553 SS.pdf
2
LOAD KING TRAILERS Model 553 SS P.O. Box 427 701 E. Rose ST. Elk Point, S.D. 57025 USA Phone (605) 356-3301 Fax (605) 356-3268 Toll free (888) 264-5522 www.loadkingtrailers.com General Specifications Dimensions 55 ton net capacity full deck length 50 ton capacity in 16 feet load concentration @ 60 miles per hour 100,000/80,000 psi yield strength steel construction 17,600 lb estimated base unit weight 10 foot 9 inch gooseneck length 84 inch swing clearance 24 foot deck length, 102 inch deck width 24 inch loaded deck height 8 inch loaded ground clearance 51 inch 5 th wheel height Gooseneck Non-ground bearing gooseneck design Wet kit operation, less tractor portion Hydraulic self-lifting detachable gooseneck able to lift above or below transport position Hydraulic frame lift support Air-activated, self-locking pin on gooseneck, positive lock Gooseneck controls located at rear of gooseneck, gooseneck for easy access Ratchet system enables multiple deck height settings Deck 4 full depth 16” cambered deck beams Heavy duty I-beam crossmembers on on 24” centers 6 D-ring per side of deck Deck Cont. 12 full depth swing out outriggers per side for 2 inch boards Apitong 2 inch Apitong outer (center portion open) 30 degree radius rear drop ¾ height rear bolster Lowered last 3 crossmembers between main beams with special knuckle trough Subframe Air ride suspension Three 25,000 lb axles 54 ½ inch axle spacing Twelve 255/70R22.5 tires Twelve 8.25 x 22.5 hub piloted budd type disc wheels Oil seals 16 ½ inch 7 inch brakes Auto slack adjusters Standard 3 tail light package Wide Load sign pockets (no sign) Excavator cutout bottom, plated to 1 st axle, open to tailgate Other Mid-turn signal and clearance light DOT rubber mounted sealed LED lights with modular harness Mud flaps Red and white conspicuity striping Shot blast – primed and painted Black polyurethane Operating Pressure/GPM Wet kit System requires 3000 PSI at 10 GPM Maximum flow to lift load at full capacity ALL WEIGHTS ARE +/- 3% “Specifications subject to change without notice, drawing may show optional equipment.” REV 100117
-
Upload
vikash-singh -
Category
Documents
-
view
222 -
download
0
Transcript of 553 SS.pdf
7/27/2019 553 SS.pdf
http://slidepdf.com/reader/full/553-sspdf 1/1
LOAD KING TRAILERS
Model 553 SS
P.O. Box 427
701 E. Rose ST.Elk Point, S.D. 57025
USA
Phone (605) 356-3301
Fax (605) 356-3268
Toll free (888) 264-5522www.loadkingtrailers.com
General Specifications
Dimensions
55 ton net capacity full deck length
50 ton capacity in 16 feet load concentration
@ 60 miles per hour
100,000/80,000 psi yield strength steel
construction
17,600 lb estimated base unit weight
10 foot 9 inch gooseneck length
84 inch swing clearance
24 foot deck length, 102 inch deck width
24 inch loaded deck height
8 inch loaded ground clearance
51 inch 5
th
wheel heightGooseneck
Non-ground bearing gooseneck design
Wet kit operation, less tractor portion
Hydraulic self-lifting detachable gooseneck
able to lift above or below transport position
Hydraulic frame lift support
Air-activated, self-locking pin on gooseneck,
positive lock
Gooseneck controls located at rear of gooseneck,
gooseneck for easy access
Ratchet system enables multiple deck height
settings
Deck4 full depth 16” cambered deck beams
Heavy duty I-beam crossmembers on
on 24” centers
6 D-ring per side of deck
Deck Cont.
12 full depth swing out outriggers per side for 2
inch boards Apitong
2 inch Apitong outer (center portion open)
30 degree radius rear drop
¾ height rear bolster
Lowered last 3 crossmembers between main
beams with special knuckle trough
Subframe
Air ride suspension
Three 25,000 lb axles
54 ½ inch axle spacingTwelve 255/70R22.5 tires
Twelve 8.25 x 22.5 hub piloted budd type disc
wheels
Oil seals
16 ½ inch 7 inch brakes
Auto slack adjusters
Standard 3 tail light package
Wide Load sign pockets (no sign)
Excavator cutout bottom, plated to 1st
axle,
open to tailgate
Other
Mid-turn signal and clearance lightDOT rubber mounted sealed LED lights
with modular harness
Mud flaps
Red and white conspicuity striping
Shot blast – primed and painted Black polyurethane
Operating Pressure/GPMWet kit System requires 3000 PSI at 10 GPM
Maximum flow to lift load at full capacityALL WEIGHTS ARE +/- 3%
“Specifications subject to change without notice, drawing may show optional equipment.”REV 100117
![F-ZERO ファルコン伝説...1-1115-GBG c-30053-221 c-30053-221 J-360-22i T-253*553 T-253*553 T-36-GBC c-3252*55 Is—Y— riJ rOK?J r YES] 10-305](https://static.fdocuments.nl/doc/165x107/60e475c3dd5185356e22c104/f-zero-fffe-1-1115-gbg-c-30053-221-c-30053-221-j-360-22i-t-253553.jpg)
