LA6 LA6-POE - PATLITEIP65※ Φ60 24V DC Buzzer 11 Sound 100 - 240V AC 85dB (at 1m) PC PLC IP54※...
Transcript of LA6 LA6-POE - PATLITEIP65※ Φ60 24V DC Buzzer 11 Sound 100 - 240V AC 85dB (at 1m) PC PLC IP54※...
ww
w.p
atlit
e.co
m
Am Soeldnermoos 8, D-85399 Hallbergmoos, GermanyTEL. +49-811-9981-9770-0 FAX. +49-811-9981-9770-9 E-mail: [email protected]
A2603, Daesung, D-POLIS, 606, Seobusaet-gil, Geumcheon-gu, Seoul, 08504, KoreaTEL. +82-2-523-6636 FAX. +82-2-861-9919 E-mail: [email protected]
No.2 Leng Kee Road, #05-01 Thye Hong Centre, Singapore 159086TEL. +65-6226-1111 FAX. +65-6324-1411 E-mail: [email protected]
Room 1102-1103, No.55, Lane 777, Guangzhong Road (West), ZhabeiDistrict, Shanghai, China 200072TEL. +86-21-6630-8969 FAX. +86-21-6630-8938 E-mail: [email protected]
4-1-3, Kyutaromachi, Chuo-ku, Osaka 541-0056 JapanTEL. +81-6-7711-8953 FAX. +81-6-7711-8961 E-mail: [email protected]
20130 S. Western Ave. Torrance, CA 90501, U.S.A.TEL. +1-310-328-3222 FAX. +1-310-328-2676 E-mail: [email protected]
7F. No. 91, Huayin St, Datong District Taipei, Taiwan R.O.CTEL. +886-2-2555-1611 FAX. +886-2-2555-1621 E-mail: [email protected]
Olympia Thai Tower, 15th Floor 444 Ratchadapisek Road Samsennok, Huay Kwang Bangkok 10310, ThailandTEL. +66-2-541-5431 FAX. +66-2-541-5429 E-mail: [email protected]
Sleek Design. Fully Customizable. Endless Possiblities.
(Power over Ethernet)for single cable installation
(for Power over Ethernet)
Cycle Time
Level MeterMonitoring
StatusCondition
RemoteMonitoring
Ethernet PoE
LA6-POE
LA6-POE
■ SpecificationsModel
Rated Voltage
Operating Voltage Range
LA6 LA6-POE24V DC/100-240V AC (50Hz/60Hz) 24V DC/48V DC (PoE)
24V DC ±10%/90-250V AC (50Hz/60Hz) 24V DC±10%/36-57V DC (PoE)
Rated Power
Consumption
Standard
Maximum
LA6-5D��N-RYGBC 5W
LA6-3D��N-RYG 3.5W
LA6-5AWJWB-RYGBC 6.5W
LA6-5D��N-YYYYY 7W
LA6-3D��N-YYY 4.5W
LA6-5AWJWB-YYYYY 7.5W
LA6-5D��B-RYGBC 6.5W
LA6-3D��B-RYG 4.5W
LA6-5D��B-YYYYY 8W
LA6-3D��B-YYY 5.5W
7.2W (24V DC)/8.6W (PoE)
12.9W (26.4V DC)/12.5W (PoE)
Signal Line Current Max.70mA (at 24V DC)/Max.20mA (at AC100-240V) Max. 420mA (at 26.4V DC)/10mA (for PoE)
Operation Method
-25℃ to +60℃
Less than 90% RH, no condensation
Upright/Inverted
IP65 (with Buzzer: IP54) (IEC 60529)
Tested while mounted in the upright position
Indoors Only
More than 1MΩ at 500V DC between the power input lead and chassis.
(500V AC at 24V DC/1500V AC at 100 - 240V AC) for 1 minute between terminals and chassis without breaking insulation.
Signal Mode: 9 colors/Smart Mode: 21 colors
11 Sounds
Maximum 85dB
Buzzer Sound No.1, in an upright position with a distance from Buzzer opening at 1meter
-10℃ to +50℃
Less than 90% RH, no freezing or condensation
Upright
IP54 (Stationary type: IP20) (IEC 60529)
Environmental Conditions
Environmental Conditions
Signal Control Signal/Command Control
Standard
Compliances
█ 24V DC EMC Directive (EN 61000-6-4, EN 61000-6-2), RoHS Directive (EN 50581),UL508, CSA-C22.2 No. 14, FCC Part 15, Subpart B Class A, KC (KN 61000-6-4, KN 61000-6-2)
█ 100-240V ACEMC Directive (EN 61000-6-4, EN 61000-6-3), RoHS Directive (EN 50581),Low-voltage Directive (IEC/EN 60947-5-1, EN 62471)
EMC Directive (EN 61000-6-4, EN 61000-6-2, EN55032 Class A, EN 55024, RoHS Directive (EN 50581), FCC Part 15, Subpart B Class A, KC (KN 61000-6-4, KN 61000-6-2), UL 60950-1,CAN/CSA-C22.2 No. UL 60950-1-07, Recognized Component (File No. E480103),* The 24V DC Direct Mount type conforms to the following conformities:UL508, CAN/CSA C22.2 No. 14 Recognized Component (File No. E215660)
Operating Temperature Range
Operating Humidity RangeMounting Direction
Protection Rating
Mounting Location
Insulation Resistance
Withstand Voltage
Display Color Variations
Buzzer Sounds
Sound Level
LA6 LA6-POELA6-5DTNWB-POE
LED Tiers
Model
Mounting
Direct MountStationary with “Clear” switch
TNSN
Extension Function
Rated Voltage
Rated Voltage is 24V DC
PoE Supported
Body Color
O�-whiteW
with Flashing/BuzzerB
Flashing/Buzzer type
LA6-5DLJWB-RYGBC3 Tiers5 Tiers
RYGRYGBC
Color
O�-whiteSilver
WU
Body Color
3 Tiers5 Tiers
35
LED Tiers
with Flashing/Buzzerno Flashing/Buzzer
BN
Flashing/Buzzer type
100~240V AC24V DC
AD
Rated Voltage
Direct Mount/TerminalSteel Pole with L-bracket/CableDirect Mount/Cable
TNLJWJ
Mounting/Wiring
※ There is no Silver (U) body color selection for the LJ type.※ 100V - 240V AC type is only available for LA6-5AWJWB-RYGBC.
■ Lineup
Direct Mount/Terminal/Buzzer
Direct Mount/Terminal/No Buzzer
Direct Mount/Cable/Buzzer
Direct Mount/Cable/No Buzzer
Direct Mount/Terminal/Buzzer
Direct Mount/Terminal/No Buzzer
Direct Mount/Cable/Buzzer
Direct Mount/Cable/No Buzzer
L-Bracket with Pole/Cable/Buzzer
L-Bracket with Pole/Cable/No Buzzer
LA6-3DTNWB-RYG
LA6-3DTNWN-RYG
LA6-3DWJWB-RYG
LA6-3DWJWN-RYG
LA6-3DTNUB-RYG
LA6-3DTNUN-RYG
LA6-3DWJUB-RYG
LA6-3DWJUN-RYG
LA6-3DLJWB-RYG
LA6-3DLJWN-RYG
Off-white
Silver
O�-white
3 Tiers 24V DC
Tiers Voltage Body ColorModel Type
Direct Mount/Cable/Buzzer
Direct Mount/Cable/No Buzzer
Direct Mount/Terminal/Buzzer
Direct Mount/Terminal/No Buzzer
Direct Mount/Terminal/Buzzer
Direct Mount/Terminal/No Buzzer
Direct Mount/Cable/Buzzer
Direct Mount/Cable/No Buzzer
L-Bracket with Pole/Cable/Buzzer
L-Bracket with Pole/Cable/No Buzzer
Direct Mount/Cable/Buzzer
Direct Mount/Terminal/Ethernet/Buzzer
Stationary/Terminal/Ethernet/Buzzer
LA6-5DTNWB-RYGBC
LA6-5DTNWN-RYGBC
LA6-5DWJWB-RYGBC
LA6-5DWJWN-RYGBC
LA6-5DTNUB-RYGBC
LA6-5DTNUN-RYGBC
LA6-5DWJUB-RYGBC
LA6-5DWJUN-RYGBC
LA6-5DLJWB-RYGBC
LA6-5DLJWN-RYGBC
LA6-5AWJWB-RYGBC
LA6-5DTNWB-POE
LA6-5DSNWB-POE
Silver
O�-white
O�-white
24V DC
100 - 240V AC
24V DC orPoE (48V DC)
5 Tiers
Tiers Voltage Body ColorModel Type
O-AG06A 1710 AEN
Signal Tower
LA6 Series
1 2
A SIGNAL TOWER DESIGNED TO SHOW MORE SO YOU CAN DO MORE
COMMON ON-SITE OCCURRENCES LA6 SOLUTION
CycleTime
Level MeterMonitoring
StatusCondition
RemoteMonitoring
ColorChange
OUR PROCESSES HAVE CHANGED.We now need to reconfigure the color modules on our Signal Towers.
OUR MACHINE LINE IS EXPERIENCING TOO MANY STOPPAGES.We need to make our workers better aware of machine status, so they can take quicker corrective measures.
WE ARE EXPERIENCING DOWN TIME DUE TO MATERIAL MANAGEMENT.
PRODUCTION STOPPAGES ARE OCCURRING AS A RESULT OF UNEVEN WORKFLOW.
WE NEED TO IMPLEMENT REMOTE MONITORING TO MINIMIZE OUR LABOR COSTS.We need to monitor the operating status of equipment with long processing time, as well as abnormal stoppages or delays as they occur.
Variations in work output is creating bottlenecks that can be smoothed out with a Takt system.
We need earlier notifications prior to materials completely depleting to avoid delays.
The LA6 doesn’t require any hardware or wiring changes to reconfigure colors.The LA6 can be easily programmed anywhere without tools.
The LA6 is able to create better, more dynamic visual signals to elicit a quicker response by workers.
The LA6 can be programmed to act as a visual level meter to help manage materials and material levels.
The LA6 has an internal timer function, allowing you to create visual timers for a streamlined Takt system.
The LA6 is able to send information to other LA6 devices in remote locations via its mirroring function.
Operational Attention Emergency
Breakdown
Minor Error Breakdown Emergency
3 4
Tank Full Midpoint Tank Low
TankLow
■ Display up to21 different colorsfor different equipment statuses
■ Display the level of status severity
■ Display Remaining tank levels in stages
Socket Transmission
PC
Modbus/TCP
PLC
By programming the LA6 to a single, all-tier color arrangement, the equipment status can now be seen at a greater distance, improving awareness and response time.
The LA6 is able to display more detailed information, such as the status severity level, or speci�c abnormality conditions, that workers normally would have to look for on an equipment panel or HMI.
By displaying current material levels, workers can more accurately respond to changes, reducing downtime. As material levels reach certain thresholds, the LA6 can provide earlier visual and audible noti�cations.
The LA6 conveniently integrates into your facilities’ existing LAN infrastructure.By connecting to a PoE (Power over Internet) compliant HUB, the LA6 can be controlled and powered through a single cable.
IMPROVE VISIBILITY WITHOUT RECONFIGURING HARDWARE
WIRING MADE EASY WITH LAN CONNECTIVITY
REDUCE DOWNTIME WITH LEVEL MONITORING
INCREASE EFFICIENCY WITH MORE DYNAMIC VISUAL WARNINGS
Level MeterMonitoring
StatusCondition
RemoteMonitoring
ColorChange
EthernetPoE
ADVANCED OPTIONS TO SOLVE ANY APPLICATION
5 6
PROBLEM
IMPLEMENTATION MERIT
PROBLEM
IMPLEMENTATION MERIT
Idle time or delays on the production assembly line is sometimes caused by variations in the rate of worker output.
With the LA6 visual Takt system, workers will be more aware of the progress of the entire line, minimizing delays, and resulting in a smoother work flow.
Due to high volumes of products to inspect, some defective products may be overlooked and pass inspection.
With the LA6 internal timer function, inspectors are allotted proper time for each inspection, resulting in an improved yield rate by accurately detecting inferior goods.
SwitchON
Takt Time 100 sec.50 sec.100 sec.
Process Flow
Cart LockRelease Button
Cart Lock
Time up0 sec.
10 sec. lateOperationComplete
Over30 sec. late
Flashing
Overdue
SwitchON
Cart Lock
• Send it to the next process by unlocking it.
• As new carts arrive, the LA6 restarts the cycle time.
Balance the assembly line with a Takt system Prevent defective product outflow during inspection
Sensors detect inspectors as they enter the process line, triggering the LA6 to begin the count and the inspectors carry out inspection until the LA6 turns all blue.
Counting by the minute FinishStartInspection Time = 5 minutes
Inspection
Cycle TimeCycle Time
REDUCE BOTTLENECKS WITH A VISUAL TAKT SYSTEM
7 8
Administration BuildingOutdoor Building 1 (Unmanned) Administration BuildingFactory
Tank in Building 1needs attention!
ControlBox (PLC)
LAN
ContactInput
Command
Interface Converter
PROBLEM PROBLEM
IMPLEMENTATION MERIT IMPLEMENTATION MERIT
OutdoorPump
LiquidSensors
Quicker response with remote monitoring See equipment status from multiple locations
Tanks located in remote buildings tend to be overlooked until the tanks are completely depleted.
The LA6 can be used as an economical level meter system, capable of alerting remote personnel of equipment changes in real-time.
Managers in remote offices need to monitor machinery statuses on the factory floor in real-time.
With the LA6-POE’s built-in mirroring function, equipment status, Takt time, etc., can be communicated to other LA6-POE devices in remote locations via a LAN connection. This data can also be sent to a third-party software through the LAN connection for data analysis or Andon monitoring.
Analog output for every liquid level sensor threshold.
Visualrepresentation of gradually changing tank fluid levels.
BuzzerBuzzerBuzzer
Up to 8remote
Locations
1. The signal is sent from the LA6-POE, located on the equipment to indicate the status.
2. LA6-POE devices located in remote offices mirror, or reflect the status of the LA6-POE in the factory.
RemoteMonitoring
EthernetPoE
RemoteMonitoring
LAN
Internet
OBTAIN EQUIPMENT INFORMATION FROM REMOTE LOCATIONS
Φ60IP65※
24V DC
Buzzer11 Sound
100 - 240V AC
85dB(at 1m)
PC PLC
Φ60IP54※
Buzzer11 Sounds
85dB(at 1m)
EthernetPoE
24V DC 48V DC(PoE)
HTTPNEW
For LA6/LA6-POE For LA6 For LA6-POE
LA6
LA6-POE
LA6
LA6 / LA6-POE
EthernetPoE
Modbus/TCP
EASYWEB Setup
INPUTS
9 10
Diffusion &Water Resistance
Sound
BUZZER SOUND SETUPThe built-in switch has four selectable settings for "Loud" (about 85dB) -> "Middle" (about 80dB) -> "Low" (about 75dB) -> "O�".
COLOR SETUPThe built-in switch can also allow a manual selection of 9 colors to be set for each tier.
Multi-function Switch for various setupsThe newly developed lens design e�ciently di�uses LED light so that it is unmistakably visible, even from great distances.
A new lens design optimizes visibility.
A newly developed compact loudspeaker not only can transmit a clear sound of 85 dB (at 1m), but also has added water resistance. A di�erent alarm sound can be set up with each display pattern when in the Smart mode. (Only three of the 11 alarm patterns are selectable in the Signal Tower mode)
The alarm has a total of 11 soundsto match various applications.
Use the free editing software to freely change the LA6 colors and patterns.Upload colors and patterns to the signal tower via a USB cable.** The USB cable is sold separately (USB microB type with Charging/ Data Transfer capability).
PoE (Power over Ethernet) is a technology which lets network cables carry electrical power. PoE can bring many advantages, such as reducing costs of installing electrical cabling, by connecting it with a HUB supporting PoE, or have the �exibility of not having to be tethered to an electical outlet.
Conveniently connects to an existing network with PoE support.
By using a PNS Command, the LED unit colors for tiers 1-5 can be controlled.
3rd Party Software: LA6-POE can send machine status data over Ethernet to centralized software for remote Andon monitoring or data analysis.
Has eight inputs available for connecting a PLC, or discrete I/O. Data through these inputs can be transferred to a server over the Ethernet. DC power can also be wired if a Poe supporting LAN is not available.
Detachable Terminal Block
Access and control all LA6-POE functions remotely in various network environments with this flexible protocol.
24V DC / 3 and 5 Tier Types 100 - 240V AC 5 Tier Types
LightingFlashing/Buzzer Steel Pole Type (L J)
O�-white Silver
※ Alarm Type: IP54
Flashing/BuzzerO�-white
Direct Mount / Stationary type
Optional Parts
※ Direct Mount Type
Direct Mount type
Stationary Typewith "Clear" switch
PNS Command
HTTP Command
Modbus / TCP
⃞ Stationary Bracket:(Magnetic Mount)Model: SZW-060WDirect Mount type
⃞ Wall Mount Bracket:Model: NH-WST2Stationary type
⃞ Stationary Bracket:SZK-003WDirect Mount type
⃞ Mounting Polewith L-Bracket:SZ-70L
⃞ Circular Bracket:SZ-010
⃞ Circular Bracket:SZ-016A
Voltage: 24V DCDirect Mount/Terminal (TN)Steel Pole with L-bracket/Cable (LJ)
Voltage: 100-240V ACDirect Mount/Cable (LJ)
The LA6 alarm features a total of 11 sounds to match various applications.
LA6 SIGNAL TOWER
11 12
9Color
1 2 3 4START
Simple program software!Download and easily set upPATLITE's exclusive editing software.
■ Easy Setup
1. Time-trigger Type
● Various Setups ○ Group setup (Detailed Settings)・ Flash Reduction Setup・ Time Span (0.1 sec./1.0 sec.)・ Repetitive Lighting Setup
○ Sign pattern generation (9 colors)Generate colors as gradations or chaser lights.- Color select: Cycle Speed (Low/High)
○ SimulationCheck the light pattern by previewing it before transmitting data into the unit.
○ System Transmit and Receive* Data can be written into the unit and also read from it, so that patterns can be easily copied into other units.
10 min. progress 30 min. progress 50 min. progress
Setup timing in pattern changes with the editing software.
Automatic
Group 1 Group 2 Group 3
Inputs 1-5, with ON/OFF signal combinations, is made to operate.
① Color Setup (Maximum of 21)
* The screen above is only an image (conditions may vary with setup parameters).
* A single display type can register a maximum of 31 groups.
21 di�erent colors can be selected as part of a program.
③ Operations (Maximum of 63)Select the desired color, �ashing period and the active duration of the light and alarm* (maximum of 3,600 seconds, and 11 sounds).
② Signal Tower Setup FeaturesWith a maximum of 15 groups*, 63 series of operations can be registered to perform an operation setup as one group.
AutomaticContactInput
ContactInput
ContactInput
ContactInput
Free
Pattern transition timing can be controlled by individual discrete inputs.
2. Pulse-trigger Type
Determine thresholds for pressure / temperature, etc.
ContactInput
ContactInput
ContactInput
No.1 No.2 No.3
Level 1 Level 2 Level 3
No.1 No.2 No.3
Maximum pattern display
Maximum group number
63 Patterns
15 Groups
Maximum pattern display
Maximum group number
63 Patterns
15 Groups
Maximum pattern display
Maximum group number 31 Groups
-
Elapsed Time / Countdown / Cycle Time
3. Single-display Type
Error level / Request Priority / Status Display, etc.
L A6 SERIES
EditingSoftware
* Limited to Time Trigger and Pulse Trigger modes
②①
③
Editing software and pre-set data patterns are downloadable for free from our website.
Setups for the individual group operation can be executed. Pattern change timing can be setup with the editing software.
Transitions from one pattern to another can be triggered by setting elapsed time or by individual discrete inputs.
The product memory operates for the individual group functions.
http://www.patlite.comSearchSearchpatlite
Colors can be configured manually with the push button, without the need to edit the software.
21Color
* Data transfer is also possible when the main unit is OFF and the system's power source is the USB bus power.
Smart Mode
Signal Tower Mode
Ab. 0.5 sec.Finished!!
At first, red is selected.
All tiers begin flashing green.
Continue pushing for about 3 seconds to start selecting the desired LED color.
Push the setup key for about 0.5 second after
the power source is ON.Y
Ab. 3 sec. Ab. 3 sec.
Continue pushing for about 3 seconds to enter the selected LED color.
Ab. 0.5 sec.
Repeat for all tiers
R
G
B
WPV
LB
LY
Off
13 14
■ Smart Mode Inputs (for Mode Change)
Input1
Input2
Input3
Input4
Input5
Input6
Input7
Mode Change
Display Input
STOP
Mute
Clear
At Input
①Time-triggerType
②Pulse-triggerType
③Single-displayType
Trigger
Mute
Clear
Mute
Clear
Binary InputMaximum 15( (
Display Input
Binary InputMaximum 15( (
Display Input
Binary InputMaximum 31( (
Red
Amber
Green
Blue
White
Sky Blue
Purple
Pink
It can be used for the smart mode when a signal is applied to the
mode change line.
※ For connector inputs, mode change is terminal 11 purple ; and terminal 10 for the PoE type.
24V DC Wiring (LA6/LA6-POE)
LA6
24V DC (Class 2, Non-polar)
LED 5/ Input 5
Power Supply Wire
RedOrange
GreenBlue
White
Yellow
Flashing/Pulse EnableCommon Line Brown
Alarm 1/ Input 6
Mode Change
Power Supply Wire
Purple
Pink
Alarm 2/ Input 7 Sky Blue
Gray
ExternalContact
Flashing/
Pulse Enable
ExternalContact
Lighting/
Alarm
No Flashing/Alarm BN Flashing/Alarm
B Flashing/ Alarm Type
LED 4/ Input 4LED 3/ Input 3LED 2/ Input 2LED 1/ Input 1
PLC
EC
B
Circuit Diagram
LA6
No Flashing/Alarm BN Flashing/Alarm
24V DC (Class 2)B Flashing/ Alarm Type
Output Unit ②
Flashing/
Pulse Enable
Output Unit ①
Lighting/
Alarm
Don’t Apply VoltageDon’t Apply Voltage
LED 5/ Input 5
Power Supply Wire
Flashing/Pulse EnableCommon Line
Alarm 1/ Input 6
Mode Change
Power Supply Wire
Alarm 2/ Input 7
LED 4/ Input 4LED 3/ Input 3LED 2/ Input 2LED 1/ Input 1 Red
Orange
GreenBlue
White
Yellow
Brown
Purple
Pink
Sky Blue
Gray
External Contact Classi�cation Contact Relay External Contact Classi�cation PLC(NPN Transistor)
/ 119
1/ 1
2/ 2
3/ 3
4/ 4
9/ 7
8/ 6
10/ 11
7/ 5
6/ 10
5/ 8
/ 11
/ 22
/ 33
/ 44
/ 75
11/ 999
/ 86
/ 97
/ 1011
/ 610
/ 58
100 - 240V AC Wiring (LA6)
ExternalContact
Flashing/
Pulse Enable
ExternalContact
L N
LA6-5A
100 ~ 240V AC 100 ~ 240V AC
L N
Fuse1A
Common Line
Don’t Apply Voltage
B Flashing/Alarm
Fuse1A
PLC
Output Unit ②
Output Unit ①
B Flashing/Alarm
LA6-5A
Flashing/
Pulse Enable
EC
B
Circuit Diagram
Lighting/
Alarm
Lighting/
Alarm
B Flashing/ Alarm Type
Don’t Apply Voltage
RedOrange
GreenBlue
White
Yellow
Brown
Purple
Pink
Sky Blue
GrayBlack
Flashing/Pulse EnableCommon Line
LED 1/ Input 1LED 2/ Input 2LED 3/ Input 3LED 4/ Input 4LED 5/ Input 5Alarm 1/ Input 6Alarm 2/ Input 7Mode Change
Power Supply WirePower Supply Wire
Common Line
RedOrange
GreenBlue
White
Yellow
Brown
Purple
Pink
Sky Blue
GrayBlack
Flashing/Pulse EnableCommon Line
LED 1/ Input 1LED 2/ Input 2LED 3/ Input 3LED 4/ Input 4LED 5/ Input 5Alarm 1/ Input 6Alarm 2/ Input 7Mode Change
Power Supply WirePower Supply Wire
External Contact Classi�cation Contact Relay External Contact Classi�cation PLC(NPN Transistor)
External Contact Classi�cation Contact Relay
LED Tier 1 / Input 1
LED Tier 2 / Input 2
LED Tier 3 / Input 3
LED Tier 4 / Input 4
LED Tier 5 / Input 5
Power Supply Wire
Flashing/Pulse EnableCommon line
Alarm 1 / Input 6
Mode Change
Common line
Power Supply Wire
Alarm 2 / Input 7
ExternalContact 1
For Lighting
LA6-POE 〈Note〉Since �ashing and Pulse Enable Common are uncontrollable for a PoE input, do not connect it.
Do Not Use!
Do Not Use!
Do Not Apply Voltage!
MEMO
LAN Cable Connection
• Be sure to use the IEEE802.3af compliant products for the PoE power feeder systems.
• Priority is given to the 24V DC power supply when both the 24V DC power source and PoE power feeder systems are connected simultaneously.
• If both power sources are simultaneously connected, when disconnecting the 24V DC source, this product may reboot.
The LAN cable should be rated for category 5e or higher. A straight or cross cable can be used.
/ / Red ① 1
■ Wiring Diagram color and number indication
PoE Connector wire number Terminal connector wire numberCable signal wire number
Red indicates the lead wire color (for Cable type models) ※ The lead wire color does not indicate the LED luminescence color.
9
11
10
12
1
2
3
4
7
8
9
6
5
POE Wiring (LA6-POE)
■ Connector Inputs
LA6 LA6-POE(Terminal Type)
Stationary
Mounting Hole(φ5×3 places)
NameplateLocation
Product Front(Buzzer Diaphram)
ProductOutsideDimension
DistributionHole (φ26)
Direct Mount
Mounting Dimensional Drawing■
Mounting Hole(φ5x3 places)
Product Front(Buzzer Diaphram)
NameplateLocation
LAN Unit OuterDimensions
Mounting Dimensional Drawing■
φ40
120°
120°
116
120°120°
φ
■ Outer Dimensional Drawings ■ Wiring
DIMENSIONS AND WIRING
Red
Orange
Green
Blue
White
Gray
Black
Yellow
Gray
Black
Purple
LED 1/Input 1
LED 2/Input 2
LED 3/Input 3
LED 4/Input 4
LED 5/Input 5
Alarm 1/Input 6
Alarm 2/Input 7
Power Wire
Flashing/Pulse Enable Common
Power Line (Signal-line Side)
Mode Change
12
3
4
56
7
8
9
10
11
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Power Wire Flashing/PulseEnable Common
Power Line(Signal-line Side)
Mode Change
7
8
9
10
11
12
1
2
3
4
5
6 COM
Headcover(Mode Switch inside →※1)
LED Unit
LAN Bracket
Stand Cover
Base Plate
φ60
145
USB Cover(In Back) ※2
428
16
228
φ60
70
110
405
16
258
LAN Unit
“Clear” Switch
Nameplate(Backside)
LA6-5DSNWB-POELA6-5DTNWB-POE
Direct Mount Stationary
※ Be sure to check the wiring diagram of the PNP type transistor by visiting our website and viewing the comprehensive operation manual, etc.
※ Be sure to visiting our website and viewing the comprehensive operation manual, etc. for further details.
325
4.5
31
8166
Top View
Side View Rear View
60
20
81
2-φ11
φ22.5
φ5
Wire length: 1060Wire type: UL2464/AWG24
※1 Maximum Board thickness: 4 mm
■ TN Direct mount/TerminalD 24V DC
■ LJ Steel Polewith L-bracket/CableD 24V DC
■ WJ Direct mount/CableA 100-240V AC
■ L Dimensional Drawing forSteel Pole with L-bracket
313.5
< Overall Height >: 320 - : 254 - : 280 - : 214 -
BBNN
5353
110
70
- : 390
16
B5
φ60
10
8.5
(φ8.5)
< Overall Height >
※1
φ60
40
70
284
~
294
16
10
※3
φ60
40
70
16
20
8.5
< Overall Height >: 330 -
: 290: 264 -
: 224 - -
BBNN
5353
※2※1
Mounting Dimensional Drawing■
※3 Maximum Boardthickness: 16mm
※2 TN Underside ViewThreaded hole for cable gland attachment(M16×1.5 Effective screw length: 12mm)
Cablegland
<Note> The cable gland is notincluded with this product.
Wire length: 1360Wire type (Power): UL2464/AWG18Wire type (Signal): UL2464/AWG24
MountingHole (φ5)
OuterDimension ∅40
120° 120°
(Unit: mm)
(34.6)
6~17
Front Direction(Alarm Direction)
(10) 10
NameplateLocation
Wiring Hole (φ12※2)( TN Type)
※2 Use φ23 for Cable Gland
MountingHole (φ5)
MountingHole (φ5)
LA6 LA6-POE