Download - Company Profile

Call: + 91 9444376043, email: [email protected]

1 | P a g e

SCANSTAR NDT SERVICES

Company Profile

NDT Services & Training

An ISO 9001: 2008 Certified Company

www.scanstarndt.co.in

2011


2 | P a g e

Table of ContentsTable of ContentsTable of ContentsTable of Contents

1 ABOUT SCANSTAR NDT SERVICES……………………………………………………………………………

4

1.1 Introduction……………………………………………………………………………………………………………….. 4

1.2 Vision…………………………………………………………………………………………………………………………. 4

1.3 Mission………………………………………………………………………………………………………………………. 4

1.4 Values………………………………………………………………………………………………………………………… 4

1.5 NDT Services Providers in various fields……………………………………………………………………… 5

1.6 Certification……………………………………………………………………………………………………………….. 5

1.6.1 ISO 9001: 2008 Certified Company…………………………………………………………………………….. 5

1.6.2 ASNT Level III Certificate………………………………………………………………………………………….... 6

1.6.3 Small Scale Industries Certificate……………………………………………………………………………….. 7

1.6.4 Service Tax Certificate……………………………………………………………………………………………….. 8

1.6.5 Income Tax PAN Certificate……………………………………………………………………………………….. 9

1.6.6 Importer Exporter Code……………………………………………………………………………………………… 9

1.7 Skill & Personnel qualities of NDT Technician…………………………………………………………….. 10

1.8 Training Methodology……………………………………………………………………………………………….. 10

2

NDT SERVICES OFFERED………………………………………………………………………………………….

11

2.1 Ultrasonic Flaw Detection………………………………………………………………………………………….. 12

2.2 Ultrasonic Thickness gauging…………………………………………………………………………………….. 12

2.3 Eddy Current Testing…………………………………………………………………………………………………. 13

2.4 Magnetic Particle Testing…………………………………………………………………………………………… 14

2.5 Penetrant Testing………………………………………………………………………………………………………. 14

2.6 Visual Inspection……………………………………………………………………………………………………….. 15

2.7 Vibration Analysis………………………………………………………………………………………………………. 15

2.8 Infrared & Thermography Testing……………………………………………………………………………… 16

3 ENGINEERING SPECIAL SERVICES……………………………………………………………………………. 17

3.1 Residual Life Assessment (RLA)………………………………………………………………………………….. 17

3.2 Level III Services…………………………………………………………………………………………………………. 18

3.3 Welding Inspection, Welder Qualification………………………………………………………………….. 18

3.4 Hardness Testing……………………………………………………………………………………………………….. 19

3.5 Equipment Calibration……………………………………………………………………………………………… 19

4

TRAINING……………………………………………………………………………………………………………….

20

4.1 NDT Training & Certification Program………………………………………………………………………… 20

4.2 Level III Refresher Courses…………………………………………………………………………………………. 20

5 PARTIAL CLIENT LIST………………………………………………………………………………………………. 21


3 | P a g e

6

SERVICES EXECUTED BY SCANSTAR………………………………………………………………………….

22

6.1 Ultrasonic Flaw Detection………………………………………………………………………………………….. 22

6.2 Ultrasonic Thickness Gauging…………………………………………………………………………………….. 23

6.3 Eddy Current Tube Inspection……………………………………………………………………………………. 24

6.4 Eddy Current Sorting………………………………………………………………………………………………….. 26

6.5 Eddy Current Conductivity…………………………………………………………………………………………. 26

6.6 Magnetic Particle Testing…………………………………………………………………………………………… 26

6.7 Penetrant Testing………………………………………………………………………………………………………. 27

6.8 Training & Certification………………………………………………………………………………………………. 27

7

CONTACT DETAILS………………………………………………………………………………………………….. 28


4 | P a g e

1. ABOUT SCANSTAR NDT SERVICES

1.1. INTRODUCTION

Scanstar offers a wide range of NDT Services, Training & Certification, Special Services for more

than 8 Years to support Manufacturers and users of Industrial Equipment/ Materials – Principally in

Engineering, Manufacturing, Process and Technology Based Industries.

Scanstar is backed by a team of consultants who are recognized professionals in their specialized

fields.

Scanstar provides services in diverse industrial fields such as Power Generation, Petrochemical, Oil

& Gas, Automobile, Aerospace, Ship Building, Cement, Alternate Source of Energy Etc.,

Scanstar provides services on all stages, basic from Raw Material to Finished Products to attain

Quality.

Scanstar believes in developing MUTUALLY BENEFICIAL LONGTERM RELATIONSHIP WITH

CUSTOMERS through QUALITY OF SERVICES, CONTINUOUS DEVELOPMENT and PROMPT

RESPONSE

Scanstar reaffirms their commitment to improve the quality of life by continuously pursuing

Excellence, providing World-Class Services to their customers and by creating a brighter future and

a better life for their employees and their community.

1.2. VISION

To be one of the leading NDT Service providers by providing testing to all Construction, Mechanical,

Instrumentation, Commissioning, Power Generation, Oil, Gas, Petroleum, Chemical Plants,

Automotive, Aerospace, General Industrial Companies.

1.3. MISSION

To Provide Customer Satisfaction by High Quality, Timely Service, Continuous Interaction, Prompt

Response, safety for maintenance and construction of client’s critical assets. To reduce the liabilities

and preserve continuous operations that complies with client’s requirements and international

standards.

1.4. VALUES

As a company, and as individuals, we value integrity, honesty, openness, personal excellence,

constructive self-criticism, continual self-improvement, and mutual respect. We take on big

challenges, and pride ourselves on seeing them through.


5 | P a g e

1.5. NDT Service Provider in the field of

Power Generation Petroleum Oil & Gas Chemical Plants

Aerospace Automotive Ship Building General Industries

1.6. Certification

1.6.1. ISO 9001: 2008 Certificate


6 | P a g e

1.6.2. ASNT Level III Certificate


7 | P a g e

1.6.3. Small Scale Industries certificate


8 | P a g e

1.6.4. Service Tax Registration Certificate


9 | P a g e

1.6.5. Income tax PAN Certificate

1.6.6. Importer Exporter Code


10 | P a g e

1.7. SKILL & PERSONAL QUALITIES OF NDT TECHNICIAN

� Be able to participate in strenuous physical activity on elevated work platforms in adverse

weather conditions by following Industrial Safety Procedure.

� Excellent Problem Solving Skills.

� Good Communication Skills, be able to explain processes and findings to Customers.

� A thorough approach to Testing and Recording.

� We provide inspection services for regular control during production or for on-site

inspection, to discover repetitive production errors and avoid hazardous break down of

installed Wind Towers.

1.8. TRAINING METHODOLOGY


11 | P a g e

2. NDT Services Offered

2.1. Ultrasonic Flaw Detection

2.2. Ultrasonic Thickness Gauging

2.3. Eddy Current Testing

2.4. Magnetic Particle Testing

2.5. Liquid Penetrant Testing

2.6. Visual Inspection

2.7. Infrared & Thermography

2.8. Vibration Analysis


12 | P a g e

2.1. Ultrasonic Flaw Detection &


Ultrasonic inspection uses high frequency sound waves

to detect imperfections or changes in properties within

the materials. It can also be used to measure the

thickness of a wide range of metallic and non-metallic

materials where access from one side is available.

Ultrasonic Flaw Detection Applications

Mill

components

Rolls, Shafts, Drives, Press

columns.

Power

equipments

Turbine forgings, Generator

rotors, Pressure piping,

Weldments, Pressure Vessels,

Nuclear fuel elements and

other Reactor components.

Machinery

materials

Die blocks, Tool steels and Drill

pipe.

Railroad

parts

Axles, Wheels, Track and

Welded Rail.

Automotive

parts

Forgings, Ductile Castings and

Brazed or Welded components.

FRP Through Transmission

Technique

Equipments Available

Digital Ultrasonic Flaw Detectors

Modsonic Einstein II - 04 Nos.

Landmark - 01 No.

Doppler Anyscan 30 - 01 No.

Ultrasonic Thickness Gauges

Landmark UT 700 - 05 Nos.

Modsonic Edison 1M - 04 Nos.

Ultrasonic Thickness Gauging Applications

� Wall Thickness Measurements for Metals, Containers and Enclosures

� Thickness Inspection of Metal Coils

� Wall Thickness Measurements of Metal Pipes and Tubes

� Measurement of wall thickness of steam boiler tubes

� Wall Thickness of Turbine Blades

� Wall Thickness Measurement of Cast Engine Blocks and Cylinder Bores


13 | P a g e


In eddy current testing electrical currents are generated

in a conductive material by an induced magnetic field.

Distortions in the flow of the electric current (eddy

currents) caused by imperfections or changes in a

material’s conductive properties will cause changes in

the induced magnetic field. These changes, when

detected, indicate the presence of the imperfection or

change in the test material.

Applications

Tube Inspection Straight & “U” Tubes.

Material Sorting Hardness, Chemical

Composition, Case

Depth

Crack Detection Turbine blade, Bolt

Hole, Fasteners

Coating Thickness Non Metallic Coatings

on Metals & Metallic

Coating on Metals

Electrical Conductivity Measurement.


Tube Inspection & Material

Sorting

Technofour INSIS EC - 01 No.

Eddysun EEC35RFT – 01 No.

Crack Inspection

Foerster Defectometer 2.837 - 01 No


14 | P a g e


Magnetic Particle Inspection is used to identify Surface

and Near Surface Discontinuities in Ferromagnetic

Materials such as Steel and Iron.

Applications

Castings, Forgings, Rolled plate & Round, Extrusions,

Boiler de-aerator, Internal Inspections, Springs, Gears,

Studs, Bolts, Nuts, & Washers, Weldments, Valve &

Pump Bodies, Valve Stems, Vessel domes, Both Seamless

and Welded Pressure Vessels, Blades on high and low

pressure Steam Turbines and Diaphragms, Locomotive

wheels.


Electromagnetic Yoke,

Electromagnetic Prod,

Head Shot Equipment,

Digital Gauss meter

Methods Available

Wet Fluorescent, Wet Visible

Inspection & Dry Visible Inspection

2.5. Liquid Penetrant Testing

Liquid Penetrant is used to identify surface breaking

discontinuities in Metals & Non Metals.

Applications

Castings, Forgings & Extrusions, Aerospace components

made of many Different Alloys, Weldments, Plastics and

Glass, Machined parts, Leak tests, Paper mill Suction

Pressure Rolls, Retaining Bands on Generator Rotors,

Stellite overlay on Steam Turbine Blades, Pump Bodies,

Valve Bodies and Seats, Non-Magnetic impellers for

Ships and Hydro-Electric Power Plants


15 | P a g e

2.6. Visual Inspection

The oldest of all the methods, components are scanned

visually, sometimes with the aid of low or high power

lenses, fibrescopes, cameras and video equipment, to

determine surface condition.

Applications

Pitting, Cracking, Corrosion, Erosion, Weld, Condenser

tubes, Heat Exchangers and Tubes, Pipelines, Steam and

Power turbines, Pumps, Gearboxes, Compressors,

Boilers, Headers and Valves. Remote Visual Inspection

equipment can be used for condition monitoring,

allowing accurate assessment of defect length, width

and depth.


Videoscope, Boroscope

2.7. Vibration Analysis

A fundamental requirement in all vibration work,

whether it is in the design of machines which utilize

its energies or in the creation and maintenance of

smoothly running mechanical products, is the

ability to obtain an accurate description of the

vibration by measurement and analysis.

Applications

Investigation of Highly Stressed and High Speed

Machinery, Imparting controlled level of vibration

energy to Products & Sub-Assemblies,

Ascertainment of resistibility to Vibration

Environments, Location of problems in Rotating

Machines, Assisting in the Condition Monitoring

and Predictive Maintenance. Identifying Problems

in Reciprocating Machines.


16 | P a g e

2.8. Infrared & Thermography

Thermography enables the thermal profile of an item,

machine or building to be presented in a graphic, from

which allows a working temperature assessment to be

derived. From this, variations in the material or

component temperature are identified, enabling

working limits or corrective actions to be identified.


FLIR THERMOCAM

Temp Range -20 to 350⁰ C

Applications

� Pipeline inspection, leak detection, stress corrosion cracking areas.

� Environmental inspections, pollution dumping, thermal dumping of waste water.

� High Voltage Electrical inspections for Transmission lines.

� Electrical inspections in buildings, plants, facilities, and refineries.

� Thermal heat loss inspections for buildings, plants, facilities, refineries.

� Moisture contamination evaluations in buildings, plants facilities.

� Concrete integrity inspections.

� Concrete Water Heated floor inspections for leaks and temperature distribution.

� Flat roof leak detection for buildings, plants, facilities.

� Power generation generator inspections.

� Power Plant boiler flue gas leak detection.

� Substation Electrical inspections, transformers and capacitor evaluation.

� Over head urban and rural distribution electrical inspections.

� Electrical motor inspections, mechanical bearing inspections.

� Heat ventilation air conditioning equipment evaluation.

� Cold Storage cooling losses.

� Refinery process line insulation loss or leak detection.

� Furnace refractory (insulation) inspections.

� Design proto typing evaluation. Motor racing and tire contact diagnostics.

� Brake and engine systems evaluation for performance and cooling efficiencies.

� Printed circuit board evaluation and trouble shooting.


17 | P a g e

3. Scanstar also has several special services to offer such as

3.1) Residual Life Assessment (RLA)

3.2) Level III Services

3.3) Welding Inspection

3.4) Hardness Testing

3.5) Ultrasonic & MT Equipment Calibration

3.6) Welder Qualifications

3.1. Residual Life Assessment (RLA)

NDT is a powerful tool to collect data to be used for

calculating the Remaining Life of Industrial Components.

An RLA study would recommend the selective

replacement of components close to the end of the

service life in order to extend the useful life of the entire

plant and ensure safe operation.

Ultrasonic oxide scale measurement on boiler tubes,

wall thickness data and operating conditions, i.e.

temperature and pressure, supply the required input to

predict service life using constitutive equations.


18 | P a g e

3.2. Level III Services

Development and/or Review of Qualification

Examinations

Test and Inspection Procedures

Personnel Certification Programs and specialized

NDT techniques

Implementation of Inspection Programs

Level III Representation

On-site and In-house Training

Contract Review

Equipment Recommendations

Auditing

3.3. Welding Inspection

Welding Inspection per ASME Sec I, ASME Sec VII,

AWS D1.1, AWS D14.6, Mil STD 1689, NBIC and

other codes as required.

Assistance with qualification of welders and

procedures in accordance with ASME Sec IX and

AWS D1.1


19 | P a g e

3.4. Hardness Testing

Hardness is the resistance of a material to permanent

indentation.

The most common uses for hardness tests is to verify the

heat treatment of a part and to determine if a material

has the properties necessary for its intended use.


Landmark HL 200 – 01 No

3.5. Equipment Calibration

We do Calibration Check and provide Calibration Certificate for the following Equipments

Ultrasonic Flaw detectors

Ultrasonic Thickness Gauges

Electromagnetic Yoke

Electromagnetic Prods

Head Shot Equipment


20 | P a g e

4. Training

4.1) NDT Training & Certification Program

4.2) ASNT Level III Refresher Course

4.1. NDT Training & Certification Program

SCANSTAR NDT SERVICES provides high quality training

in various NDT methods confirming to

ASNT – SNT –TC –1A guidelines.

Our Course Content Covers

Introduction, Basic principles, Equipments, Methods,

Calibration, Evaluation (Practical), Application, Codes,

Standards & Specification.

Course Methods

Ultrasonic Testing

Eddy current Testing

Magnetic Particle Testing

Radiographic Testing

Penetrant Testing

Visual Testing

Infrared & Thermography Testing

4.2) ASNT LEVEL III Refresher Course

Scanstar NDT Services is organizing refresher courses for assisting the candidates in preparing for

the ASNT NDT Level III Examinations.

NDT Level III refresher training is offered by ASNT NDT Level III instructors to assist experienced NDT

personnel in preparing for the national ASNT Level III examinations.


21 | P a g e

Scanstar NDT Services offers a wide range of NDT Services & Special Services for

more than 8 Years.

5. OUR PARTIAL CLIENT LIST


22 | P a g e

6. SERVICES EXECUTED BY SCANSTAR NDT SERVICES

6.1. Ultrasonic Flaw Detection

Sr. No. CUSTOMER JOB YEAR

1 HYUNDAI MOTORS INDIA LIMITED UT OF WELDED JOINTS 2004

2 INTECH UT FOR SPROCKET 2004

3 AUTOKAST LIMITED UT of Castings 2005

4 MADURAI POWER CORPORATION PRIVATE

LIMITED UT OF Welds 2006

5 MAN TAKRAF (INDIA) PRIVATE LIMITED UT OF DRIVE TUMBLER SHAFT 2006

6 MAN TAKRAF (INDIA) PRIVATE LIMITED UT OF BRIDGE PART 2006

7 SAFEES QUALITY MANAGEMENT PRIVATE

LIMITED UT of Welds 2006

8 WINERGY UT FOR HOUSING 2006

9 MABEL ENGINEERING UT OF PLATES AND WELDS 2006

10 HYUNDAI MOTORS INDIA LIMITED UT FOR BEARING SEATING 2006

11 BAY FORGE LIMITED UT OF 65 mm SQUARE ROD 2006

12 WINERGY LTD UT OF GENERATOR CASTINGS 2007

13 HYUNDAI MOTORS INDIA LIMITED UT FOR SHAFT 2007

14 CAPARO ENGINEERING INDIA PRIVATE

LIMITED

UT OF SKD 11/D2-925 X 365 X

310 2008

15 SUVARNA FIBROTECH PRIVATE LIMITED

UT OF DELAMINATION OF

FIBRE GLASS WIND MILL

NACELLE COVER

2008

16 HYUNDAI MOTORS INDIA LIMITED UT OF INTERMEDIATE SHAFT 2008

17 HYUNDAI MOTORS INDIA LIMITED UT FOR PRESS SHOP PIPE TO

FLANGE 2008

18 RRB ENERGY LIMITED

UT FOR TORQUE ARM PRE ASSEMBLY,

PLATE F TORQUE ARM, LOCK FITTING, F -

BLADE, BACK PLATE F TORQUE

2008


23 | P a g e

19 RRB ENERGY LIMITED SG CAST IRON, WELDS, PLATES 2008

20 PPN POWER GENERATING COMPANY UT OF WELDS 2008

21 NPCIL, MADRAS ATOMIC POWER STATION UT OF PIPELINE WELD JOINTS 2009

22 IP RINGS ROTOR BLANK AND ROLLER

BAR 2009

23 SUZLON INFRA STRUCTURE SERVICE LIMITED UT OF TOWER 2009

24 NTPC RIHAND BOBR WAGONS UT OF 900 SET WHEEL & AXLE

ASSEMBLY 2009

25 RRB ENERGY LIMITED UT IN CASTING, WELDING &

FORGING 2010

26 HYUNDAI MOTORS INDIA LIMITED HEMMING MACHINE 2010

27 HYUNDAI MOTORS INDIA LIMITED UT OF INTERMEDIATE SHAFT 2010

28 GAMESA WIND TURBINES LTD THROUGH TRANSMISSION

TESTING OF FRP COVERS 2010



1 OCEAN SPARKLE LIMITED CHANNEL BUOY # 4 2008

2 PPN POWER GENERATING COMPANY PVT. LTD.

Power Plant

Components 2008

3 GUJARAT INDUSTRIES POWER COMPANY LTD.

2 X 125 MW CBFC

BOILER

2007, 2008,

2009

4

NUCLEAR POWER CORPORATION OF INDIA

LIMITED RAJASTHAN ATOMIC POWER STATION

Elbows, Reducers, Tees,

Bonds, Straight Pipes,

Nozzles 2008, 2009

5 CHENNAI PETROLEUM CORPORATION LIMITED



Nozzles 2008

6 ABAN POWER COMPANY LIMITED



Nozzles 2009


24 | P a g e



1 NPCIL, KAIGA GENERATING STATION ECT OF MODERATOR HX & FM

HX 2007

2 HINDALCO INDUSTRIES LIMITED ECT OF TG # 3 CONDENSER

TUBES 2007

3 VIJAYAWADA THERMAL POWER STATION ECT OF CONDENSER TUBES 2A

& 2B OF UNIT#II 2007

4 NTPC LTD, RIHAND SUPER THERMAL POWER

PLANT

ECT OF UNIT#II CONDENSER

TUBES 2007

5 IOCL, HALDIA REFINERY, WEST BENGAL ECT OF TG#I, II, III, IV SURFACE

CONDENSERS 2008

6 NPCIL, RAJASTHAN ATOMIC POWER

STATION - 2

ECT OF BLEED CONDENSER,

REFLUX COOLER, MODERATOR

COOLER & SHUTDOWN

COOLER

2008


TUBES 2008

8 NTPC LTD, RIHAND SUPER THERMAL POWER

PLANT

ECT OF UNIT#II CONDENSER

TUBES 2008

9 NTPC LTD, RGCCPP, KAYAMKULAM ECT OF CONDENSER TUBES 2008

10 TORRENT POWER, AHMEDABAD

ECT OF CONDENSER TUBES

2X30 MW "C" STATION TG # 15

& 16 & 110 MW AT "E"

STATION

2008

11 HWPK, RAJASTHAN ECT OF SHELL & TUBE TYPE OF

HEAT EXCHANGERS 2009

12 NPCIL, MADRAS ATOMIC POWER STATION ECT OF SHUTDOWN COOLER &

MODERATOR HX 2009


25 | P a g e

13 KORBA SUPER THERMAL POWER STATION,

CHATTISGARH


UNIT#2 (200MW) 2009

14 KORBA SUPER THERMAL POWER STATION,

CHATTISGARH


UNIT# 2009

15 NTPC FARIDABAD GAS POWER STATION,

FARIDABAD ECT OF CONDENSER TUBES 2009

16 NTPC LTD, KAWAS GAS POWER PROJECT, SURAT ECT OF CONDENSER TUBES TURBINE

#2C 2009

17 NPCIL,

RAJASTHAN ATOMIC POWER PROJECT - 6

ECT OF U-TUBES OF STEAM

GENERATORS - PSI 2009

18 NPCIL,

RAJASTHAN ATOMIC POWER STATION - 3&4

ECT OF MODERATOR HX ,

SHUTDOWN HX & FM

RECIRCULATION COOLER

2009

19 NPCIL, KAIGA GENERATING STATION ECT OF BLEED COOLER &

SHUTDOWN HX 2009


TUBES 2009

21 TORRENT POWER, AHMEDABAD ECT OF CONDENSER TUBES AT

"C" STATION 2009

22 SIMHADRI SUPER THERMAL POWER

PROJECT, VIZAG ECT OF CONDENSER TUBES 2010

23 NTPC LTD,

KAWAS GAS POWER PROJECT, SURAT ECT OF CONDENSER TUBES 2010

24 TORRENT POWER LTD, AHMEDABAD ECT OF CONDENSER TUBES 2010


26 | P a g e

6.4. Eddy Current Sorting


1 VETRIVEL FORGINGS ECT SORTING 2010

2 R.K. ENGINEERING INDUSTRIES HARDNESS TESTING 2006

3 INJECTOPLAST HARDNESS TESTING 2010

4 STANADYNE AMALGAMATIONS ECT OF SEAT BALL 2006, 2007

6.5. Eddy Current Conductivity


1 SRI BALAJI CASTINGS PRIVATE LIMITED ECT OF DISCONNECTOR HOUSING 2009, 2010



1 HYUNDAI MOTORS INDIA LIMITED Welded Joints 2004

2 AUTOKAST LIMITED Castings 2005

3

BHARATH TECHNOLOGIES AUTO COMPONENTS

LTD Housing Injector 2005

4 MADURAI POWER CORPORATION Welded Joints 2006

5 WINERGY LTD Generator Castings 2006

6 HYUNDAI MOTORS INDIA LIMITED Fan Pedestrial 2006

7

BHARATH TECHNOLOGIES AUTO COMPONENTS

LTD Housing Injector 2006

8 IGARASHI MOTORS INDIA LIMITED Shaft 2006

9 HYUNDAI MOTORS INDIA LIMITED Main Shaft 2007

10 STANADYNE AMALGAMATIONS Heat Treated Barrel 2007

11 SONA KOYO STEERING SYSTEMS INDIA LIMITED Automobile Components 2008

12 SUNDARAM FASTENERS LIMITED Fastners 2008

13 REGEN POWERTECH LTD Rotary Joints 2008

14 ABASI FLANGES Flanges 2008

15 STANADYNE AMALGAMATIONS PRIVATE LIMITED Crack Detection for ETG 2008

16 HYUNDAI MOTORS INDIA LIMITED

Intermediate shaft

welded 2008

17 RRB ENERGY LIMITED Welding

2008, 2009,

2010


27 | P a g e

18 RRB ENERGY LIMITED SG Cast Iron

2008, 2009,

2010

19 RANE (MADRAS) LIMITED Lx Docket 2009

20 SUNDARAM FASTENERS LIMITED Crack Detection 2009

21 STANADYNE AMALGAMATIONS PRIVATE LIMITED Body Nozzle Holder 2009

22 SUPER AUTO FORGE LIMITED

Cold Forged

Components 2009

23 HYUNDAI MOTORS INDIA LIMITED TF intermediate shaft

2008, 2009,

2010

24 HYUNDAI MOTORS INDIA LIMITED POV 2010

6.7. Penetrant Testing


1

NUCLEAR POWER CORPORATION OF INDIA LTD

MADRAS ATOMIC POWER STATION

Secondary system piping

weld joints 2009

2 PPN POWER GENERATING COMPANY Power Plant Components 2008

6.8. Training & Certification


1 Sundram Fastners Ltd, Mahindra City ASNT Level I & II Courses 2008

2 Sonokoya Steering Pvt Ltd, Chennai ASNT Level II Courses 2008

3 Super Auto Forge Pvt Ltd, Chennai ASNT Level II Courses 2009


28 | P a g e

7. CONTACT DETAILS

Name of the Company Scanstar NDT Services

Contact Person S. Daniel, CEO

Mobile: +91 – 9444376043

Alternate Contact Person S. Samuel, Manager

Mobile: +91 – 9940187582

Address Old No. 11a, New No 7,

1st

Main Road, Officers Colony,

Chennai – 600050.

Phone +91 – 44 - 43850772

Telefax +91 – 44 – 42690401

Email Id [email protected]

Website www.scanstarndt.co.in


29 | P a g e

SCANSTAR NDT SERVICES

New No 7,Old No. 11A,

1st

Main Road, Officers Colony, Chennai, Tamilnadu,

India — 600050.

Ph: +91—44—43850772,

Telefax: +91—44—42690409

Mobile: +919444376043

Email : [email protected]

Website : www.scanstarndt.co.in