Post on 30-May-2018
8/14/2019 Aula Timur 3
http://slidepdf.com/reader/full/aula-timur-3 1/1
AULA TIMUR
BANDUNG INSTITUTE OF TECHNOLOGY
INSPECTION FORM
(1). DEFECT CATEGORIES : PLEASE MARK ONLY
-CATEGORY 1 (1>25%): still in good condition, can be
observe, replace & repair)
-CATEGORY 2 (26>50%): averagely, need to be observed
& replace/repair as scheduled)
-CATEGORY 3 (51-75%): serious, need to be replaced
asap
-CATEGORY 4(76-100%): critically, must be replaced
(2).CAUSE(s) OF DEFECT
BUILDING DESIGN
-Exposure to sunlight causes the building façade to
crack, fade.
-Changes of temperature cause crack and building
materials contract.
-Rain causes humidity, rot, and leakage.
-Wind and dust causes dirty stain, erosion that can spoil
certain components.
-Humidity can affect the stability of the building
structure, can cause the growth of algae, fungi and plant
growth on buildings.
-Increase of water level causes dampness on building
walls, weakens the strength of a building as corrosion
occurs, spoils the paint of a building.
-others
DURABILITY OF MATERIALS
-Short term of usage and easily spoil as the strength of
material is low and sensitive towards outer environment.
-Insects and fungi on materials timber based easily
attacked by insects.
-Absorption of water.
-Erosion on materials that can’t stand heavy loads,
frictions and repeatedly usage.
-Corrosion happens as the materials are being exposed
to sun, rain without no anti-corrosion coating.
-Disengagement of materials happen as it is easily
broken, fragile to debris. This is because of exposure to
sun.
-Others.
BUILDING CONSTRUCTION
-It doesn’t have quality observation during construction
-Quality of material is not being proper observed, from
the aspect of how it is being used or installed.
-Weak quality of inspection. Lack competency of
inspection.
-Lack preparation of protection towards sun exposure
and rain during construction works.
-Unstable of site preparation problem happens as the soil
is now well compacted.
-Others.
-Impact of the surrounding developments is something
that can’t be avoid. It can gives impact towards
surrounds building.
-Others.
USAGE AND OUTER PRESSURE
-Misused of existing facilities by the parties for private
usage.
-Vandalism towards material, building components and
elements by irresponsible parties.
-Chemical agents being used to clean up the building as
it can erodes the surface of the building.
-Others.
OTHERS
-Animals-Plant growth-Late repair -Changes in structural element-Others
(3).TYPES OF DEFECT
-Abraded (haus)-Bend-Blister -Corrosion-Crack-Can’t be close-Can’t be lock-Can’t be open-Collapse-Curve-Damp-Decay-Dirt-Disengage (lerai)
-Electrocuted-Erosion-Fade-Friction-Fiber -Hole-Hollow-Leak-Lost-Mold-Not functioning-Poor Installation-Relocation of building-Rough surface-Rust-Sagging (tergantung)-Settlement
-Split (rekah)-Spotty surface-Stagnant-Torn-Unstable-Unsuitable Installation-Untidy-Vandalism-Vibration-Weather
8