Butterfly Eng
Transcript of Butterfly Eng
8/10/2019 Butterfly Eng
http://slidepdf.com/reader/full/butterfly-eng 1/6
DBV-WF/LUSERIES
8/10/2019 Butterfly Eng
http://slidepdf.com/reader/full/butterfly-eng 2/6
DBV-WF/LU SERIES2”- 24” (50mm-600mm)
Dorot is proud to offer a high quality line of butteryvalves to meet the requirements of today’s market.Combining years of eld experience, research and
development, Dorot has added numerous uniquefeatures to the Series DBV- WF/ LU.The results are longer service life, greater reliability,ease of parts replacement and interchangeability ofcomponents.
Design FeaturesDorot’s Series DBV: WF (Wafer) valve or a versionwith threaded bores- the LU valve.Flange-locating Lug version can be used for dead-end service. All Dorot valves are tested to 110% offull pressure rating before shipment.
A major design advantage of Dorot valve product
lines is international compatibility. The same valveis compatible with most world ange standards- ANSI Class 125/150, BS 10 Tables D & E, BS4504
NP 10/16, DIN ND10/16, AS 2129 and JIS 10. Inaddition, the valves are designed to comply with ISO5752 face-to-face and ISO 5211 actuator mountinganges.Therefore, one valve design can be used in manydifferent world markets. Due to a modular concept ofdesign, Dorot manual levers or gear operators canbe mounted directly on Dorot valves, No brackets oradapters are required.Dorot interchangeability and compatibility offersyou the best uniformity of product line and low- costperformance.
Product Advantages• Wafer or Lug- style valve, to be installed between
two anges at any position.• Sealed stem and gear provide longer life span.• Low torque required to activate the valve under pressure, due to low- friction stem bushing.• Can be installed in a manhole, the extra long neck
allows easy activation.• Square stem, allowing convenient assembly of gear
box and pneumatic / electric actuators.
Application• Pumping stations• Irrigation main lines and block isolation• Municipal water networks• Industrial water supply• Cooling towers
LU
WF
8/10/2019 Butterfly Eng
http://slidepdf.com/reader/full/butterfly-eng 3/6
Dimensions of Series DBV-WF/LU Valves
MLdn x Ø HGFEDCBAValve Size
mminchmminchmminchmminchmminchmminchmminchmminchmminchmminchmminchmminch110.5431.712.70.5104x0.4903.5702.8963.8803.1321.31425.652.62502
110.5461.812.70.5104x0.4903.5702.81164.6893.5321.31556.164.42.5652.5
110.5461.812.70.5104x0.4903.5702.81325.2953.7321.31616.378.93803
110.552215.90.6104x0.4903.5702.815261144.5321.31807.1104.14.11004
140.6562.219.10.8104x0.4903.5702.81827.21275321.31937.6123.44.91255
140.6562.219.10.8104x0.4903.5702.82058.11395.5321.32058.11566.11506
170.7602.422.20.9124x0.51254.9102426010.21756.9401.62509.8202.982008220.9682.728.61.1124x0.51254.9102431512.42038401.628211.1250.99.925010
220.9783.131.81.3124x0.51254.9102437114.62429.5401.632612.8301.911.930012
220.9783.131.81.3124x0.51254.9102442116.626710.5401.635814.133413.135014
220.9102/884/3.538.11.5184x0.71756.91405.547118.630111.6522.13801539015.440016
271.1114/4.5/4.241.31.6184x0.71756.91405.552620.738115522.14221644117.445018
271.1127544.51.8184x0.71756.91405.557522.638715.2642.547918.9492.319.450020
361.41546.150.82234x0.92108.31656.56862745718702.856222.159323.460024
Weights
Series LULever
Series WFLever
Series LUGear
Series WFGearValve Size
kglbkglbkglbkglbmminch3.16.81.63.54.59.936.6502
48.824.45.411.93.47.5652.5
4.49.72.45.35.311.73.88.4803
6.514.336.67.917.44.49.71004
10.6244.61012276131255
112451112.5286.5141506
24531635265718402008
4599286247104306625010
53117327159130388430012
551213679741635512135014
922036113540016
1052317917445018
17338112828250020
24052918841460024 ØAØA
ØE
ØF
ØG
D
B
C
D
B
C
M
nxØH
Ød
L
8/10/2019 Butterfly Eng
http://slidepdf.com/reader/full/butterfly-eng 4/6
Installation1. Locate the disc in a partially- open position.2. Place the valve body between the pipe anges and
install ange bolts. Do not use ange gaskets.3. Carefully open the disc to the fully-open position, ensure
proper alignment with the adjacent pipes.4. Leave disc in the fully-open position and tighten ange
bolts per required specications. Once bolts aretightened, then carefully move the disc to “closed” position.
5. Horizontal position of the stem is preferred.
Maintenance and RepairThe high performance features minimize wear andmaintenance requirements. No routine lubrication is required.
All components - stem, disc, seat, bushing stem seal etc. are
eld- replaceable, no adjustment is needed. If componentsrequire replacement, remove the valve from the line:locate the disc in “closed” position, spread the anges,support the valve, and then remove the ange bolts. Novalve maintenance, including removal of manual or poweractuators, should be performed until the piping system iscompletely depressurized.
Selection DataSpecications of DOROT Series DBV- WF/ LU:
• Epoxy coated Ductile iron, wafer or lug bodies.
• Series LU: Lug- type with ange- locating bores to ANSI 125/150, BS 10 Tables D & E, BS4504 PN 10/16, DIN ND10/16, AS 2129
or JIS 10 standards.
• Mechanically-retained Stem in body neck. No part of stem or body is exposed to pipeline media.
• For weld- neck and slip- on anges, the seat is totally encapsulates the body. No ange gaskets
are required.
• Spherically- machined, hand polished disc providing excellent sealing.
• Non-corrosive bearings.
• Bi-directional ow, tested to 110% of pressure rating.
• Pressure rating: - 2”- 12” valves are rated 230psi / PN16 - 14”- 20” valves are rated 150psi / PN10
Lug bodies used at dead- end service,with downstream anges, pressure ratings areas stated above.
• Zero- Outlet pressure, without downstream ange: - 2”- 12” valves are rated 75psi / PN6 - 14”- 20” valves are rated 50psi / PN4
• No eld adjustment is necessary to maintain optimum eld performance.
8/10/2019 Butterfly Eng
http://slidepdf.com/reader/full/butterfly-eng 5/6
Components No. Qty Description
1 1 Thrust Washer
2 1 Retaining Ring
3 2 O-Ring
4 3 Bearings
5 1 O-Ring
6 1 Disc
7 1 Stem
8 1 Seal9 1 Body
Material selection BODY
• D - Ductile iron ASTM A536 (standard)
SEAL
• E - EPDM (standard)
• N - Buna-N
STEM
• S4 - 410SS ASTM A582 Type 410 (standard)
• S3 - 316SS ASTM A276 Type 316
DISC
• DI - Electro- feritic Coated Ductile Iron ASTM
A536 (standard)
• AL - Aluminum Bronze ASTM B148-954
• SS - 316 SS ASTM A351 CF8M
Operating Temperature Range of Seals
Type Minimum MaximumEPDM -40ºF (-40ºC) +250ºF (121ºC)
BUNA-N 0ºF (-18ºC) +212ºF (100ºC)
Valve Actuators1 G - Gear actuator
2 H - Hand Lever 3 P - Pneumatic actuators
1
2
3
1
8
9
7
2
3
4
7
5
6
8/10/2019 Butterfly Eng
http://slidepdf.com/reader/full/butterfly-eng 6/6
w w w . d o r o t . c o m • E - m a i l : i n f o _ d @ d o r o t . c o m
DOROT AUTOMATIC CONTROL VALVES
Founded in 1946, DOROT is a leading developer, manufacturer and marketer
of a wide range of superior quality automatic control valves. DOROT’sexperienced Research & Development Dept. has a long tradition of generatinginnovative solutions for the application of water control systems. Theseinclude, waterworks distribution networks, sewage and efuent disposal,re protection, mining and irrigation systems.
DOROT’s commitment to excellence begins with using the highest qualitymaterials. The company’s engineering experts are constantly working toprovide customers with a broad range of valve patterns and sizes in a widevariety of metals and grades including: Cast Iron, Ductile Iron, Cast Steel,SST, Bronze, Marine Bronze, Polyamide and P.V.C.
The experts at DOROT custom-design each valve application according tospecic control requirements. Most of the production process, whichincludes machining and coating, takes place in modern in-house facilities.Before leaving the factory, each product is hydraulically tested. An advancedtesting laboratory simulates the anticipated eld conditions.
With distribution in more than 70 countries world-wide, a key componentof the DOROT difference is its outstanding customer service. This includeseld assistance, technical advice, training programs and follow-upconsultations.
It is all of these factors that make DOROT a leader in uid control technologyand customer satisfaction.
Ordering guide:Example: DBV - LG - 4 - ANSI cl.150 - D - N - S4 - SS - GLug type, 100mm size, matching ANSI150 anges, DI body, Buna-N seal, SST410 stem, SST316 Disc,Gear- actuated
Valve size(inch)2 to 24
Flange standardWF=0LG=ANSI, ISO,JIS, AS (specify)
BodyD-Ductile Iron
SealE-EPDMN-Buna N
StemS4 -SST410S3 -SST316
DiscDI-Ductile ironAL-AlumBronzeSS -SST316
Actuator G-Gear L-Lever P -Pneumatic
Valve typeWFLG
DBV - LG - 4 - ANSI cl.150 - D - N - S4 - SS - G