controller subsystem Harmony - Holtek · 2020. 5. 7. · CatB CatC LL 2.4 Setups used for Testing...
Transcript of controller subsystem Harmony - Holtek · 2020. 5. 7. · CatB CatC LL 2.4 Setups used for Testing...
-
Produkte Products
TUV Rheinland Taiwan Ltd. 11F., No. 758, Sec. 4, Bade Rd., Taipei 105, Taiwan, R.O.C.
Prüfbericht-Nr.: Test Report No.:
50280391-001 Auftrags-Nr.: Order No.:
238107535 Seite 1 von 10 Page 1 of 10
Kunden-Referenz-Nr.: Client Reference No.:
N/A Auftragsdatum: Order date:
17-Jun-2019
Auftraggeber: Client:
Holtek No. 3, Creation Rd. II, Science Par TW-300 Hsinchu Taiwan, R.O.C
Prüfgegenstand: Test item:
BC7161
Bezeichnung / Typ-Nr.: Identification / Type No.:
001
Auftrags-Inhalt: Order content:
Bluetooth Protocol testing
Prüfgrundlage: Test specification:
Bluetooth Protocol test specification (Please refer to clause 3.3 of the test report)
Wareneingangsdatum: Date of receipt:
29-07-2019
Prüfmuster-Nr.: Test sample No.:
A000965676-002
Prüfzeitraum: Testing period:
19-07-2019 – 19-07-2019
Ort der Prüfung: Place of testing:
TÜV Rheinland Taiwan Ltd.
Prüflaboratorium: Testing laboratory:
TUV Rheinland Taiwan Ltd.
Prüfergebnis*: Test result*:
Pass
Test pictures see pages 34.
Report date / tested by:
2019-08-06 Frankie Lin/Section Manager
kontrolliert von / reviewed by:
2019-08-06 Brenda Chen/Project Manager Datum
Date Name / Stellung Name / Position
Unterschrift Signature
Datum Date
Name / Stellung Name / Position
Unterschrift Signature
Sonstiges / Other: Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery:
Prüfmuster vollständig und unbeschädigt Test item complete and undamaged
* Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft
P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet
Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested
Dieser Prüfbericht bezieht sich nur auf das o.g. Prüf muster und darf ohne Genehmigung der Prüfstelle nich t auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens.
This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark.
-
Reference: 50280391-001
Final Report Page 2 of 10
1 Administrative Data 1.1 Project Data Project Responsible: Frankie Lin
Date of Test Report: 2019/08/06
Date of first test: 2019/07/19
Date of last test: 2019/07/19 1.2 Applicant Data Computer Name: Holtek
Address: No. 3, Creation Rd. II, Science Par TW-300 Hsinchu Taiwan, R.O.C
Contact Person: Walers
1.3 Test Laboratory Data The following list shows all places and laboratories involved for test result generation: TÜV Rheinland – Taiwan Company Name : TÜV Rheinland Taiwan Ltd.
Street : 11F, No.758, Sec. 4, Bade Rd.,
City : 105 Taipei
Country : Taiwan
Contact Person : Mr. Frankie Lin
Phone : +886 2 2172 7000 #1008
Fax : +886 2 2528 0018
E Mail : [email protected]
Laboratory Details
Lab ID Identification Responsible Accreditation Info
Lab2 Bluetooth Mr. Arvin Ho TAF registration no: TAF-3567 Protocol
Laboratory
-
Reference: 50280391-001
Final Report Page 3 of 10
2 Test Object Data
2.1 General OUT Description The following section list all OUTs (Object’s Under Test) involved during testing: OUT: BC7161 Type / Model / Family: BC7161 Model: 001 Product Category: Unique Products Manufacturer:
Company Nme: Holtek
Address: No. 3, Creation Rd. II, Science Par TW-300 Hsinchu Taiwan, R.O.C
Contact Person: Walers
2.2 Detailed Description of OUT Samples
Sample : A000965676-001
OUT Identifier BC7161
Sample Description Beacon Transmitter
Serial No. n/a
HW Status 001
SW Status 001
Date of Receipt 2019/07/19
Nominal Voltage 3.3 V
-
Reference: 50280391-001
Final Report Page 4 of 10
Parameter List:
Parameter name Value
Parameter for PIXIT adv_interval_max=0x4000
adv_interval_min=0x0020
adv_event_type=0x01
adv_channel_mask=0x07
adv_tx_power=127
primary_adv_phy=1
secondary_adv_max_skip=0
secondary_adv_phy=1
adv_data_operation=3
adv_data_frag_pref=1
adv_sets_max=3
scan_phy=0x0001
scan_interval=0x0010
scan_window=0x0010
scan_filter=0x00
scan_duration=0x0000
scan_period=0x0000
scan_max_data=256
scan_max_coded_range=1
max_conn=4
conn_interval_max=0x0C80
conn_interval_min=0x0006
conn_timeout=1000
conn_latency=0
ce_length_min=0
ce_length_max=0
tx_octets_default=37
tx_time_default=328
rx_octets_max=251
rx_time_max=17040
tx_octets_max=251
tx_time_max=17040
data_frag_align=0
hc_acl_data_packet_len=58
enc_ltk_msw=0x4C68384139F574D8
enc_ltk_lsw=0x36BCF34E9DFB01BF
enc_random_number=0xABCDEF1234567890
enc_diversifier=0x2474
peer_irk_msw=0x534A3934352D5242
peer_irk_lsw=0x217761482D656548
local_irk_msw=0x73394d5b54169056
local_irk_lsw=0x5755ad35ea02b4cf
rpa_timeout=15
phy_support_asymm=1
aa_tolerance_mask=0x00000000
-
Reference: 50280391-001
Final Report Page 5 of 10
2.3 OUT Features Features for OUT: LL
-
Reference: 50280391-001
Final Report Page 6 of 10
-
Reference: 50280391-001
Final Report Page 7 of 10
Additional information for scope: CatA CatB CatC LL
2.4 Setups used for Testing For each setup a relation is given to determine if and which samples and auxiliary equipment is used. The left side list all OUT samples and the right side lists all auxiliary equipment for the given setup. Setup No. List of OUT samples List of auxiliary equipment Sample No. Sample Description AE No. AE Description
A000965676-002 (Beacon Transmitter) Sample: BC7161 Beacon Transmitter
3 Results
3.1 General
Documentation of tested Available at the test laboratory. devices: Interpretation of the The results of the inspection are described on the following Test results: pages, where ‘Conformity’ or ‘Passed’ means that the certification criteria were verified and that the tested device is conform to the applied standard. In cases where ‘Declaration’ is printed, the required documents are available in the manufacturers product documentation. In cases where ‘not applicable’ is printed, the test case requirements are not relevant to the specific equipment implementation.
3.2 List of the Applicable Body
Description Description
SIG TCRL Core 2019-01-28 Test Case Reference List for Core and Host version 2.0 – 5.1 and later released 2019-01-28
3.3 List of Test Specification
Test Specification: LL Date / Version 2019/01/28 Version: LL.TS/5.1.0 Title: LL TSS and TP Description: Link Layer
-
Reference: 50280391-001
Final Report Page 8 of 10
3.4 Summary
Test Case Identifier / Name
4 Test Equipment Details 4.1 List of Used Test Equipment
The hardware and software status are shown for the testing period. Test Equipment Interoperability Laboratory Lab ID: Lab 2 Description: Bluetooth Protocol Lab. Single Devices for Bluetooth Protocol Laboratory Single Device Name Type Serial Number Manufacturer
Bluetooth Tester Harmony n/a Frontline HW/SW Status
Build 19.1.6916.18388
4.2 Laboratory Environmental Conditions Laboratory Date Temperature Humidity Air Pressure
Lab 2 2019/07/19 24℃ 47% 1010 hPa
-
Reference: 50280391-001
Final Report Page 9 of 10
5 Annex
5.1 Additional Information for Sample Description
-
Reference: 50280391-001
Final Report Page 10 of 10
6 Index 1 Administrative Data 2 …………………………………………………………………………………………………………………………………………………………………………
1.1 Project Data 2 …………………………………………………………………………………………………………………………………………………………………………
1.2 Applicant Data 2 …………………………………………………………………………………………………………………………………………………………………………
1.3 Test Laboratory Data 2 ………………………………………………………………………………………………………………………………………………………………………… 2 Test Object Data 3 …………………………………………………………………………………………………………………………………………………………………………
2.1 General OUT Description 3 …………………………………………………………………………………………………………………………………………………………………………
2.2 Detailed Description of OUT Samples 3 …………………………………………………………………………………………………………………………………………………………………………
2.3 OUT Feature 5 ………………………………………………………………………………………………………………………………………………………………………… 2.4 Setups used for Testing 7 ………………………………………………………………………………………………………………………………………………………………………… 3 Results 7 …………………………………………………………………………………………………………………………………………………………………………
3.1 General 7 …………………………………………………………………………………………………………………………………………………………………………
3.2 List of Test Specification 7 …………………………………………………………………………………………………………………………………………………………………………
3.3 List of Test Specification 7 ………………………………………………………………………………………………………………………………………………………………………… 3.4 Summary 8
………………………………………………………………………………………………………………………………………………………………………… 4 Test Equipment Details 8 …………………………………………………………………………………………………………………………………………………………………………
4.1 List of Used Test Equipment 8 …………………………………………………………………………………………………………………………………………………………………………
4.2 Laboratory Environmental Conditions 8 ………………………………………………………………………………………………………………………………………………………………………… 5 Annex 9 …………………………………………………………………………………………………………………………………………………………………………
5.1 Additional Information for Sample Description 9 ………………………………………………………………………………………………………………………………………………………………………… 6 Index 10 …………………………………………………………………………………………………………………………………………………………………………