en Operating Instructions Canister Vacuum Cleaner

fr Mode d'emploi Aspirateur-chariot

es Instrucciones operativas Aspiradora de contenedor

SBAN0SBCN0

M.-Nr. 10 852 951

HS12

2

en ....................................................................................................................... 5

fr ......................................................................................................................... 27

es ........................................................................................................................ 54

3

Only Miele FilterBags, filters and accessories with

the "Original Miele" logo can be used with this

vacuum. Only then can the suction power of the

vacuum cleaner reach its optimum potential creating

the best possible cleaning results.

USE OF NON-MIELE COMPONENTS MAY VOID

THE WARRANTY.

�The use of FilterBags made of paper or a similar

material, or FilterBags with a cardboard retaining

plate can lead to serious damage to the vacuum

cleaner and may void the warranty, just as with the

use of FilterBags without the "Original Miele" logo.

The "Original Miele" Logo will appear on the

packaging or directly on the FilterBag.

Purchasing new FilterBags and filtersOriginal Miele FilterBags and filters can be purchased

from an authorized Miele vacuum dealer or by visiting the

Miele store at www.mieleusa.com.

en - Contents

4

IMPORTANT SAFETY INSTRUCTIONS ................................................................  5

Appliance description .........................................................................................  10

Caring for the environment ................................................................................  12

References to illustrations..................................................................................  13

Preparing for use .................................................................................................  13

Use ........................................................................................................................  15

Setting down and storing the vacuum cleaner.................................................  16

Maintenance ........................................................................................................  16Purchasing new FilterBags and filters ................................................................... 17Ordering the correct FilterBags and filters ............................................................ 17When to change the FilterBag .............................................................................. 17How the FilterBag change indicator works ........................................................... 18How to replace the FilterBag ................................................................................ 18When to change the motor protection filter........................................................... 18How to change the motor protection filter ........................................................... 18When to replace the exhaust filter AirClean .......................................................... 19How to replace the AirClean exhaust filter ........................................................... 19When to replace the Active AirClean 30/HEPA AirClean 30 exhaust filter ........... 19How to replace the Active AirClean 30/HEPA AirClean 30 exhaust filter ............. 19Replacing one type of exhaust filter with another ................................................ 20When changing the filter please note.................................................................... 20When to change the thread catchers? .................................................................. 20How to replace the thread lifters .......................................................................... 20

Cleaning and care ...............................................................................................  20

Frequently Asked Questions ..............................................................................  21

Technical Service.................................................................................................  22Contact in case of fault ......................................................................................... 22Warranty ................................................................................................................ 22

Optional accessories ..........................................................................................  22Limited Warranty - Vacuum Cleaners USA .......................................................  24

en - IMPORTANT SAFETY INSTRUCTIONS

5

This vacuum cleaner complies with current safety re-quirements. Inappropriate use can, however, lead to per-sonal injury and damage to property.To avoid the risk of accidents and damage to the vacuumcleaner, please read the operating instructions carefullybefore using it for the first time. They contain importantinformation on its safety, operation and maintenance.Keep these operating instructions in a safe place andpass them on to any future user.

Always disconnect the vacuum cleaner from the powersupply when you have finished using it, before changingany accessories, as well as for maintenance work andcleaning. Turn the vacuum cleaner off and unplug it.

Correct use

This vacuum cleaner is intended for cleaning flooring indomestic households and similar residential environments.

This vacuum cleaner can be used for all normal cleaningof carpets, rugs and hard flooring.

This vacuum cleaner is not intended for outdoor use.

This vacuum cleaner is intended for use at altitudes ofup to 1300 ft (4000 m) above sea level.

The vacuum cleaner must only be used to vacuum dryfloor surfaces. Do not use on people and animals. Anyother usage, modification or alteration is not supported bythe manufacturer and could be dangerous.

en - IMPORTANT SAFETY INSTRUCTIONS

6

Persons which lack physical, sensory or mental abilitiesor experience with the machine should not use it withoutsupervision or instruction by a responsible person.

Safety with children

Danger of suffocation! Ensure that any plastic wrap-pings, bags, etc. are disposed of safely and kept out of thereach of children.

Do not allow the vacuum cleaner to be used as a toy.Close attention is necessary when used near children.

Technical safety

Before using the vacuum cleaner and its accessories,check for any visible signs of damage. Do not use a dam-aged appliance.

Ensure that the connection data on the data plate of thevacuum cleaner (voltage and frequency) match the house-hold power supply. Without modifications, the vacuumcleaner is suited for 50Hz or 60Hz.

The electrical outlet must be fitted with a 15 A fuse.

Reliable and safe operation of this vacuum cleaner canonly be assured if it has been connected to the electricitysupply.

Repairs must only be performed by an authorized ser-vice agent in accordance with national and local safetyregulations. Unauthorized repairs could cause injury or ma-chine damage. Otherwise the warranty will be void.

en - IMPORTANT SAFETY INSTRUCTIONS

7

Do not pull or carry the vacuum cleaner by the powercord, and be careful not to damage the cord when with-drawing the plug from the socket. Keep the cord awayfrom sharp edges and do not let it get pinched, for exam-ple, under a door. Avoid running the vacuum cleaner overthe cord. This could damage the cord, plug or socket. Theappliance must not be used if any of these have suffereddamage.

Do not use the vacuum cleaner if the power cord isdamaged. If the power cord is damaged it must be re-placed together with the cord reel. For safety reasons thismust only be done by Miele Technical Service or a Mieleauthorized service technician.

When vacuuming, in particular fine dust, e.g. sawdust,sand, plaster, flour, talcum powder etc., electrostaticcharges build up naturally. Under certain conditions thesecharges will be released. To avoid the unpleasant effects ofthese discharges, a metal inlay has been incorporated intothe underside of the handle. Please make sure that youkeep your hand in constant contact with this metal stripduring vacuuming.

Do not let the vacuum cleaner get wet. Clean only with adry cloth or slightly damp cloth when disconnected fromthe electrical supply.

Repairs should only be carried out by a Miele-authorizedservice technician. Repairs and other work by unqualifiedpersons can cause considerable danger to users.

en - IMPORTANT SAFETY INSTRUCTIONS

8

Defective components should be replaced by Miele orig-inal parts only. Only with these parts can safety of the ap-pliance be assured as intended by the manufacturer.

Proper use

To avoid the risk of damage, do not use the vacuumcleaner without the FilterBag, dust compartment filter andexhaust filter in place.

The dust compartment cover will not close without a Fil-terBag inserted. Do not force it.

Do not vacuum up anything which has been burning orsmoking, e.g., cigarettes, ashes or hot ash, whether glow-ing or apparently extinguished.

Do not use the vacuum cleaner to vacuum up any water,liquid or damp dirt. Wait until any freshly cleaned or sham-pooed rugs or carpets are completely dry before attempt-ing to vacuum.

Do not use the vacuum cleaner to vacuum toner dust.Toner, such as that used in printers and photocopiers, canconduct electricity.

Do not vacuum up any flammable or combustible liquidsor gases and do not vacuum in areas where such sub-stances are stored.

Do not vacuum at head height and do not let the suctionget anywhere near a person's head.

en - IMPORTANT SAFETY INSTRUCTIONS

9

Accessories

To avoid the risk of injury when vacuuming with a Mieleturbobrush, do not touch the rotating roller brush.

It is not advisable to vacuum directly with the handle,i.e., without an accessory attached, as the rim could getdamaged and you could hurt yourself on sharp edges.

Only use genuine FilterBags, filters and accessories withthe “Original Miele” logo on them. Otherwise the manufac-turer cannot guarantee the safety of the product.

California Proposition 65THE FOLLOWING WARNING IS REQUIRED BY THE STATE OF CALIFORNIAFOR CALIFORNIA RESIDENTS ONLY:

WARNING:Cancer and Reproductive Harm -www.P65Warnings.ca.gov.

SAVE THESE INSTRUCTIONS

en - Appliance description

10

en - Appliance description

11

a XXL handle *

b Handle *

c Air inlet valve

d Release buttons *

e Connection piece for storage *

f Telescopic suction wand *

g Hose connection socket

h EasyLock suction wand *

i Telescopic suction wand release mechanism *

j Dust compartment lid release button

k Suction power selector

l Floorhead *

m Carrying handle

n Original Miele FilterBag

o Motor protection filter

p AirClean filter *

q On/off foot switch

r Park system for pauses during vacuuming

s Power cord

t Foot switch for automatic cord rewind

u FilterBag change indicator

v Accessories holder with three accessories

w Suction hose

Underneath - suction wand holder (not illustrated)

* These features are model-specific and may vary or may not be available on yourvacuum cleaner.

en - Caring for the environment

12

Disposal of the packing mate-rialThe cardboard box and packing materi-als protect the appliance during ship-ping. They have been designed to bebiodegradable and recyclable.

Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of children. Dan-ger of suffocation!

Disposing of the FilterBagsand filtersFilterbags and filters are made from en-vironmentally friendly materials, and canbe disposed of with the normal house-hold waste, as long as they have beenused exclusively for general householddust.

Disposing of your old appli-anceBefore disposing of your old applianceremove the FilterBag and filters and dis-pose of them with your householdwaste.

Electronic and electrical appliancescontain many valuable materials. Theyalso contain certain materials, com-pounds and components which wereessential for their correct functioningand safety. These could be hazardousto your health and to the environment ifdisposed of with general waste or ifhandled incorrectly. Please do not,therefore, dispose of your old appliancewith general waste.

Instead, please make use of officiallydesignated collection and disposalpoints to dispose of and recycle electri-cal and electronic appliances. By law,you are solely responsible for deletingany personal data from the applianceprior to disposal. Please ensure thatyour old appliance poses no risk to chil-dren while being stored for disposal.

en-US

13

References to illustrations

The illustrations referred to in the textare shown on the fold-out pages atthe end of these Operating Instruc-tions.

Preparing for use

Attaching the suction hose (Fig. 01)

Insert the hose connector into thesuction socket on the vacuumcleaner until it clicks into position.

Remove the suction hose

Press both release buttons at theside of the hose connector and liftthe hose from the socket .

Connect the suction hose to the han-dle (Fig. 02)

Fit the connector at the other end ofthe suction hose into the handle untilit clicks into position.

Your vacuum cleaner is fitted with oneof the following suction wands, de-pending on model.

– EasyLock suction wand

– Comfort telescopic suction wand

To assemble the EasyLock wand(Fig. 03)

Hold the suction wand by the con-nection piece and push it into thesecond suction wand, turning itclockwise or counter-clockwise untilit clicks into position.

Slide the connection piece upwardsuntil it clicks into position.

Connecting the handle to the wand(Fig. 04)

Insert the handle into the suctionwand until it clicks into position. Todo this, line up the guides on the twopieces.

To detach the handle

To release the handle from the wand,press the release button and pull thehandle out of the wand, twisting itslightly as you do so.

Adjusting the telescopic suctionwand (Fig. 05)

One part of the telescopic suction wandis packed inside the other and it can beadjusted to suit your height for comfort-able vacuuming.

Grasp the release mechanism andadjust the telescopic suction wand tothe required length.

Connect the suction wand to thefloorhead (Fig. 06)

Push the suction wand into the floor-head and turn it clockwise orcounter-clockwise until it clicks intoposition.

To separate the suction wand fromthe floorhead, press the release but-ton and pull the suction wand awayfrom the floorhead, twisting it slightlyas you do so.

Adjusting the floorhead (Fig. 06)

(only for models with a reversible floorhead included in the standard version)

This vacuum cleaner can be used fordaily cleaning of carpets, rugs, and ro-bust hard flooring.

en-US

14

Miele offer a range of other floorheads, -brushes and accessories for othertypes of flooring and special require-ments.

Please observe the flooring manu-facturer's cleaning and care instruc-tions.

Vacuum carpets and rugs with thebrush retracted:

Press the foot switch .

Clean hard floors, especially delicateflooring susceptible to scratches andflooring with gaps or deep crevices,with the brush extended:

Press the foot switch .

Activating the exhaust filterTimeStrip change indicator®

Depending on the model, your vacuumcleaner will be fitted as standard withone of the following exhaust filters (Fig.07).

a AirClean

b Active AirClean 30 (black)

c HEPA AirClean 30 (white)

If your vacuum cleaner is fitted with ex-haust filter b or c, you need to activatethe TimeStrip® exhaust filter change in-dicator.

Pull the release catch for the dustcompartment lid upwards and openthe lid as far as it will go (Fig. 08).

Remove the indicator strip (Fig. 09).

Press the TimeStrip® exhaust filterchange indicator (Fig. 10).

After approx. 10–15 seconds a thin redline will appear in the left-hand side ofthe display (Fig. 11).

Close the dust compartment lid se-curely, making sure it clicks into posi-tion. Take care not to trap the Fil-terBag when doing so.

How the TimeStrip® exhaust filterchange indicator works

The TimeStrip® exhaust filter changeindicator shows the remaining func-tional life of the exhaust filter. After ap-prox. 50 operating hours, or approx.one year of average use, the display willbe completely filled with red (Fig. 12).

Using the accessories supplied(Figs. 13 + 14)

Dusting brush

Upholstery nozzle

Crevice nozzle

Accessory holder for the three ac-cessories supplied

Symbols on the holder show where toattach the different accessories.

Attach the accessories holder to thehose connector socket at the top orbottom of the suction hose. Makesure it clicks into position.

Some models are supplied as standardwith one of the following accessorieswhich are not illustrated.

– AllergoTeQ floorhead

– Turbobrush

en-US

15

These vacuum cleaners are suppliedwith separate operating instructions forthe relevant accessory part.

Convertible floorhead / floor brush(Fig. 15)

(included as standard depending onmodel)

For general use and also for vacuumingthe stairs.

For safety reasons when vacu-uming stairs, it is best to start at thebottom of the stairs and move up-wards.

Parquet floorbrush (SBB Parquet-3)

(included as standard depending onmodel)

This brush has natural bristles and isdesigned for use on smooth floors thatare susceptible to scratching.

Use

Power cord

Unwind the cord completely toaid the vacuum in dissipating heat.Do not pull or carry by the cord, usethe cord as a handle, close a door onthe cord, or pull the cord aroundsharp edges or corners. Do not runthe appliance over the cord. Keepthe cord away from heated surfaces.Do not unplug by pulling the cord. Tounplug grasp the plug, not the cord.This appliance is equipped with apower cord reel. Hold the plug whenrewinding onto cord reel. Do not al-low plug to whip when rewinding.

Unwinding the cord(Fig. 16)

Pull the power cord out to the re-quired length.

If vacuuming for longer than30 minutes, the cord must be pulledout all the way. Danger of overheat-ing and damage.

Rewinding the cord

Remove the plug from the socket.

Press the rewind foot control. Thecord will rewind automatically.

Turning the vacuum cleaner on andoff (Fig. 17)

Press the On/Off foot control .

During vacuuming

When vacuuming, in particularfine dust, e.g. dust, sand, plaster,flour, etc., electrostatic charges buildup naturally. Under certain conditionsthese charges will be released. Toavoid the unpleasant effects of thesedischarges, a metal inlay has beenincorporated into the underside ofthe handle. Please make sure thatyou keep your hand in constant con-tact with this metal strip during vacu-uming (Fig. 18).

Regulating the suction power(Fig. 19)

The suction power can be regulated tosuit the type of flooring being cleaned.Reducing the suction power reducesthe amount of effort required to maneu-ver the floor brush.

en-US

16

The vacuum cleaner has symbols onthe controls which indicate the type ofuse the settings are suitable for.

Curtains, fabric

Upholstery, cushions

Deep pile carpets, rugs and run-ners

Energy-saving vacuuming. Thissetting is also very quiet

Low pile carpet and rugs

Hard flooring and heavily soiledcarpets and rugs

Turn the suction power selector man-ually to the suction power setting yourequire.

Opening the air inlet valve (Fig. 20)

It is easy to reduce the suction powerfor a short time, e.g., to prevent rugs orother objects being sucked into thevacuum cleaner.

Open the air inlet valve on the handlefar enough to reduce the suctionpower.

This reduces the suction on the respec-tive nozzle used.

Setting down and storing thevacuum cleaner

Park system for pauses during vacu-uming (Fig. 21)

The Park system allows you to conve-niently park the suction wand and floor-head during pauses.

Slot the floorhead into the parking at-tachment on the vacuum cleaner.

If your vacuum cleaner is on a slop-ing surface, e.g. a ramp,- retract the telescopic suction wandfully- do not use the park system if yourvacuum cleaner has an EasyLocksuction wand.

Park system for storage(Figs. 22 + 23)

Always disconnect the vacuumcleaner from the power supply whenyou have finished using it. Removethe plug from the socket.

Stand the vacuum cleaner upright.

If your vacuum cleaner has a tele-scopic suction wand, retract the wandfully so that it takes up less room forstorage.

Slot the floorhead downwards intothe parking attachment.

If your vacuum cleaner has an Easy-Lock suction wand you can separatethe two sections for storage purposes.

Press the release button on the lowersection and pull the top section out.

Push the connection piece attachedto the upper wand section into thelower section.

Maintenance

Always switch off the vacuumcleaner for maintenance work andremove the plug from the outlet.

The Miele filtration system consists ofthree components:

en-US

17

– Original Miele FilterBag

– Motor protection filter

– Original Miele exhaust filter

These will need to be replaced fromtime to time to ensure that your vacuumcleaner performs efficiently.

We recommend only using genuineFilterBags, filters, and accessorieswith the “Original Miele” logo onthem. This will ensure that the suc-tion power of the vacuum cleaner ismaintained, giving the best possiblecleaning results.FilterBags with the “Original Miele”logo on them are not made from pa-per or paper-based materials and nordo they have a cardboard collar. Thisis why our FilterBags are particularlylong-lasting and reliable.Please note that appliance faults anddamage originating from the use ofaccessories which do not carry the“Original Miele” logo will not be cov-ered by the appliance guarantee.

Purchasing new FilterBags and filters

Original Miele FilterBags and filters areavailable from the Miele web store,Miele Technical Service, and your Mieledealer.

Ordering the correct FilterBags andfilters

Only use original Miele GN FilterBagswith a blue collar and original Miele fil-ters. These are identified by the “ORIGI-NAL Miele” logo on the packaging.

Every packet of original Miele FilterBagscontains four bags, one AirClean ex-haust filter, and one motor protection fil-ter. Original Miele multipacks contain 16FilterBags, four AirClean exhaust filters,and four motor protection filters.

Original Miele exhaust filters can alsobe purchased separately from yourMiele dealer or Miele Technical Service.Please quote the model number of yourvacuum cleaner when ordering to makesure you get the correct filter. You canalso order all accessories via the Mieleweb store.

When to change the FilterBag(Fig. 24)

Change the FilterBag when the colormarker in the FilterBag change indicatorturns red.

FilterBags are disposable and in-tended to be used only once. Dis-pose of the entire FilterBag. Do notattempt to re-use. Blocked pores re-duce the efficiency of the vacuumcleaner.

Checking the FilterBag change indi-cator

Attach the floor brush to the vacuumcleaner (depending on the model).

Switch the vacuum cleaner on andselect the highest power setting.

Lift the floor brush off the floor a little.

en-US

18

How the FilterBag change indicatorworks

The FilterBag change indicator is set fornormal household dust. This generallycontains a mixture of dust, hair,threads, carpet lint, grit, etc.

However, if the cleaner has been usedto vacuum up fine dust, such as plaster,brick dust, cement or flour, the pores ofthe FilterBag will become blocked veryquickly. This affects the air permeability of thebag, and the marker will indicate thatthe bag is “full” even when it is not. Ifthis happens you must still change theFilterBag because suction power will begreatly reduced by blocked pores in theFilterBag.

If, on the other hand, a large amount ofhair and carpet lint which typically con-tains a lot of air is vacuumed up, the in-dicator may fail to react even thoughthe bag is full. You should still change it.Both these extremes can occur.

How to replace the FilterBag (Fig. 25)

Press both release buttons at the sideof the hose connector, and lift thehose from the socket (Fig. 01).

Pull the release catch for the dustcompartment lid upwards and openthe lid as far as it will go (Fig. 08).

The FilterBag has a flap which closesautomatically when the dust compart-ment lid is raised to prevent any dustescaping.

Pull the FilterBag out by the grip onthe collar.

Fit the new FilterBag into the holderas far as it will go. Leave it folded upwhen you take it out of the box.

Close the dust compartment lid se-curely, making sure it clicks into posi-tion. Take care not to trap the Fil-terBag when doing so.

An empty operation lock preventsthe dust compartment lid from clos-ing without a FilterBag in place. Donot use force!

Insert the hose connector into thesuction socket on the vacuumcleaner until it clicks into posi-tion (Fig. 01).

When to change the motor protectionfilter

Replace this filter every time you start anew packet of filter bags.Every packet of original Miele filter bagscontains a motor protection filter. Multi-packs contain four motor protection fil-ters.

How to change the motor protectionfilter (Fig. 26)

Open the dust compartment lid.

Pull the FilterBag out by the grip onthe collar.

Unclip the filter frame and replace themotor protection filter.

Close the filter frame.

Fit the FilterBag into the holder as faras it will go.

Close the dust compartment lid.

en-US

19

When to replace the exhaust filterAirClean

Replace this filter every time you start anew packet of Miele FilterBags. Everypacket of original Miele FilterBags con-tains one AirClean exhaust filter. Multi-packs contain four AirClean filters.

How to replace the AirClean exhaustfilter (Fig. 27)

Do not use more than one exhaust fil-ter at a time.

Open the dust compartment lid.

Release the filter frame and raise itupwards. Grasp the used AirCleanfilter by the clean, unsoiled section(see arrow) and take it out.

Replace it with a new AirClean ex-haust filter.

If you wish to fit an Active AirClean30 or HEPA AirClean 30 exhaust fil-ter, see “Replacing one type of ex-haust filter with another”.

Close the filter grille.

Close the dust compartment lid.

When to replace the Active AirClean30/HEPA AirClean 30 exhaust filter(Fig. 12)

Replace this filter when the exhaust fil-ter TimeStrip® change indicator iscompletely red.The indicator lights up after approxi-mately 50 operating hours, which isequivalent to about a year of averageuse. You can continue vacuuming whenthe light comes on. However, the suc-tion power will be reduced as will theeffectiveness of the filter.

How to replace the Active AirClean30/HEPA AirClean 30 exhaust filter(Fig. 28)

Do not use more than one exhaust fil-ter at a time.

Open the dust compartment lid.

Lift the exhaust filter and remove it.

Insert a new exhaust filter, makingsure it goes in properly, then push itdown into position.

Press the TimeStrip® exhaust filterchange indicator (Fig. 10).

After approx. 10–15 seconds a thin redline will appear in the left-hand side ofthe display (Fig. 11).

If you wish to fit the AirClean exhaustfilter, see “Replacing one type of ex-haust filter with another”.

Close the dust compartment lid.

en-US

20

Replacing one type of exhaust filterwith another (Fig. 07)

Depending on the model, your vacuumcleaner will be fitted as standard withone of the following exhaust filters :

a AirClean

b Active AirClean 30 (black)

c HEPA AirClean 30 (white)

Do not use more than one exhaust fil-ter at a time.

When changing the filter please note

1. If you wish to replace exhaust filter awith filter b or c, you must com-pletely remove the filter grille beforeyou install the new exhaust filter.

You must also activate theTimeStrip® exhaust filter change in-dicator (Fig. 10).

2. If you wish to replace exhaust filter bor c with filter a, you must insert thenew filter into a filter grille * before in-stalling (Fig. 27).

* Filter grille – see “Optional acces-sories”

When to change the thread catchers?

(only possible for models with a re-versible floorhead included as standard)

The thread catchers on the suction inletof the reversible floorhead can be re-placed. Check them from time to timeand replace them if the pile has worndown.

How to replace the thread lifters(Fig. 29 + 30)

Use a suitable screwdriver to removethe thread lifters from the slots.

Install new thread lifters.

Replacement parts are available fromyour Miele dealer or through MieleTechnical Service.

Cleaning and care

Always disconnect the vacuumcleaner from the electrical supply be-fore cleaning it. Turn off and unplugit.

Vacuum cleaner and accessories

The vacuum cleaner and all plastic ac-cessories can be cleaned with a propri-etary cleaner suitable for plastic.

Do not use abrasive cleaningagents, glass cleaning agents, all-purpose cleaners or oil-based condi-tioning agents!

Dust compartment

The dust compartment can, if neces-sary, be cleaned using a dry duster,brush or, if available, a second vacuumcleaner to vacuum the dust out.

Monitor the filter bag change indicatorand inspect all filters regularly. Clean orreplace them when necessary accord-ing to these Operating Instructions.

Do not let the vacuum cleanerget wet. If moisture gets into the ap-pliance, there is a risk of electricshock.

en-US

21

Frequently Asked QuestionsWith the help of the following guide minor faults in the performance of the ma-chine, some of which may result from incorrect operation, can be remedied with-out contacting the Service Department.

This guide may help you to find the reason for the fault, and how to correct it.

Problem Possible cause and solution

The vacuum cleanerturns off automatically.

A temperature limiter turns the vacuum cleaner off au-tomatically if it gets too hot. This can occur if, for instance, large articles block thewand or when the FilterBag is full or contains parti-cles of fine dust. A heavily soiled exhaust or dustcompartment filter can also be the cause of overheat-ing. Turn the vacuum cleaner off immediately using the

On/Off foot switch , and unplug it.

After removing the cause, wait for approximately 20 -30 minutes to allow the vacuum cleaner to cool down.It can then be turned on again.

en-US

22

Technical Service

Contact in case of fault

In the event of a fault which you cannotremedy yourself, please contact yourMiele dealer or Miele Technical Service.

Contact information for Miele Techni-cal Service can be found at the end ofthis document.

Warranty

For more information about warrantyconditions, please contact Miele Tech-nical Service.

Optional accessories

Certain models are supplied as stan-dard with one or more of the followingaccessories.

Please observe the flooring manu-facturer's cleaning and care instruc-tions.

These and many other products can beordered from the Miele web store, MieleTechnical Service or from your Mieledealer.

Floor tools / Brushes

AllergoTeQ floorhead(SBDH 285-3)

This floor brush is suitable for daily hy-gienic cleaning of all floor surfaces. Thelevel of cleanliness of the floor shows ina color “traffic light” display when vacu-uming.

TurboTeQ (STB 305-3) / Turbobrush(STB 205-3)

This brush is ideal for removing lint andhair from short-pile carpet.

Floor brush Parquet (SBB Parquet-3)

This brush has natural bristles and isdesigned for use on smooth floors thatare susceptible to scratching.

Parquet Twister floorbrush withswiveling head (SBB 300-3)

With natural bristle for vacuumingsmooth hard floors and small gaps.

Floorbrush Parquet Twister XL withswiveling head (SBB 400-3)

With natural bristles for quickly vacu-uming smooth hard floors and smallgaps.

Other accessories

MicroSet accessory case (SMC 20)

This set is specially designed for clean-ing small objects and difficult to reachareas (such as PC keyboards, stereoequipment, intricately carved furnitureand ornaments, models, etc).

Flexible Mini Turbobrush XS(STB 20) / Turbo Mini (STB 101)

For vacuuming upholstery, mattressesor car seats, etc.

Universal brush (SUB 20)

For dusting books, shelves, etc.

Radiator brush (SHB 30)

For dusting radiators, narrow shelvesand crevices.

en-US

23

Mattress tool (SMD 10)

For vacuuming upholstery, mattresses,cushions, curtains, covers, etc.

Crevice nozzle, 12" (300 mm)(SFD 10)

Extra long crevice nozzle for cleaning infolds, crevices and corners.

Crevice nozzle, 22" (560 mm)(SFD 20)

Flexible crevice nozzle for vacuuminghard to reach places.

Upholstery nozzle, 7 1/2" (190 mm)(SPD 10)

Extra wide upholstery nozzle for clean-ing upholstered furniture, mattressesand pillows.

Comfort handle with lighting (SGC20)

Lights up the area being vacuumed.

Filters

Active AirClean 30 exhaust filter (SF-AA 30)

For a significant reduction of unpleasantodors. Ideal for households with pets orsmokers.

HEPA AirClean 30 exhaust filter (SF-HA 30)

Effectively filters fine dust and allergens.Ideal for people allergic to house dust.

Filter frame

The filter frame is required if you wish touse an AirClean filter instead of anActive AirClean 30 or HEPA AirClean 30filter.

en - Limited Warranty - Vacuum Cleaners USA

24

20

What This Warranty Covers And For What Period The Coverage ExtendsMiele, Inc. (hereinafter "Miele") warrants to the original purchaser of this product, living in the United States of America, who purchased their vacuum from a Miele Authorized Distributor or Dealer:a. That this product, including all of its Miele authorized parts is free of defects in material and workmanship.b. That this product, if found to be defective within the stated warranty period, will be repaired free of charge to the

consumer (both parts and labor) by an authorized Miele service agent.c. The warranty period for vacuum cleaners other than those listed below and the Scout RX1 and RX2 is one (1) year

from the date of purchase, with the following exceptions; vacuum motors, power head motors, and the structural integrity of the vacuum cleaner casings (bodies) are warranted for seven (7) years from the date of purchase.

d. The warranty period for the models listed below is five (5) years from the date of purchase, with the following exceptions; vacuum motors, power head motors, and the structural integrity of the vacuum cleaner casings (bodies) for these models are warranted for ten(10) years from the date of purchase.

Model Model Model ModelComplete C3 HomeCare Complete C3 Brilliant Compact C1 HomeCare Classic C1 HomeCare (HEPA)Complete C3 HomeCare+ Dynamic U1 HomeCare Compact C2 Homecare Blizzard CX 1 HomeCare

e. The warranty period of the Scout RX1 and Scout RX2 is two (2) years from the date of purchase for the complete vacuum, except for the battery, which will be warranted for one (1) year from the date of purchase.

f. This warranty only applies while the product remains within the United States, and is null and void in any other US territories, possessions, or foreign countries.

Commercial UseVacuum cleaners other than the Scout RX1 and Scout RX2 used for commercial purposes, except for their motors, will be warranted for a period of six (6) months from the date of purchase. The motors of commercially used upright vacuums will be warranted for one (1) year and the motors of all other commercially used vacuum cleaners, except for the Scout RX1 and Scout RX2 will be warranted for two (2) years. There is no warranty for the Scout RX1 or Scout RX2 used for commercial purposes. Thereafter this Limited Warranty shall be null and void.

What is not covered by this WarrantyThis warranty does not cover damage or defects caused by or resulting from repairs, service or alterations to the product or any of its parts or accessories which have been performed by service centers or repairmen not authorized by Miele, or damage or defects caused by negligence, accident, abuse, misuse, improper or abnormal usage or maintenance of the product, its parts or accessories. Ordinary wear and tear or cosmetic damage (scuffs, scratches, gouges, dents, etc.) shall not be considered a defect in materials or workmanship.

Exclusion of Other WarrantiesExcept for the limited warranty provided herein, Miele disclaims any and all other express warranties with respect to the product. Any warranty of merchantability or fitness for a particular purpose is limited in its duration to the term of the limited warranty provided herein. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Limitation of Liability for Special, Incidental or Consequential DamagesMiele will assume no liability, or other obligation with respect to any personal injury or property damage resulting from the use of a vacuum cleaner, or its accessories, replacement parts, etc., which has not been purchased from, or serviced by an Authorized Miele Dealer. Any purchaser who obtains a vacuum cleaner, accessories, replacement parts, etc., from someone other than an Authorized Miele dealer proceeds at their own risk. Miele specifically disclaims any and all liability, whether directly or by way of indemnity, for special incidental, consequential or other damages, whether based on breach of contract, tort, strict or product liability, or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.

Special State LawsThis Limited Warranty gives you specific legal rights; you may have other rights, which vary, from state to state.

ServiceFor service under this Limited Warranty, or to find an Authorized Miele Dealer in your area, please visit us at www.mieleusa.com.

Effective Date: January 1, 2018©2018 Miele, Inc.

LIMITED WARRANTY - VACUUM CLEANERS USA