#madeinfrance -...

#madeinfrance

User Manual // DMX transmitter - ref. TA51W2 V01.a

INNLED - 360, Avenue des Compagnons, 34170 Castelnau-le-Lez - FRANCE

Tel : +33 (0) 9 500 508 78 // Fax : +33 (0) 9 550 508 78 // mail : [email protected] / 13

Thankyou for purchasing an INNLED product.

« Commited to supporting the french industry, this product was developed and assembled within our Montpellier workshop. We attach particular importance to our clients’ feedback so feel free to contact us in case of any comment or suggestion.So we can continue ’’ lighting up your ideas ’’ in the most efficient way... »

The Innled team

Terms of use and Warranty terms, read page 13

3 / 13


Tel : +33 (0) 9 500 508 78 // Fax : +33 (0) 9 550 508 78 // mail : [email protected]

Contents

INNLED products are designed to light up your greatest moments, however organised or totally improvised they are ! Whether you are indoors or outdoors, whether you have access to power or not, we will continue lighting up your ideas at all times.

DIMENSIONS AND INSTALLATION

USING YOUR TRANSMITTER

• Home screen • Parameters

• Wifi menu

ART-NET CHARACTERISTICS

FREQUENCIES TABLE

OPTIONS AND ACCESSORIES

• Wireless driving

LAPPS : INNLED APP

• BASIC Mode • EXPERT Mode

• Wifi Menu

TECHNICAL SPECIFICATIONS

• TA51W2 transmitter

• LAPPS

WARRANTY TERMS

p 4

p 52.1.

p 73.p 84.p 85.

p 9

p 11

p 13

6.

7.

8.



109 mm 84 m

m

The TA51W2 transmitter is equipped with three DMX inputs :- one OPEN DMX on the USB input- one on the XLR 3 or 5 points DMX IN connector- an ARTNET input on 2.0.0.1., universe 0 on the access point.

The two inputs cannot coexist at the simultaneously.

FRONT

BACK

DIMENSIONS AND INSTALLATION1.

Navigation wheel with validation button

Wifi antenna

LCD colour screen

Transmission antenna

45 mm



ParametersProvides access to the transmitter’s settings.

1.

2.

3.

4.

5.

AssignmentAllows you to assign your receivers on the DMX universe of your choice.

WifiProvides access to the settings of the access point (except V Lite)

ToolsTools page

HF ScanStarts an HF Scan. This button is only available in the Auto Mode.

UniverseSettings of the DMX HF universe sent by the transmitter. Initially the receivers follow Universe 1 ; if you change this setting, make sure you assign your receivers again with the same universe.REMINDER : the receiver’s addressing is done as the receiver is switched on.

FrequencyFor the settings of the frequency channel, we advise you to stay on Auto mode (the least crowded channel).

1 / PARAMETERS

Home screen

2. USING YOUR TRANSMITTER

Each HF receiver is « assigned » to a DMX universe ; UNIVERSE 1 is the default setting.When switched on, the receiver ( KUB, Hariz, ... ) continuously scans the frequencies, until the assigned universe is detected.When delivered, the products are set to function on UNIVERSE 1 ( 32 in all ) and the transmitter set to transmit on frequency 1 ( 22 in all ).

If you wish to change these settings :



ProtocolSince 2015, we’ve been using the version B of the protocol. If you have receivers < 2015, please refer to version A.

1 / PARAMETERS(continuation)

UniverseAllows you to chose the number of the DMX universe which is assigned to the receivers, from 1 to 24. AddressAllows you to send the DMX address to the receivers (Hariz, KUB, Pak, etc). This setting can be adjusted from 001 to 511.

DMX1 ValueAllows you to know the values sent to the DMX input.

HF analysersAllows you to see how busy the 2,4Ghz frequencies are.

Maj OnAirAllows you to update the DMX receivers to « wireless ».

2 / ASSIGNMENT

3 / TOOLS

Once the address number is provided, switch the concerned receiver(s) on. Repeat the operation for each DMX address required for your show.

WARNING ! The assignment is taken into account as you switch on the receiver. If the receivers are already switched on, the assignment is not taken into account.

COMMENTS- During the assignment, the DMX is not active.- The modification of the assignment setting does not modify the DMX transmission protocol (Settings menu).



Levels of the HF channels From 1 to 21 (left to right).

Colour codeGreen : no signal detected Orange : signal detected but little traffic or power.Red : Channel to avoid as strong signal or with dense traffic.

ElectArtChoice of the wifi network number.

Wifi passwordPredefined password : 01234567. This setting can be modified.

Wifi channel Choice of the wifi channel.

4 / HF analyser

5 / Wifi Menu

3. ART-NET CHARACTERISTICS ( except version Lite )

Node address : 2.0.0.1Broadcast on address : 2.255.255.255Universe : 0Automatic IP address via DHCP Maximum Node frequency : 33 HZ (works ideally at 25Hz)



4. FREQUENCIES TABLES

According to the : « Décision n° 03-908 de l’Autorité de régulation des télécommunications » (France)

Authorized inside / outside :

1 2404 Mhz 2 2408 Mhz 3 2412 Mhz 4 2416 Mhz 5 2420 Mhz 6 2424 Mhz 7 2428 Mhz 8 2432 Mhz9 2436 Mhz 10 2440 Mhz 11 2444 Mhz 12 2448 Mhz 13 2452 Mhz

Authorized only inside :

14 2456 Mhz 15 2460 Mhz 16 2464 Mhz 17 2468 Mhz 18 2472 Mhz 19 2476 Mhz 20 2480 Mhz 21 2483,5 Mhz

5. OPTIONS AND ACCESSORIES

1. 9 dBi DIRECTIONAL ANTENNA• For 2,4 GHz networks• Angle : 90° horizontal – 60° vertical • Distance : 250m• 9dBi directional operation provides extended point to point connection or indoor and outdoor area coverage• Features : 100cm(39.4 in) CFD-200 low loss cable for flexible deployment • RP-SMA Male connector• Provides easy installation mounting kits

Wireless driving



6. LAPPS : INNLED’S APP

PIXELRandom flashes

Choice of colour : YES Intensity setting : YES

Choice of colour : NO Intensity setting : YES


Connected to the TA51W2, LAPPS allows you to drive one or several lamps form a distance. Navigate through a panel of colours, set your intensity and chose your effects.

LAPPS WILL ONLY WORK WITH THE TA51W2 TRANSMITTER.

1. BASIC Mode

Basic Mode : available effects

This page will give you access to an overall intensity setting, a range of 9 colours and 3 pre-programmed effects : Pixel, Chase and Rainbow.

CHASECascade of colour with frank transitions

RAINBOWWaves of colour on 5 minute cycles



CHASECascade of colours with frank transitions



Choice of colour : YES Intensity setting : NO

Choice of colour : YES Intensity setting : YES

2. EXPERT Mode

Settings Page

The Settings page gives access to an interactive console allowing you to vary the colours of the selected lamps, in order to create your own composition. This page also includes a general intensity setting and 6 pre-programmed effects : 2 Pulse, 2 Rainbow, 1 Chase and 1 Pixel.

PULSESynchronized breathing with variable intensity ( increasing and decreasing )

Expert Mode : available effects

In the EXPERT mode, the «Pulse» and «Rainbow» effects are available in synchronous (lamps work together) or asynchronous.

Within this mode, two pages are available.

PIXELRandom flashes

RAINBOWWaves of colours on 5 minute cycles



7. TECHNICAL SPECIFICITIES

POWER SUPPLY• Supplied• USB port• DC 5V USB

HF POWER• (2,4Ghz) : 20db (100mW)

FREQUENCY• 21

UNIVERSES AND CHANNELS• 31• 15872 channels

ANTENNA• External articulated 1db• SMA connector

ENTRIES• USB “OPEN DMX” entry• XLR DMX 5 points entry• Art Net in on access point

OUTPUT• XLR 5 points reboosted output

SECURITY• Configurable SSID and password• WPA2 Security on the Wifi

PROTOCOL• W2.4EC-DMX-A and B

IP• IP20

NORMS• CE

DIMENSIONS• L 100 x l 85 x H 48mm

WEIGHT• +/- 300g

TEMPERATURE RANGE• 0° to +40°C

WARRANTY• 2 years

To reach the Selection Page, click on the “ EXPERT > ” tab on the bottom right hand side corner. This page allows you to chose the lamp(s) to control.All the lamps are automatically selected when you open the page.Pink = selectedGrey = not selected

Selection Page

1. TA51W2 transmitter



AVAILABILITY• Androïd on Google Play• Apple store

ACCESS

• Wifi, 2,4GHz band

ADRESSING• Fixed addressing of 32 lamps on 6 DMX channels : dimmer, strobe, red, green, blue, warm white

RANGE• HARIZ• PAK• KUB

MEMORY OCCUPATION• 683 Ko

BASIC MODE• General intensity • Warm white + 8 colours• 3 effects (rainbow, chase, pixel)

EXPERT MODE• Settings Page with : - 6 effects (2 Pulses, 2 Rainbows, Pixel, Chase) - 5 cursors (intensity, R, G, B, Warm White) - 10 time-limited buttons : up / down in 3s• Selection Page from 1 to 32 lamps

2. LAPPS



#madeinfrance

Please refer to INNLED’s general warranty terms

Furthermore, INNLED products are designed for professional use only, they are not to be used in a domestic environment.

Committed to an approach based on quality, INNLED reserves the right to adapt or modify the technical characteristics of its products at any given moment and without any given notice, the adaptations or modifications then apply to all the orders placed after the date upon which

those adaptations or modifications were made.

Warranty Terms

#madeinfrance -...

Documents

Transcript of #madeinfrance -...