Gateone y Smarter-SI - Kepa Mayora - IK4-Ikerlan

© COPYRIGHT IKERLAN 2016 INFODAY ICT-2017 Arrasate-15/12/2016

Ikerlan denon eta denontzako proiektua

©2016 IKERLAN. All rights reserved

GATEONE y SMARTER-SI

Estrategias para que las PYMES lancen nuevos productos partiendo de desarrollos previos en

los CCTT


GATEONE y SMARTER-SIEstrategias para que las PYMES lancen nuevos productos partiendo

de desarrollos previos en los CCTT

Part of the Smart Anything Everywhere initiative

Innovation action under the Horizon 2020 program

Promote the adoption of Smart Technologies and Smart Systems by SME

http://www.smartanythingeverywhere.eu/


Contenido

1. Proceso seguido en GATEONE

2. Proceso seguido en SMARTER-SI

3. Ejemplo-1 de colaboración en GATEONE

4. Ejemplo-2 de colaboración en GATEONE

5. Ejemplo de colaboración en SMARTER-SI

6. Conclusiones

GATEONE y SMARTER-SI


First milestone in the SME innovation cycle

SME tests new technologies and solutions without financial investment

If the test results fit with their expectations in terms of innovation, SME can then engage further collaborations with technology holders

There is no ties attached. The goal is that the SME has a better understanding of the technology capability

SMEs under Gateone framework

Access to unique portfolio of smart solutions


Test a new concept for small lot production Cooperative Foundry Concept. RTOs have built components/parts of systems, i.e. building blocks, which are available and characterised by their high Technology Readiness Level (TRL).Combine these building blocks in so-called Application Experiments (AEs), creating innovative Smart Systems which serve SMEs' needs.

Four preselected AEs

Adjustment of building blocks

System integration and testing

Manufacturing of small lots

Acquisition of new ideas

Selection of sevenadditional AEs

Adjustment of building blocks

System integration and testing

Manufacturing of small lots

Catalogue of Building Blocks

Internallearning loops

Joint manufacturinginfrastructure

CooperativeFoundryCooperativeFoundry

Innovation by Cooperation in Manufacturing

SMEs under Smarter-SI framework


How building blocks fit together in Smarter-SI approach

software and user interfaceelectronics

fluorescence optical reader

fluidic management

system integrationmicrofluidic cartridge

immunoassay microarray spotting

building blockssystem integration

Example:Point-of-care Testing Device

http://www.ikerlan.es/es/




http://www.ingenasa.es/


Example: Demonstrator named UbeesenseSME beneficiary: Laulagun bearingsRTO that contribute: Ikerlan

The RTO, Ikerlan, has already developed a prototype that could fit, with small adaptation, in the use case identified by Laulagun.

The collaboration is directly between Ikerlan and Laulagun. Ikerlan has a limited budget to adapt the existing prototype to fulfill, as much as possible, the requirements. This modifications take around 4-5 months, then, Laulagun tests the device along 3 months

The solution provided by Ikerlan intends to validate a product concept. In case the test phase done by Laulagun covers his expectations, further development, not covered by Gateone, is expected to happen.

The Objective

Monitoring of bearings for wind turbines

Use case in a Gateone

Demonstrator


Consists of a sensor node and a concentrator. The sensor node performs measurements and sends the data wirelessly to the concentrator which is connected to a PC for data visualization. Includes:

•Control electronics: 3 PCB layers(signal conditioning/data processing/RF comm.)• Sensors: accelerometer, strain gage and temperature.•A housing for the sensor node.•A concentrator for wireless signal acquisition and USB connection to a PC.•A software code to modify sensing parameters and visualizing the results

Tests performed in the Test Center of Laulagun Bearings, show that the wireless signal is transmitted from inside the rotor hub, where the sensor node is located and monitors the state of the bearings, to outside the structure, where the concentrator is located

Technical achivement

Inside the hub, when the pitch is moving

Temperature measurements at different locations of the hub


The demostrator includes: A thermocycler, hotplate size 1x1cm on flexible PCBESE-LOG 2-wavelength fluorescence unit Control electronics (PCB)USB connection to a PC and connection to mainsAn interface for thermocycling and detection settings

Use case in a GateoneDemonstrator

Test showing Fluorescence data with Alphasipprotocol

It is a subpart of the whole system.

Performs thermal cycling(RT-100ºC) to a single microchamber(10ml).

Allows the company to adapt the in-tube parameters to the microchamber and optimize its yield

Example: Demonstrator named Microthermos. SME beneficiary: Alphasip.

The Objective

Test a rapid microthermal concept


Example: AE named Clutsen. SME beneficiary: Goizper.RTOs that contribute: Ikerlan(IKL) and Hahn-Schickard(HS)

HS contributes in energy harvesting and low power communication. IKL contributes in sensors and signal conditioning, embedded electronics and packaging. The partners need to collaborate in a common planning, typically 2years, and adapt their technology(building blocks) in order to fulfill final development requirements. The solution is clearly product oriented and finishing level of an industrial prototype. RTO partners commit that they have manufacturing capacity to respond to first and limited number of samples from the SME.

The Objective

Monitor the wear of clutch-brake pads and measure maximum temperature at friction point while clutching. Features: Sensor integration in a wheel ensuring direct measurement; Low power electronics; Energy harvesting and Wireless data transfer

Use case in Smarter-SI Application

Experiment(AE)


Product/Market key questionsWhich product do the RTOs offer?

Wireless sensor integrating temperature and distance measurements.

What do the companies need?

Monitor the temperature and wear of clutch-brake pads to ensure optimum use of the brake and anticipate maintenance

What is the main application or use case?

Add self-monitoring capability to the current cluth-brake product, which is a key solution in bigmachinery in different sectors, in order to avoid mechanical damage in the clutch-brake body and reduce maintenance costs

What is the market objective?

Strengthen market position and share through this innovation. Provide clutch brakes for sectors such as cutting and metal shaping with presses, shears, servo presses, folders, lifting equipment

Use case in Smarter-SI Application

Experiment(AE)


Apoyo a la empresa en su estrategia de innovación(Smartizacion)

Selección de aquellas apuestas con producto y mercado identificado

Financia, en diferente medida, las apuestas de las empresas

Resuelve o identifica la futura fabricación del producto

En la solución dispone de las aportaciones de diferentes centros europeos

Conclusiones

Horizont 2020, ICT-2014-1 GA-No 644596 01.02.2015 – 31.01.2018 5.3 M€ EU funding 15 Partners(6 core partners)

Horizont 2020, ICT-2014-1 Project ID: 644856 Duration: 36 months EU Contribution: 5.3 M€ 9 partners


Eskerrik asko!

www.smarter-si.eu

The H2020 projects SMARTER-SI and GATEONE are part ofthe SmartAnythingEverywhere Initiative

of the European Commission

www.gateone-project.eu

IK4-IkerlanKepa Mayora

Phone: + 34 943 712400E-Mail: [email protected]

https://smartanythingeverywhere.eu/

mailto: [email protected]

mailto: [email protected]

© COPYRIGHT IKERLAN 2016 INFODAY ICT-2017 Arrasate-15/12/2016www.ikerlan.es

IKERLAN - GARAIAPolo de Innovación GaraiaC/ Goiru , 920500 Arrasate-Mondragón

IKERLAN - MIÑANOParque tecnológico de Álava,C/ Juan de la Cierva, 101510 Miñano

IKERLAN - GALARRETAPol. Industrial Galarreta, Parcela 10.5, Edificio A320120 Hernani

IKERLAN - OLANDIXOPº. J. Mª. Arizmendiarrieta, 2

20500 Arrasate-Mondragón

Tel.: 943 71 24 00Fax: 943 79 69 44


SMARTER-SI at a glance

© SMARTER-SI 2016 Speaker, Event, Date

• Objective: Small lot manufacturing of Smart Systems for SMEs

• Concept: Cooperative Foundry Model (CFM)

• 15 RTOs and SMEs offer more than 30 components and subsystems (Building Blocks); developed and validated in former RTD projects

• to be combined for novel smart systems

• no extra R&D work, only for adjustments and interfaces

• 11 Application Experiments (AEs) to prove concept

• Funding: 5.3 M€

Gateone y Smarter-SI - Kepa Mayora - IK4-Ikerlan

Technology

Transcript of Gateone y Smarter-SI - Kepa Mayora - IK4-Ikerlan