Lawmate PV-500 EVO2 DVR

Lawmate PV-500 EVO2 is the newest flagship Lawmate model, next model in line of PV-500

Mini DVRs.

Just like the previous model, PV-500 EVO2 is a top quality product in it's price category. With it's features it will provide an actual edge compared to other similar products. Whether you desire high quality recording, digital camera support or ease of use beyond what you have been used to, PV-500 EVO2 is most likely the right choice.

All of before mentioned comes with very high level of configurability and ways to set-up:Resolution support from low VGA to HD, adjustable FPSAnalogue or digital camera supportMultiple recording modes including some not seen in other brandsMultiple ways to operate the PV-500 EVO include touch screen, IR remote and wired controller (all part of standard accessories)Records audio source from integrated microphone or attached camera

New H.264 video compression provides better quality video recording compared to the previous model (PV-500 EVO) for the same video source

Faster file creating is another benefit of the way new compression is integrated in the PV-500 EVO2 that allows less missed A/V material during multi-hour continuous recording sessions.

Several layers of security PV-500 EVO2 records logs of all the functions used on the device. Power on password as well as USB connection password can also be set up with an easy to use virtual on-screen keyboard to add another level of security.  

Each video recording includes serial number of device, exact time and date of recording and frame rate counter to make sure the recording can not be tempered with.

Easy to remove and extend battery system

PV-500 EVO2 while only 22 mm deep, not bigger than a cigarette pack, is actually consisted of 15 mm of PV-500 EVO2 itself and another 7 mm of standard 200 min. 2200 mAH battery (BA-2200). The system allows quick and easy spare battery exchange system as well as installation of extended longevity 400 min. 4400 mAH battery (BA-4400) in matter of seconds.

Motion detect grid

Motion detection for video recording is no longer limited by a factor in environment that is unstable and is not purpose of our recordings.  PV-500 EVO2 firmware allows setting up motion detection grids that will allow you to exclude part of the environment that you do not want motion detection to be effected with.

Whether it be blinking commercial in the background or busy part of the scenery, none of that necessarily needs to trigger the start of your motion recording with a properly set motion detect grid.

Innovating Pre-event and Pre-motion recording modes

PV-500 EVO2 same as every other recorder will offer standard recording mode with on-screen preview, time scheduled recording as well as mentioned grid supported motion detect mode.On top of regular modes, PV-500 EVO2 offers innovating new modes:Pre-event and Pre-motion modes will keep a configurable length buffer of your recording.

What does that mean ?In Pre-event mode although action that you wanted to record has already happened you can start the recording function and the video of the event that has already passed will be saved. When things happen fast and reaction is sometimes not quick enough that is where Pre-event mode really shines.Pre-motion mode works much in the same way and will record events that happened before the motion detect is triggered. It is especially useful in low light sceneries where visual motion detect more often then not triggers a second or two late.

Easy to update firmware

Lawmate provides firmware support for it’s products. Easy to use menu makes firmware installation easy and fool proof.

In case something goes wrong “Restore to factory default” settings is also available. 

Newest firmware for PV-500 EVO2 can be downloaded further below on this page.

On screen zoom function

High resolution recording with a camera such as 800 TV Line CMD-BU13LX can record things that might not as easy to see on a screen of a relatively small sized device such as PV-500 EVO2. There is no worry tough as on screen zoom function is available with a touch on the screen to make sure you are recording the intended scenery.

3 step process to start recording straight from the box.Connect the camera to 2.5 mm jack for analogue camera (figure 4. at the above illustration) or to HDMI-in jack for digital camera (figure 5. at the illustration)Turn the device on by pressing power button (figure 1.)Push the record / stop switch at the top of the DVR to the left (figure 15.)

For more information go here:

www.spyshopeurope.com

Thank You