8/10/2019 Zanussi Zwt71201wa
1/32
EN User manual
Washer Dryer
ZWT 71201 WA
8/10/2019 Zanussi Zwt71201wa
2/32
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 5Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ 9
Drying Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ 11Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ 11First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13Daily Use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 14
Use - Drying _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 16Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ 18What to do if _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 20Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 23Consumption values _ _ _ _ _ _ _ _ _ _ _ _ 24
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 24Building in _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 28Electrical connection _ _ _ _ _ _ _ _ _ _ _ _ 31Environment concerns _ _ _ _ _ _ _ _ _ _ _ 31
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read thesupplied instructions. The manufacturer is not responsible if an in-correct installation and use causes injuries and damages. Alwayskeep the instructions with the appliance for future reference.
Children and vulnerable people safety
Warning!Risk of suffocation, injury or permanent disability.
Do not let persons, children included, with reduced physical sen-sory, reduced mental functions or lack of experience and knowl-edge use the appliance. They must have supervision or instructionfor the operation of the appliance by a person who is responsiblefor their safety.
Do not let children play with the appliance.
Keep all packaging away from children. Keep all detergents away from children.
Keep children and pets away from the appliance door when it isopen.
If the appliance has a child safety device, we recommend you ac-tivate it.
General Safety Before maintenance, deactivate the appliance and disconnect the
mains plug from the mains socket.2
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
3/32
Do not change the specification of this appliance.
Obey the maximum load volume of 8 kg (refer to the Programmechart chapter).
If the supply cord is damaged, it must be replaced by the manu-
facturer, its service agent or similarly qualified persons in order toavoid a hazard.
The operating water pressure (minimum and maximum) must bebetween 0,5 bar (0,05 MPa) and 8 bar (0,8 MPa)
The ventilation openings in the base (if applicable) must not beobstructed by a carpet.
The appliance is to be connected to the water mains using thenew supplied hose-sets. Old hose sets must not be reused.
Safety instructions
Installation
Remove all the packaging and the transitbolts.
Keep the transit bolts. When you move the
appliance again you must block the drum. Do not install or use a damaged appliance.
Do not install or use the appliance where thetemperature is less than 0 C or where it isexposed to the weather.
Obey the installation instruction suppliedwith the appliance.
Make sure that the floor where you install theappliance is flat, stable, heat resistant and
clean. Do not install the appliance where the appli-
ance door can not be fully opened.
Always be careful when you move the appli-ance because it is heavy. Always wear safetygloves.
Make sure that there is air circulation be-tween the appliance and the floor.
Adjust the feet to have the necessary space
between the appliance and the carpet.
Electrical connection
Warning!Risk of fire and electrical shock.
The appliance must be earthed.
Make sure that the electrical information onthe rating plate agrees with the power sup-ply. If not, contact an electrician.
Always use a correctly installed shockproofsocket.
Do not use multi-plug adapters and exten-sion cables.
Make sure not to cause damage to the mainsplug and to the mains cable. Should the ap-pliance power supply cable need to be re-placed, this must be carried out by our Serv-
ice Centre. Connect the mains plug to the mains socket
only at the end of the installation. Make surethat there is access to the mains plug afterthe installation.
Do not pull the mains cable to disconnectthe appliance. Always pull the mains plug.
Do not touch the mains cable or the mainsplug with wet hands.
Only for UK and Ireland. The appliance has a13 amp mains plug. If it is necessary to
3www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
4/32
change the fuse in the mains plug, use a 13amp ASTA (BS 1362) fuse.
This appliance complies with the E.E.C. Di-rectives.
Water connection
Make sure not to cause damage to the waterhoses.
The appliance is to be connected to the wa-ter mains using the new supplied hose-sets.Old hose sets must not be reused.
Before you connect the appliance to newpipes or pipes not used for a long time, letthe water flow until it is clean.
The first time you use the appliance, makesure that there is no leakage.
Use
Warning!Risk of injury, electrical shock,fire, burns or damage to the appliance.
Use this appliance in a household only.
Do not change the specification of this appli-ance.
Do not put flammable products or items thatare wet with flammable products in, near oron the appliance.
Do not touch the glass of the door while aprogramme operates. The glass can be hot.
Make sure that you remove all metal objectsfrom the laundry.
The final part of the drying cycle occurs with-
out heat (cool down cycle) to ensure that theitems will not be damaged.If you stop the appliance before the end ofthe drying cycle, immediately remove andspread out all items, so that the heat can dis-sipate.
If you use detergent, fabric softener or similarproducts, obey the instructions on the pack-aging.
Wipe away lint that has accumulated aroundthe appliance.
Do not dry the damaged items which containpadding or fillings .
Do not dry items such as foam rubber (latexfoam), shower caps, waterproof textiles andrubber backed articles.
Before drying items that have been in con-tact with substances such as cooking oil,acetone, alcohol , petrol, kerosene, spot re-
movers, turpentine, waxes and wax removers,wash them in hot water with an extra amountof detergent.
Do not dry items if industrial chemicals havebeen used for cleaning.
Make sure that no gas lighters or matcheshave been left in the pockets of the clothing.
Only dry fabrics which are applicable to dryin the tumble dryer. Follow the instructions
on the fabric label. Do not dry not washed items in the appli-ance.
If you have washed your laundry with a stainremover start an extra rinse cycle before youstart the appliance.
Plastic items are not heat resistant.
If you use a detergent ball, remove it be-fore you set the drying programme.
Do not use a detergent ball when you seta non-stop programme.
Warning!Risk of injury or damage to theappliance.
Do not sit or stand on the open door.
Obey the maximum load volume.
Do not dry dripping wet clothes in the appli-ance.
Care and Cleaning
Warning!Risk of injury or damage to theappliance.
Do not use water spray and steam to cleanthe appliance.
Clean the appliance with a moist soft cloth.Only use neutral detergents. Do not useabrasive products, abrasive cleaning pads,
solvents or metal objects.Disposal
4
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
5/32
Warning!Risk of injury or suffocation.
Disconnect the appliance from the mainssupply.
Cut off the mains cable and discard it.
Remove the door catch to prevent childrenand pets to get closed in the appliance.
Product description
1 Detergent dispenser drawer
2 Control panel
3 Door opening handle
4 Rating plate
5 Drain pump
6 Adjustable feet
1 2
3
4
5
6
Child safety
Make sure that children or pets do not climb in-to the drum. To prevent children and pets be-coming trapped inside the drum this machineincorporates a special feature.
To activatethis de-vice, rotate the button(without pressing it)inside the door clock-
wise until the grooveis horizontal. If neces-sary use a coin.
To disablethis de-vice and restore thepossibility of closingthe door, rotate the
button anti-clockwiseuntil the groove isvertical.
5www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
6/32
Detergent dispenser drawer
Compartment for detergent used for pre-wash and soak phase or for stain remover usedduring the stain action phase (if available). Theprewash and soak detergent is added at the be-ginning of the wash programme. The stain re-mover is added during the stain action phase.
Compartment for powder or liquid detergentused for main wash. If using liquid detergentpour it just beforestarting the programme.
Compartment for liquid additives (fabric softener, starch).Follow the product manufacturers recommendations on quantities to use and do not exceed theMAXmark in the detergent dispenser drawer. Any fabric softener or starching additives mustbe poured into the compartment before starting the wash programme.
Control panel
On the following page there is a picture of the control panel. It shows the programme selectordial as well as the buttons, pilot lights and the display. These are presented by relevant num-
bers on the following pages.
1 32 4 5 6 7
910
8
1 Programme selector dial
2 SPIN reduction button
3 OPTION button
4 EXTRA RINSE button
5 DRYING TIME button
6 EASY IRON button
7 START/PAUSE button
8 DELAY START button
9 DOOR LOCKED pilot light
10 Display
6
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
7/32
1-8 Programme selector dial, spin speedbutton, drying level and time, andavailable options
Programme Selector Dial
It allows you to switch the appliance on/off and/or to select a programme.
Spin
By pressing this button you can change thespin speed of the set programme or select theavailable option(s).
Rinse hold
By selecting this function the water of the lastrinse is not emptied out to prevent the fabricsfrom creasing. Before opening the door it willbe necessary to empty out the water. To emptyout the water, please read the paragraph Atthe end of the programme.
Eco
Only for cottons and synthetic items lightly ornormally soiled at a temperature of 40C orhigher. The washing time will be prolonged andthe washing temperature will be reduced. Youcan use this option if you want to wash normallysoiled laundry and at the same time save ener-
gy.
Quick Wash
A very short cycle for lightly soiled items or forlaundry which needs only freshening up. Werecommend you to reduce the fabrics loading.
Extra Rinse
This appliance is designed to save energy. If itnecessary to rinse the laundry using an extra
quantity of water (extra rinse), select this option.Some additional rinses will be performed. Thisoption is recommended for people who are al-lergic to detergents, and in areas where thewater is very soft.
Drying Time
If you wish to carry out a timed drying pro-gramme, press this button until the drying time
you want appears on the display according tothe fabrics (cottons or synthetics) you have todry. For Cottons you can select a drying timefrom 10 minutes to 250 minutes (4.10). ForSynthetics you can select a drying time from 10minutes to 130 minutes (2.10). Every time youpress this button the drying time increases by 5mins.
Easy Iron
By selecting this option the laundry is gentlywashed and spun to avoid any creasing. In thisway ironing is easier. Furthermore the machinewill perform some additional rinses in someprogrammes. On cotton programmes the maxi-mum spin speed is reduced automatically.
Start PauseThis button allows you to start or to interruptthe selected programme.
Delay Start
The programme can be delayed from 30 min -60 min - 90 min, 2 hours and then by 1 hour upto a maximum of 20 hours by means of this but-ton.
Door light
The pilot light 9illuminates when the pro-gramme starts and indicates if the door can beopened:
light on: the door cannot be opened. Themachine is working or has stopped with wa-ter left in the tub.
light off: the door can be opened. The pro-gramme is finished or the water has beenemptied out.
light blinking: the door is opening in a fewminutes.
7www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
8/32
10 Display
10.1 10.2
The display shows the following information:
10.1 Child safety lock This device permits you to leave the appliance unattended during it's functioning.
10.2 Duration of the selected programmeAfter selecting a programme, the duration is displayed in hours and minutes (for example
). The duration is calculated automatically on the basis of the maximum recommendedload for each type of fabric. After the programme has started, the time remaining is updatedevery minute.
Selected drying timeAfter selecting a drying programme the drying time is shown in minutes or hours and minutes.After the programme has started, the time remaining is updated every minute.
Delayed startThe Selected delay set by pressing the relevant button appears on the display for a few sec-onds, then the duration of the selected programme is displayed again. The delay time valuedecreases by one unit every hour and then, when 1 hour remains, every minute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example(see paragraph What to do if...).
Incorrect option selectionIf an option which is not compatible with the set wash programme is selected, the messageErris displayed at the bottom of the display for a few seconds and the integrated red light ofbutton 7start flashing.
End of programme
When the programme has finished the flashing zero ( ) is displayed, the pilot light 9and the
pilot light of button 7go out and the door can be opened.
8
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
9/32
Washing programmes
ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics Load
Type of Laundry
OptionsDetergent
Compartment
Cottons
1234590- ColdMain wash - RinsesLong spin at maximum speed
Max. load 7 kg - Reduced load 3 kg 1)
For white and coloured cotton(normally soileditems).
SPINRINSE HOLD
ECO2)
SUPER QUICKEXTRA RINSEEASY IRON
Cottonswithprew
ash 6-78
90-40Prewash - Main wash - RinsesLong spin at maximum speed
Max. load 7 kg - Reduced load 3 kg 1)
For white or coloured cottonswith prewash phase(heavily soiled items).
SPINRINSE HOLD
ECOSUPER QUICKEXTRA RINSEEASY IRON
3)
Synth
etics
910111260- ColdMain wash - Rinses
Short spin at 900 rpmMax. load 3 kg - Reduced load 1,5 kg 1)
Synthetic or mixed fabrics:underwear, coloured gar-ments, non-shrink shirts, blouses.
SPINRINSE HOLD
ECO2)
SUPER QUICKEXTRA RINSEEASY IRON
Delicates
13141540- ColdMain wash - RinsesShort spin at 700 rpm
Max. load kg 3 - Reduced. load kg 1,5 1)
Delicate fabrics:acrylics, viscose, polyester.
RINSE HOLDSUPER QUICKEXTRA RINSE
16Jeans40Main wash - RinsesLong spin at 3 rpmMax. load 3 kgWith this programme it is possible to wash items likepants, shirts or jackets in denim and also jersey realizedwith hi-tech materials.(The Extra Rinse option will be activated automatically).
SPINRINSE HOLDEASY IRON
9www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
10/32
ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of Laundry
OptionsDetergent
Compartment
17-1819 Handwash40- ColdMain wash - RinsesShort spin at 900 rpmMax. load 2 kgSpecial programme for delicate fabrics with handwashing care symbol and machine washable wollens.
SPINRINSE HOLD
Dry
20CottonsDrying programme for cotton items
21Synthetics
Drying programme for synthetic items
Extra
22RinsesRinsesLong spin at maximum speedMax. load 7 kgWith this programme it is possible to rinse and spin cot-ton garments which have been washed by hand. Themachine performs 3 rinses, followed by a final long spin.The spin speed can be reduced.
SPINRINSE HOLDEXTRA RINSEEASY IRON
23DrainDraining of waterMax. load 7 kgFor emptying out the water of the last rinse in pro-grammes with the Rinse Hold option selected.
24SpinDrain and long spinLong spin at maximum speedMax. load 7 kgSeparate spin for hand washed garments and after pro-grammes with the Rinse Hold option selected. You canchoose the spin speed by pressing the relevant button
to adapt it to the fabrics to be spun.
SPIN
For cancelling the programme which is running or to switch the machine off .
1) If you select the Super Quick option by pressing button 3, we recommend that you reduce the maximumload as indicated. Full loading is possible however with somewhat reduced cleaning results.
2) This option can be selected at the temperature of 40C or higher only.3) If using liquid detergents, a programme without PREWASH must be selected.
10
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
11/32
Drying Programmes
Degree of Drying Type of Fabric Drying Load Spin SpeedSuggesteddrying timein Minutes
Ideal for towelling materials
Cotton and linen
(bathrobes, bath tow-els, etc)
4 kg
3 kg1.5 kg 1200
180 - 200
120 - 13085 - 95
Suitable for items to put away
without ironing1)
Cotton and linen(bathrobes, bath tow-
els, etc)
4 kg3 kg
1.5 kg1200
170 - 190110 - 120
75 - 85
Suitable for items to put awaywithout ironing
Synthetics andmixed fabrics
2 kg1 kg
900100 - 110
60 - 70
Suitable for ironingCotton and linen(sheets, tablecloths,
shirts, etc.)
4 kg3 kg
1.5 kg1200
140 - 16090 - 10060 - 70
1) In compliance with EC directive EN 50229 the cotton reference programme for the data entered in theEnergy Label must be tested dividing the maximum washing load by two equal parts and drying withDRYING TIME each of them.
Helpful hints and tips
Sorting out the laundry
Follow the wash code symbols on each gar-ment label and the manufacturers washing in-
structions. Sort the laundry as follows: whites,coloureds, synthetics, delicates, woollens.
Before loading the laundry
Never wash whites and coloureds together.Whites may lose their whiteness in the wash.New coloured items may run in the first wash;they should therefore be washed separately thefirst time.Button up pillowcases, close zip fasteners,
hooks and poppers. Tie any belts or long tapes.Remove persistent stains before washing.Rub particularly soiled areas with a special de-tergent or detergent paste.Treat curtains with special care. Remove hooksor tie them up in a bag or net.
Removing stains
Stubborn stains may not be removed by justwater and detergent. It is therefore advisable to
treat them prior to washing.
Blood:treat fresh stains with cold water. Fordried stains, soak overnight in water with a spe-cial detergent then rub in the soap and water.
Oil based paint:moisten with benzine stainremover, lay the garment on a soft cloth anddab the stain; treat several times.Dried grease stains:moisten with turpentine,lay the garment on a soft surface and dab thestain with the fingertips and a cotton cloth.Rust:oxalic acid dissolved in hot water or arust removing product used cold. Be carefulwith rust stains which are not recent since thecellulose structure will already have been dam-
aged and the fabric tends to hole.Mould stains:treat with bleach, rinse well(whites and fast coloureds only).Grass:soap lightly and treat with bleach(whites and fast coloureds only).Ball point pen and glue:moisten with ace-
tone1), lay the garment on a soft cloth and dabthe stain.Lipstick:moisten with acetone as above, then
treat stains with methylated spirits. Treat any re-sidual marks with bleach.
1) do not use acetone on artificial silk
11www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
12/32
Red wine:soak in water and detergent, rinseand treat with acetic or citric acid, then rinse.Treat any residual marks with bleach.Ink:depending on the type of ink, moisten the
fabric first with acetone1), then with acetic acid;treat any residual marks on white fabrics with
bleach and then rinse thoroughly.Tar stains:first treat with stain remover, me-thylated spirits or benzine, then rub with deter-gent paste.
Detergents and additives
Good washing results also depend on thechoice of detergent and use of the correctquantities to avoid waste and protect the envi-ronment.Although biodegradable, detergents containsubstances which, in large quantities, can up-set the delicate balance of nature.The choice of detergent will depend on thetype of fabric (delicates, woollens, cottons,etc.), the colour, washing temperature and de-gree of soiling.All commonly available washing machine deter-gents may be used in this appliance:
powder detergents for all types of fabric
powder detergents for delicate fabrics (60Cmax) and woollens
liquid detergents, preferably for low tempera-ture wash programmes (60C max) for alltypes of fabric, or special for woollens only.
The detergent and any additives must beplaced in the appropriate compartments of the
dispenser drawer before starting the wash pro-gramme.If using liquid detergents, a programme with-outprewash must be selected.Your appliance incorporates a recirculation sys-tem which allows an optimal use of the concen-trated detergent.Follow the product manufacturers recommen-dations on quantities to use and do not ex-ceed the MAX mark in the detergentdispenser drawer.
Quantity of detergent to be used
The type and quantity of detergent will dependon the type of fabric, load size, degree of soilingand hardness of the water used.Follow the product manufacturers instructions
on quantities to use.Use less detergent if:
you are washing a small load
the laundry is lightly soiled
large amounts of foam form during washing.
Degrees of water hardness
Water hardness is classified in so-called de-grees of hardness. Information on hardness of
the water in your area can be obtained from therelevant water supply company, or from your lo-cal authority. If the water hardness degree ismedium or high we suggest you to add a watersoftener following always the manufacturers in-structions. When the degree of hardness issoft, readjust the quantity of the detergent.
Drying Hints
Preparing the drying cycle
As a dryer, the appliance works on the conden-sation principle.Therefore, the water tap must be openand the drain hose must drain water intoa sink or into the drain pipe, even duringthe drying cycle.Attention!Before starting the drying programme, reduce
the loads of washed laundry, in order to obtaingood performances.
Laundry not suitable for drying
Particularly delicate items such as syntheticcurtains, woollen and silk, garments withmetal inserts, nylon stockings, bulky gar-ments such as anoraks, bed covers, quilts,sleeping bags and duvets must not be ma-chine dried.
Avoid drying dark clothes with light colouredfluffy items such as towels as these can at-
tract the fluff. Remove the laundry when the appliance has
finished drying.
12
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
13/32
To avoid a static charge when drying is com-pleted, use either a fabric softener when youare washing the laundry or a fabric condition-er specifically for tumble dryers.
Garments padded with foam-rubber or mate-rials similar to foam-rubber must not be ma-
chine dried; they represent a fire hazard. Also, fabrics containing residue of setting lo-
tions or hair sprays, nail solvents or similarsolutions must not be machine dried in orderto avoid the formation of harmful vapours.
The detergent and any additives must beplaced in the appropriate compartments of thedispenser drawer before starting the wash pro-gramme.If using liquid detergents, a programme with-
outprewash must be selected.Your appliance incorporates a re-circulationsystem which allows an optimal use of the con-centrated detergent.Follow the product manufacturers recommen-dations on quantities to use and do not ex-ceed the MAX mark in the detergentdispenser drawer.
Garment labels
For drying, follow the indications given on themanufacturers labels:
= May be tumble dried
= Drying at high temperature
= Drying at reduced temperature
= Do not tumble dry.
Drying cycle duration
The drying time may vary depending on: speed of the final spin
dryness degree required (iron dry, store dry)
type of laundry
weight of the load size .The average drying time for a timed drying areindicated in the Drying programmes chapter.The experience will help you to dry your laundryin a more suitable way, according to the differ-
ent fabrics. Take note of the duration dryingtime of the already performed cycles.
Additional drying
If the laundry is still damp at the end of the dry-ing programme, select a short drying cycleagain.
Warning!Do not over dry the laundryin order to avoid creasing of fabrics
or garments shrinking.
First use
Ensure that the electrical and waterconnections comply with the installationinstructions.
Remove the polystyrene block and any
material from the drum. Before the first wash, run a cotton cycle
at the highest temperature without any
laundry in the machine, to remove anymanufacturing residue from the drumand tub. Pour 1/2 a measure of deter-gent into the main wash compartmentand start the machine.
Personalisation
Acoustic signals
The machine is provided with an acoustic de-vice, which sounds in the following cases:
at the end of the cycle
if there is a fault.By pressing the 4and 5buttons simultaneouslyfor about 6 seconds, the acoustic signal is de-
activated (except if there is a fault). By pressingthese 2 buttons again, the acoustic signal is re-activated.
Child safety lock
This device permits you to leave the applianceunattended so you do not need to worry thatchildren might be injured by or cause damage
13www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
14/32
to the appliance. This function remains enabledalso when the washing machine is not working.There are two different ways to set this option:
1. Before pressing button 7: it will be impos-sible to start the machine.
2. After pressing button 7: it will be impossi-
ble to change any other programme or op-tion.
To enable or disable this option press simulta-neously for about 6 seconds buttons 2and 3
until on the display, the icon appears or dis-appears.
Daily Use
Load the laundry
Open the door bycarefully pulling thedoor handle out-
wards. Place thelaundry in the drum,one item at a time,shaking them out asmuch as possible.Close the door.
Make sure that nolaundry stays be-tween the seal andthe door. There is arisk of water leakageor damage to thelaundry.
Measure out the detergent and the fabricsoftener
Pull out the dispenser drawer until it stops.Measure out the amount of detergent re-quired, pour it into the main wash compart-
ment or in the appropriate compartment if
the selected programme/option it requires(see more details in "Detergent dispenserdrawer").If required, pour fabric softener into the com-
partment marked (the amount used mustnot exceed the MAX mark in the drawer).Close the drawer gently.
Select the required programme by meansof the programme selector dial (1)
Turn the programme selector dial to the re-quired programme.The green pilot light of button 7starts to flash.The selector dial can be turned either clockwiseor anticlockwise.Turn the selector dial to position to reset theprogramme/to switch the machine OFF.At the end of the programme the selector
dial must be turned to position , toswitch the machine off.
Important!If you turn the programme selectordial to another programme when the machine isworking, the red pilot light of button 7will blink3 times and the messageErris displayed toindicate a wrong selection. The machine willnot perform the new selected programme.
Select the spin speed by pressing button2
When selecting a programme, the applianceproposes automatically the maximum spinspeed provided for that programme. (See
14
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
15/32
"Washing programmes" for the maximum al-lowed spin speed).Press this button repeatedly to change the spinspeed, if you want your laundry to be spun at adifferent speed. The relevant pilot light illumi-nates.
Select the available options by means ofbuttons 3, 4 and 6
Depending on the programme, different optionscan be combined. These must be selected afterchoosing the desired programme and beforestarting the programme. When these buttonsare pressed, the corresponding pilot lights illu-minate. When they are pressed again, the pilotlights go out. If an incorrect option is selected,the integrated redpilot light of the button 7
flashes 3 times and the message Erris dis-played.For the compatibility among the washing pro-grammes and the options see chapter Wash-ing programmes.
Start the programme by pressing button 7
To start the selected programme, press thisbutton; the corresponding green pilot lightstops blinking.
The pilot light 9illuminates to indicate that theappliance starts operating and the door islocked.If you have chosen a delayed start, the machinewill begin the countdown.
Important!If an incorrect option is selected,the message Erris displayed for a few secondsand the redpilot light of this button blinks 3times.
Select the Delay Start by pressing button8
Before you start the programme, if you wish todelay the start, press this button to select thedesired delay.The selected delay time value will appear onthe display for a few seconds, then the durationof the programme will appear again.You must select this option after you have set
the programme and before you start the pro-gramme.You can cancel or modify the delay time at anymoment, before you press button 7.
Selecting the delay start :
1. Select the programme and the requiredoptions.
2. Select the delay start by pressing button 8.
3. Press button 7:- the machine starts its hourly countdown.
- the programme will start after the selec-ted delay has expired.
Cancelling the Delay Start after having startedthe programme:
1. Set the washing machine to PAUSE bypressing button 7.
2. Press button 8once. On the display willappear '.
3. Press button 7again to start the pro-
gramme.
Important! The selected delay can be changed only af-
ter selecting the washing programme again.
The door will be locked throughout the delaytime. If you need to open the door, you mustfirst set the washing machine to PAUSE bypressing button 7and wait a few minutes be-fore opening the door. After you have closed
the door, press the same button again.
Important!The Delay Start cannotbeselected with the draining programme.
Altering an option or a runningprogramme
It is possible to change some options beforethe programme carries them out.Before you make any change, you must pause
the washing machine by pressing button 7.Changing a running programme is possible onlyby resetting it. Turn the programme selector di-
al to and then to the new programme posi-tion. Start the new programme by pressing but-ton 7again.The washing water in the tub will be not emp-tied out.
Interrupting a programme
Press the button 7to interrupt a programmewhich is running, the corresponding pilot lightstarts blinking. Press the button again to re-startthe programme.
15www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
16/32
Cancelling a programme
Turn the selector dial to to cancel a pro-gramme which is running. Now you can select anew programme.
Opening the door after the programmehas started
First set the machine to pause by pressing thebutton 7.If the pilot light 9blinks and after a few minutesgoes off, the door can be opened.If the pilot light 9remains lit, this means that themachine is already heating or that the water lev-el is too high. In any case, do not try to forcethe door open!If you cannot open the door but you need to
open it, you have to switch the machine off byturning the selector dial to . After a few mi-nutes the door can be opened.(Pay attention to the water level and tem-perature!).After closing the door, it is necessary to selectthe programme and options again and to pressbutton 7.
At the end of the programme
The machine stops automatically. The blinking
appears on the display, the pilot light of but-ton 7and the pilot light 9go off.
If a programme or an option that ends with wa-ter left in the tub has been selected, the pilotlight 9remains on and the door is locked to in-dicate that the water must be emptied out be-fore opening the door.Before you empty out the water, the drum con-tinues to run at regular intervals until the waterdraining.Follow the below instructions to empty out thewater:
1. Turn the programme selector dial to .
2. Select the draining or spinning programme.
3. Reduce the spin speed if needed, bypressing the relevant button.
4. Press button 7.
At the end of the programme, the door is re-leased and can be opened. Turn the pro-gramme selector dial to to switch the ma-chine off.Remove the laundry from the drum and carefullycheck that the drum is empty. If you do not in-tend to carry out another wash, close the watertap. Leave the door open to prevent the forma-tion of mildew and unpleasant smells.
Use - Drying
Drying only
The recommended load size is 3 kg forcottons and linen and 2 kg for synthetic
items.
By pressing Drying Timebutton it is also pos-sible to dry up to 4 kg of cotton items (see theDrying Programme table).
Caution!The water tap must be open andthe drain hose must be positioned in the
sink or connected to the drain pipe.
1. Load the laundry.
2. Set the spin programme at the maximumspin speed allowed for the type of laundryto remove any residual moisture and obtainthe best drying performances.
3. Set the drying programme for Cottons orSynthetic in the Drying sector of the pro-gramme selector dial.
4. Set the drying time by pressing button 5
until the time you want appears on the dis-play (see the Drying Programme table).Every time you press this button the dryingtime increases by 5 minutes.
The programme time will automatically in-crease by some minutes.
5. Press button 7to start the programme. Thetime remaining is updated every minute.
6. At the end of the programme, the buzzersounds. The blinking appears on the dis-play. The door pilot light 9is on.
16
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
17/32
During the last minutes of the drying cyclethe appliance performs an anti-creasephase. Through this time the door is
locked. The display shows the blinking .At the end of the anti-crease phase thedoor pilot light 9is off.
If you wish to open the door before or dur-ing the anti-crease phase or to interrupt it,
press any button or turn the programme selec-
tor dial to any programme position (except ).
7. Turn the selector dial to the position toswitch the machine off.
8. Remove the laundry from the drum.
The different type of cottons (towelling,
sheets, shirts, and so on) or any laundryitems rolling up during the spinning phase mayresult in partial dryness. In the exceptional casethat at the end of the cycle the laundry remainsslightly wet, we suggest that you unfold the rol-led up items, redistribute them evenly in thedrum and select an additional drying cycle of20-30 minutes.
If you set only 10 minutes of drying phasewith the drying time button (5), the appli-
ance performs only a cooling phase.
NON-STOP programme - Washing andTimed Drying
The recommended load size is 3 kg for cottonand 2 kg for synthetic.
It is also possible to dry up to 4 kg of cot-ton items (see the Drying Programme
table).
Caution!Do not use a dosing device/ball when carrying out a washing and
drying programme.
1. Load the laundry and add detergent andfabric softener.
2. Switch the machine on by turning the se-lector dial to the set washing programme/
fabric.3. Select the required options by pressing the
relevant buttons.
If possible, do not select a spinspeed lower than that proposed by
the appliance to avoid too long a dryingtime therefore saving energy.
In any case the reduction of the spin speedis only possible after selecting drying.
The lowest values you can select are 900r.p.m. for cottons and synthetics and 700r.p.m. for delicate fabrics.
4. Set the drying time by pressing button 5.The display shows the whole duration ofthe washing and the set drying cycle.
If you set a washing programme and only10 minutes of drying cycle, the total dura-
tion displayed includes also the unrolling and
the cooling phase.
5. Start the programme by pressing button 7.The time remaining is updated every minuteon the display.
6. At the end of the programme turn the se-lector dial to the position to switch themachine off and remove the laundry.
Fluff in the garments
During the WASHING AND/OR DRYINGPHASE, certain types of fabric, as sponge-cloth, wool, sweatshirt, could release fluff.The released fluff could stick to the fabrics dur-ing the next cycle.This drawback increases with technical fabrics.To prevent the lint in your clothes, it is recom-mended:
To do not wash dark fabrics after you wash-ed and dried light colored fabrics (newsponge, wool, sweatshirt especially) and viceversa.
To air-dry this type of fabrics when they arewashed the first time.
To clean the filter.
Perform one or more rinse cycles to wash thedrum between the washing and drying offabrics with different colors.
After the drying phase, thoroughly clean theempty drum, the gasket and the door with awet rag.
17www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
18/32
8/10/2019 Zanussi Zwt71201wa
19/32
When no more water comes out, unscrew thepump cover by turning it anti-clockwise andremove the filter. Use pliers, if necessary. Al-ways keep a rag nearby to dry up any waterspillage when removing the cover.Clean the filter under a tap, to remove anytraces of fluff.
Remove foreign bod-ies and fluff from thefilter seat and fromthe pump impeller.Check carefullywhether the pump im-peller rotates (it ro-tates jerkily). If itdoesnt rotate, pleasecontact your ServiceCentre.
Put the cap back onthe emergency emp-tying hose and placethe latter back in itsseat.Replace the filter intothe pump by insertingit correctly into the
special guides.Screw the pump cov-er firmly by turning itclockwise.
Caution!When the appliance is in useand depending on the programme
selected there can be hot water in the pump.Never remove the pump cover during a wash
cycle, always wait until the appliance hasfinished the cycle, and is empty. When refittingthe pump cover, ensure it is securely re-
tightened so as to stop leaks and youngchildren being able to remove it.
Cleaning the water inlet filters
Important!If the appliance doesn't fill, takeslong to fill with water, the starting button blinks
yellow or the display (if available) shows therelevant alarm (see chapter "What to do if..." formore details), check if the water inlet filters areblocked .
To clean the water inlet filters:
Turn off the watertap.
Unscrew the hose
from the tap. Clean the filter in
the hose with a stiffbrush.
Screw the hose back onto the tap. Makesure the connection is tight.
Unscrew the hose from the machine. Keepa rag nearby because some water mayflow.
Clean the filter in the valve with a stiffbrush or with the piece of cloth.
35 45
19www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
20/32
Screw the hose back to the machine andmake sure the connection is tight.
Turn on the water tap.
Frost precaution
If the machine is exposed to temperatures be-low 0C, certain precautions should be taken.
Turn off the water tap.
Unscrew the inlet hose.
Place the end of the emergency emptyinghose and that of the inlet hose in a bowlplaced on the floor and let water drain out.
Screw the water inlet hose back on and re-position the emergency emptying hose afterhaving put the cap on again.
When you intend to start the machine upagain, make sure that the room temperatureis above 0C.
Emergency emptying out
If the water is not discharged, proceed as fol-lows to empty out the machine:
pull out the plug from the power socket;
close the water tap;
if necessary, wait until the water has cooleddown;
open the pump door;
place a bowl on the floor and place the endof the emergency emptying hose into thebowl. Remove its cap. The water should
drain by gravity into the bowl. When the bowlis full, put the cap back on the hose. Emptythe bowl. Repeat the procedure until waterstops flowing out;
clean the pump if necessary as previouslydescribed;
replace the emergency emptying hose in itsseat after having plugged it;
screw the pump cover again and close the
door.Important!Every time you drain the waterthrough the emergency emptying hose youmust pour 2 litres of water into the main washcompartment of the detergent drawer and thenrun the drain programme. This will activate theECO Valvedevice avoiding that part of thedetergent remains unused at next washing.
What to do if
Certain problems are due to lack of simplemaintenance or oversights, which can besolved easily without calling out an engineer.Before contacting your local Service Centre,please carry out the checks listed below.During machine operation it is possible that theredpilot light of button 7blinks, one of the fol-
lowing alarm codes appears on the display andsome acoustic signals sound every 20 secondsto indicate that the machine is not working:
: problem with the water supply.
: problem with the water draining.
: door open.Once the problem has been eliminated, pressthe button 7to restart the programme. If afterall checks, the problem persists, contact your
local Service Centre.
20
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
21/32
Problem Possible cause/Solution
The machine does not start:
The door has not been closed.
Close the door firmly.The plug is not properly inserted in the power socket.
Insert the plug into the power socket.There is no power at the socket.
Please check your domestic electrical installation.The main fuse has blown.
Replace the fuse.The selector dial is not correctly positioned and the button 7has notbeen pressed.
Please turn the selector dial and press the button 7again.The delay start has been selected.
If the laundry are to be washed immediately, cancel the delay start.The Child Safety Lock has been activated.
Deactivate the Child Safety Lock.
The machine does not fill:
The water tap is closed.
Open the water tap.
The inlet hose is squashed or kinked.
Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked.
Clean the water inlet filters. (See "Cleaning the water inlet filters" formore details).
The door is not properly closed.
Close the door firmly.
The machine does not emptyand/or does not spin:
The drain hose is squashed or kinked.
Check the drain hose connection.
The drain filter is clogged.
Clean the drain filter.An option or a programme that ends with the water still in the tub or athat eliminates all the spinning phases has been selected.
Select the draining or spinning programme.The laundry is not evenly distributed in the drum.
Redistribute the laundry.
21www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
22/32
Problem Possible cause/Solution
There is water on the floor:
Too much detergent or unsuitable detergent (creates too much foam)has been used.
Reduce the detergent quantity or use another one.Check whether there are any leaks from one of the inlet hose fittings. It isnot always easy to see this as the water runs down the hose; check to
see if it is damp. Check the water inlet hose connection.The drain or inlet hose is damaged.
Replace it with a new one.The emergency emptying cap has not been replaced into the filter or thefilter has not been properly screwed in after cleaning action.
Refit the emergency emptying cap into the filter or screw the filter fullyin.
Unsatisfactory washing re-sults:
Too little detergent or unsuitable detergent has been used.
Increase the detergent quantity or use another one.
Stubborn stains have not been treated prior to washing.
Use commercial products to treat the stubborn stains.The correct temperature was not selected.
Check if you have selected the correct temperature.Excessive laundry load.
Reduce the laundry load.
The door will not open:
The programme is still running.
Wait the end of washing cycle.The door lock has not been released.
Wait until the pilot light 9 goes off.There is water in the drum.
Select drain or spin programme to empty out the water.
The machine vibrates isnoisy:
The transit bolts and packing have not been removed.
Check the correct installation of the appliance.The support feet have not been adjusted
Check the correct levelling of the appliance.The laundry is not evenly distributed in the drum.
Redistribute the laundry.Maybe there is very little laundry in the drum.
Load more laundry.
Spinning starts late or themachine does not spin:
The electronic unbalance detection device has cut in because the laun-dry is not evenly distributed in the drum. The laundry is redistributed byreverse rotation of the drum. This may happen several times before theunbalance disappears and normal spinning can resume. If, after 10 mi-nutes, the laundry is still not evenly distributed in the drum, the machinewill not spin. In this case, redistribute the load manually and select thespin programme.
Redistribute the laundry.The load is too small.
Add more items, redistribute the load manually and then select thespinning programme.
22
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
23/32
Problem Possible cause/Solution
The machine does not dry ordoes not dry properly:
The drying time has not been selected.
Select the drying time.
The water tap is not turned on.
Open the water tap.
The drain filter is clogged.
Clean the drain filter.The machine is overloaded.
Reduce the laundry load.The selected drying time or the drying programme was not suitable forthe laundry.
Select the suitable drying time/programme for the laundry.
The laundry is full of differ-ent coloured fluff:
The fabrics washed in the previous cycle released fluff of a different col-our (refer to Fluff in the garments in chapter Use - Washing & Drying).
The drying phase helps to eliminate some fluff.
Clean the clothes with a fluff remover.In case of an excessive amount of fluff in the drum repeat the followingprocedure twice:
Thoroughly clean the empty drum, the gasket and the door with a wetrag.
Perform a rinse cycle.
Put a wool or piled fabric rag inside the drum.
Perform a drying cycle of 10 minutes.
Remove the old wool cloth.Now you can wash other garments.
The machine makes an un-usual noise:
The machine is fitted with a type of motor which makes an unusual noisecompared with other traditional motors. This new motor ensures a softerstart and more even distribution of the laundry in the drum when spin-ning, as well as increased stability of the machine.
No water is visible in thedrum:
Machines based on modern technology operate very economically usingvery little water without affecting performance.
If you are unable to identify or solve the prob-lem, contact our service centre. Before tele-
phoning, make a note of the model, serial num-ber and purchase date of your machine: theService Centre will require this information.
Mod. ... ... ...Prod. No. ... ... ...
Ser. No. ... ... ...
Mod
..........
Prod
.No.
........
Ser.No
..........
Technical data
Dimensions WidthHeightDepth
60 cm85 cm55 cm
23www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
24/32
Electrical connectionVoltage - Overall power - Fuse
Information on the electrical connection is given on the rating plate, onthe inner edge of the appliance door.
Water Supply Pressure MinimumMaximum
0,05 MPa0,8 MPa
Maximum Load Cotton 7 kg
Maximum Dry Load CottonCotton Big CapacitySynthetic
3 Kg4 Kg2 Kg
Spin Speed Maximum 1200 rpm
Consumption values
Programme Energy consumption(KWh)
Water consumption(litres)
Programme duration(Minutes)
Cottons 60 1.35 67 For the duration ofthe programmes,please refer to the
display on the controlpanel.
Cotton Energy Saving
Programme 60 1)1.05 49
Cottons 40 0.85 67
Synthetics 40 0.55 42
Delicates 40 0.55 63
Wool/ Handwash 30 0.25 55
1) Cotton Energy Saving programme at 60C with a load of 7 kg is the reference programme for the dataentered in the energy label, in compliance with EEC 92/75 standards.
The consumption data shown on this chart is to be considered purely indicative, as it may varydepending on the quantity and type of laundry, on the inlet water temperature and on the am-
bient temperature.
Installation
Unpacking
All transit bolts and packing must be removedbefore using the appliance.You are advised to keep all transit devices sothat they can be refitted if the machine ever hasto be transported again.
24
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
25/32
After removing all thepackaging, carefullylay machine on it'sback to remove thepolystyrene basefrom the bottom.
Remove the powersupply cable and thehose from the hoseholders on the rear ofthe appliance.
Unscrew the threebolts with the sup-plied spanner.
Slide out the relevantplastic spacers.
Fill the smaller upper hole and the two large
ones with the corresponding plastic plugcaps supplied in the bag containing the in-struction booklet.
Positioning
Install the machine on a flat hard floor. Makesure that air circulation around the machine isnot impeded by carpets, rugs etc. Check thatthe machine does not touch the wall or otherkitchen units.
Level the washingmachine by raising orlowering the feet. Thefeet may be tight toadjust as they incor-porate a self locking
nut, but the machineMUSTbe level andstable. If necessary,check the setting witha spirit level.
Any necessary ad-justment can bemade with a spanner.
Accurate levelling prevents vibration, noise anddisplacement of the machine during operation.
Caution!Never place cardboard, wood orsimilar materials under the machine to
compensate for any unevenness in the floor.After having levelled the appliance, tighten thelock nuts.
Raising the appliance
Suspended wooden floors are particularly sus-ceptible to vibration.To help prevent vibration we recommend youplace a waterproof wood panel, at least 15 mmthick under the appliance, secured to at least 2floor beams with screws, the wood panel mustextend beyond the front feet.If possible install the appliance in one of thecorners of the room, where the floor is morestable.
Water inlet
25www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
26/32
Caution! This appliance must be connected
to a cold water supply.
Before connecting up the appliance tonew pipework or to pipework that hasnot been used for some time, run off a
reasonable amount of water to flush outany debris that may have collected.
Do not use the hose from your previousappliance to connect to water supply.
The inlet hose is supplied with the applianceand can be found inside the machine drum.
35 45
Open the porthole and extract the inlet hose.Connect the appropriate end of the hose tothe appliance with the angled connection asshowed in the picture. Do not place the in-let hose downwards.Angle the hose to theleft or right depending on the position of yourwater tap.After positioning the inlet hose, be sure totighten the ring nut again to prevent leaks .
Connect the otherend of the inlet hoseto a tap with a 3/4thread. Always use
the hose suppliedwith the appliance.
Caution!The inlet hose must not belengthened. If it is too short and you do not
wish to move the tap, you will have to purchasea new, longer hose specially designed for this
type of use.
Warning!Installation should complywith local water authority and
building regulations requirements.The appliance must be connected to acold water supply.A minimum water pressure of 0.05 MPa (0.5
bar) is required for safe operation of theappliance.If you cannot make the cold water connectiondirect from the rising mains, you may be able tooperate the appliance from your cold waterstorage system.There should be a minimum vertical distance of5.02 m (16.5 ft) between the appliances inletand the bottom of the water storage tank.
Water drainage
This appliance is designed to be permanentlyplumbed into your home's drainage system us-ing one of the following methods.1. Into a drainage standpipe.
Firstly form a hook in the end of the drainhose using the U piece supplied.
U piece supplied
Place the drain hose into your standpipe,which should have an internal diameter of ap-proximately 38 mm thus ensuring there is an
air break between the drain hose and stand-pipe.When discharging into a standpipe ensurethat the top of the standpipe is no more than90 cm (35.4'') and no less than 60 cm (23.6'')above floor level.
26
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
27/32
38 mm (1.5)
standpipe
diamater30 cm (12)
The drain hose may be extended to a maxi-mum of 4 metres. An additional drain hoseand joining piece is available from your localService Force Centre. The joining piece musthave an internal diameter of 18 mm.
Min. 60 cm (23.6) Max. 90 cm (35.4)
If your drain hoselooks like this (seebeside) you do not
require the Upiece. Just push thehose firmly in to thestandpipe.
2. Onto a sink outlet spigot.
Loop
If the outlet spigothas not been usedbefore, remove anyblanking plug thatmay be in place.
Push the drain hoseonto the spigot andsecure with a clip,ensure a loop isformed in the drainhose (see above) to
prevent waste fromthe sink entering theappliance.
If you intend to drain the hose from the ma-chine into a sink, make sure that the sink isempty and the plug hole is not blocked. Usethe plastic U - Piece supplied.
In the interest of the environment
The appliance should be connected to theFOUL drainage system, the water will then betaken to a sewage works for treatment beforebeing discharged safely into a river.It is essential that these appliances are not con-nected to the surface water drainage system asthis water is discharged directly into a river orstream and may cause pollution.If you require any further advice please contactyour local water authority.
SHOWER
WASHING
MACHINE DISHWASHER
BATHSINK TOILET
BIDET
RAINWATER
RUN-OFF
SURFACE WATER
DRAINS & SEWERS
UNTREATED
DISCHARGE
RIVER RIVER
TREATED DISCHARGE
FOUL DRAIN
FOUL SEWERS
SEWAGE TREATMENT
WORKS
27www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
28/32
Building in
This appliance has been designed to be builtinto the kitchen furniture. The recess shouldhave the dimensions shown in picture A.
A
600
596 555
170
75
176,5
416
100
60
818
min.
820
min.
560
When installing the appliance into the kitchenfurniture ensure, if possible, the hoses areplaced in either of the two recesses on theback of the appliance.This will help to prevent the hoses from be-coming kinked or trapped.
B
1
2
3
7 5
6
4
8
Caution!Do not remove the screw 8!
Preparation and assembly of the door
The machine is originally prearranged for theassembly of a door opening from right to left.In this case it is sufficient to screw in thehinges (1) and the counter-magnet (6) provi-ded with the appliance, at the right level (Fig.B).
C
16-22
595-598
221,5
416
B
C
35 12,5-14 depth
28
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
29/32
a) DoorThe dimensions of the door should be:- width 595-598 mm- thickness 16-22 mmThe height (C-Fig. C) depends on the heightof the adjacent furniture's base.
b) HingesTo mount the hinges it is necessary to drilltwo holes (dia. 35 mm, depth 12.5-14 mmdepending on the depth of door furniture) onthe inner side of the door. The distance be-tween the holes hobs fixing centres must be416 mm.The distance (B) from upper edge of the doorto the centre of the hole depends on the ad-jacent furniture's dimensions.The required dimensions are given in the pic-ture C.The hinges will be fixed to the door by meansof screws for wood (2-Fig. B) supplied withthe appliance.
c) Mounting the doorFix the hinges (1) to the machine by means ofthe M 5x15 screws (3-Fig. B). The hingescan be adjusted to compensate for possible
uneven thickness of the door.To align the door perfectly it is necessary toloosen the screw (3-Fig. B), adjust the doorand tighten the screw again.
D
4
6
8
Caution!Do not remove the screw 8!
d) Counter-magnet (6)The appliance is prearranged for a magneticclosure of the door.To enable a correct operation of this device, itis necessary to screw the counter-magnet (6)(steel disk + rubber ring) into the inner sideof the door. Its position must correspond tothe magnet (4) on the appliance (see pictureD).
E
1
2
3
7
5
6
4
8
Caution!Do not remove the screw 8!
If the door has to be opened from left to right,invert the position of the plates (7), the mag-net (4) and the plate (5) (Fig. Band E).Mount the counter-magnet (6) and the hinges
(1) as previously described.
Recommendations regarding the con-struction and fitting of a base when theinstallation requires an integrated appli-ance to be raised.
29www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
30/32
Graphic F
Front view
5 mm Hardwood strip
Additional pieces
of timber should run
from front to back
40
600-605
100
Where the appliance has been raised bymounting onto a wooden base provided bythe installer. The material used to constructthe base should have anon slip surface, bewater repellent and if possible be one solidpiece.
If it is not possible to use one solid piece, dueto the additional height required, ensure thatany additional strips of timber are glued andscrewed to the underside of the base (seeFig. F).
Graphic G
Top viewFront edge
600-605
490
95
50
Drill four fixing holes see Fig. GPosition the base into the recess with its frontedge as far forward as the adjoining plinthline will allow.The reason for placing the base in thisposition is to allow a small strip of
beading to be fitted in front of the appli-ance feet.
Graphic H
600-605
490
5 x 25 x 605
Hardwood strip5 mm x 25 mm
Fix the base firmly to the floor using four ap-propriate countersunk screws (see Fig. H).With the appliance installed adjust all fourfeet ensuring the machine is stable, and aclearance of approximately 5 mm is left be-tween the top of the machine and the under-side of the worktop.
A final check for stability should be carriedout with the machine on spin with a load, thiswill identify the need for any further fine ad-justment to the feet.
A strip of beading approximately 605 mm W,x 5 mm H, x 25 mm D must be screwed downinto the base directly in front of the machinesfeet, this will provide additional security.If required an additional door magnet, partnumber 1242394-00/3 and disc, part num-
ber 1242393-00/5 are available from spareparts.
30
www.zanussi.com
8/10/2019 Zanussi Zwt71201wa
31/32
Electrical connection
Information on the electrical connection is givenon the rating plate on the inner edge of the ap-pliance door.Check that your domestic electrical installation
can take the maximum load required, also tak-ing into account any other appliances in use.
Caution!Connect the machine to anearthed socket.
Warning!The appliance is supplied witha 13amp plug fitted. In the event of having
to change the fuse in the plug supplied, a13amp ASTA approved (BS1363/A) fuse must
be used.
Caution!The manufacturer does notaccept any responsibility for damage
or injury through failure to comply with
the above safety precaution.
Caution!Should the appliance powersupply cable need to be replaced,
this MUST be carried out by a ServiceCentre.
The power supply cable must be easi-ly accessible after installing the ma-
chine.
Environment concerns
The symbol on the product or on itspackaging indicates that this product may notbe treated as household waste. Instead itshould be taken to the appropriate collectionpoint for the recycling of electrical and
electronic equipment. By ensuring this productis disposed of correctly, you will help preventpotential negative consequences for theenvironment and human health, which couldotherwise be caused by inappropriate wastehandling of this product. For more detailedinformation about recycling of this product,please contact your local council, yourhousehold waste disposal service or the shopwhere you purchased the product.
Packaging materials
The materials marked with the symbol arerecyclable.>PEPSPP
8/10/2019 Zanussi Zwt71201wa
32/32
www.zanussi.com/shop
1329
27931-A-462012
Top Related