Generic FPSO Concept Slideshow

1Generic FPSO Concept

22

Generic FPSO Concept

Starting with a mild steel Suezmax vessel

33


Bow and stern sections are cut from the cargo (mid) section

44


Bow and stern sections are used to build a heavy lift vessel.

Cargo section free to be used for FPSO.

55


New bow and stern sections are fabricated.

These will be tailor-made for FPSO service

(prepared for turret, for utility systems etc).

66


The resulting hull combines the opportunities of a tailor-made

solution with the price & schedule of a conversion project.

Adding a newbuilt accommodation block designed for FPSOservice, including helideck, meeting rooms, control room,laboratory etc

77


The generic topside consists of a separation module and flare system

The generic topside may consist of a separation module

and flare system.

88


An E-house is arranged aft on deck, designed with flexibilityto be extended for a range of topside sizes

Extra power generation may be arranged

An E-house is arranged aft on deck,

designed with flexibility to be extended

for a range of topside sizes.

99


Water injection module typically arranged forward of power generation.

Extra power generation may be arranged.

1010


Gas compression arranged far from

accommodation and close to risers.

1111


Additional production capacity installed.

1212


Additional water injection capacity installed.

1313


Additional gas compression installed.

Still there is room for more modules

say for subsea pump support systems.

1414


Mooring system may be spread mooring

with risers over a riser balcony, where this fits the

area & environment

1515


or it comes with an internal

turret, disconnectable, similar to

the solution used for the FPSOFront Puffin

1616


...or an external turret

1717

...story to be continued


Generic FPSO Concept Slideshow

Documents

Transcript of Generic FPSO Concept Slideshow