Batch ovens

2
wall- and floor-mounted configurations for virtually every paint circulating situ- ation in new or upgraded facilities. Circle 411 on the reader service card Blackening Process for Iron and Steel Frederick Gumm Chemical Co. Inc. Keamy, N.J. Clepox Ferri-Black LC is a concen- trated liquid used for blackening iron and steel by simple immersion. Uni- form black coatings of ferroferric ox- ide are produced. Since it is supplied as a liquid, it is safer than powders as it eliminates the need for mixing and handling of caustic-containing pow- dered products, which can cause erup- tions in boiling solutions. Clepox Ferri-Black LC contains complexing agents that eliminate the effects of cop- per and iron contamination in the blackening solution. Circle 412 on the reed.9 service card Rotary Basket Washer Guyson Corp. of U.S.A. Saratoga Springs, N. Y. Guyson Corp. has introduced a larger capacity model in its line of industrial rotary basket spraywash Circle 020 on reader information card systems, the Marr Orbit 1000. The unit has a 43-in. diameter basket and holds up to 440 lb of components with a maximum P-in. part height. The basket, tank, and shell of the wash system are fabricated in stain- less steel to resist corrosion by hot aqueous cleaning solutions. A total of 32 “V-spray” jets are positioned on spraybars surrounding the rotating basket on three sides. Circle 413 on the reader service card Batch Ovens Geoge Koch Sons Inc. Evansville, Ind. George Koch Sons has introduced a family of batch ovens for curing, drying, and heating. Five proven oven designs offer quality and reli- ability at an economical price. Koch’s standard ovens are available in the most popular sizes with all necessary safety equipment as well II t DISPOSARLE, SLW-ON DARQLRR RRADIW.. *SAVE PLATING TIME *PROLONG CABLE LIFE AND *PERFORM FOR PENNIES U.S. Pat. #4,111,761 NO LOST PLATINQ TIME. Slip off built-upheeds. sndslipon fresh,new heeds without removing Dengbr Aaswnbfy from berm/. LOWBRR CABLE LIPL. Refnovhg heads belore the pfetfng buildup is e&w pmbngs the If8 of the Dengbr Assembiy. IW#X#mH. Field studfes have shown tfwt using our diqhxabb heads cos1.s just pennfes per bane/ load to use. CHANQE HEADS IN SeCUNDS NEW DANGLERS LEAD THE WAY TO IMPORTANT PRODUCTION ECONOMY. INC. 35 Oa&dale A-, Johmto8, RI 02579 Phont3mx: (40$) 2m-7742 *Danglers are patented in the United States, Foreign Rights reserved. Distributor Inquiries Invited Circle 016 on reader information card METAL FINISHING . DECEMBER 1997 57

Transcript of Batch ovens

wall- and floor-mounted configurations for virtually every paint circulating situ- ation in new or upgraded facilities.

Circle 411 on the reader service card

Blackening Process for Iron and Steel Frederick Gumm Chemical Co. Inc. Keamy, N.J.

Clepox Ferri-Black LC is a concen- trated liquid used for blackening iron and steel by simple immersion. Uni- form black coatings of ferroferric ox- ide are produced. Since it is supplied as a liquid, it is safer than powders as it eliminates the need for mixing and handling of caustic-containing pow- dered products, which can cause erup- tions in boiling solutions. Clepox Ferri-Black LC contains complexing agents that eliminate the effects of cop- per and iron contamination in the blackening solution.

Circle 412 on the reed.9 service card

Rotary Basket Washer Guyson Corp. of U.S.A. Sara toga Springs, N. Y.

Guyson Corp. has introduced a larger capacity model in its line of industrial rotary basket spraywash

Circle 020 on reader information card

systems, the Marr Orbit 1000. The unit has a 43-in. diameter basket and holds up to 440 lb of components with a maximum P-in. part height. The basket, tank, and shell of the wash system are fabricated in stain- less steel to resist corrosion by hot aqueous cleaning solutions. A total of 32 “V-spray” jets are positioned on spraybars surrounding the rotating basket on three sides.

Circle 413 on the reader service card

Batch Ovens Geoge Koch Sons Inc. Evansville, Ind.

George Koch Sons has introduced a family of batch ovens for curing, drying, and heating. Five proven oven designs offer quality and reli- ability at an economical price. Koch’s standard ovens are available in the most popular sizes with all necessary safety equipment as well

II

t

DISPOSARLE, SLW-ON DARQLRR RRADIW.. *SAVE PLATING TIME

*PROLONG CABLE LIFE AND

*PERFORM FOR PENNIES

U.S. Pat. #4,111,761

NO LOST PLATINQ TIME. Slip off built-upheeds. sndslipon fresh, new heeds without removing Dengbr Aaswnbfy from berm/. LOWBRR CABLE LIPL. Refnovhg heads belore the pfetfng buildup is e&w pmbngs the If8 of the Dengbr Assembiy. IW#X#mH. Field studfes have shown tfwt using our diqhxabb heads cos1.s just pennfes per bane/ load to use.

CHANQE HEADS IN SeCUNDS NEW DANGLERS LEAD THE WAY TO

IMPORTANT PRODUCTION ECONOMY.

INC.

35 Oa&dale A-, Johmto8, RI 02579 Phont3mx: (40$) 2m-7742

*Danglers are patented in the United States, Foreign Rights reserved. Distributor Inquiries Invited

Circle 016 on reader information card

METAL FINISHING . DECEMBER 1997 57

as a variety of options. A standard oven uses electrical heaters and dig- ital-indicating temperature controller to reach temperatures up to 500°F. Additional control equipment in-

cludes batch timer and chart recorder. A forced-air circulation system pro- vides maximum heat distribution.

Circle 414 on the reader servlce card

Air Filtration System La-Man Corp. Poti Orange, F/a.

The Model 520 Extractor/Dryer Fil- tration System removes harmful mois- ture and contaminants from com- pressed air lines without an additional power supply. It has an airflow capac- ity of 15 scfm and removes tiny parti- cles of dirt, dust, oil, rust, and mois- ture. The modularly designed Model 520 features a two-stage filtration sys- tem. Dew points range from 10 to 35°F at atmosphere. The 520 comes stan- dard with a 5-micron rating with lower micron ratings available. lko config- urations are available-Model 520A and 520B. The 520A comes equipped with top ports, and options include a

Industry leader Aldoa has been helping aluminum processors get top quality results for nearly 50 years. To keep you ahead of your competitors, Aldoa now offers several products from their research and development labs-which can help you satisfy your customers more than ever:

Aldac DAC AL -to clean aluminum heat exchangers Aldac 6A -a non-etch type alkaline cleaner AND - to produce

Aldac 7AE -an etch-type alkaline cleaner chromate conversion

Aldosal ADO -Aluminum de-oxidizing salts coatings on aluminum:

Aldosal APS -Aluminum pickling salts Order - Aldo Kote ACI

Aldozal -A zincating process for ACI M2

aluminum prior to plating ACI 92

Anolok 2698 -A nickel acetate-based seal for AZ 1227

anodized aluminum coatings

Aldoa also offers &g+ - from a wide spectrum of colors for coating anodized aluminum

Circle CO4 on reader information card

cycle drain, float drain, or electronic drain. The 520B comes equipped with side ports, and options include a cycle drain, float drain, or electronic drain as well as a Delta P Gauge or a Delta P Switch Gauge.

Circle 415 on the reader service card

Spray Gun Kremlin Inc. Addison, III.

Kremlin Inc.‘s improved Airmix gun, the MX LT, is designed for coat- ing surfaces such as metal, wood, and plastic. The light, medium-pressure gun comes standard with a fluid tube with filter. The MX LT features spe- cially designed fast-flush, stainless steel -fluid passages that reduce ma- terial and solvent waste. It is a com- pact, well-balanced gun, fitted with an easy-to-use gun handle and a new and improved light trigger for a bet- ter grip and reduction of operator fatigue.

Circle 416 on the reader service card

Automatic Parts Washers Landa Inc. Portland, Ore.

Landa has introduced a new line of front-load, automatic parts washers. In the new line of SJ solvent-free parts washers the water-propelled spray arm is turned upright on a vertical axis so that large parts, including entire engine blocks, can be blasted by the spray from a whirling spray bar. Parts are blasted up to 200 times per minute by whirling, focused cleaning power from 26 zip tip nozzles. An optional adjust- able spray bar can be moved up or down to put the spray action within a few inches. of the parts being cleaned. The two models, SJ-250 and SJ-150, can handle loads of up to 40 in. in height. The SJ-250 has a basket 36 in.

58 METAL FINISHING ?? DECEMBER 1997