pembelajaran Melalui Bermain Untuk Meningkatkan Kemahiran Murid Membatangkan Suku Kata Terbuka KV+KV Menggunakan Teknologi Realiti Maya”. Prosiding Inovasi dalam Pembelajaran dan Pengajaran, 1, 302 – 334.

4. Vithiawathi A/P Subramaniam, Amutha A/P MUrugarus, Sumitha A/P Subramanian, Nor Fadila Amin and Nurul Farhana Jumaat (2018). “Pendekatan Bermain untuk Meningkatkan Kemahiran Mengenal, Mengingat dan Menyebut Huruf ABC seta Membaca Suku Kata KV+KV dengan Betul”. Prosiding Inovasi dalam Pembelajaran dan Pengajaran, 1, 335 – 349.

5. Mangleswary Salbaraja, Noor Hanizah Ariffin, Haszrina Bakar, Nurul Farhana Jumaat dan Nor Fadila Amin (2018). “Penggunaan Kit TOUCH ME dalam Meningkatkan Pemahaman Pelajar LINUS Matematik Tahun 1”. Prosiding Inovasi dalam Pembelajaran dan Pengajaran, 1, 350 – 364.

6. Mahyuddin Arsat, (2016). “Sustainability and Innovation in Teacher Education Program”. Proceedings of Seminar Kebangsaan Majlis Dekan Pendidikan Universiti Awam 2016. November 13 – 15. TH Hotel, Bayan Lepas, Pulau Pinang, 32 – 38.

7. Asnul Dahar Minghat, Nor Fadila Amin, Ruhizan M. Yasin and Ramlee Mustapha (2012). "Pembinaan Indikator Kelestarian Pendidikan Teknikal dan Voksional Sekolah Menengah Harian Melalui Kajian Delphi." Seminar Kebangsaan Majlis Dekan Pendidikan IPTA (MEDC2012). Oct 7 - 10, Johor Bahru, Johor.

8. Mohamad Bilal Ali, Lokman Mohd. Tahir, Meor Ibrahim Kamaruddin, Mohd. Ali Ibrahim Megat Aman Zahiri Megat Zakaria, Nor Fadila Mohd. Amin, M. Al-Muzzamil Yasin and Muhammad Sukri Saud (2011). "Penilaian Hasil Pembelajaran Program Latihan Mengajar : Praktikaliti di Universiti Teknologi Malaysia." Seminar Majlis Dekan-Pendidikan IPTA (MEDC2011). Sepr 27 - 28, Universiti Putra Malaysia, Serdang, Selangor.

9. Zainuddin Abu Bakar, Meor Ibrahim Kamaruddin, Nor Fadila Mohd. Amin, Mohd. Ali Ibrahim, Megat Aman Zahiri Megat Zakaria and M. Al-Muzzamil Yasin (2010). "Creativity in Teaching and Learning in the Faculty of Education of Malaysian Public Universities." Seminar Majlis Dekan-Pendidikan IPTA (MEDC2010). Aug 2-3, Shah Alam, Selangor.

10. Nor Fadila Mohd. Amin and Muhammad Sukri Saud (2008). "Pelaksanaan Kursus Reka Cipta : Pengalaman Pengajaran dan Pembelajran di UTM". Educational Postgraduate Research Seminar (EDUPRES 2008). Dec 25 - 27, Universiti Teknologi Malaysia, Johor.

11. Muhammad Sukri Saud, Sarimah Ismail, Mohd. Safarin Nordin and Nor Fadila Mohd. Amin (2005). "E-Learning Computer Technology : Issues and Challenges for Technical and Vocational Teachers." Seminar Kebangsaan ICT dalam Pendidikan. Nov 17 - 19, Kuala Lumpur.

12. Nor Fadila Mohd. Amin and Widad Othman (2004). "Pembinaan dan Penilaian Sistem Pembelajaran Berasaskan Web Asas Reka Cipta Berdasarkan Teori Pembelajaran Dewasa : Satu Kertas Konsep." National Conference on Graduate Research in Education. Sept. 11, Universiti Putra Malaysia, Serdang, Selangor.

38

13. Nor Fadila Mohd. Amin and Widad Othman (1999). "Cabaran Pelaksanaan Mata Pelajaran Elektif KBSM Lukisan Kejuruteraan di Sekolah Menengah Atas." Malaysia Educational Research Association-Educational Research Association of Singapore Joint Conference (MERA-ERA1999). December, Malacca.

COURSE/WORKSHOPS

1. Bengkel Kerja Penyediaan Penilai Buku Teks Kurikulum Standard Sekolah Menengah Tahun 2018 : Zon Selatan, KSL Hotel & Resort, 13 – 15 November 2018.

2. Bengkel Master Trainer High Impact Educational Practices (HIEPs) Kursus Mata Pelajaran Umum (HIEPs-MPU) Siri 2, Kinrara Resort Puchong, 20 – 22 April 2018.

3. Curriculum Design, Management and Development Level 3, AKEPT, 1 – 2 October 2017.

4. Curriculum Design, Management and Development Level 2, AKEPT, 21 – 22 August 2017.

5. Bengkel Bimbingan Tenaga Pengajar Kursus Tamadun Islam & Tamadun Asia (TITAS), Kursus Hubungan Etnik dan Kursus Kenegaraan Malaysia, UUM, 16 – 17 August 2017.

6. Curriculum Design, Management and Development Level 1 I(Introductory), AKEPT, 25 – 26 July 2017.

7. The Course Outline of University General Courses, UTM 17 April 2017.

8. The Implementation of University General Courses, UTM, 10 July 2017.

9. The Teaching of Credited Co-Curriculum Courses - PUPW Diploma Programme, UTMKL; 9 June 2017.

10. Curriculum Design, Management and Development Level 1 I(Introductory), AKEPT, 25 – 26 July 2017.

11. Scholarship of Teaching and Learning – Advanced Level, Centre for Teaching and Learning (CTL), UTM ; 12 – 13 October 2016.

REFEREES

1. Name : Professor Dr. Zaidatun bin Tasir

Designation : Professor

39

Admin Position : Dean

Address : Faculty of Social Sciences & Humanities Universiti Teknologi Malaysia 81310 Johor Bahru, Johor MALAYSIA

Contact no : +607-5534280


2. Name : Assoc. Prof. Dr. Yusri Kamin

Designation : Assoc. Prof.

Admin Position : Director

Address : Department of Technical and Engineering Education School of Education Universiti Teknologi Malaysia 81310 Johor Bahru, Johor MALAYSIA

Contact no : +607-5534178


1 2020 23JUL CV DR NOR FADILA - Home | PEOPLE AT ...

Documents

Transcript of 1 2020 23JUL CV DR NOR FADILA - Home | PEOPLE AT ...