ISCAR166

FAC

E M

ILLS Da

D3

L

D

ap

Rd°

Designation D Z ap D3 Da L Arbor(1) Rd° kg

H690 FWN D050-04-22-R07 50.00 4 7.00 48.00 22.00 40.00 A 1.2 0.327H690 FWN D050-05-22-R07 50.00 5 7.00 48.00 22.00 40.00 A 1.2 0.310H690 FWN D063-05-22-R07 63.00 5 7.00 48.00 22.00 40.00 A 1.1 0.498H690 FWN D063-07-22-R07 63.00 7 7.00 48.00 22.00 40.00 A 1.1 0.504H690 FWN D080-07-27-R07 80.00 7 7.00 60.00 27.00 50.00 B 1.0 0.997H690 FWN D080-09-27-R07 80.00 9 7.00 60.00 27.00 50.00 B 1.0 0.984H690 FWN D100-08-32-R07 100.00 8 7.00 70.00 32.00 50.00 B 0.8 1.564H690 FWN D100-11-32-R07 100.00 11 7.00 70.00 32.00 50.00 B 0.8 1.621H690 FWN D125-10-40-R07 125.00 10 7.00 82.00 40.00 63.00 B 0.5 2.830

• For cutting speed recommendations, see pages 462-468(1) For adaptation options, see page 461For inserts, see pages: H690 WNMU 0705 (402)

Spare Parts

DesignationH690 FWN D050-04-22-R07 SR M4X0.7IP15 BLD IP15/S7 SW6-T-SH SR M10X25 DIN912H690 FWN D050-05-22-R07 SR M4X0.7IP15 BLD IP15/S7 SW6-T-SH SR M10X25 DIN912H690 FWN D063-05-22-R07 SR M4X0.7IP15 BLD IP15/S7 SW6-T-SH SR M10X25 DIN912H690 FWN D063-07-22-R07 SR M4X0.7IP15 BLD IP15/S7 SW6-T-SH SR M10X25 DIN912H690 FWN D080-07-27-R07 SR M4X0.7IP15 BLD IP15/S7 SW6-T-SHH690 FWN D080-09-27-R07 SR M4X0.7IP15 BLD IP15/S7 SW6-T-SHH690 FWN D100-08-32-R07 SR M4X0.7IP15 BLD IP15/S7 SW6-T-SHH690 FWN D100-11-32-R07 SR M4X0.7IP15 BLD IP15/S7 SW6-T-SHH690 FWN D125-10-40-R07 SR M4X0.7IP15 BLD IP15/S7 SW6-T-SH

H690 FWN90° Face Mills Carrying H690 WNMU 0705 Double-Sided Trigonal Inserts with 6 Helical Cutting Edges

Table - Examples of Cutting Speed for H690 FWN/EWN...07 Cutters

* ISCAR material group in accordance with VDI 3323 standard** Quenched and tempered• First choice for grades

ISO ClassDIN/ISO 513

Workpiece Material Cutting Speed Vc, SFM, for Grades

Description

ISCARMat.

Group*

Typical MaterialsHardness,

HB IC808 IC5100 IC810 IC5400 IC830 IC330AISI/SAE/

ASTM DIN W.-Nr.

P

Non-alloy steel 1 1020 1.044 130-180 180-250 150-220 150-220 130-200 120-180

Alloy steel 8 4340 1.6582 260-300 150-200 130-180 130-180 120-170 100-140

Alloy steel 9 4340 1.6582 HRC 35-42** 100-170 100-150 100-150 100-130 100-120

High alloy steel 10 H13 1.2344 200-220 100-170 100-150 100-150 100-130 100-120

Martensitic s.s. 12 420 1.4021 200 100-150 100-130 100-120

KGrey cast iron 16 Class 40 0.6025 (GG25) 250 200-250 220-300 220-300 180-230

Nodular cast iron 17 Class 65-45-12 0.7050 (GGG50) 200 160-220 180-250 180-250 150-200