304 1 001670 - vertbaudet · 2019. 11. 8. · Made in Vietnam Feito no Vietnã ... Gemaakt in...

10
Fabriqué au Vietnam Made in Vietnam Feito no Vietnã Hecho en Vietnam Hergestellt in Vietnam Prodotto in Vietnam Gemaakt in Vietnam Tehty Vietnamissa Tillverkad i Vietnam 001670 1304 01/10

Transcript of 304 1 001670 - vertbaudet · 2019. 11. 8. · Made in Vietnam Feito no Vietnã ... Gemaakt in...

  • Fabriqué au VietnamMade in VietnamFeito no VietnãHecho en VietnamHergestellt in VietnamProdotto in VietnamGemaakt in VietnamTehty VietnamissaTillverkad i Vietnam

    0016701304

    01/10

    TVanTypewritten text04/11/2019

  • 02/10

  • 03/10

  • • Maximum thickness of the mattress to be used is 120mm such that the internal height(surface of the mattress to the upper edge of the cot frame) is at least 500 mm in thelowest position of the cot base and highest position of the cot base.

    • Choose a mattress 120 x 60cm

    Warning:

    • Do not leave anything in the cot or place the cot close to another product,which could provide a foothold or present a danger of suffocation orstrangulation, e.g. strings,blind/curtain cords.

    • All hardware must be correctly tightened to avoid a danger of suffocationor stangulation by strings,chains getting caught

    • Assembly fittings should always be tightened properly and that fittingsshould be checked regularly and retightened as necessary.

    Warning:

    • Do not use more than one mattress in the cot.

    • To prevent injury from falls that when the child is able to climb out of the cot,the cot shall no longer be used for that child.

    Warning :

    • Do not use the cot if any part is broken,torn or missing and use onlyspare parts approved by the manufacturer.

    Warning :

    • Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the cot.

    The instructions for use shall include the following statements.Thickness of the mattress shall be such that the internal height(surface of the mattress to the upper edge of the cot frame) is at least 500 mmin the lowest position of the cot base and at least 200 mm in the highest positionof the cot base.This information is not applicable to and shall not appear for foldingcots in which the mattress is an integral part of the product through a mattress base. Max thickness of matress 120mm .

    Important !Retain for future reference.

    Please read carefully.

    04/10

  • TVanTypewritten textxxx xxx xxx

  • 050607080910190814-AI-Barque baby bed Model (1)190814-AI-Barque baby bed Model (1)190814-AI-Barque baby bed Model (1)190814-AI-Barque baby bed Model (1)190814-AI-Barque baby bed Model (1)190814-AI-Barque baby bed Model (1)190814-AI-Barque baby bed Model (1)190814-AI-Barque baby bed Model (1)