8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 1/72
E N GL I S H
ENMEMORY CAMERA
GUIDEBOOK
LYT1994-002A-M
Dear CustomerThank you for purchasingthis memory camera. Beforeuse, please read the safetyinformation and precautions
contained in pages 2 and 3 toensure safe use of this product.
For Future Reference:Enter the Model No. (locatedon the bottom of the memorycamera) and Serial No. (locatedon the battery pack mount of thememory camera) below.
Model No.Serial No.
GZ-MS120 U
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 2/72
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 3/723
E N GL I S H
IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Only use attachments/accessories specified by
the manufacturer.
10. Use only with the cart,
stand, tripod, bracket,or table specified by
the manufacturer,
or sold with the
apparatus. When a cart
is used, use caution
when moving the
cart/apparatus combination to avoid injury from
tip-over.
11. Unplug this apparatus during lightning storms
or when unused for long periods of time.
12. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Remember that this camcorder is intended forprivate consumer use only.
Any commercial use without proper permissionis prohibited. (Even if you record an event such
as a show, performance or exhibition for personal
enjoyment, it is strongly recommended that you
obtain permission beforehand.)
Trademarks
• Manufactured under license from DolbyLaboratories. Dolby and double-D symbol are
trademarks of Dolby Laboratories.
• Windows ® is either registered trademark or
trademark of Microsoft Corporation in the UnitedStates and/or other countries.
• Macintosh is a registered trademark of Apple
Inc.
• iTunes is a trademark of Apple Inc., registered
in the U.S. and other countries.• YouTube and the YouTube logo are trademarks
and/or registered trademarks of YouTube LLC.
• Other product and company names includedin this instruction manual are trademarks
and/or registered trademarks of their respective
holders.
If this symbol is shown, it is onlyvalid in the European Union.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 4/724
Easy Start Guide
Charge the Battery Before Recording
Turn off the camcorder and attach the battery pack.
Battery Pack
AC AdapterTo AC Outlet(110V to 240V)
Power/charge lamp
blinks: Charginggoes out: Charging finished
Access lamp
blinks: Accessing files
The battery pack is notcharged at the time ofpurchase.
CAUTION
• Be sure to use JVC battery packs. If you use any other battery packs besidesJVC battery packs, safety and performance can not be guaranteed.
B A
Open the cover
Do not remove the AC adapter, thebattery pack or the SD card whenthe lamp is blinking.
Insert the SD Card
Slot B Slot A
Firmly insert the card.
1. Insert and remove the SD card only
while the power is turned off. Otherwise,
data on the card may be corrupted.2. Format an SD card when using it for the
first time. (Z p. 58)
Press Power ( ) button to turn off the camcorder.
( )
Grip Adjustment
• Do not pull the strap when you open
the fasten. Please pull the tab to
open it.
• Fasten the strap when you grip the
camcorder.
• When carrying the camcorder,please be careful not to drop it.
Grip Strap
Fasten
Tab
Adjust the strap and fasten.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 5/725
E N GL I S H
Date/Time Setting
Open the LCD monitor to
turn on the camcorderQ
Select [YES] within
10 secondsRSlide your finger up and down on the
sensor. Then touch OK. (Z p. 9)
Select [CLOCK SETTING] S
Set the date and time V
SAVE QUIT
CLOCK SETTING
GMT 0:00
DATE TIME
04 55 PM1 2009NOV
LCD monitor
• When the message disappears, pressthe power button for at least 2 secondsto turn off the power, and then press it
again for at least 2 seconds.
• Touch the sensors with your finger. Thesensors do not function if you touchthem with your finger nail or with gloveson.
QUIT
SET THE CITY, DATE AND TIME
@
CLOCK SETTING
AREA SETTING
SET FOR DAYLIGHT SAVING TIME
CLOCK ADJUST
Select the city closest tothe area where you use
the camcorder
T
AREA SETTING
SET QUIT
GMT : JAN.1. 2009 01:00AM
Select [ON] or [OFF]
USelect [ON] if daylight saving time iseffective.
SET QUIT
SET DAYLIGHT SAVING TIME
JAN.1. 2009 01:00AM
SET FOR DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME (DST)
OFF
Touch sensor: Sets the date and time
➜: Moves the cursor to the right
OK: Clock starts
Power button ( )
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 6/726
Video Recording
• Before recording an important scene, it is recommended to conduct a trial
recording.
CAUTION
Slide the mode switch to select ! (video) modeQ
0 : 0 4 : 0 1
[ 4h59m ]
REC
The mode changes whenyou press the button.
Press the START/STOP
button to start recording,and press it again to stop.
Start recording SRemaining space onthe SD Card
Record-standbyVideo Quality
Recording
Select recording modeR
REC
The auto recordingindicator appears.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 7/727
E N GL I S HPlaying Back
Select playback mode
Q
The mode changes whenyou press the button.
Select the desired fileR
, DIGEST
VIDEO PLAYBACK
NOV. 01. 2009 4:55PM
1/2
Index screen
J
K
04:55PM
0:00:42
NOV. 1. 2009
Q KJL
B
Playback screen
L To perform operations such as forward search or reverse search (Z p. 24)
L To view files on TV (Z p. 31)
Do not forget to make copies after recording!• To copy files onto DVD discs (Z p. 45)
• To dub files using a VCR/DVD recorder (Z p. 50)
• To play back a created DVD disc (Z p. 44)
• To edit files on your computer (Z p. 45)
CAUTION
Select (Touch OK)S
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 8/72
Contents
GETTING STARTED
Accessories .......................................... 11Attaching the Core Filter ..............................11
Index ...................................................... 12
Indications on LCD Monitor ................. 14
Necessary Settings before Use ........... 16Charging the Battery Pack ........................... 16Date/Time Setting ........................................16Language Setting ........................................17
Other Settings ....................................... 18Grip Adjustment ...........................................18Tripod Mounting ...........................................18Using an SD Card ........................................ 19
RECORDING/PLAYBACK
Recording Files ..................................... 20Video Recording ..........................................20Still Image Recording ..................................21Zooming.......................................................22LED Light .....................................................22Checking the Remaining Battery Power ...... 22Checking the Remaining Space on the
Recording Media ........................................23Registering Files to Events .......................... 23
Playing Back Files ................................ 24Video Playback ............................................24Still Image Playback ....................................25File Search Function....................................26To Play Back MPG Files .............................. 27
Manual Recording ............................... 28Changing to Manual Recording Mode ......... 28Backlight Compensation ..............................28
Manual Setting in Menu ...............................28
USING WITH TV
Viewing Files on TV .............................. 31Connection with TV......................................31Playback Operation .....................................31
EDITING
Managing Files ...................................... 32Capturing a Still Image from a Video ........... 32Deleting Files ...............................................32
Protecting Files ............................................34Viewing File Information ..............................35Changing the Event Registration .................36Trimming Files .............................................37
Playlists ................................................. 38Creating Playlists .........................................38Playing Back Playlists ..................................39Other Operations of Playlists ....................... 39
COPYING
Copying Files ........................................ 40Copying/Moving Files ..................................40Using a DVD Burner ....................................41Creating a DVD using a PC ......................... 45Dubbing Files to VCR/DVD Recorder .......... 50
Using with a Portable Media Player .... 51Turning on the Export Mode ........................51Changing the Export Setting .......................51Transferring the Files to PC ......................... 52
Uploading Files to Websites ................ 53Turning on the Upload Mode .......................53Upload Trimming .......................................... 53Uploading Files ............................................54
FURTHER INFORMATION
Changing the Menu Settings ............... 55
Troubleshooting.................................... 59Warning Indications ............................. 63
Cleaning ................................................ 65
Specifications ....................................... 66
Cautions ................................................ 68
Terms ..................................................... 72
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 9/729
E N GL I S H
R E C OR D I N G /
P L A Y B A C K
GE T T I N G
S T A R T E D
U S I N G
WI T H T V
F U R T H E R
I N F OR MA T I ON
C OP Y I N G
E D I T I N G
How to use the TouchSensorAfter the menu is displayed on the LCD monitor:
VIDEO
DUBBING PLAYBACK
PLAYBACK MPG FILE
ON-SCREEN DISPLAY
SET QUIT
SWITCH DISPLAYED CONTENTS
EDIT
l
Q
R
Q Slide your finger up and down on the sensor.
R Select [SET]. (Touch OK.)
A
B
A To select an on-screen button appearing on
the left side, touch the portion of the sensornext to the on-screen button.
B To select an on-screen button appearing atthe bottom of the screen, touch the buttonsunderneath them.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 10/720
Make a backup of important recorded data
JVC will not be responsible for any lost data. It is recommended to copy your importantrecorded data to a DVD or other recording media for storage. (Z p. 41)
Make a trial recordingBefore the actual recording of important data, make a trial recording and play back therecorded data to check that the video and sound have been recorded correctly. Werecommend you to use the same recording media when performing both the trial recordingand the actual recording.
Reset the camcorder if it does not operate correctly
Close the LCD monitor and remove the power supply (battery pack or AC adapter) fromthe camcorder, then reattach it.
Precautions on handling batteries
• Be sure to use the JVC BN-VF808U/VF815U/VF823U battery packs. This productincludes patented and other proprietary technology and is made to be used with the JVCbattery and not with other batteries. JVC cannot guarantee safety or performance of thisproduct when it is operated by other batteries.
• If the camcorder is subjected to electrostatic discharge, turn off the power before using itagain.
If a malfunction occurs, stop using the camcorder immediatelyand contact www.jvc.com or by phone at 1-800-252-5722
Recorded data may be erased while the camcorder is being repaired or inspected. Backup all data before requesting repairs or inspections.
Because the camcorder may be used for demonstration in ashop, the demonstration mode is set to [ON] by default
To deactivate the demonstration mode, set [DEMO MODE] to [OFF]. (Z p. 57)
When Using an SD Card
• Operations are confirmed on the following SD cards.Class 4 or higher compatible SD or SDHC card. Panasonic, TOSHIBA, SanDisk, ATP SDcard (256 MB to 2 GB) or SDHC card (4 GB to 32 GB).
• If other media are used, they may fail to record data correctly, or they may lose data thathad already been recorded.
• MultiMediaCards are not supported.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 11/7211
E N GL I S H
GE T T I N G
S T A R T E D
Accessories
AP-V20U
AC Adapter
BN-VF808U
Battery Pack
AV Cable
USB Cable CD-ROM Core Filter (x2)
NOTE
Make sure to use the provided cables for connections. Do not use any other cables.
Attaching the Core Filter
The core filter reduces interference caused when connecting to other devices. Connect the endof the cable with the core filter to the camcorder.
Release the stopper.3 cm (1-3/16")
USB cable: Wind once.AC Adapter: Wind twice.
To be connectedto the camcorder
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 12/722
Index
DC
D C
DC
B A
NOTE
• The LCD monitor can rotate 270°.
• Be careful not to cover4, 5 and 6 during
shooting.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 13/7213
E N GL I S H
GE T T I N G
S T A R T E D
Camcorder
! Touch Sensor (Z p. 9)# OK Button$ MENU Button%
Power Button [ ]& UPLOAD Button (Z p. 53)( PLAY/REC Button (Z p. 20, 21, 24, 25)) Mode Switch [!, #]* DIRECT DVD Button (Z p. 42)
INFO Button (Z p. 22, 23, 35)+ SD Card Slot, EXPORT Button (Z p. 51)- AV Connector (Z p. 31, 50)
. START/STOP Button (Z p. 20)
/ SNAPSHOT Button (Z p. 21)0 Zoom Lever [W 7 , T] (Z p. 22)
Speaker Volume Control [–VOL+] (Z p. 24)1 Speaker2 DC Connector3 USB Connector [ 2 ] (Z p. 41, 46)
4 Lens5 LED Light (Z p. 22)6 Stereo Microphone
7 Grip Strap8 Belt Strap9 Fasten: Stud Hole; Tripod Mounting Socket< Battery Release Button [BATT.] (Z p. 16)
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 14/724
During both Video and Still Image
Recording
4: 55 PMNOV. 1. 20 09
! Selected Recording Mode Indicator
(Z p. 28)@ : Auto Mode3 : Manual Mode
# Effect Mode Indicator (Z p. 30)$ Tele Macro Mode Indicator (Z p. 30)% LED Light Indicator (Z p. 22)& Scene Select Indicator (Z p. 29)( Quick Review Indicator (Z p. 20, 21)) Zoom Indicator (Z p. 22)* SD Card Slot Indicator
: Slot A (Default Setting)B : Slot B
+ White Balance Indicator (Z p. 30), Monitor Backlight Indicator (Z p. 57)- Battery Indicator. Date/Time (Z p. 16)/ Manual Focus Adjustment Indicator
(Z p. 29)0 Backlight Compensation Indicator (Z p. 28)1 Brightness Control Indicator (Brightness Control Indicator (Z p. 29) . : Photometry Area Control Indicator
(Z p. 30)2 Shutter Speed (Z p. 29)
During Video Recording Only
! Mode Indicator# Export Mode Indicator ((Z p. 51)$
Counter% Upload Mode Indicator ((Z p. 53)& Video Quality:B (ULTRA FINE),
C (FINE),D (NORMAL),E (ECONOMY)(Z p. 56)
( Remaining Time) MREC: (Appears during recording.)
MQ: (Appears during record-standbymode.)
* Digital Image Stabilizer (DIS) Indicator(Appears when [DIS] is set to [OFF].)
(Z p. 56)+ Auto Switch Rec Media (Z p. 56), Wind Cut Indicator (Z p. 56)- Shooting Indicator (Shooting Indicator (Z p. 20). Event Indicator (Z p. 23)
During Still Image Recording Only
! Mode Indicator# Focus Indicator (Z p. 21)$ Image Quality: FINE (fine) or STD
(standard) (Z p. 56)% Remaining Number of Shots
& Shooting Indicator (Z p. 21)( Shutter Mode Indicator (Z p. 55)) Self-Timer Indicator (Z p. 55))
Indications on LCD Monitor
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 15/7215
E N GL I S H
GE T T I N G
S T A R T E D
During Video Playback
8
4:55 PMNOV. 1. 20 09
! Mode Indicator# Playlist Playback Indicator (Appears when
playing back a playlist.) (Z p. 39)$ Video Quality:B (ULTRA FINE),
C (FINE),D (NORMAL),E (ECONOMY)(Z p. 56)
% Counter& Playback Mode F: Playback Q: Pause K: Forward Search J: Reverse Search G: Forward Slow-Motion
E: Reverse Slow-Motion (The number on the left shows speed.)( Battery Indicator) Date/Time (Z p. 16)* Volume Level Indicator
During Still Image Playback
4:55 PMNOV. 1. 20 09
! Mode Indicator# Folder/File Number$
Slide Show Playback Indicator% Battery Indicator& Date/Time (Z p. 16)
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 16/726
Charging the Battery Pack
1 Close the LCD monitor to turn off thecamcorder.
2 Attach the battery pack, then connectbattery pack, then connectthe AC adapter.
• With the “” (arrow) on the battery packpointing at the correct direction, slide thebattery pack until it locks in place.
• The power/charge lamp blinks to indicatecharging has started.
• When the lamp goes out, charging isfinished.
L To check the remaining battery powerSee page 22.
L Required charging/recording time(approx.)*When the LED light is off and the monitorbacklight is set to [STANDARD] mode.
Battery pack Charging time Recording time
BN-VF808U
(Provided)
1 hr. 50 min. 2 hr. 45 min.*
BN-VF815U 2 hr. 40 min. 5 hr. 25 min.*
BN-VF823U 3 hr. 40 min. 8 hr. 10 min.*
L To detach the battery pack
NOTE
• You can also use the camcorder with justthe AC adapter.
• The actual recording time may shortendepending on the recording environment,such as when recording scenes with fastmoving.
• Please do not pull or bend the AC adapterplug and cable. This may damage the AC
adapter.
Necessary Settings before Use
AC AdapterTo AC Outlet(110V to 240V)
Date/Time Setting
1 Open the LCD monitor to turn on thecamcorder.
2 Touch MENU.
3 Select [DISPLAY SETTINGS].
VIDEO
SELECT ASPECT RATIO
WIND CUT
DISPLAY SETTINGS
SET QUIT
CONFIGURE ON-SCREEN DISPLAY
AUTO SWITCH REC MEDIA
4 Select [CLOCK ADJUST].
DISPLAY SETTINGS
9
:;
B
LANGUAGE
DATE DISPLAY STYLE
CLOCK ADJUST
SET QUIT
SET DATE AND TIME
MONITOR BRIGHT
Arrow
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 17/7217
E N GL I S H
GE T T I N G
S T A R T E D
Language Setting
The language on the display can be changed.
1 Open the LCD monitor to turn on thecamcorder.
2 Touch MENU.
3Select [DISPLAY SETTINGS].
VIDEO
SELECT ASPECT RATIO
WIND CUT
DISPLAY SETTINGS
SET QUIT
CONFIGURE ON-SCREEN DISPLAY
AUTO SWITCH REC MEDIA
4 Select [LANGUAGE].DISPLAY SETTINGS
9
:;
B
LANGUAGE
DATE DISPLAY STYLE
CLOCK ADJUST
SET QUIT
ON-SCREEN DISPLAY LANGUAGE
MONITOR BRIGHT
5 Select the desired language.
L To return to the previous screenSelect@.
L To quit the screenSelect [QUIT].
5 Select [CLOCK SETTING].
CLOCK ADJUST
AREA SETTING
CLOCK SETTING
SET QUIT
SET THE CITY, DATE AND TIME
SET FOR DAYLIGHT SAVING TIME
6 Select the city closest to the areawhere you use the camcorder.
AREA SETTING
SET QUIT
GMT : NOV. 1.2009 04:55PM
7 Select [ON] if daylight saving time iseffective.
SET QUIT
SET DAYLIGHT SAVING TIME
NOV. 1.2009 04:55 PM
SET FOR DAYLIGHT SAVING TIME
DAYLIGHT SAVING TIME (DST)
OFF
8 Set the date and time.
Select the item by using the touch sensorand select () to set.
SAVE QUIT
CLOCK SETTING
GMT- 5:00
DATE TIME
PM04 551 2009NOV
9 Select [SAVE].
To reset the setting, select [QUIT].
Setting the clock to local time whentraveling
After performing steps 1-4 (Z p. 16)
5 Select [AREA SETTING].
CLOCK ADJUST
AREA SETTING
CLOCK SETTING
SET QUIT
SET WHEN IN ANOTHER COUNTRY
SET FOR DAYLIGHT SAVING TIME
6 Select the city closest to the area you
are traveling.
AREA SETTING
SET QUIT
GMT : NOV. 1.2009 04:55PM
L To return to the previous screenSelect@.
L To quit the screenSelect [QUIT].
Selected area is highlighted
Principal city of the
selected area
Time difference to
GMT
[ON]: Clock is advanced1 hour from the normaltime which you set.
[OFF]: Deactivates thefunction.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 18/728
Other Settings
Grip Adjustment
Adjust the strap and fasten.
NOTE
• Do not pull the strap when you open thefasten. Please pull the tab to open it.
• Fasten the strap when you grip thecamcorder.
• When carrying the camcorder, please becareful not to drop it.
Grip Strap
Fasten
Tab
Tripod Mounting
Align the camcorder stud hole with the tripodstud, and the mounting socket with the screw,and then rotate the camcorder clockwise to
mount it to the tripod.
NOTE
Do not use a tripod on unsteady or unlevelsurfaces. It could tip over, causing seriousdamage to the camcorder.
Bottom of the
camcorder
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 19/72
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 20/720
Recording Files
Video Recording
Preparation:
• Open the LCD monitor to turn on the camcorder.
• Insert an SD card.
Press PLAY/REC to selectrecording mode.
PLAY/REC
Press START/STOP to startrecording.
0 : 00 : 01 REC
B
L To stop recordingPress the START/STOP button again.
L To view the video you just recordedSelectA during pause.During the preview, you can delete thevideo by selecting*.
L To change the video qualityChange the settings in [VIDEO QUALITY].(Z p. 56)
L To register a file to an eventSee page 23.
L To change the aspect ratio of the image(16:9/4:3)Change the settings in [SELECT ASPECTRATIO]. (Z p. 56)
L To record a still image during videorecording
Press SNAPSHOT.
Slide the mode switch to select! (video) mode.
NOTE
• The video recording mode is automatically selected when you turn the camcorder’s power off andthen on again.
• If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically toconserve power. To turn the camcorder on again when using the battery pack, close the LCD monitorand open it again. When using the AC adapter, perform any operation such as zooming.
• After recording video for 12 consecutive hours, recording stops automatically. To ensure continuous
recording, set [AUTO SWITCH REC MEDIA] to [ON] before you start recording. (Z p. 56)
• A new file will be created for every 4 GB of continuous shooting.
• This camcorder records video in MPEG2 format compliant with SD-VIDEO format. This camcorder isnot compatible with other digital video formats.
0 : 00 : 00
B
Approximate remainingtime for recording
You can also start/stop recording byselecting [REC] on the LCD monitor.(On-screen recording control)
SNAPSHOT
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 21/7221
E N GL I S H
R E C OR D I N G /
P L A Y B A C K
Still Image Recording
Preparation:
• Open the LCD monitor to turn on the camcorder.
• Insert an SD card.
Slide the mode switch to select# (still image) mode.
Press PLAY/REC to select therecording mode.
PLAY/REC
Press and hold SNAPSHOThalfway.
The ? indicator becomes green whenthe captured image is focused.
Press SNAPSHOT fully to take astill image.
FINE
NOTE
• DIS (Digital Image Stabilizer) does not function during still image recording.
• If the camcorder is not operated for 5 minutes while the power is on, it turns itself off automatically toconserve power. To turn on the camcorder again when using the battery pack, close the LCD monitorand open it again. When using the AC adapter, perform any operation such as zooming.
L To view the last recorded imageSelectA after shooting.Selecting* during playback deletesthat image.
L To change the image qualityChange the settings in [IMAGEQUALITY]. (Z p. 56)
L To record still images continuouslySet to [CONTINUOUS SHOOTING] in[SHUTTER MODE]. (Z p. 55)
[9999]FINE
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 22/722
Zooming
Preparation:
• Select ! or # mode.
• Select the recording mode.
Zoom out Zoom in
W: Wide angle T: Telephoto
You can also zoom out/zoom in by selecting[W] or [T] on the LCD monitor. (On-screenzoom control)
Maximum zoom ratio (factory-preset).
! mode # mode
[80X/DIGITAL] [35X/OPTICAL]
L To change the maximum zoom ratio(! mode only)Change the settings in [ZOOM]. (Z p. 56)
NOTE
Macro shooting is possible as close asapprox. 5 cm (2") to the subject when thezoom lever is set all the way to W.
LED Light
Preparation:
• Select ! or # mode.
• Select the recording mode.
1 Touch MENU.
2 Select [LIGHT].
3 Select the desired setting.
ONThe LED light remains onregardless of the surroundingconditions.
AUTOThe LED light turns onautomatically when shooting ininsufficient light conditions.
OFF Deactivates this function.
Checking the Remaining Battery
Power
Preparation:
• Attach the battery pack.
• Select the recording mode.
! mode:Press INFO three times or INFO and thenselect ;.# mode:Press INFO.
INFO
DIRECT
DVD
BATTERY CONDITION
MAX TIME
min
100%
50%
0%QUIT
L To quit the screen Select [QUIT] or press INFO.
NOTE
The recordable time display should only beused as a guide. It is displayed in 10 minuteunits.
Recording Files (Continued)
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 23/7223
E N GL I S H
R E C OR D I N G /
P L A Y B A C K
Registering Files to Events
If you select an event to register the file toevent to register the file tobefore starting recording, you can find the fileeasily at playback.
Preparation:• Select ! mode.
• Select the recording mode.
1 Touch MENU.
2 Select [REGISTER EVENT].
VIDEO
LIGHT
VIDEO QUALITY
REGISTER EVENT
SET QUIT
FOR EASY SEARCHING ARRANGE
ZOOM
n
@ @
D
B
1
3 Select the event.
SET QUIT
REGISTER EVENT
VACATION 1
• The selected event is displayed on thescreen.
L To quit the screenSelect [QUIT].
L To cancel the event registrationSelect [CANCEL] in step 3.
L To search by event
See page 27.
NOTE
Once you select a certain event to register afile, the setting will remain even if you turn offthe camcorder.
Checking the Remaining Space on
the Recording Media
Preparation:
• Select ! mode.
• Select the recording mode.Press the INFO button once (Slot A) ortwice (Slot B).
INFO
DIRECT
DVD
MAX RECORDING TIME
SLOT A
FREE
14h27m
21h25m
B
C
D
E
28h27m
75h12m
USED
SET QUIT
The maximum recording time is displayed for
each video quality mode.
L To change the video quality1) Select the video quality.2) Select [SET].
L To change the recording media1) Press INFO to select SLOT A or SLOT B.2) Select [SET].
L To quit the screen
Select [QUIT].
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 24/724
Playing Back Files
Video Playback
Preparation:
• Open the LCD monitor to turn on the camcorder.
• Insert an SD card.
Press PLAY/REC to select theplayback mode.
PLAY/REC
, DIGEST
VIDEO PLAYBACK
NOV. 01. 2009 04:55PM
1/2
The index screen appears.
Select the desired file.
L To move to the previous or next pageTouch [] or [] for over a second.
L To play back a few seconds from eachselect scene of the recorded videosTouch [DIGEST].
L To delete a videoSelect* when playback is stopped.
L To change the number of thumbnails(6 thumbnails/20 thumbnails)Move the zoom lever to [W] or [T].
Slide the mode switch to select! (video) mode.
L Operations during Video Playback On-screen buttons
N : Return to the first scene of the fileO : Go to the first scene of the next fileL : Return to the index screenJ : Reverse search (during playback)E : Frame-by-frame playback in reverse
direction (during pause)*F : PlaybackQ : PauseK : Forward search (during playback) G
: Frame-by-frame playback in forwarddirection (during pause)*
* Slow playback starts when you keep touchingthe sensor button under E / G for a while.
LSpeaker volume
− : Turn down thevolume
+ : Turn up thevolume
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 25/7225
E N GL I S H
R E C OR D I N G /
P L A Y B A C K
Still Image Playback
Preparation:
• Open the LCD monitor to turn on the camcorder.
• Insert an SD card.
Press PLAY/REC to select theplayback mode.
PLAY/REC
The index screen appears.
Select the desired file.
Slide the mode switch to select# (still image) mode.
,
IMAGE PLAYBACK
NOV. 01. 2009 04:55PM
1/2
L Operations during Still Image Playback On-screen buttons
P : Change playback order of slide show in reverse directionF : Change playback order of slide show in forward directionL : Return to the index screenN : Display the previous fileF : Start the slide showQ : End the slide showO : Display the next file
L To move to the previous or next pageTouch [] or [] for over a second.
L To delete a still imageSelect*.
L To change the number of thumbnails(6 thumbnails/20 thumbnails)Move the zoom lever to [W] or [T].
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 26/726
File Search Function
Preparation:
• Select ! or # mode.
• Select the playback mode.
Group Index Screen !
You can search the desired file by the group.The group is created automatically based onrecording date and time. And the contents ofthe group are changed when adding/deletingor editing scenes.
1 Select .
2 Select [GROUP].
SET
VIDEO PLAYBACK
NOV. 01. 2009 04:55PM
1/2
GROUP
SEARCH DATE
SEARCH EVENT
3 Select the file you want to play back.
DIGEST QUIT
VIDEO (GROUP)
NOV. 01. 2009 04:55PM
1/2
1
4
3
2
1
2
The number of files in the group isdisplayed in the thumbnails.
L To return to the index screen
[email protected] To quit the screen
Select [QUIT].
NOTE
• The contents of the group may be changeddepending on the interval of the recordingtime. To change the contents, register theevent. (Z p. 23)
• The created groups may not be listed by
recording date such as when copying thefiles to an SD card.
Date Index Screen
You can search the desired file by therecording date.
1 Select .
In case of # mode, go to step 3.
2 Select [SEARCH DATE].
SET
VIDEO PLAYBACK
NOV. 01. 2009 04:55PM
1/2
GROUP
SEARCH DATE
SEARCH EVENT
3 Select the recording date.
QUIT
SEARCH DATE
NOV.05.2009
NOV.01.2009
SET
NOV.20.2009
NOV.27.2009
DEC.28.2009
4 Select the file you want to play back.
DIGEST QUIT
NOV.01.2009
NOV. 01. 2009 04:56PM
1/2
L To return to the index screenSelect@.
L To quit the screen
Select [QUIT].
Playing Back Files (Continued)
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 27/7227
E N GL I S H
R E C OR D I N G /
P L A Y B A C K
To Play Back MPG Files
An MOD file is created in the EXTMOV folderwhen management infomation is corrupted.Follow the procedure below to play back the
MPG files in the EXTMOV folder.Preparation:
• Select ! mode.
• Select the playback mode.
1 Touch MENU.
2 Select [PLAYBACK MPG FILE].
VIDEO
PLAYBACK PLAYLISTEDIT PLAYLIST
PLAYBACK MPG FILE
SET QUIT
PLAY DAMAGED FILES
DUBBING PLAYBACK
v
3 Select the file you want to play back.
[MPG] 1/2
L To return to the normal file playbackmodeSelect@.
NOTE
Depending on the condition of the damagedfile, playback might fail or may not run smoothly.
Event Screen !
You can search the desired file by the eventthat you registered the file to when recording.(Z p. 23) After searching by the event, youcan search by the recording date to narrow
down the search.
1 Select .
2 Select [SEARCH EVENT].
SET
VIDEO PLAYBACK
NOV. 01. 2009 04:55PM
1/2
GROUP
SEARCH DATE
SEARCH EVENT
3 Select the event.
SET QUIT
SEARCH EVENT
VACATION 1
4 Select the recording date.To display all the files, select [ALLSCENES].
QUIT
SEARCH EVENT
ALL SCENES
NOV.01.2009
SET
NOV.05.2009
NOV.20.2009
NOV.27.2009
5 Select the file you want to play back.
DIGEST QUIT
NOV. 01.2009 1/1
NOV. 01.2009 04:55PM
L To return to the index screenSelect@.
L To quit the screenSelect [QUIT].
L To change the event registration of afileSee page 36.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 28/728
Manual recording mode enables you to setthe focus and screen brightness etc. manually.
Changing to Manual Recording Mode
Preparation:
• Select ! or # mode.
• Select the recording mode.
Select [A/M] twice.
[4 h 59 m]B
L To return to the auto recording modeSelect [A/M] so that the 4 indicatorappears.
Backlight Compensation
Backlight compensation brightens the subjectby increasing the exposure.
In the manual recording mode:
Select -.
REC
L To cancel backlight compensationSelect - again.
NOTE
If the LCD monitor is turned upside down, - is not displayed. Change the setting when theLCD monitor is in the normal position.
Manual Setting in Menu
In the manual recording mode:
1 Touch MENU.
2 Select [MANUAL SETTING].
VIDEO
LIGHT
VIDEO QUALITY
REGISTER EVENT
SET QUIT
USE DETAIL SETTINGS BASED
M MANUAL SETTING
n
D
B
¤
1
3 Select the desired menu.
VIDEO
SCENE SELECT
SHUTTER SPEED
FOCUS
SET QUIT
THE BRIGHTNESS OF THE
ADJUST BRIGHTNESS
9 @
@
@
1
4 Select the desired setting.
SCENE SELECT
SHUTTER SPEED
FOCUS
ADJUST BRIGHTNESS
9 @
@@
1CENE SELEC
SHUTTER SPEED
FOCUS
9
@
VIDEO
SET QUIT
MANUAL@
AUTO
Depending on the kind of settings youselect, you can set the value by using thetouch sensor.
L To return to the previous screenSelect@.
L To quit the screenSelect [QUIT].
Manual Recording
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 29/7229
E N GL I S H
R E C OR D I N G /
P L A Y B A C K
Menus Settings: [ ] = Factory-preset
SCENE SELECTAdjusts the exposure andshutter speed to suit yoursurroundings or the subject.
1 [OFF]: Deactivates the function.5 NIGHT: Records with more sensitivity in dim locations by
adjusting the shutter speed automatically. TWILIGHT: Makes evening scenes look more natural.
6 PORTRAIT : The subject in the foreground is accentuated byblurring the background.
H SPORTS: Records fast moving subjects clearly.G SNOW: Compensates for subjects that may appear too dark
when shooting in extremely bright surroundings, such asin snow.
/ SPOTLIGHT: Select this when a spotlight makes a subjectappear too bright.
FOCUSAdjusts the focus.
[AUTO]: The focus is adjusted automatically.
3 MANUAL:@ A : Adjusts the focus manually. (When zooming, thesubject will not go out of focus if you adjust the focus at thetelephoto (T) side before zooming to the wide-angle (W)side.)
g ADJUST BRIGHTNESS
Adjusts the brightness.
! mode [AUTO][AUTO]: The brightness is adjusted automatically.
3 MANUAL:–6 to +6: Corrects the brightness within this range in increments
of 1.
# mode [AUTO][AUTO]: The brightness is adjusted automatically.
3 MANUAL:–2.0 to +2.0 (EV): Corrects the brightness within this range in
increments of 1/3EV.
9 SHUTTER SPEEDA fast shutter speed canfreeze the motion of afast-moving subject, anda slow shutter speed canblur the subject to give theimpression of motion.
! mode
@ [AUTO]: The shutter speed is adjusted automatically.
3 MANUAL:
1/2 to 1/4000: The smaller the value, the faster the shutter
speed.# mode
@ [AUTO]: The shutter speed is adjusted automatically.
3 MANUAL:
1/2 to 1/500: The smaller the value, the faster the shutterspeed.
NOTE
It is recommended to use the tripod when recording with a slowshutter speed.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 30/720
Menus Settings: [ ] = Factory-preset
WB WBAdjusts the white balance toachieve the optimum colorsfor the amount of light in yoursurroundings during recording.
@ [AUTO]: White balance is adjusted automatically.
3 MANUAL:B MWB: Adjusts the white balance manually depending on
the light source.
1) Hold a sheet of plain white paper infront of the camcorder so that thewhite paper fills the screen.
2) Keep touching OK until the B indicator appears.
D FINE: When shooting outdoors on a sunny day.E CLOUD: When shooting outdoors on a cloudy day.F HALOGEN: When a video light or similar type of lighting is
used.
PHOTOMETRY AREAEnables you to adjust thebrightness in the desired spotwhen backlight compensationdoes not work well.
6 [WHOLE SCREEN]: Brightness is adjusted automaticallyfor whole screen.
7 SPOT: Brightness for the specified spot is adjustedautomatically.
w EFFECTEnables you to record videos
or still images with specialeffects.
1 [OFF]: No effect is used.J SEPIA: The image has a brownish tint like old still images.K MONOTONE: The image becomes black and white like old
movies.L CLASSIC FILM*: This effect skips frames to give images of
an old movie atmosphere.M STROBE*: The image looks like a series of consecutive
snapshots.* ! mode only.
t TELE MACROEnables you to shoot asubject as large as possibleat a distance of approx. 50 cmcm
(1.64 ft)..
1 [OFF]: Deactivates the function.
0 ON: Activates the function.
NOTE
Set [TELE MACRO] to [OFF] if you will not take close-up still
images.Non-close-up still images will be blurred if [TELE MACRO] is
set to [ON].
Manual Recording (Continued)
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 31/7231
E N GL I S H
U S I N G
WI T H T V
Viewing Files on TV
This camcorder is designed to be usedwith NTSC-type color television signals. Itcannot be used with a television of a differentstandard.
Connection with TV
You can output videos from the AV connector.
L To connect using the AV connector.
Preparation:
• Turn off all units.
Playback Operation
After the connection with TV is completed
1 Turn on the camcorder and the TV.
2 Set the TV to its VIDEO mode.
3 (Only when connecting the camcorder tothe VCR/DVD recorder)
Turn on the VCR/DVD recorder, andset the VCR/DVD recorder to its AUXinput mode.
4 Start playback on the camcorder.(Z p. 24, 25)
L To display the camcorder’s on-screendisplay on TVSet [DISPLAY ON TV] to [ON]. (Z p. 58)
ACAdapter
DCConnector
AVConnector
AV Input Connector
AV Cable
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 32/72
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 33/7233
E N GL I S H
E D I T I N G
Deleting All Files
After performing steps 1-2 (Z p. 32)
3 Select [DELETE ALL].
VIDEO DELETE
FILE SELECT
CURRENT
SET QUIT
DELETE ALL SCENES
DELETE ALL
4 Select [YES].
SET
YES
NO
DELETE ALL?
(EXCEPT PROTECTED SCENE)
VIDEO DELETE
L To quit the screenSelect [QUIT].
Deleting Selected Files
After performing steps 1-2 (Z p. 32)
3 Select [FILE SELECT].
VIDEO DELETE
FILE SELECT
CURRENT
SET QUIT
SELECT AND DELETE SCENE
DELETE ALL
4 Select the desired file and select *.
CHECK EXEC.
VIDEO DELETE
QUIT
1/2
• The* mark appears on the file. Toselect other files, repeat this step.
• To check the content of the file, select[CHECK].
5 Select [EXEC].
6 Select [YES].
SET QUIT
YES
NO
DELETE SELECTED SCENES?
VIDEO DELETE
L To quit the screenSelect [QUIT].
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 34/724
Protecting Files
Preparation:
• Select ! or # mode.
• Select the playback mode.
1 Touch MENU.
2 Select [EDIT].
VIDEO
EDIT PLAYLIST
PLAYBACK MPG FILE
EDIT
SET QUIT
CAN BE SET TO PREVENT COPY
DUBBING PLAYBACK
3 Select [PROTECT/CANCEL].
EDIT PLAYLIST
PLAYBACK MPG FILE
EDIT
DUBBING PLAYBACK
EDIT PLAYLI T
PLAYBA K MP FIL
DUBBING PLAYBACK
VIDEO
SET QUIT
SCENE SELECT
FOCUS
ADJUST BRIGHTNESS
TRIMMING
MOVE
COPY
PROTECT/CANCEL
PROTECT VIDEO FROM DELETION
x
Protecting the Currently Displayed File
After performing steps 1-3
4 Select [CURRENT].
PROTECT/CANCEL
FILE SELECT
CURRENT
SET QUIT
PROTECT EACH SCENE
PROTECT ALL
CANCEL ALL
5 Select [YES].
SET QUIT�
YES
NO
�
PROTECT?
You can select the previous or next file byselecting{ or}.
L To quit the screenSelect [QUIT].
Protecting Selected Files
After performing steps 1-3
4 Select [FILE SELECT].
PROTECT/CANCEL
FILE SELECT
CURRENT
SET QUIT
SELECT AND PROTECT SCENE
PROTECT ALL
CANCEL ALL
5 Select the desired file and select x.
CHECK
VIDEO PROTECT
QUIT
1/2
• The x (protection) mark appears on thefile. To select other files, repeat this step.
• To check the content of the file, select[CHECK].
6 Select [QUIT].
7 Select [YES].
SET
YES
NO
QUIT PROTECT?
VIDEO PROTECT
L To release protectionSelect the protected file in step 5.
Managing Files (Continued)
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 35/7235
E N GL I S H
E D I T I N G
Viewing File InformationFile Information
Preparation:! mode: Pause the playback. Otherwise, select the file
on the index screen.# mode: Play back the still image. Otherwise, selectthe file on the index screen.
Press INFO.
INFO
DIRECT
DVD
VIDEO PLAYBACK
FILE : MOV019.MOD
FOLDER : PRG001
DATE/TIME : NOV. 01.2009 04:55PM
PB TIME : 0:10: 15
QUALITY : ULTRA FINE
PROTECT : OFF
2/2
i
• FILE: File name
• FOLDER: Folder name
• DATE/TIME: Date and time of the recording
• PB TIME (! mode): Playback time (length of the file)
• SIZE (# mode):
Image size• QUALITY: Video quality/Image quality (Z p. 56)
• PROTECT: File protection status (Z p. 34)
L To turn off the file information displayPress INFO again.
Protecting All Files
After performing steps 1-3 (Z p. 34)
4 Select [PROTECT ALL].
PROTECT/CANCEL
FILE SELECT
CANCEL ALL
CURRENT
SET QUIT
PROTECT ALL SCENES
PROTECT ALL
5 Select [YES].
SET
YES
NO
PROTECT ALL?
VIDEO PROTECT
L To quit the screenSelect [QUIT].
L To release protection of all files1) In step 4, select [CANCEL ALL].2) Select [YES].
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 36/726
6 Select a new event.To cancel the event registration, select[CANCEL].
SET QUITCANCEL
CHANGE EVENT REG.
SPORTS 1
Changing the Event of the SelectedFiles
After performing steps 1-3
4 Select [SET RANGE AND CHANGE].
CHANGE EVENT REG.
SET RANGE AND CHANGE
CURRENT
SET QUIT
SELECT MULTIPLE SCENES
5 Select the first file of the range.
SET CHECK
CHANGED(FROM HERE)
QUIT
1/2
To preview scenes, select the file andselect [CHECK].
6 Select the last file of the range.
7 Select a new event.To cancel the event registration, select[CANCEL].
SET QUITCANCEL
CHANGE EVENT REG.
SPORTS 1
L To quit the screenSelect [QUIT].
Changing the Event Registration
Preparation:
• Select ! mode.
• Select the playback mode.
1 Touch MENU.
2 Select [EDIT].
VIDEO
EDIT PLAYLIST
PLAYBACK MPG FILE
EDIT
SET QUIT
CAN BE SET TO PREVENT COPY
DUBBING PLAYBACK
3 Select [CHANGE EVENT REG.].
EDIT PLAYLIST
PLAYBACK MPG FILE
EDIT
DUBBING PLAYBACK
EDIT PLAYLIST
PLAYBA K MP FIL
DUBBIN PLAYBA
VIDEO
SET QUIT
SCENE SELECT
FOCUS
ADJUST BRIGHTNESS
MOVE
PROTECT/CANCEL
CAN SET OR CHANGE THE EVENT
x
TRIMMING
CHANGE EVENT REG.
Changing the Event of the CurrentlyDisplayed File
After performing steps 1-3
4 Select [CURRENT].
CHANGE EVENT REG.
SET RANGE AND CHANGE
CURRENT
SET QUIT
SELECT SCENES ONE BY ONE
5 Select the file you want to register.
SET QUIT�
YES
NO
�
CHANGE EVENT?
You can select the previous or next file byselecting{ or}.
Managing Files (Continued)
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 37/7237
E N GL I S H
E D I T I N G
Trimming Files
You can select the necessary part of thevideo and save it as a new video file.
Preparation:• Select ! mode.
• Select the playback mode.
1 Touch MENU.
2 Select [EDIT].
VIDEO
EDIT PLAYLIST
PLAYBACK MPG FILE
EDIT
SET QUIT
CAN BE SET TO PREVENT COPY
DUBBING PLAYBACK
3 Select [TRIMMING].
EDIT PLAYLIST
PLAYBACK MPG FILE
EDIT
DUBBING PLAYBACK
EDIT PLAYLI T
PLAYBA K MP FIL
DUBBING PLAYBACK
VIDEO
SET QUIT
SCENE SELECT
FOCUS
ADJUST BRIGHTNESS
MOVE
COPY
PROTECT/CANCEL
TO CAPTURE A PARTICULAR
x
TRIMMING
4 Select the desired file.
SET
TRIMMING
QUIT
1/2
5 Select [SET] at the start point.
It is recommended to select [SET] afterthe pause button is pressed.
QUITQ KJ
J
SET
TRIM (FROM HERE)
E
0 : 12 : 05
S
6 Select [SET] at the end point.
It is recommended to select [SET] afterthe pause button is pressed.
QUITQ KJ
J
SET
CANCEL
TRIM (UNTIL HERE)
E
0 : 08 : 050 : 12 : 05
S
To cancel the start point setting, select[CANCEL].
7 Select [CAPTURE TRIMMED FILE].
QUITSET
SET
E
0 : 08 : 050 : 12 : 05
S
CAPTURE TRIMMED FILEREDEFINE AREA
To set the start/end point again, select[REDEFINE AREA].
8 Select [YES].
When copying is finished, the copied file isadded to the index screen.
9 Touch OK.
L To quit the screenSelect [QUIT].
Use these controls tolocate the start point.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 38/728
It is a list that enables you to organizerecorded videos in order of preference.
Preparation:
• Select ! mode.
• Select the playback mode.
Creating PlaylistsPlaylists
1 Touch MENU.
2 Select [EDIT PLAYLIST].
VIDEO
UPLOAD SETTINGS
SEARCH
EDIT PLAYIST
SET QUIT
TO CREATE PLAYLIST ORDER
PLAYBACK PLAYLISTv
3 Select [NEW LIST].
EDIT PLAYLIST
EDIT
NEW LIST
SET QUIT
CREATE NEW ORIGINAL VIDEO
DELETE
4 Select an item and display files.
NEW LIST
CREATE BY DATE
CREATE FROM SCENE
SET QUIT
SELECT AND CREATE SCENE
CREATE BY GROUP
CREATE BY EVENT
• [CREATE FROM SCENE]:
Display all files individually.• [CREATE BY DATE]:
Display all the files listed by recordingdate.
• [CREATE BY GROUP]:Display all files listed by group.
• [CREATE BY EVENT]:Search for an event and display thecorresponding files listed by recordingdate.
5 Select the file to add to playlist.
FROM SCENENOV.01.2009
TOTAL
00h10m
QUITCHECKSELECT
To preview scenes, select the file andselect [CHECK].
6 Select the insertion point.
FROM SCENENOV.01.2009
TOTAL
00h10m
DVD1
QUITCHECKSAVESELECT
• To add other files, repeat steps 5 and 6.
• To delete a registered scene, select theregistered file, then select [CANCEL].
7 Select [SAVE].
8 Select [SAVE AND QUIT].
SET
SAVE AND QUIT
RETURN
DELETE AND QUIT
QUIT PLAYLIST.SAVE EDITED CONTENTS?
L To quit the screenSelect [QUIT].
NOTE
• A maximum of 99 playlists can be created.• If you delete the original files, thecorresponding files are also deleted fromthe playlist.
Playlists
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 39/7239
E N GL I S H
E D I T I N G
Playing Back Playlists
1 Touch MENU.
2 Select [PLAYBACK PLAYLIST].VIDEO
UPLOAD SETTINGS
SEARCH
DELETE
SET QUIT
PLAY BACK ORIGINAL VIDEO IN
PLAYBACK PLAYLISTv
$
3 Select the playlist.
PLAYBACK PLAYLIST
02 NOV.05.2009 07:55PM
01 NOV.01.2009 04:55PM
CHECK QUIT
03 NOV.05.2009 10:40AM
04 NOV.20.2009 02:03PM
05 DEC.28.2009 11:15AM
L To stop playback SelectL.
L To quit the screenSelect [QUIT].
L To play back from the desired scene1) In step 3, select [CHECK]. (The index
screen for playlist appears.)2) Select the desired scene.
Other Operations of Playlists
You can perform additional editing and deletefiles in a created playlist.
Adding/Deleting Files in Playlist
After performing steps 1-2 (Z p. 38)
3 Select [EDIT].
4 Select the playlist you want to edit.
To add or delete files, follow the steps 5 to8. (Z p. 38)
Deleting Playlist
Original files are not deleted even if you deletethe playlist.
After performing steps 1-2 (Z p. 38)
3 Select [DELETE].
4 Select a playlist you want to delete.To delete all playlists at once, select[DELETE ALL].
5 When [DELETE PLAYLIST?] appears,select [YES].
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 40/720
Copying Files
Types of Copying and Connectable Device
DVD Burner(CU-VD50/CU-VD3)You can copy video filesrecorded on this camcorderonto DVD discs. (Z right
column)
VCR/DVD RecorderYou can dub video filesrecorded on this camcorderonto DVD discs. (Z p. 50)
PCYou can copy video/ still image files on thiscamcorder onto your PC.(Z p. 45 to 47)
NOTE
It is recommended to use the JVC DVDburner (CU-VD50/CU-VD3). When using
CU-VD20 or CU-VD40, the recording timemay take approx. 2 times longer than the timethat is described in the instruction manual ofDVD burner.
Copying/Moving Files
You can copy or move files between the Slot Aand Slot B of the SD cards.
Preparation:
• Select ! or # mode.
• Select the playback mode.
• Make sure that SD card is inserted in theSD slot.
• Make sure that enough free space is left inthe copy/move destination medium.
1 Touch MENU.
2 Select [EDIT].
VIDEO
EDIT PLAYLIST
PLAYBACK MPG FILE
EDIT
SET QUIT
CAN BE SET TO PREVENT COPY
DUBBING PLAYBACK
3 Select [COPY] or [MOVE].
EDIT PLAYLIST
PLAYBACK MPG FILE
EDIT
DUBBING PLAYBACK
EDIT PLAYLI T
PLAYBA K MP FIL
DUBBING PLAYBACK
VIDEO
SET QUIT
SCENE SELECT
FOCUS
ADJUST BRIGHTNESS
TRIMMING
MOVE
PROTECT/CANCEL
COPY FILES BETWEEN
x
COPY
• [COPY]:Files are copied to the destinationmedium while leaving original files in thesource medium.
• [MOVE]:Files are moved to the destinationmedium while deleting original files in thesource medium.
! mode
# mode
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 41/7241
E N GL I S H
C OP Y I N G
Using a DVD Burner
Supported discs: 12cm DVD-R, DVD-RW
• Regarding DVD-R discs, only unused DVD-R
discs can be used. Regarding DVD-RWdiscs, used DVD-RW discs can also beused, but they need to be formatted beforerecording. Formatting a disc deletes allcontent recorded on the disc up until thattime.
• Dual-layer discs cannot be used.
Regarding finalization after copying
The disc is automatically finalized so that
it can be played on other devices. Afterfinalizing, the disc is a play-only disc, so nomore files can be added.
Connection with a DVD Burner
Preparation:Turn on the camcorder first, then turn on theDVD burner.
NOTE
Refer also to the optional DVD burner’sinstruction manual.
*Use the USB cable that came with the DVDburner.
DC
Connector
USBConnector
AC Adapter
To AC Outlet
*USB Cable
USB Jack
DVD Burner
4 Select the direction.[SLOT A SLOT B] or [SLOT B SLOT A]
SET QUIT
COPY VIDEO
SELECT COPY DIRECTION
SLOT B SLOT A
SLOT A SLOT B
5 Select the desired menu.
SET QUIT
SELECT AND COPY
COPY ALL
SELECT THE OBJECT
TO BE COPIED
COPY VIDEO
• [COPY ALL]/[MOVE ALL]: Select this to transfer all files in therecording medium.When the size of all files in the SLOT A islarger than the free space of the SLOT B,only the files that can be containedin the free space will be copied.
• [SELECT AND COPY]/[SELECT AND
MOVE]: Select when you want to transfer theselected files.
1) Select the desired file, and touch OK.The s mark appears on the file. Toselect other files, repeat this step.
2) Select [EXEC].
6 Select [YES].
SET QUIT
NO
YES
COPY QUANTITY:0009
START COPY?
COPY VIDEO
File transfer starts. When [COPYINGCOMPLETED] / [MOVING COMPLETED]appears, touch OK.
L To quit the screen
1) Select [QUIT].
L To stop the file transfer1) Select [STOP].2) When [QUIT?] appears, select [YES].
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 42/722
Copying Files (Continued)
Backup All Files
Preparation:
• Connect the camcorder to the DVD burner.
• Select ! mode.
1 Select [CREATE FROM ALL].
CREATE DVD
SELECT AND CREATE
CREATE DUPLICATE
CREATE FROM ALL
SET
COPY RECORDED VIDEOS
PLAYBACK
2 Select the desired menu.
CREATE FROM ALL
UNSAVED SCENES
ALL SCENES
SET
COPY ALL VIDEOS TO DVD
• [ALL SCENES]: All files in the recording medium arecopied.
• [UNSAVED SCENES]:
Files that have never been copied to aDVD disc are automatically selected andcopied.
3 Select the desired disc number.
DVD CREATION LIST
ALL(TOTAL:3)
DVD1
DVD2
DVD3
SET QUITCHECK
• If you select [ALL], all discs in the list arecreated.
• To preview scenes, select [CHECK].
• mark shows that the disc is createdalready.
4 Select [YES] or [NO].
• [YES]: Displays the thumbnails by group.
• [NO]: Displays the thumbnails by date.
5 Select [EXECUTE].
• The files are copied on the disc. When[COMPLETED] appears, touch OK.
• When [INSERT NEXT DISC PRESS[STOP] TO EXIT CREATE] appears,
change the disc. Remaining files arecopied on the second disc.
• To cancel copying, select [STOP].
Copying Video Files that Have NeverBeen Copied
Files that have never been copied to the DVDdiscs are automatically selected and copied.
1Open the LCD monitor to turn on thecamcorder.
2 Press DIRECT DVD.
INFO
DIRECT
DVD
3 Select [EXECUTE].
SET QUIT
RETURN
EXECUTE
UNSAVED SCENES
READY TO CREATE
DVD-R
• The DVD disc begins to be created.When [COMPLETED] appears, touchOK.
• When [INSERT NEXT DISC PRESS[STOP] TO EXIT CREATE] appears,change the disc. Remaining files arecopied on the second disc.
• To cancel the DVD creation, select[STOP].
L To quit the screen1) Select [QUIT].2) When [QUIT?] appears, select [YES].
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 43/7243
E N GL I S H
C OP Y I N G
Selecting Files for Backup
Preparation:
• Connect the camcorder to the DVD burner.
• Select ! mode.
1 Select [SELECT AND CREATE].
CREATE DVD
SELECT AND CREATE
CREATE DUPLICATE
CREATE FROM ALL
SET
COPY PREFERRED VIDEOS
PLAYBACK
2 Select the desired menu.
SELECT AND CREATE
CREATE BY EVENT
CREATE BY PLAYLIST
CREATE BY DATE
SET
COPY GROUPED VIDEOS BY
SELECT FROM SCENES
• [CREATE BY DATE]: Files are sorted according to the dateon which they were recorded. Relevantfiles are displayed in a list. Select therecording date.
• [CREATE BY EVENT]: Files are sorted according to event.Relevant files are displayed in a list.Select the event.
• [CREATE BY PLAYLIST]:Select the desired playlist from the listof playlists. The selected playlists aredisplayed in a list.1) Select the desired list.2) Select the insertion point. To select
other lists, repeat this process.3) Select [SAVE].
• [SELECT FROM SCENES]: Select files individually.1) Select the desired file. To select other
files, repeat this process.2) Select [SAVE].
3 Select the desired disc number.
DVD CREATION LIST
ALL(TOTAL:3)
DVD1
DVD2
DVD3
SET QUITCHECK
• If you select [ALL], all discs in the list arecreated.
• To preview scenes, select [CHECK].
• mark shows that the disc is createdalready.
4 Select [YES] or [NO].
• [YES]: Displays the thumbnails by group.
• [NO]: Displays the thumbnails by date.
5 Select [EXECUTE].
• The files are copied on the disc. When[COMPLETED] appears, touch OK.
• When [INSERT NEXT DISC PRESS[STOP] TO EXIT CREATE] appears,change the disc. Remaining files arecopied on the second disc.
• To cancel copying, select [STOP].
L To quit the screen1) Select [QUIT].2) When [QUIT?] appears, select [YES].
NOTE
In case of [CREATE BY PLAYLIST], date/timeon the file information display shows thedate of copying the file, instead of the actualrecording date.
L To duplicate a discThe last creation date is displayed. (Up to20 files)1) In step 1, select [CREATE DUPLICATE].2) Select the date and go to step 5.
L To check whether the DVD disc wascreated properlyIn step 1, select [PLAYBACK].
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 44/724
Copying Files (Continued)
L To play back the created disc using thecamcorder1) Connect the camcorder to the DVD
burner.2) Turn on the camcorder first, then turn on
the DVD burner.
3) Select [PLAYBACK].4) Select the desired folder.5) Select the creation date of the disc.6) Select the desired file. To return to the
previous screen, select@.
L Disc numberDisc number shows the number of DVDdiscs you can create. The dubbing rangeof each disc is automatically allocated,presuming that all the files are to be
dubbed from the first one on the list. Thisdubbing range cannot be changed.E.g.) “DVD1” can contain two files,“JAN.01.2009” and “JAN.15.2009”.
DVD1
DVD2
JAN. 01. 2009 09:05AM
JAN. 15. 2009 09:15AM
FEB. 01. 2009 09:05AM
FEB. 08. 2009 09:15AM
L Title and chapter of created DVDEach recording date becomes one title ina created DVD and each file recorded in asame day becomes one chapter in the title.
Digest Playback
You can play back a few seconds from eachselect scene of the recorded videos in thecreated DVD.Create a DVD using a DVD burner (CU-VD50/ CU-VD3).
1 Load the created DVD on the DVDplayer.
2 On the TV, select [DIGESTPLAYBACK].*
DIGEST PLAYBACK
NOV.01.2009 04:55PM
NOV.10.2009 02:23PM
NOV.01.2009 06:24PM
NOV.27.2009 04:52PM
NOV.03.2009 14:42PM
1/2
DEC.23.2009 11:15PM
You can view the previous or next page byselected £ / ¤.* The screen does not appear on thecamcorder.
3The digest is played backcontinuously.
L To normal playback / To the index menu1) Press the top menu button on the
remote control of the DVD device duringthe digest playback.
2) Select the desired item.
NOTE
“Digest Playback” menu is not availablewhen DVD is burned using the providedMediaBrowser software.
JAN. 11. 2009: file 3 and 4 were recorded.
JAN. 10. 2009: file 1 and 2 were recorded.
Create a DVD
File 1 File 2
File 4File 3
1 2 3 4
Title
Chapter
File 1 File 2 File 3 File 4
JAN.10.2009 JAN. 11.2009
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 45/7245
E N GL I S H
C OP Y I N G
Creating a DVD using a PC
You can copy the data from the camcorder andcreate a DVD using a PC.
Q Installing the software to the PC
System Requirements
Windows Vista
OS: Windows Vista ®
Home Basic (SP1)
Home Premium (SP1)
(32-bit, pre-installed)
CPU: Either one of the following:
• Intel ® Pentium ® 4, 1.6 GHz or higher
• Intel ® Pentium ® M, 1.4 GHz or higher
• Intel ® Core™ Duo, 1.5 GHz or higher
RAM: At least 1 GB
Windows XP
OS: Windows ® XP
Home Edition (SP2/SP3)
Professional (SP2/SP3)
(pre-installed)
CPU: Either one of the following:
• Intel ® Pentium ® 4, 1.6 GHz or higher
• Intel ® Pentium ® M, 1.4 GHz or higher
• Intel ® Core™ Duo, 1.5 GHz or higher
RAM: At least 512 MB
L To check the PC specification
Right-click on [Computer] (or [MyComputer]) in the [Start] menu and select
[Properties].
NOTE
• Make sure your PC has a recordable DVDdrive.
• If your system does not meet therequirements, it is recommended to copyfiles using the DVD burner. (Z p. 41)
•Macintosh users may use the software
included with their Macintosh (iMovie ’08,iPhoto) to copy files to their computer.
Preparation:Load the provided CD-ROM into the PC.In Windows Vista, the auto play dialog boxappears.
1 Click [Easy Installation].
Follow the on-screen instructions.
2 Click [Next].
3 Click [Finish].
Everio MediaBrowser icon is created onthe desktop.
L To see the Instruction Guide forEverio MediaBrowser
1) Double-click the icon of the Everio
MediaBrowser.
2) Click [Help], and click [MediaBrowser
Help]. Click Click
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 46/726
Copying Files (Continued)
R Making Backup on the PC
Preparation:
• Install the software to the PC.
• Make sure that enough free space is left in
the PC’s hardisk.• Close the LCD monitor to turn off thecamcorder.
1 Open the LCD monitor to turn on thecamcorder.
2 Select [BACK UP].
USB MENU
CREATE DVD
UPLOAD
EXPORT TO LIBRARY
SET QUIT
SAVE RECORDED VIDEO/STILL
BACK-UP
Everio MediaBrowser starts on the PC.
3 Click [All volume in camcorder] andclick [Next].
4 Click [Start].
Backup starts.
L To disconnect the camcorder from thePC
1) Right-click the icon (Safely Remove
Hardware) on the task bar and select
[Safely remove USB Mass Storage
Device].
2) Follow the on-screen instructions and
make sure that the device can be safelyremoved.
3) Disconnect the USB cable and close the
LCD monitor.
NOTE
It takes time to back up many videos.
USB Cable
USB Connector
USB Connector
DCConnector
AC Adapter
To AC Outlet
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 47/7247
E N GL I S H
C OP Y I N G
S Making User Lists to Arrange theFiles
You can make a user list of a certain subject(such as Travel, Athletic meet) and put the filesrelated to the subject into the user list.
Preparation:Make backup on the PC.
1 Double-click the icon and open thecalendar.
2 Select [Movies only].
3 Click [+].
4 Input the name of the new user listand click [OK].
5 Double-click the recording date.
The files recorded on the day aredisplayed.
6 Drag the file and drop into the userlist.
To add other files into the user list, repeatsteps 5 and 6.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 48/728
Copying Files (Continued)
T Copying Files to a DVD
Preparation:Use a recordable DVD disc. (It isrecommended to use a DVD-R disc.)
1 Select the user list and click [CreateDisc].
2 Click [Select files individually] andclick [Next].
To add all the files onto DVD discs, click[Select all files displayed], then go to step 4.
3 Drag the file, and drop into the partat the bottom and click [Next].
4 Input the disc name, select the topmenu style and click [Next].
5 Click [Start].
NOTE
• For detail on operating Everio MediaBrowser,click [Help] and refer to “MediaBrowser Help”.
• Adobe ® Reader ® must be installed to read“MediaBrowser Help”. Adobe ® Reader ® canbe loaded from Adobe’s web site:
http://www.adobe.com• For assistance in operating the provided
software, refer to the support information.(Z p. 49)
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 49/7249
E N GL I S H
C OP Y I N G
[XXXJVCSO]
[DCIM]
[SD_VIDEO]
[EXTMOV]
[PRIVATE]
[MGR_INFO]
[PRGXXX]
[PRGXXX]
[PRGXXX.PGI]
[MOVXXX.MOD]
[MOVXXX.MOI]
[MOV_XXX.MOD]
* Information such as the date and time of recording, recorded with the video file.
Recording medium X = number
Management information*
Contains the video file folders.
Contains the still image folders.
Management information* for the media as a whole
Video file
Management information* for the video files
Contains management information files of event and/or DVDcreation information for the files taken with the camcorder.
Video file which management information is corrupted.
Folder Structure and Extensions
Customer Support Information
Use of this software is authorized according to the terms of the software licence.
JVCWhen contacting the nearest JVC office or agency in your country (refer to the JVC Worldwide ServiceNetwork at http://www.jvc-victor.co.jp/english/worldmap/index-e.html) about this software, please have
the following information ready.
• Product Name, Model, Problem, Error Message• PC (Manufacturer, Model (Desktop/Laptop), CPU, OS, Memory (MB), Available Hard Disk Space (GB))
Please note that it may take some time to respond to your questions, depending on their subject matter.JVC cannot answer questions regarding basic operation of your PC, or questions regarding specificationsor performance of the OS, other applications or drivers.
PixelaRegion Language Phone #
USA and Canada English +1-800-458-4029 (toll-free)
Europe (UK, Germany, France,and Spain)
English/German/French/Spanish +800-1532-4865 (toll-free)
Other Countries in EuropeEnglish/German/French/Spanish/
Italian/Dutch+44-1489-564-764
Asia (Philippines) English +63-2-438-0090
China Chinese +86-21-5385-3786
Homepage: http://www.pixela.co.jp/oem/jvc/e/index.htmlPlease check our website for latest information and downloading.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 50/720
1 Open the LCD monitor to turn on thecamcorder.
2 Set the VCR/DVD recorder to its AUXinput mode.
Check that the images from the camcorderare input correctly to the VCR/DVDrecorder.
3 Play back playlists on the camcorder.
1) Touch MENU.2) Select [DUBBING PLAYBACK].3) Select the desired playlist.4) Select [YES]. (A black screen is
displayed for 5 seconds at the first andthe last scene.)
4 At the point you want to startdubbing, start recording on the VCR/ DVD recorder.Refer to the VCR/DVD recorder’sinstruction manual.
L To stop dubbing
Stop recording on the VCR/DVD recorder,then press START/STOP again.
L To hide the date or icons on the screen Change the settings in [DISPLAY ON TV].
(Z p. 58)
Dubbing Files to a VCR/DVD Recorder
Preparation:
• Create a playlist.
• Turn off all units.
L To connect using the AV connectors(analog dubbing)
AV
DC Connector
To AC Outlet
AV Cable
AV Connector(Input)
VCR/DVD Recorder
AC Adapter
AV Connector
Copying Files (Continued)
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 51/72
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 52/722
Transferring the Files to PC
Preparation:
• Install iTunes ® on a PC. http://www.apple.com/itunes/
1 Connect the camcorder to the PCwith the USB cable.
2 Select [EXPORT TO LIBRARY].
USB MENU
CREATE DVD
UPLOAD
EXPORT TO LIBRARY
SET QUIT
EASY VIDEO REGISTRATION
BACK UP
All the files with the export setting turnedon are transferred to PC.
LCannot export the file to iTunes ®
• Refer to “Q&A”, “Latest Information”,“Download Information”, etc. in [Click forLatest Product Info] in the help of theprovided Everio MediaBrowser software.
Using with a Portable Media Player (Continued)
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 53/7253
E N GL I S H
C OP Y I N G
Uploading Files to Websites
Turning on the Upload Mode
You can upload the file to video sharingwebsites (YouTube™) quickly after recording.For more information on YouTube™, visit
YouTube™ website: http://www.youtube.com/
Preparation:
• Select ! mode.
• Select the recording mode.
Press UPLOAD twice.
ON
UPLOAD REC
UPLOAD
If you record a file with the upload mode
set on, the recording stops automatically
10 minutes after the recording is started.
The remaining time is displayed on the
LCD monitor.
NOTE
The upload mode turns off each timerecording is finished.
Upload Trimming
You can select the necessary part of thevideo and save it as a new video file ready foruploading.
Preparation:
• Select ! mode.
• Select the playback mode.
1 Touch MENU.
2 Select [UPLOAD SETTINGS].
VIDEO
UPLOAD SETTINGS
SEARCH
DELETE
SET QUIT
SELECT SCENE FOR UPLOADING
PLAYBACK PLAYLISTv
$
3 Select the desired file.
UPLOAD SETTINGS
SET QUIT
1/2
4 Select [SET] at the start point.
QUITQ KJ
J
SET
TRIM (FROM HERE)
E
0 : 12 : 05
S
5 Select [SET] at the end point.
QUITQ KJCANCEL
J
SET
TRIM (UNTIL HERE)
E
0 : 08 : 050 : 12 : 05
S
• The duration between the start point andthe end point cannot be longer than10 minutes.
• To cancel the start point setting, select[CANCEL].
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 54/724
6 Select [CAPTURE TRIMMED FILE].
QUITSET
SET
E
0 : 08 : 050 : 12 : 05
S
CAPTURE TRIMMED FILE
REDEFINE AREA
To set the start/end point again, select
[REDEFINE AREA].
7 Select [YES].When copying is finished, the copied file is
added to the index screen.
L To quit the screen
Select [QUIT].
Uploading Files
For details on uploading files, refer to theoperation guide of MediaBrowser in theCD-ROM.
1 Connect the camcorder to the PCwith the USB cable.
2 Select [UPLOAD].
USB MENU
CREATE DVD
UPLOAD
EXPORT TO LIBRARY
SET QUIT
EASY UPLOAD TO VIDEO
PLAYBACK ON PC
LCannot upload the file toYouTube™Cannot upload the file to YouTube™
• You need your YouTube™ account toupload files to YouTube™. Create youraccount.
• Refer to “Q&A”, “Latest Information”,“Download Information”, etc. in [Click forLatest Product Info] in the help of theprovided Everio MediaBrowser software.
Uploading Files to Websites (Continued)
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 55/7255
E N GL I S H
F U R T H E R
I N F OR MA T I ON
1 Touch MENU.
2 Select the desired menu.
VIDEO
VIDEO QUALITY
REGISTER EVENT
DIS
SET QUIT
IMAGE BLURRED NEED TO
ZOOM
n
@
q
@
B
0
3 Select the desired setting.
VIDEO QUALITY
REGISTER EVENT
DIS
ZOOM
n
@
q
@
C
0
VIDEO QUALIT
REGISTER EVENT
OOM@
q
@
VIDEO
SET QUIT
OFF
0
1
ON
Changing the Menu Settings
L To return to the previous screenSelect@.
L To quit the screenSelect [QUIT].
Mode Menus Settings: [ ] = Factory-preset
! # MANUAL SETTING See page 28. (In the manual recording mode only)
! # D LIGHT See page 22.
! REGISTER EVENT See page 23.
#
z SELF-TIMERStarts recording when the set timeelapses after the SNAPSHOT button is pressed.
[OFF] / 2SEC / 10SEC
NOTE
• You can confirm the countdown on the camcorderscreen.
• It is recommended to attach the camcorder to atripod and use this function to prevent the vibrationafter SNAPSHOT is pressed.
#
8 SHUTTER MODERecords still imagescontinuously while SNAPSHOT button is pressed.
[RECORD ONE SHOT]: Records one still image
at a time.CONTINUOUS SHOOTING:Records still images continuously whileSNAPSHOT is pressed.
NOTE
• The interval between recording still images isapprox. 0.3 seconds.
• Continuous shooting may not work well dependingon the recording medium.
• The continuous shooting speed will drop if thisfunction is used repeatedly.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 56/726
Changing the Menu Settings (Continued)
Mode Menus Settings: [ ] = Factory-preset
! n VIDEO QUALITYSets the video quality.
[ULTRA FINE] / FINE / NORMAL / ECONOMY
# n IMAGE QUALITYSets the image quality.
[FINE] / STANDARD
! @ ZOOMZOOMSets the maximum zoom ratio.
35X/OPTICAL / 40X/DYNAMIC* / [80X/DIGITAL] /800X/DIGITAL* Dynamic zoomThe combination of optical and digital zoomtechnology offers higher zoom ratio than optical zoomwithout reducing the quality.
NOTE
Optical zoom is used up to [35X/OPTICAL]. Digitalzoom is used from more than [35X/OPTICAL] up tothe selected zoom ratio.
! q DISDISCompensates for hand shake.
OFF: Disables the function.[ON]: Activates the function.
NOTE
• Complete stabilization may not be possible if handshake is excessive, or depending on the shootingconditions.
• Switch off this mode when recording with thecamcorder on a tripod.
! #
GAIN UPMakes the subject appear brightautomatically when you record indark places. However, the overallcolor tones appear grayish.
! mode OFF: Deactivates the function.AGC : Electrically brightens the scene in dark place.[AUTO]: Automatically brightens the scene when
it is dark. (Becomes brighter than [AGC]. Themotion of a subject may look unnatural ifrecorded in some condition.)
# modeOFF: Deactivates the function.[AGC] : Electrically brightens the scene in dark place.
! ! SELECT ASPECT RATIOSelects the aspect ratio for videos.
[16:9]: Records videos in 16:9 size.4:3: Records videos in 4:3 size.
NOTE
• If the [VIDEO QUALITY] is set to [ECONOMY], youcannot record in 16:9 size.
• If you want to copy the recorded videos onto DVDdiscs, it is recommended not to mix 16:9 sizevideos and 4:3 size videos.
! o WIND CUTReduces noise caused by wind.
[OFF]: Deactivates the function.ON: Activates the function.
!
AUTO SWITCH REC MEDIASwitches recording mediaautomatically from SLOT A toSLOT B and vice versa after thecard in the selected slot is full.
OFF: Deactivates the function.
[ON]: Activates the function.NOTE
The switching time of the SD cards requiresapproximately 3 seconds. If there are many videos anddata in the SD card, it might take up to a few minutes toperform the switch. No video is recorded during that time.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 57/72
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 58/728
Menus Settings: [ ] = Factory-preset
REC RECORD BUTTONRECORD BUTTONEnables the recording button[REC] on the LCD monitor.
OFF: Deactivates the function.[ON]: Activates the function.
& QUICK RESTARTEnables the camcorder to startup quickly when you turn off thecamcorder and then on againwithin 5 minutes by closing andopening the LCD monitor.
OFF: Deactivates the function.[ON]: If the LCD monitor is opened again within 5 minutes,
the camcorder starts quickly. The power consumptionused for the 5 minute period after the LCD monitoris closed is approximately 1/3 of that used duringrecording. This enables you to save more power thanleaving the power on.
UPDATEUpdates and improves the
system software.
YES: Performs this function.[NO]: Cancels this function.
NOTE
Information about obtaining system update will be madeavailable on the JVC’s website.
Z FACTORY PRESETReturns all the camcordersettings to their default values.
YES: Performs this function.[NO]: Returns to the menu screen without executing reset.
CONNECTION SETTINGS Select [CONNECTION SETTINGS], then select sub-menus.
% DISPLAY ON TVDisplays camcorder’s on-screendisplay on a TV screen.
[OFF]: Does not display on TV.ON: Displays on TV.
VIDEO OUTPUTSets the aspect (16:9/4:3) to thescreen of the connectedtelevision when outputting videosfrom the AV connector.
4:3 / [16:9]
Menus Settings: [ ] = Factory-preset
MEDIA SETTINGS Select [MEDIA SETTINGS], then select sub-menus.
VIDEO SLOT SELECTIONSelects recording media forvideo.
[SLOT A] / SLOT B
IMAGE SLOT SELECTIONSelects recording media for stillimage.
[SLOT A] / SLOT B
, FORMAT SD CARDYou have to format newlypurchased SD cards with thiscamera before using them.This will also ensure stablespeeds and operation whenaccessing the SD card.
[SLOT A] / SLOT B[FILE]: Initializes all files in the SD card.FILE + MANAGEMENT NO:
Initializes all files and management numbers in the
SD card.NOTE
Be aware that all files and data including protected files will beerased by the formatting process.
Changing the Menu Settings (Continued)
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 59/72
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 60/72
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 61/7261
E N GL I S H
F U R T H E R
I N F OR MA T I ON
Trouble Action
P l a
y b a ck
Sound or video areinterrupted.
• Sometimes playback is interrupted at the connecting sectionbetween two scenes. This is not a malfunction.
Cannot find a recordedvideo/image.
• Select [PLAYBACK MPG FILE] then search the video on the indexscreen.
(Video files that have damaged management information can beplayed back.)
• Cancel group display and date search functions.
• Change the setting in [VIDEO SLOT SELECTION] or [IMAGESLOT SELECTION]. (Files on other media are not displayed.)
• Slide the mode switch to select the desired mode (! or #).
Some functions cannotbe used when playingback a backup DVDthrough a DVD burnerconnected to the
camcorder.
• The following functions cannot be used for a backup DVD.When playing back video - Search index by date- Playback effectsWhen playing back still image
- Playback effects
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 62/72
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 63/7263
E N GL I S H
F U R T H E R
I N F OR MA T I ON
Indication Action
SET DATE/TIME!• Set the clock. If the message still appears after setting the clock,
the battery for the clock has been depleted. Consult your nearestJVC dealer.
COMMUNICATING ERROR • Be sure to use JVC battery packs.
NOT FORMATTED • Select [OK] and select [YES] to perform formatting.
FORMAT ERROR! • Check the operating procedure, and perform once again.
• Turn off the camcorder, and turn it on again.DATA DELETION ERROR
MEMORY CARD ERROR!
• Turn off the camcorder, and turn it on again.
• Remove and re-insert the SD card. (MultiMediaCard cannot beused.)
• Remove any dirt from the SD card terminals.
• Insert the SD card before switching the power on.
• If the problem persists, backup all data, and then perform
formatting. (All data is deleted).
CANNOT TAKE MORE STILLIMAGES AT THE MOMENT
• Stop video recording, and then record a still image. (If an SDcard is removed or inserted during video recording, a still imagecannot be recorded.)
RECORDING CANCELLED
• Insert a new or formatted SD card. Set [VIDEO SLOTSELECTION] to different slot, then record to an SD card in[SLOT A] or [SLOT B].
• Turn off the camcorder and turn it on again.
RECORDING FAILURE • Turn off the camcorder, and turn it on again.
USE AC ADAPTER • Use the AC Adapter as power supply.
Warning Indications
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 64/72
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 65/7265
E N GL I S H
F U R T H E R
I N F OR MA T I ON
Cleaning
Before cleaning, turn off the camcorder and remove the battery pack and AC adapter.
L To clean the camcorderWipe the camcorder gently with a soft cloth. If the camcorder is particularly dirty, dip the clothinto diluted mild soap and wring it out well. After wiping with the wet cloth, wipe again with adry cloth.
L To clean the LCD monitorWipe the LCD monitor gently with a soft cloth. Be careful not to damage the LCD monitor.
L To clean the lensWipe the lens gently with lens cleaning cloth.
NOTE• Avoid using strong cleaning agents such as benzine or alcohol.
• Mold may form if the lens is left dirty.
• When using a cleaner or chemically treated cloth, refer to the cautions for each product.
Indication Action
DVD-RW DISC HAS BEENALREADY USED
• Replace the disc of the DVD burner with another disc.(A DVD-RW disc can be initialized.)
FINALIZATION FAILED • Replace the disc of the DVD burner with another disc.
NO FILES • Slide the mode switch to select the desired mode (! or #).
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 66/72
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 67/7267
E N GL I S H
F U R T H E R
I N F OR MA T I ON
hr: hour/min: minuteApproximate recording time (for video)
Recordingmedium
Quality
SD or SDHC Card
256 MB 512 MB 1 GB 2 GB 4 GB 8 GB 16 GB 32 GB
ULTRA FINE 3 min. 6 min. 14 min. 29 min. 1 hr.1 hr.
50 min.3 hr.
45 min.7 hr.
30 min.
FINE 5 min. 10 min. 21 min. 43 min.1 hr.
20 min.2 hr.
50 min.5 hr.
40 min.11 hr.
20 min.
NORMAL 6 min. 13 min. 29 min. 1 hr.1 hr.
50 min.3 hr.
45 min.7 hr.
30 min.15 hr
ECONOMY 18 min. 36 min.1 hr.
20 min.2 hr.
30 min.5 hr.
9 hr.55 min.
20 hr. 40 hr.
Approximate number of storable images (for still image)
M o d e
Recording medium
Image size/Quality
SD & SDHC Card
256 MB 512 MB 1 GB 2 GB 4 GB 8 GB 16 GB 32 GB
!4 : 3
832 x 624 / FINE 970 1950 3950 7590 9999 9999 9999 9999
832 x 624 / STANDARD 1450 2920 5930 9999 9999 9999 9999 9999
#640 x 480 / FINE 1450 2920 5930 9999 9999 9999 9999 9999
640 x 480 / STANDARD 2080 4180 8480 9999 9999 9999 9999 9999
!1 6 : 9
640 x 360 / FINE 1820 3660 7420 9999 9999 9999 9999 9999
640 x 360 / STANDARD 2420 4880 9890 9999 9999 9999 9999 9999
The recordable time and the number of still images are approximate and may differ dependingon the recording environment, the condition of the SD card, or the remaining battery power.
hr: hour/m: minuteRequired charging/recording time (approx.)
Battery pack Charging time Recording time
BN-VF808U(Provided)
1 hr. 50 m 2 hr. 45 m*
BN-VF815U 2 hr. 40 m 5 hr. 25 m*
BN-VF823U 3 hr. 40 m 8 hr. 10 m** When the LED light is off and the monitor backlight is set to [STANDARD] mode.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 68/728
AC Adapter
When using the AC adapter in areas otherthan the USAThe provided AC adapter features automaticvoltage selection in the AC range from 110 V to240 V.
USING HOUSEHOLD AC PLUG ADAPTERIn case of connecting the unit’s power cord toan AC wall outlet other than American NationalStandard C73 series type use an AC plugadapter, called a “Siemens Plug”, as shown.For this AC plug adapter, consult your nearestJVC dealer.
Battery Pack
The supplied battery pack isa lithium-ion battery. Beforeusing the supplied batterypack or an optional batterypack, be sure to read the
following cautions:
Terminals
• To avoid hazards... do not burn.... do not short-circuit the terminals. Keep it away
from metallic objects when not in use. Whentransporting, make sure the provided batterycap is attached to the battery. If the batterycap is misplaced, carry the battery in a plasticbag.
... do not modify or disassemble.
... do not expose the battery to temperaturesexceeding 60°C, as this may cause the batteryto overheat, explode or catch fire.
... use only specified chargers.
• To prevent damage and prolong service life... do not subject to unnecessary shock.... charge within the temperature range of 10°C
to 35°C (50°F to 95°F). This is a chemicalreaction type battery — cooler temperaturesimpede chemical reaction, while warmertemperatures can prevent complete charging.
... store in a cool, dry place. Extended exposureto high temperatures will increase natural
discharge and shorten service life.... fully charge and then fully discharge the
battery every 6 months when storing thebattery pack over a long period time.
... remove from charger or powered unit whennot in use, as some machines use currenteven when switched off.
ATTENTION:The battery youhave purchased isrecyclable. Please call1-800-8-BATTERY forinformation on how torecycle this battery.
Recording Medium (SD Card)
• Be sure to follow the guidelines belowto prevent corruption or damage to yourrecorded data.
• Do not bend or drop the recording medium, orsubject it to strong pressure, jolts or vibrations.
• Do not splash the recording medium with water.• Do not use, replace, or store the recording
medium in locations that are exposed to strongstatic electricity or electrical noise.
• Do not turn off the camcorder power or removethe battery or AC adapter during shooting,playback, or when otherwise accessing therecording medium.
• Do not bring the recording medium near objectsthat have a strong magnetic field or that emitstrong electromagnetic waves.
• Do not store the recording medium in locations
with high temperature or high humidity.• Do not touch the metal parts.
LCD Monitor
• To prevent damage to the LCD monitor, DONOT
... push it strongly or apply any shocks.
... place the camcorder with LCD monitor on thebottom.
• To prolong service life
... avoid rubbing it with coarse cloth.
Cautions
Plug Adapter
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 69/7269
E N GL I S H
F U R T H E R
I N F OR MA T I ON
Main Unit
• For safety, DO NOT... open the camcorder’s chassis.... disassemble or modify the unit.... allow inflammables, water or metallic objects
to enter the unit.... remove the battery pack or disconnect thepower supply while the power is on.
... leave the battery pack attached when thecamcorder is not in use.
... place naked flame sources, such as lightedcandles, on the apparatus.
... expose the apparatus to dripping or splashing.
... leave dust or metal objects adhered to thepower plug or an AC wall outlet.
... insert any objects in the camcorder.
• Avoid using the unit... in places subject to excessive humidity or dust.... in places subject to soot or steam such as
near a cooking stove.... near appliances generating strong magnetic
or electric fields (speakers, broadcastingantennas, etc.).
... in places subject to extremely high (over 40°Cor 104°F) or extremely low (under 0°C or 32°F)temperatures.
• DO NOT leave the unit... in places of over 50°C (122°F).... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
... in direct sunlight.... in a closed car in summer.
... near a heater.
... in high places such as on a TV. Leaving theunit in high places while a cable is connectedmay result in a malfunction if the cable iscaught and the unit falls onto the floor.
... place the camcorder in dusty or sandy areas,such as on a beach.
• To protect the unit, DO NOT... allow it to become wet.... drop the unit or strike it against hard objects.... subject it to shock or excessive vibration
during transportation.... keep the lens directed at extremely bright
objects for long periods.... expose the lens to direct sunlight.... swing it excessively when using the hand
strap.... swing the soft camcorder case excessively
when the camcorder is inside it.
• To prevent the unit from dropping,
• Fasten the grip belt securely.
• When using the camcorder with a tripod, attachthe camcorder to the tripod securely.
If the camcorder drops, you may be injuredand the camcorder may be damaged. When a child uses the unit, there must be
parental guidance.
Declaration of ConformityModel Number: GZ-MS120AU/BU/RUTrade Name: JVCResponsible party: JVC AMERICAS CORP.Address: 1700 Valley Road Wayne, N. J. 07470Telephone Number: 973-317-5000
This device complies with Part 15 of FCCRules. Operation is subject to the followingtwo conditions: (1) This device may not causeharmful interference, and (2) this device mustaccept any interference received, includinginterference that may cause undesiredoperation.
Changes or modifications not approvedby JVC could void the user’s authority tooperate the equipment. This equipment has
been tested and found to comply with thelimits for a Class B digital device, pursuantto Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protectionagainst harmful interference in a residentialinstallation. This equipment generates, uses,and can radiate radio frequency energy and, ifnot installed and used in accordance with theinstructions, may cause harmful interferenceto radio communications. However, there isno guarantee that interference will not occur
in a particular installation. If this equipmentdoes cause harmful interference to radio ortelevision reception, which can be determinedby turning the equipment off and on, theuser is encouraged to try to correct theinterference by one or more of the followingmeasures: Reorient or relocate the receivingantenna. Increase the separation between theequipment and receiver.Connect the equipment into an outlet on acircuit different from that to which the receiver
is connected.Consult the dealer or an experienced radio/TVtechnician for help.
This Class B digital apparatus complies withCanadian ICES-003.Cet appareil numérique de la classe B estconforme à la norme NMB-003 du Canada.
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 70/720
JVC SOFTWARE LICENCE AGREEMENT
IMPORTANTTO CUSTOMERS: PLEASE MAKE SURE TOREAD THIS CAREFULLY BEFORE INSTALLINGOR USING THE SOFTWARE PROGRAM
NAMED “DIGITAL PHOTO NAVIGATOR”(“Program”) ON YOUR PC.The right to use the Program is granted by VictorCompany of Japan, Limited (“JVC”) to You onlyon the condition that You agree to the following.Should You not agree to the terms hereof, Youmay not install or use the Program. HOWEVER,INSTALLING OR USING THE PROGRAMINDICATES YOUR ACCEPTANCE OF THESETERMS AND CONDITIONS.
1 COPYRIGHT; OWNERSHIPYou acknowledge that all copyrights and otherintellectual property rights in the Program areowned by JVC and its licensor, and remainvested in JVC and such licensor. The Program isprotected under the copyright law of Japan andother countries, and related Conventions.
2 GRANT OF LICENCE(1) Subject to the conditions of this Agreement,
JVC grants to You a non-exclusive right to
use the Program. You may install and use theProgram on a HDD or other storage devicesincorporated in Your PC.
(2) You may make one (1) copy of the Programsolely for your personal backup or archivalpurposes.
3 RESTRICTION ON THE PROGRAM(1) You may not reverse engineer, decompile,
disassemble, revise or modify the Program,except to the extent that expressly permitted
by applicable law.(2) You may not copy or use the Program, in
whole or in part, other than as expresslyspecified in this Agreement.
(3) You have no right to grant a licence to usethe Program, and may not distribute, rent,lease or transfer the Program to any thirdparty or otherwise let them use the Program.
4 LIMITED WARRANTYJVC warrants that any media in which theProgram is embodied are free from any defectsin materials and workmanship for a period ofthirty (30) days from the date of Your purchasingany our products accompanying the Program.
JVC’s entire liability and your exclusive remedyin connection with the Program shall bereplacement of such defective media. EXCEPTFOR THE EXPRESS WARRANTIES STATEDHEREIN AND TO THE EXTENT PERMITTED BYAPPLICABLE LAW, JVC AND ITS LICENSORSDISCLAIM ANY OTHER WARRANTIES, EITHEREXPRESS OR IMPLIED, INCLUDING BUTNOT LIMITED TO IMPLIED WARRANTIESOF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE IN REGARD TO
THE PROGRAM AND THE ACCOMPANYINGPRINTED MATERIALS. SHOULD THERE BEANY PROBLEM ARISING FROM OR CAUSEDBY THE PROGRAM, YOU SHOULD SETTLEALL SUCH PROBLEM AT YOUR OWN COSTAND EXPENSE.
5 LIMITED LIABILITYTO THE EXTENT PERMITTED BY APPLICABLELAW, IN NO EVENT SHALL JVC AND ITSLICENSORS BE LIABLE FOR ANY INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIALDAMAGES WHATSOEVER, REGARDLESSOF THE FORM OF ACTION WHETHER INCONTRACT, TORT OR OTHERWISE ARISINGOUT OF OR IN CONNECTION WITH THE USEOF OR INABILITY TO USE THE PROGRAM,EVEN IF JVC HAS BEEN ADVISED OF THEPOSSIBILITY OF SUCH DAMAGES. YOUWILL INDEMNIFY AND HOLD HARMLESSJVC FROM ANY LOSS, LIABILITY ORCOST ARISING OUT OF OR IN ANY WAY
CONNECTED TO CLAIMS FROM ANY THIRDPARTY RELATING TO THE USE OF THEPROGRAM.
JVC Software Licence Agreement
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 71/7271
E N GL I S H
F U R T H E R
I N F OR MA T I ON
6 TERMThis Agreement will become effective on the datewhen You install and use the Program on Yourmachine, and continue to be in effect until thetermination under the following provision.Should You breach any provision of this
Agreement, JVC may terminate this Agreementwithout giving any notice to You. In this event,JVC may claim against You for any damagescaused by Your breach. Should this Agreementbe terminated, You must immediately destroy theProgram stored in Your machine (including theerasing from any memory in Your PC), and nolonger own such Program.
7 EXPORT CONTROLYou agree that You will not ship, transfer or
export the Program or underlying informationand technology to any countries to which Japanand other relevant countries have initiated anembargo on such goods.
8 U.S. GOVERNMENT USERIf You are an agency of the United States ofAmerica (the “Government”), You acknowledgeJVC’s representation that the Program isa “Commercial Item” as defined in FederalAcquisition Regulation (FAR) part 2.101 (g)
consisting unpublished “Commercial ComputerSoftware” as those items are used at FAR part12.212 and is only licenced to You with the sameuse rights JVC grants all commercial end userspursuant to the terms of this Agreement.
9 GENERAL(1) No modification, change, addition, deletion
or other alternation of or to this Agreementwill be valid unless reduced to writing andsigned by an authorized representative of
JVC.(2) If any part of this Agreement is held
invalid by or in conflict with any law having jurisdiction over this Agreement, theremaining provisions will remain in full forceand effect.
(3) This Agreement shall be governed by andinterpreted under the laws of Japan. TheTokyo District Court has jurisdiction over alldisputes which may arise with respect to theexecution, interpretation and performance ofthis Agreement.
Victor Company of Japan, Limited
NOTE
If You acquired the Program in Germany, theprovisions of Sections 4 (Limited Warranty)and 5 (Limited Liability) provided above will bereplaced with those of the German version of thisAgreement.
CAUTIONS:• Operate this equipment according to the
operating procedures described in this manual.
• Use only the provided CD-ROM. Never use anyother CD-ROM to run this software.
• Do not attempt to modify this software.
• Changes or modifications not approved byJVC could void user’s authority to operate theequipment.
How to handle a CD-ROM• Take care not to soil or scratch the mirror
surface (opposite to the printed surface). Donot write anything or put a sticker on eitherthe front or back surface. If the CD-ROMgets dirty, gently wipe it with a soft clothoutward from the center hole.
• Do not use conventional disc cleaners orcleaning spray.
• Do not bend the CD-ROM or touch its mirrorsurface.
• Do not store your CD-ROM in a dusty, hot orhumid environment. Keep it away from directsunlight.
You can find the latest information (inEnglish) on the provided software program atour world wide web server athttp://www.jvc-victor.co.jp/english/global-e.html
8/13/2019 JVC Camcorder
http://slidepdf.com/reader/full/jvc-camcorder 72/72
Terms
A AC Adapter ................................................. 16, 68Adjust Brightness .............................................. 29Auto Power Off .................................................. 57AV Connection ............................................. 31, 50
B Backlight Compensation ................................... 28Battery Pack ................................................ 16, 68
C CD-ROM ................................................ 11, 45, 71 Clock Adjust ...................................................... 16
Copying Files .................................................... 40
D Date/Time Setting ......................................... 5, 16Date Display Style ............................................ 57Daylight Saving Time ......................................... 17Deleting Files .................................................... 32Demo Mode ...................................................... 57Digest Playback ........................................... 24, 44Digital Image Stabilizer (DIS) ............................ 56Display on TV .................................................... 58Dubbing Playback .............................................. 50DVD Backup ...............................................42 - 44DVD Burner ........................................................ 41
E Effect ................................................................. 30Event Registration ............................................. 23Export to Library Mode ...................................... 51
F Factory Preset .................................................. 58 File Information ................................................. 35 File Search ................................................... 26, 27 Date Index Screen Event Screen Group Index Screen
Finalize .............................................................. 41Focus ................................................................ 29Format SD card ................................................ 58
G Gain Up ............................................................. 56
I Image Quality .................................................... 56 iTunes ................................................................ 52
L Language Setting .............................................. 17LCD Monitor ................................................ 14, 68LED Light .......................................................... 22
M Manual Recording ............................................. 28Menu Settings ................................................... 55Monitor Backlight .............................................. 57Monitor Bright .................................................... 57
N Number of Images ............................................ 67
O On-screen Recording Control ........................... 20
On-screen Zoom Control ................................... 22 Operation Sound ............................................... 57
P Photometry Area ............................................... 30Playlists ............................................................. 38Portable Media Player ....................................... 51Protecting Files ................................................. 34
Q Quick Restart .................................................... 58 Quick Review ............................................... 20, 21
R Recordable Time .............................................. 67Record Button ................................................... 58Recording Medium ...................................... 58, 68
Remaining Battery Power ................................. 22Remaining Recording Time .............................. 23
S Scene Select ..................................................... 29SD Card ............................................................ 19Select Aspect Ratio ........................................... 56Self-Timer ......................................................... 55Shutter Mode ..................................................... 55Shutter Speed ................................................... 29Speaker Volume ................................................. 24
T Tele Macro ........................................................ 30Trimming Files ................................................... 37
U Updating Software ............................................. 58 Uploading Files ................................................. 54 USB Cable ................................................... 41, 46
V Video Output ..................................................... 58Video Quality ..................................................... 56Viewing Files on TV ........................................... 31
W White Balance (WB) ......................................... 30Wind Cut ........................................................... 56
Y YouTube ........................................................... 53
Z Zoom ........................................................... 22, 56
Top Related