Omrekentabel DIN ➔ INCH ➔ MM Blz. 48Pijpafmetingen volgens DIN Blz. 49 t/m 51Voorlasflens volgens DIN Blz. 52 t/m 57Overschuifflens volgens DIN Blz. 58 t/m 64Blindflens volgens DIN Blz. 65 t/m 69Lasbocht volgens DIN Blz. 70 t/m 72Las T-stuk volgens DIN Blz. 73Las verloopstuk volgens DIN Blz. 74Bolle bodems volgens DIN Blz. 75Zadelstuk volgens DIN Blz. 76Inlasbocht volgens DIN Blz. 77
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Dimensions of Welded and Seamless Steel Pipe ANSI B 36.10 Dim
5
44626_Fittersboekje 05-01-2007 11:06 Pagina 7
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Dimensions of Welded and Seamless Steel Pipe ANSI B 36.10
6
44626_Fittersboekje 05-01-2007 11:06 Pagina 8
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Dimensions of Welded and Seamless Steel Pipe ANSI B 36.10
7
Dim
44626_Fittersboekje 05-01-2007 11:07 Pagina 9
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
8
Dimensions of Welded and Seamless Steel Pipe ANSI B 36.10
44626_Fittersboekje 05-01-2007 11:07 Pagina 10
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Dimensions of Welded and Seamless Steel Pipe ANSI B 36.10
9
Dim
44626_Fittersboekje 05-01-2007 11:07 Pagina 11
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
10
Dimensions of Welded and Seamless Steel Pipe ANSI B 36.10
44626_Fittersboekje 05-01-2007 11:07 Pagina 12
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Dimensions of Welded and Seamless Steel Pipe ANSI B 36.10
11
Dim
44626_Fittersboekje 05-01-2007 11:07 Pagina 13
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
12
Dimensions of Welded and Seamless Steel Pipe ANSI B 36.10
44626_Fittersboekje 05-01-2007 11:07 Pagina 14
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Dimensions of Welded and Seamless Steel Pipe ANSI B 36.10
13
We
44626_Fittersboekje 05-01-2007 11:07 Pagina 15
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Welding-Neck flens ANSI B16.5
14
44626_Fittersboekje 05-01-2007 11:07 Pagina 16
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
ANSI
15
AN
44626_Fittersboekje 05-01-2007 11:07 Pagina 17
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
ANSI
16
44626_Fittersboekje 05-01-2007 11:07 Pagina 18
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
ANSI
17
AN
44626_Fittersboekje 05-01-2007 11:07 Pagina 19
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
ANSI
18
44626_Fittersboekje 05-01-2007 11:07 Pagina 20
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
ANSI
19
AN
44626_Fittersboekje 05-01-2007 11:07 Pagina 21
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
ANSI
20
44626_Fittersboekje 05-01-2007 11:07 Pagina 22
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Afmetingen van brilflenzen en steekplaten zacht staal en legeringsstaal
21
Afmetingen in milimeters
Bril flens
Steek plaat
Bri
44626_Fittersboekje 05-01-2007 11:07 Pagina 23
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
22
Bril flenzen
44626_Fittersboekje 05-01-2007 11:07 Pagina 24
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
23
Bril flenzen Ste
44626_Fittersboekje 05-01-2007 11:07 Pagina 25
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
24
Steek platen
44626_Fittersboekje 05-01-2007 11:07 Pagina 26
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
25
Steek platen La
44626_Fittersboekje 05-01-2007 11:07 Pagina 27
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
26
Lab joint stub ends ANSI
44626_Fittersboekje 05-01-2007 11:07 Pagina 28
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Bo
27
ANSI
44626_Fittersboekje 05-01-2007 11:07 Pagina 29
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
28
Bouten t.b.v. ANSI voorlasflenzen
44626_Fittersboekje 05-01-2007 11:07 Pagina 30
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
29
Bouten t.b.v. ANSI voorlasflenzen Bo
44626_Fittersboekje 05-01-2007 11:07 Pagina 31
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
30
Bouten t.b.v. ANSI voorlasflenzen
44626_Fittersboekje 05-01-2007 11:07 Pagina 32
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
31
Bouten t.b.v. ANSI voorlasflenzen Bo
44626_Fittersboekje 05-01-2007 11:07 Pagina 33
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
32
Bouten t.b.v. ANSI voorlasflenzen
44626_Fittersboekje 05-01-2007 11:07 Pagina 34
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
33
Vergelijking Studbolts - Machinebouten Vla
44626_Fittersboekje 05-01-2007 11:07 Pagina 35
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Vlakke pakkingen
34
44626_Fittersboekje 05-01-2007 11:07 Pagina 36
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
35
RTJ pakkingen voor ASA flenzen RT
44626_Fittersboekje 05-01-2007 11:07 Pagina 37
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
RTJ pakkingen voor ASA flenzen
36
44626_Fittersboekje 05-01-2007 11:07 Pagina 38
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Caps ANSI B16.9
nominal outside wall thickness length DISH weightpipe size diameter s radius kg
D STD XS H R STD XS
1/2” 21.34 2.80 3.65 25 13.7 0.032 0.041
3/4” 26.67 2.95 3.95 25 18.3 0.059 0.073
1” 33.50 3.40 4.55 38 23.4 0.10 0.13
1 1/4” 42.16 3.55 4.85 38 34.3 0.14 0.18
1 1/2” 48.26 3.70 5.10 38 35.8 0.17 0.22
2” 60.33 3.90 5.55 38 46.0 0.23 0.30
2 1/2” 73.03 5.20 7.10 38 54.6 0.37 0.46
3” 88.90 5.45 7.60 51 68.3 0.64 0.84
3 1/2” 101.60 5.70 8.15 64 79.0 0.96 1.28
4” 114.30 5.95 8.50 64 89.4 1.16 1.55
5” 141.30 6.45 9.55 76 112.3 1.91 2.61
6” 168.28 7.10 11.05 89 134.9 2.91 4.19
8” 219.08 8.25 12.70 102 177.3 5.13 7.40
37
Ca
npi
44626_Fittersboekje 05-01-2007 11:07 Pagina 39
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Caps ANSI B16.9
nominal outside wall thickness length DISH weightpipe size diameter s radius kg
D STD XS H R STD XS
10” 273.00 9.27 12.70 127 222.8 9.08 11.9
12” 323.85 9.53 12.70 152 266.7 13.4 17.3
14” 355.60 9.53 12.70 165 294.6 16.0 20.8
16” 406.40 9.53 12.70 178 338.8 20.1 26.1
18” 457.20 9.53 12.70 203 383.0 25.9 33.9
20” 508.00 9.53 12.70 229 427.7 32.5 42.6
22” 558.60 9.53 12.70 254 472.4 39.3 52.2
24” 609.60 9.53 12.70 267 516.6 46.3 60.8
26” 660.40 9.53 12.70 267 561.3 46.3 65.8
30” 762.00 9.53 12.70 267 650.2 56.7 79.4
34” 863.60 9.53 12.70 267 739.1 72.6 95.3
36” 914.40 9.53 12.70 267 783.6 79.4 107
42” 1066.80 9.53 12.70 305 916.9 104.0 136
38
44626_Fittersboekje 05-01-2007 11:07 Pagina 40
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Lasbochten vlgs ANSI B16.9 & B16.28
39
Las
44626_Fittersboekje 05-01-2007 11:07 Pagina 41
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Las T-stukken vlgs ANSI B16.9
40
44626_Fittersboekje 05-01-2007 11:07 Pagina 42
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Las T-stukken verloop vlgs ANSI B16.9
41
Las
44626_Fittersboekje 05-01-2007 11:07 Pagina 43
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Las T-stukken verloop vlgs ANSI B16.9
42
44626_Fittersboekje 05-01-2007 11:07 Pagina 44
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Lasverloopstukken concentrisch en excentrisch vlgs ANSI B16.9
43
Las
44626_Fittersboekje 05-01-2007 11:07 Pagina 45
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Lasverloopstukken concentrisch en excentrisch vlgs ANSI B16.9
44
44626_Fittersboekje 05-01-2007 11:07 Pagina 46
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Inbouwmaat voor weldolets
45
Inb
44626_Fittersboekje 05-01-2007 11:07 Pagina 47
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Inbouwmaat voor weldolets
46
44626_Fittersboekje 05-01-2007 11:07 Pagina 48
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Inbouwmaat voor sockolets en threadolets
47
Co
44626_Fittersboekje 05-01-2007 11:07 Pagina 49
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Conversie tabel DN < - - - > INCH < - - - > D
48
44626_Fittersboekje 05-01-2007 11:07 Pagina 50
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
DINPijpafmetingen volgens DIN 2448
49
44626_Fittersboekje 05-01-2007 11:07 Pagina 51
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
DIN
50
44626_Fittersboekje 05-01-2007 11:07 Pagina 52
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
VoDIN
51
44626_Fittersboekje 05-01-2007 11:07 Pagina 53
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Voorlasflenzen volgens DIN 2631 ND 6
52
44626_Fittersboekje 05-01-2007 11:07 Pagina 54
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
VoVoorlasflenzen volgens DIN 2632 ND 10
53
44626_Fittersboekje 05-01-2007 11:07 Pagina 55
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Voorlasflenzen volgens DIN 2633 ND 16
54
44626_Fittersboekje 05-01-2007 11:07 Pagina 56
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
VoVoorlasflenzen volgens DIN 2634 ND 25
55
44626_Fittersboekje 05-01-2007 11:07 Pagina 57
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Voorlasflenzen volgens DIN 2635 ND 40
56
44626_Fittersboekje 05-01-2007 11:07 Pagina 58
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
VoVoorlasflenzen volgens DIN 2636 ND 64
57
44626_Fittersboekje 05-01-2007 11:07 Pagina 59
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Voorlasflenzen volgens DIN 2641 ND 6
58
44626_Fittersboekje 05-01-2007 11:07 Pagina 60
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
OverVoorlasflenzen volgens DIN 2642 ND 10
59
44626_Fittersboekje 05-01-2007 11:07 Pagina 61
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Overschuifflenzen volgens DIN 2655 ND 25
60
44626_Fittersboekje 05-01-2007 11:07 Pagina 62
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
VlaOverschuifflenzen volgens DIN 2656 ND 40
61
44626_Fittersboekje 05-01-2007 11:07 Pagina 63
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Vlakke lasflenzen volgens DIN 2573 ND 6
62
44626_Fittersboekje 05-01-2007 11:07 Pagina 64
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
VlaVlakke lasflenzen volgens DIN 2576 ND 10
63
44626_Fittersboekje 05-01-2007 11:07 Pagina 65
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Vlakke lasflenzen volgens DIN 2573 ND 6
64
44626_Fittersboekje 05-01-2007 11:07 Pagina 66
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
BliBlindflenzen volgens DIN 2527 ND 10
65
44626_Fittersboekje 05-01-2007 11:07 Pagina 67
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Blindflenzen volgens DIN 2527 ND 16
66
44626_Fittersboekje 05-01-2007 11:07 Pagina 68
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
BliBlindflenzen volgens DIN 2527 ND 25
67
44626_Fittersboekje 05-01-2007 11:07 Pagina 69
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Blindflenzen volgens DIN 2527 ND 40
68
44626_Fittersboekje 05-01-2007 11:07 Pagina 70
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Blindflenzen volgens DIN 2527 ND 64
69
Ho
44626_Fittersboekje 05-01-2007 11:07 Pagina 71
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Hoe berekent men de bouwlengte van een bocht
70
44626_Fittersboekje 05-01-2007 11:07 Pagina 72
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Bochten vlgs DIN 2605 en 2606
71
Bo
44626_Fittersboekje 05-01-2007 11:07 Pagina 73
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Bochten vlgs DIN 2605 en 2606
72
44626_Fittersboekje 05-01-2007 11:07 Pagina 74
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Las T - stukken vlgs DIN 2615
73
Las
44626_Fittersboekje 05-01-2007 11:07 Pagina 75
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Lasverloopstukken vlgs DIN 2616
74
44626_Fittersboekje 05-01-2007 11:07 Pagina 76
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Bolle bodems vlgs DIN 2617
75
Inla
44626_Fittersboekje 05-01-2007 11:07 Pagina 77
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Inlas zadelstukken vlgs DIN 2618
76
44626_Fittersboekje 05-01-2007 11:07 Pagina 78
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Inlas bocht vlgs DIN 2619
77
Vo
44626_Fittersboekje 05-01-2007 11:07 Pagina 79
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Voorboor diameter metrische schroefdraad
78
44626_Fittersboekje 05-01-2007 11:07 Pagina 80
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Voorboor diameter NPT draad
79
Co
44626_Fittersboekje 05-01-2007 11:07 Pagina 81
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Conversie tabel SI - Unis
80
44626_Fittersboekje 05-01-2007 11:07 Pagina 82
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
TanVoorbewerking laskanten
81
44626_Fittersboekje 05-01-2007 11:07 Pagina 83
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Tangenstabel enkele praktische toepassingen
82
44626_Fittersboekje 05-01-2007 11:07 Pagina 84
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Tan
83
44626_Fittersboekje 05-01-2007 11:07 Pagina 85
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Tangenstabel
84
44626_Fittersboekje 05-01-2007 11:07 Pagina 86
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
GL
Ra
12
Te
HyBS
AiS
St
CFT
Co
FF
FfHaVlPf
Wt
Ca
FfHaVlPf
Wt
Ca
1) S2) C3) F
Tangenstabel
85
44626_Fittersboekje 05-01-2007 11:07 Pagina 87
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Construction BS 5352Flanged ANSI B16.5, ANSI B16.10Test BS 5146
Connections (*)
Raised face (std.)FF Flat finish
Ff (mm/in)Ha (mm/in)Vl (mm/in)Pf (mm/in)
Wt. (kg/lb)
Catal. no.
117,5 4,63189 7,4490, 3,5412, 0,47
4 8,8
R353/15xx
127,0 5,00203 7,99110, 4,3317,5, 0,69
5,7 12,5
R354/15xx
165,1 6,50283 11,14140, 5,51
25(4), 0,98
10,6 23,3
R354/15xx
203,2 8,00314 12,36140, 5,5130(5) 1,18
15,4 33,9
R357/15xx
REDUCED BORE1/2” 3/4” 1” 1.1/2” 2”
FULL BORE1/2” 3/4” 1”
107,9 4,25186, 7,3290, 3,549, 0,35
3,1 6,8
R352/15xx
Ff (mm/in)Ha (mm/in)Vl (mm/in)Pf (mm/in)
Wt. (kg/lb)
Catal. no.
117,5 4,63192 7,56110, 4,3317,5 0,69
3,9 8,6
F313/15xx
127,0 5,00208 8,19120, 4,7222,5, 0,89
5,6 12,3
F314/15xx
107,9 4,25188, 7,4090, 3,5412, 0,47
3 6,6
F312/15xx
1) Standard and alternative valve materials 4) Pf = 29,5 with integral stellited seat2) Complete Pressure-Temperature ratings 5) Pf = 35 with integral stellited seat3) Flanges & face-to-face dimensions
86
44626_Fittersboekje 05-01-2007 11:07 Pagina 88
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Construction BS 5352Flanged ANSI B16.5, ANSI B16.10Test BS 5146
Connections (*)
Raised face (std.) LF Large femaleRJ Ring joint LG Large grooveSF Small female LM Large maleSG Small groove LT Large tongueSM Small maleST Small tongue
1) Standard and alternative valve materials 4) Pf = 29,5 with integral stellited seat2) Complete Pressure-Temperature ratings 5) Pf = 35 with integral stellited seat3) Flanges & face-to-face dimensions
87
GL
Ra
61
Te
HyBS
AiS
St
CFT
Co
RJ
FfHaVlPf
Wt
Ca
FfHaVlPf
Wt
Ca
1) S2) C3) F
44626_Fittersboekje 05-01-2007 11:07 Pagina 89
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Construction BS 5352Flanged ANSI B16.5, ANSI B16.10Test BS 5146
Connections (*)
Raised face (std.)RJ Ring joint
Ff (mm/in)Ha (mm/in)Vl (mm/in)Pf (mm/in)
Wt. (kg/lb)
Catal. no.
190,5 7,50159 6,2690, 3,5412, 0,47
5,1 11,2
R353/60xx
215,9 8,50182 7,17110, 4,3317,5, 0,69
7,8 17,2
R354/60xx
241,3 9,50283 11,14140, 5,5125(4) 0,98
14,2 31,2
R354/60xx
292,1 11,50306 12,05140, 5,5130(5) 1,18
19,4 42,7
R357/60xx
REDUCED BORE1/2” 3/4” 1” 1.1/2” 2”
FULL BORE
165,1 6,50152 5,9890, 3,549, 0,35
3,6 7,9
R352/60xx
Ff (mm/in)Ha (mm/in)Vl (mm/in)Pf (mm/in)
Wt. (kg/lb)
Catal. no.
1) Standard and alternative valve materials 4) Pf = 29,5 with integral stellited seat2) Complete Pressure-Temperature ratings 5) Pf = 35 with integral stellited seat3) Flanges & face-to-face dimensions
88
44626_Fittersboekje 05-01-2007 11:07 Pagina 90
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Construction API 602Flanged ANSI B16.5, ANSI B16.10Test API 598
Connections (*)
Raised face (std.)RJ Ring joint
Ff (mm/in)Ha (mm/in)Vl (mm/in)Pf (mm/in)
Wt. (kg/lb)
Catal. no.
REDUCED BORE
FULL BORE1/2” 3/4” 1” 1.1/2” 2”
Ff (mm/in)Ha (mm/in)Vl (mm/in)Pf (mm/in)
Wt. (kg/lb)
Catal. no.
228,6 9,00180 7,09110 4,3314 0,55
9,7 21,3
X653/150xx
254,0 10,00212 8,35120, 4,7218, 0,71
14,2 31,24
X654/150xx
304,8 12,00266 10,47140 5,51
31 1,22
24,6 54,2
X656/150xx
368,3 14,50318 12,52175 6,8936,5 1,44
40,8 89,8
X657/150xx
215,9 8,50163 6,42110 4,3310 0,39
9,1 20,0
X652/150xx
1) Standard and alternative valve materials2) Complete Pressure-Temperature ratings3) Flanges & face-to-face dimensions
89
Ga
44626_Fittersboekje 05-01-2007 11:07 Pagina 91
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
50528944
8
xx
Gate Valves Series 150 RF - 300 RF - 600 RF/RTJ API 602
90
44626_Fittersboekje 05-01-2007 11:07 Pagina 92
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
352 GATE VALVES - 150 Pound - Outside screw and yoke, bolted bonnet, rising system, flanged and welding ends
No. DESCRIPTION Standard High Temp. Serv. Low Temp. Serv.
1 Body A216 WCB A217 WC6 A 352 LCB2 Bonnet A216 WCB A217 WC6 A 352 LCB3 Yoke A216, Grade WCB4 Seat Rings* A182 F6 A182 F6-Stelli. A451 CPF85 Wedge* A182 F6 A182 F6-Stelli. A351 CF86 Stem* A182 F6 A 582 Gr. 3037 Back Seat Bushing A582, Gr. 416 A582 Gr. 3038 Gland Bushing A135 Alloy 2809 Gland Flange A216 WCB
10 Yoke nut B148 Gr. 9A11 Yoke-nut retainer A29 Gr. 104012 Handwheel Malleable iron13 Handwheel Nut A29 Gr. 104014 Gasket Abestos Filled iron16 Body Studs A193 Gr. B7 A320 Gr. L717 Body Nuts A194 Gr. 2H A320 Gr. L718 Eyebolt A307 Gr. B19 Nut A307 Gr. B20 Eyebolt Stud A307 Gr. B21 Nut A307 Gr. B26 Packing Reinforced Lub. Asbestos (with Corrosion Inhibitor)
28 Lubricant Fitting Steel (Commercial)29 Set Screw Steel (Commercial)
L-Face to face dimensions, 1/16” Raised Face. L1 = Face to face dimensions, Right Joint.Valves are available with SOLID WEDGE ans FLEX. WEDGE
* For specifications seeStandard Cast Carbon Steels seeHigh Temperature Service Low Alloy CastingsLow Temperature Service Low Alloy Castings
● Flanged End valves have dimensions conforming to ANSI B 16.5 and B. 16.10 and API 600.Butt Welding valves have dimensions conforming to ANSI B 16.25 and B. 16.34.
● Solid Wedges are accurately guided to the seating surfaces. Flexible Wedge insures pressure tightness and reduces operatingtorque needed to open the valve. Solid Wedges are furnished in valves 3” and smaller.
● If required the valves can be furnished with face-to-face dimensions, flange ends dimensions and drilling in accordance withBS, DIN, AFNOR or any other specs.
Size
H
H1
L
L1
M
O
b
Weight
21/2”65
153/4
4001811/16
47471/2
1918
20377/8
2007
17811/16
17.535
3”80
173/8
442203/4
5278
20381/2
21687/8
22571/2
1913/4
1936
4”100
2015/16
532255/16
6439
22991/2
24197/8
2509
22915/16
2460
5”125
2215/16
582285/16
71910
254101/2
26797/8
25010
25415/16
2483
6”150271/2
6983315/16
862101/2
26711
2791113/16
30011
2801
25.5100
8”200331/8
842415/8
1058111/2
29212
305163/4
425131/2
34311/8
28.5150
10”250
417/16
1052523/16
132613
330131/2
3431911/16
50016
40613/16
30.5220
12”300
469/16
1183593/8
150814
356141/2
3681911/16
50019
48311/4
32310
14”350
507/16
12816511/16
164415
381151/2
394225/8
57521
53313/8
35460
a16”400
5811/16
1490751/8
190816
406161/2
419255/8
650231/2
59717/16
36.5600
18”45064
16268211/16
210017
432171/2
445255/8
65025
63519/16
40740
20”500705/8
17939015/16
231018
457181/2
470283/8
720271/2
699111/16
43940
22”550791/4
20101025/16
260020
508201/2
521311/2
800291/2
749113/16
461220
24”600821/2
20951067/8
271520
508201/2
521311/2
80032
81317/8
481400
26”650
9015/16
23101185/16
300522
559--
3511/16
900341/4
8702
511850
28”700951/2
24251245/8
316524
610--
3511/16
900361/2
92721/16
52.52175
30”750
10013/16
25601315/16
333524610
--
631000383/4
98421/8
542500
34”850
11515/16
29451513/8
384528711
--
631600433/4
111125/16
593250
36”900
1225/16
31101591/2
405528711
--
631600
46116823/8
60.53963
DIMENSIONS (inches & mm)
MATERIAL-ASTM Spec.
92
44626_Fittersboekje 05-01-2007 11:08 Pagina 94
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
No. DESCRIPTION Standard High Temp. Serv. Low Temp. Serv.
1 Body A216 WCB A217 WC6 A 352 LCB2 Bonnet A216 WCB A217 WC6 A 352 LCB3 Yoke A216, Grade WCB4 Seat Rings* A182 F6 A182 F6-Stelli. A451 CPF85 Wedge* A182 F6 A182 F6-Stelli. A351 CF86 Stem* A182 F6 A 582, Gr. 3037 Back Seat Bushing A582, Gr. 416 A582 Gr. 3038 Gland Bushing A135 Alloy 2809 Gland Flange A216 WCB
10 Yoke nut B148 Gr. 9A11 Yoke-nut retainer A29 Gr. 104012 Handwheel Malleable iron13 Handwheel Nut A29 Gr. 104014 Gasket Abestos Filled iron15 Lantern A582 Gr. 416 A582 Gr. 30316 Body Studs A193 Gr. B7 A320 Gr. L717 Body Nuts A194 Gr. 2H A320 Gr. L718 Eyebolt A307 Gr. B19 Nut A307 Gr. B20 Eyebolt Stud A307 Gr. B21 Nut A307 Gr. B24 Tap Steel (Commercial)26 Packing Reinforced Lub. Asbestos (with Corrosion Inhibitor)
28 Lubricant Fitting Steel (Commercial)29 Set Screw Steel (Commercial)
L-Face to face dimensions, 1/16” Raised Face. L1 = Face to face dimensions, Right Joint.Valves are available with SOLID WEDGE ans FLEX. WEDGE
* For specifications see Standard Cast Carbon Steels seeHigh Temperature Service Low Alloy Castings seeLow Temperature Service Low Alloy Castings see
● Flanged End valves have dimensions conforming to ANSI B 16.5 and B. 16.10.Butt Weld valves have dimensions conforming to ANSI B 16.25 and B 16.10.
● Flanged End valves have dimensions conforming to API 600. Butt Weld valves have dimensions conforming to ANSI B 16.34● Lantern rings, when ordered, can be substituted for condensing chambers.
Size
H
H1
L
L1
M
O
b
Weight
21/2”65
175/16
439203/16
51391/2
241101/8
25787/8
22571/2
1911
25.545
3”80
193/4
501231/8
587111/8
283113/4
29897/8
25081/4
21011/8
28.560
4”100
2213/16
580273/8
69512305125/8
3211113/16
3001025411/4
3285
5”12525634303/8
77115381155/8
3971113/16
3001128013/8
35120
6”150
293/16
7423513/16
909157/8
403161/2
419163/4
425121/2
31817/16
36.5165
8”200
369/16
929451/16
1145161/2
419171/8
4351911/16
5001538115/8
41,5250
10”250433/8
1102541/4
137818457185/8
473225/8
575171/2
44517/8
48370
12”300483/4
1238615/8
1565193/4
502203/8
518225/8
575201/2
521251560
14”350
5515/16
1421705/8
179430762305/8
778255/8
6502358421/8
54800
16”400613/4
15697715/16
197933838335/8
854283/8
720251/2
64821/4
57.51040
18”450
667/16
1687847/8
215636914365/8
930283/8
7202871123/8
60.51300
20”500
7313/16
1875941/16
238939991393/4
1010311/2
800301/2
77521/2
63.51750
22”550811/4
20631041/16
264343
1092437/8
11143511/16
90033
83825/8
671950
24”600
853/16
21631097/16
278045
1143457/8
11653511/16
90036
91423/4
702200
30”750112
28451423/4
362555
139756
142263
160043
109235/8
92
DIMENSIONS (inches & mm)
MATERIAL-ASTM Spec.
93
GA
No.
123456789
101112131416171819202124262829
L-FVal
* FStaHigLow
● F● B● F● S● W
44626_Fittersboekje 05-01-2007 11:08 Pagina 95
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
No. DESCRIPTION Standard High Temp. Serv. Low Temp. Serv.
1 Body A216 WCB A217 WC6 A 352 LCB2 Bonnet A216 WCB A217 WC6 A 352 LCB3 Yoke A216, Grade WCB4 Seat Rings* A182 F6 A182 F6-Stelli. A451 CPF85 Wedge* A182 F6 A182 F6-Stelli. A351 CF86 Stem* A182 F6 A 582, Gr. 3037 Back Seat Bushing A582, Gr. 416 A582 Gr. 3038 Gland Bushing A135 Alloy 2809 Gland Flange A216 WCB
10 Yoke nut B148 Gr. 9A11 Yoke-nut retainer A29 Gr. 104012 Handwheel Malleable iron13 Handwheel Nut A29 Gr. 104014 Gasket Armco Iron Ring Joint type16 Body Studs A193 Gr. B7 A320 Gr. L717 Body Nuts A194 Gr. 2H A320 Gr. L718 Eyebolt A307 Gr. B19 Nut A307 Gr. B20 Eyebolt Stud A307 Gr. B21 Nut A307 Gr. B24 Tap Steel (Commercial)26 Packing Reinforced Lub. Asbestos (with Corrosion Inhibitor)
28 Lubricant Fitting Steel (Commercial)29 Set Screw Steel (Commercial)
L-Face to face dimensions, 1/4” Raised Face. L1 = Face to face dimensions, Right Joint.Valves are available with SOLID WEDGE ans FLEX. WEDGE
* For specifications seeStandard Cast Carbon Steels seeHigh Temperature Service Low Alloy Castings seeLow Temperature Service Low Alloy Castings see
● Flanged End valves have dimensions conforming to ANSI B 16.5 and B. 16.10 and API 600.● Butt Weld valves have dimensions conforming to ANSI B 16.25 and B. 16.34.● Flanged End valves can be furnished with ring joint flanges.● Seal Welded or PTFE insert Seat Rings are available on special order.● When ordering Butt Welding End Valves, specify schedule of pipe and give complete data concerning contour of weld ends.
Size
H
H1
L
L1
M
O
b
Weight
21/2”65
1911/16
5002213/16
58013330131/8
33397/8
25071/2
19111/8
28.570
3”80
227/8
581265/8
67714356141/8
3591113/16
30081/4
21011/4
3291
4”100261/2
673313/8
79617432171/8
435163/4
425103/4
27311/2
38.5154
5”12527686323/4
83220508201/8
511163/4
4251333013/4
44.5204
6”150333/4
857403/8
102722559221/8
5621911/16
5001435617/8
48295
8”200403/8
1025495/8
126126660261/8
664225/8
575161/2
41923/16
55.5526
10”250
461/16
11685611/16
144131787311/8
791255/8
6502050821/2
63.5807
12”300535/8
1362665/8
169333838331/8
841283/8
7202255925/8
67998
14”350581/4
1480721/2
184135889351/8
892311/2
800233/4
60423/4
701497
16”400641/2
16388011/16
205039991391/8
9943511/16
900276863
76.51996
18”450717/8
182690
228643
1092431/8
109563
1000291/4
74331/4
82.52676
20”500781/4
1989977/8
248647
1194471/4
120063
160032
81331/2
893493
22”550933/4
23821171/16
297451
1295513/8
130563
1600341/4
87033/4
95.54200
24”600957/8
24351201/4
305555
1397553/8
140763
160037
9404
1024990
DIMENSIONS (inches & mm)
MATERIAL-ASTM Spec.
94
44626_Fittersboekje 05-01-2007 11:08 Pagina 96
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Construction API 602, BS 5352Flanged ANSI B16.5, ANSI B16.10Test API 598, BS 5146
Connections (*)
Raised face (std.)FF Flat finish
1) Standard and alternative valve materials2) Complete Pressure-Temperature ratings 3) Flanges & face-to-face dimensions
107,9 4,25179 7,0590, 3,5410 0,39
3,2 7,0
R252/15xx
117,5 4,63186 7,3290, 3,5414, 0,55
4,1 9,0
R253/15xx
127,0 5,00208 8,19110, 4,3318 0,71
5,8 12,8
R254/15xx
165,1 6,50255 10,04140 5,51
31 1,22
10 22,0
R256/15xx
177,8 7,00273 10,75140, 5,5136,5 1,44
13,1 28,8
R257/15xx
107,9 4,25182 7,1790, 3,5414 0,55
3,1 6,8
F212/15xx
117,5 4,63190 7,48110 4,3318, 0,71
4 8,8
F213/15xx
127,0 5,00213 8,39120, 4,7223 0,91
5,7 12,5
F214/15xx
177,8 7,00314 12,36175, 6,8948 1,89
15,8 34,8
F217/15xx
95
GL
FfHaVlPf
Wt
Ca
FfHaVlPf
Wt
Ca
Ra
37
Te
HyBS
AiS
St
CFT
Co
RJSFSGSMST
1) S2) C3) F
44626_Fittersboekje 05-01-2007 11:08 Pagina 97
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Construction API 602, BS 5352Flanged ANSI B16.5, ANSI B16.10Test API 598, BS 5146
Connections (*)
Raised face (std.) LF Large femaleRJ Ring joint LG Large grooveSF Small female LM Large maleSG Small groove LT Large tongueSM Small maleST Small tongue
1) Standard and alternative valve materials2) Complete Pressure-Temperature ratings 3) Flanges & face-to-face dimensions
96
44626_Fittersboekje 05-01-2007 11:08 Pagina 98
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Construction API 602, BS 5352Flanged ANSI B16.5, ANSI B16.10Test API 598, BS 5146
Connections (*)
Raised face (std.)RJ Ring joint
1) Standard and alternative valve materials 2) Complete Pressure-Temperature ratings 3) Flanges & face-to-face dimensions
165,1 6,50145 5,7190, 3,5410 0,39
3,5 7,7
R252/60xx
190,5 7,50156 6,1490, 3,5414, 0,55
5,8 12,8
R253/60xx
215,9 8,50186 7,32110, 4,3318 0,71
7,4 16,3
R254/60xx
241,3 9,50255 10,04140 5,51
31 1,22
14,3 31,5
R256/60xx
292,1 11,50273 10,75140, 5,5136,5 1,44
18,8 41,4
R257/60xx
97
44626_Fittersboekje 05-01-2007 11:08 Pagina 99
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Construction BS 5352Flanged ANSI B16.5, ANSI B16.10Test BS 5146
Connections (*)
Raised face (std.)RJ Ring joint
Ff (mm/in)Ha (mm/in)Vl (mm/in)Pf (mm/in)
Wt. (kg/lb)
Catal. no.
REDUCED BORE
FULL BORE1/2” 3/4” 1” 1.1/2” 2”
Ff (mm/in)Ha (mm/in)Vl (mm/in)Pf (mm/in)
Wt. (kg/lb)
Catal. no.
228,6 9,00274 10,79175 6,8914,5 0,57
15,2 33,44
753/150xx
254,0 10,00286 11,26175, 6,8919, 0,75
17,3 38,1
754/150xx
304,8 12,00418 16,46225, 8,86
27 1,06
37,9 83,4
756/150xx
368,3 14,50468 18,46275 10,83
31 1,22
55,2 1,22
757/150xx
215,9 8,49218 8,58140 5,5111 0,43
9,4 20,7
752/150xx
1) Standard and alternative valve materials2) Complete Pressure-Temperature ratings3) Flanges & face-to-face dimensions
98
50755144
4
xx
44626_Fittersboekje 05-01-2007 11:08 Pagina 100
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Vuistregels
1. Oppervlakte pijpdoorsnede in cm2 is 5D2 als D in inches is.Voorbeeld: 4” pijp = opp. 5 x 42 = 80 cm2.
2. Inhoud 1 m pijp in liters = D2 : 2, als D in inches is.Voorbeeld: 6” pijp inhoud per meter is 62 : 2 = 18 liter.
3. Een meter pijp wordt 1 mm langer, wanneer 100o C verhit.Voorbeeld: 200 m pijp wordt 150o C verwarmd.Voorbeeld: Verlenging = 200 x 1,5 = 300 mm.Was een te repareren leiding ’s morgens (koud) opgemeten, dan zal deze’s middags (warm) niet meer passen.
4. Cirkel omtrek in cm = 8 x D, als D in inches is.Voorbeeld: D 31/2”. Omtrek = 8 x 31/2 = 28 cm.
5. KettingsterktenNeem schalmdikte in inches en herleid dit tot achtsten. Verhef de teller in’t kwadraat en deel daarna door 10. De uitkomst is het aantal tonnen,welke de ketting kan houden.Voorbeeld: Dikte = 5/8
De belasting van de ketting mag danzijn: 52 : 10 = 21/2 ton.
6. Touwsterkten. (Omtrek touw in cm2) x 8 = aantal kg dat hettouw kan houden.Voorbeeld: 1/2” touw. Omtrek touw = 8 x 1/2 = 4 cm2.
42 x 8 = 128 kg.
99
Ce
44626_Fittersboekje 05-01-2007 11:08 Pagina 101
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
e
n
Certifikaten
100
44626_Fittersboekje 05-01-2007 11:08 Pagina 102
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Certifikaten
101
Fle
44626_Fittersboekje 05-01-2007 11:08 Pagina 103
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Flenzen; tekensymbolen
102
44626_Fittersboekje 05-01-2007 11:08 Pagina 104
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Fittingen; tekensymbolen
103
Afs
44626_Fittersboekje 05-01-2007 11:08 Pagina 105
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Afsluiters; tekensymbolen
104
44626_Fittersboekje 05-01-2007 11:08 Pagina 106
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Verdeling omtrek pijp in 24 delen
105
Uit
44626_Fittersboekje 05-01-2007 11:08 Pagina 107
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Uitslag voor dummy’s
106
44626_Fittersboekje 05-01-2007 11:08 Pagina 108
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Uitslag voor dummy’s
107
Uit
44626_Fittersboekje 05-01-2007 11:08 Pagina 109
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Uitslag voor dummy’s
108
44626_Fittersboekje 05-01-2007 11:08 Pagina 110
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
Uitslag voor dummy’s
109
Kla
44626_Fittersboekje 05-01-2007 11:08 Pagina 111
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
110
Klassering van radiografieën
44626_Fittersboekje 05-01-2007 11:08 Pagina 112
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
111
Lijst met afkortingen Lijs
44626_Fittersboekje 05-01-2007 11:08 Pagina 113
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
112
Lijst met afkortingen
44626_Fittersboekje 05-01-2007 11:08 Pagina 114
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
113
Lijst met afkortingen Lijs
44626_Fittersboekje 05-01-2007 11:08 Pagina 115
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
114
Lijst met afkortingen
44626_Fittersboekje 05-01-2007 11:08 Pagina 116
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
115
Lijst van vertalingen Engels ---> Nederlands Lijs
44626_Fittersboekje 05-01-2007 11:08 Pagina 117
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
116
Lijst van vertalingen Engels ---> Nederlands
44626_Fittersboekje 05-01-2007 11:08 Pagina 118
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
117
Lijst van vertalingen Engels ---> Nederlands Lijs
44626_Fittersboekje 05-01-2007 11:08 Pagina 119
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
118
Lijst van vertalingen Engels ---> Nederlands
44626_Fittersboekje 05-01-2007 11:08 Pagina 120
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
119
Lijst van vertalingen Engels ---> Nederlands Lijs
44626_Fittersboekje 05-01-2007 11:08 Pagina 121
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
120
Lijst van vertalingen Engels ---> Nederlands
44626_Fittersboekje 05-01-2007 11:08 Pagina 122
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
121
Lijst van vertalingen Engels ---> Nederlands Lijs
44626_Fittersboekje 05-01-2007 11:08 Pagina 123
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
122
Lijst van vertalingen Engels ---> Nederlands
44626_Fittersboekje 05-01-2007 11:08 Pagina 124
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
123
Lijst van vertalingen Engels ---> Nederlands Lijs
44626_Fittersboekje 05-01-2007 11:08 Pagina 125
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
124
Lijst van vertalingen Engels ---> Nederlands
44626_Fittersboekje 05-01-2007 11:08 Pagina 126
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
125
Lijst van vertalingen Engels ---> Nederlands
44626_Fittersboekje 05-01-2007 11:08 Pagina 127
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
126
44626_Fittersboekje 05-01-2007 11:08 Pagina 128
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
127
44626_Fittersboekje 05-01-2007 11:08 Pagina 129
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 2.0.45 Copyright 2004 Heidelberger Druckmaschinen AG To view actual document colors and color spaces, please download free Prinect Color Editor (Viewer) Plug-In from: http://www.heidelberg.com Applied Color Management Settings: Output Intent (Press Profile): Print Gray.icm RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no CMYK Image: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no CMYK Graphic: Profile: ISOcoated.icc Rendering Intent: Perceptual Black Point Compensation: no Preserve Black: no Device Independent Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: no Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: All Colors to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes Enable Overprint in Device CMYK: yes Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no
128
Aanwijzingen voor het verplaatsen van één last met behulp
van twee hijswerktuigen
10 Beide hijswerktuigen hijsen
Als 1, maar met beide handen en armen.
11 Beide hijswerktuigen vieren
Als 2, maar met beide handen en armen.
12 Één hijswerktuig hijsen, één hijswerktuig stop
Één hand als 1, de andere hand als 3.
13 Één hijswerktuig stop, één hijswerktuig vieren
Één hand zie 3, de andere hand als 2.
65898_Omslag leemberg:Omslag 17-02-2010 10:29 Pagina 2
Prinect Printready ColorCarver
Page is color controlled with Prinect Printready ColorCarver 4.0.70.2 Copyright 2008 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: ECI_RGB.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: no Gray to knockout: no Pure black to overprint: no Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no