Octavia Amundsen NavigationSystem

8/16/2019 Octavia Amundsen NavigationSystem

1/38

SIMPLY CLEVER

ŠkodaAuto

RADIO NAVIGATION SYSTEM AMUNDSEN


2/38


3/38

IntroductionYou have chosen a Škoda vehicle, which is fitted with an Amundsen radio navigatiocalled the navigation system) - we thank you for your confidence in us.

We recommend that you read these operating instructions carefully so that you can quicyour navigation system.

Should you have any questions or problems with your navigation system, please do not authorised Škoda Service Partner or importer.

National legal provisions, which deviate from the information contained in these operatedence over the information contained in the operating instructions.

We hope you enjoy using your navigation system and wish you pleasant motoring.

Your Škoda Auto


4/38

Contents2

Contents

General information . . . . . . . . . . . . . . . . .

Equipment overview . . . . . . . . . . . . . . . . . . . . . . . . . .

Important information . . . . . . . . . . . . . . . . . . . . . . . .

Range selector key SETUP . . . . . . . . .

Tone settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Radio set-ups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Traffic station set-ups . . . . . . . . . . . . . . . . . . . . . . . . .

Screen set-ups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Media set-ups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Navigation settings . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Range selector key RADIO . . . . . . . .

Radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Traffic information function TP . . . . . . . . . . . . . . .

MP3 and WMA data . . . . . . . . . . . . . . . . . . . . . . . . . .

External sources* . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Range selector key NAV(Navigation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Destination entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Destination memory . . . . . . . . . . . . . . . . . . . . . . . . . .

Route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

3

4

10

10

10

10

11

11

11

12

13

13

15

20

21

24

24

27

28

30

33


5/38

General information

Equipment overview


6/38


7/38


8/38

General information6

Enter code

– If a keypad appears after switching on with the command to enter thecode, the unit can be unlocked by entering the correct four-digit code

number. The number of the possible attempts is shown in the bottomscreen line.

– Press a digit from to on the digit block displayed on the screen.The digit is accepted in the entry line.

– After a four-digit order has been entered, the group of digits will turngrey (inactive) and no further digits can be accepted in the entry line.

– Press on the screen in order to delete the digits in the entry linefrom right to left and thereby correct your input, if necessary.

– If the correct code number is displayed in the entry line, press .

Code number

The code number can only be called up “online” via the Škoda system, as this guar-antees even more effective anti-theft protection. Please contact your authorized

Škoda Service Partner, if necessary.

Incorrect code number

If an incorrect code is confirmed after entry of the code, the procedure can berepeated twice. The number of possible attempts is shown in the bottom screenline.

If the code number is entered incorrectly for the third time, the unit will be blocked

NoteThe code is normally stored in the instmatically decoded (convenience codin

necessary.

0 9

Delete

OK


9/38

Operation when driving

The demands of today's road traffic require full concentration from all road users atall times.

WARNING

• Always concentrate fully on your driving. Inattention by the driver canlead to accidents and injuries.

• Do not allow yourself to be distracted by trying to use the unit, concen-trate instead on the traffic situation.

• Use the unit only if road, weather and traffic conditions permit and youwill not be distracted.

• The various volume settings must be selected in such a way that audiblesignals from the outside, such as e.g. a Martins horn from police cars and firebrigade, can be heard at all times.

NoteDepending on the country, some functions of the radio navigation system can nolonger be selected on the screen at certain speeds. This is not a malfunction, butcorresponds to the legal requirements of this particular country.

Special functions

Personalisation

Your vehicle can be equipped withalways assigned to the key, which tice, this means that each time yo

which is assigned to the key is car

Switching the system on an

– The system is switched on

The last active audio source befor

If the key is pulled out of the ignitioswitch off automatically. You can tswitched off, the system switches (vehicle battery protection againsoften as necessary.

General - operation


10/38

General information8

ated by touching the screen. Active fields, which call up a function or amenu, are called “function buttons” / .

The following information is displayed in the main menu:

the selected radio station (its frequency or designation);

selected waveband;

activation for the reception of traffic reports;

current menu.

“Pop-up window”

If you press the function key on the screen, a so-called “pop-up window” willopen where all possible set-up options are displayed.

Briefly press the desired set-up option. The pop-up window will disappear and thenewly selected set-up option is displayed in the function key.

“Check box”

Some functions can only be switched on or off.

There is a so-called “check box” in front of a function which can only be switchedon or off. A tick in the check box indicates that the function is switched on, anempty check box, indicates that it is switched off.

Briefly press the corresponding function key for switching on or off.

Input mask for free text input

In some of the menus you can ententering a new destination or whiinterest.

– Press to accept a characte

press in order to delete– When in the entry window, pre

block to accept it into the entry

– You can also delete or change tas well as insert additional cha

AD AF

A

B

C

E

AF

OK

Delete


11/38


12/38

Range selector key SETUP10

Range selector key SETUP

Tone settings

By pressing the button and pressing on the function key in theRADIO mode, you can select the following parameters using the menu control button :

• - , ,and - Volume when switching

on, volume of incoming traffic announcements, volume of navigation announce-ments and speed dependent volume adjustment;

• - Treble setting;• - Midtone setting;

• - Bass setting;

• - Setting of the volume ratio between the left and right side;

• - Setting of the volume ratio between the front and the rear;

• * - Setting the equalizer (linear, language, rock, classical, dance);

• * - setting of the surround tone.

GALA function

Your radio increases automatically its volume with the increasing vehicle speed. Ahigher setting value results in a stronger volume increase.

Note

• - Keypad display fo

• * - if your vehicle ischange is displayed when it is activate

• - Setting the brightness of t

• - Factory settings;

• - the information rethe SD card and the size of the memoryon the screen;

• - Removing the SD

Radio set-ups

Press the button in the RA

Switching the traffic announcem– If you wish to switch the recept

function key

Determining the station selectio

– By pressing on or from which the stations are to

SETUP Tone

10

Volume Maximum switch on volume Traffic announcements (TP)

Navigation volume Speed dependent vol Adjustment

TrebleMidtone

Bass

Balance

Fader

EQ Settings

Surround

Keypad display

A/C display time

Screen

Factory settings

SD card status

Remove SD card

SETUP

Traffic information

Station list M


13/38

– Press on the button , doing so always chooses thefrequency for the heard radio station which offers the best receptionat the present time.

– When pressing on the button , the unit attempts to hold a radiostation emitting regionally long enough until the reception quality isso bad, that there is a risk of a program loss.

Delete stored stations

– Press the function key and confirm the following safety interroga-tion in order to delete all radio stations stored in the memory list.

Traffic station set-ups

Press the range selector key and then the range selector key.

Switching the traffic announcements on or offA tick in the check box indicates that the traffic radio function is already switchedon.

Dynamic route

Opens a pop-up window where it is considered if the TMC traffic reports, receivedduring the route calculation, are to be entered.

– A light sensor, which is locpanel, is used for the automdepending on the light con

Day/Night– Press on the function key

window.

– Press the function key should also change the ma

– Press on the function key night and day design of the

Confirmation tone

– Press on the function key pop-up window.

– Press or to switch

operation on the screen on

Media set-ups

Press the button in the

Automatic

Fix

Delete memory

All

TRAFFIC

SETUP

Traffic information (TP)

Dynamic route

D

Auto

C

On Off

SETUP


14/38


15/38

Range selector key RADIO

Radio mode

Retrieve radio station

– Press the range selector ke

Alternatively, press on the RADIO and select or

Changing radio station

– By briefly pressing the funcprevious or following radio

– If the symbol “TP” is displaover to the radio stations w

– If the symbol “ ” is dchange over to the stored

Selecting a radio station from

– If you wish that all the pres

displayed, press on the funtion key . The list “sheard radio station.

– Select the desired radio sta

Change radio station in the

– Press the function key

BAT-20H1064

Fig. 5 Menu radio: Functionkey band

FM A

FM/List

Extr


16/38

Range selector key RADIO14

– Briefly press the set button to terminate the manual frequency selec-tion and to display once again the function keys.

Scan function

– In order to start the automatic play in the current frequency range,press the function key and then the function key . All radiostations with strong reception are automatically played for approxi-mately five seconds according to the sequence in the station list.

– Press on the function key to end the automatic play of thecurrently heard radio station.

Storing a radio station

Storing a radio station

– Press the function key and then the function key inorder to open the memory list.

– If you wish to store the displayed radio station in a memory space,press one of the displayed station keys to and hold itpressed for so long until a signal sounds. The currently heard radiostation is then stored on this station key.

Deleting a radio station from the memory list

– Press the button in theRADIO mode and then the function key

NoteIt is alternatively possible to store radiobutton .

Calling up a radio stationExtras Scan

Scan

Extras Memory

1 ... 24 ...

SETUP

A10


17/38


18/38

Range selector key TRAFFIC16

Range selector key TRAFFIC

Displaying TMC traffic reports

TMC traffic reports are used during route guidance, depending on theset-up for the automatic optimization of the route, to report possibletraffic problems.

– Press the range selector key to display the current trafficreports in a list.

– Press on the display of a traffic report to show it in a detailed display.– You can browse through all the traffic information received in the

detailed display, in sequence by using the function keys.

Traffic problems are illustrated in the detailed display and in the map by a corre-sponding symbol. The direction, in which the traffic problem is found in the map, isdisplayed in colour. A traffic problem which is located on the route (in direction of

travel) is marked in red, a traffic problem in the opposite direction is marked in grey.

Note• The unit has a continuous background of TMC traffic reports providing a TMCstation at the current location can be received. The station you are listening to doesnot have to be a TMC station.

• TMC traffic reports can only be evaluated and stored by the unit if the nagi-

TRAFFIC


19/38

Range selector key MEDIA

General information for CD operation

Audio-CDs (CD-A) and MP3-CDs can be played in the internal drive.

CD not legible

If you insert a CD which cannot be read by the unit, a pop-up window is displayedwith a note. Press on the function key , the CD is driven to the initial position.

If the CD is not taken out within 10 seconds, it is drawn in again for safety reasons.

WARNING

• The CD player is a 1st class laser product. There is a definite risk of injuryfrom invisible laser beams if it is opened.

• The CD player contains no parts that have to be serviced or repaired.Please contact your specialist garage if a mechanical defect occurs or the CDplayer has to be repaired.

Caution• Inserting a second CD while a CD is being ejected can destroy the CD drive inthe unit. Please note that the CD ejection lasts a few seconds after pressing theEject button . During this time the lock in front of the CD case is open. It isessential that you wait until the CD has been fully ejected before you try to insert anew CD.

Note• If the function key is inactinserted Audio CD is not readable

• It is possible that CDs protecteare not returned at all or only in ce

• Please observe the following i

• Please comply with the nation

Main menu MEDIA

Main menu MEDIA - Overv

OK

CD


20/38


21/38

– You can select the function key using the menucontrol button .

– Press against the spring resistance of the inserted memory card, the

memory card “skips” back into the Eject position.– After removing the SD card, confirm with on the screen.

Memory card empty or data not readable

If a memory card is inserted, on which no audio data has been stored, it will not beswitched over into the memory card mode after the loading procedure.

Requirements of the memory card

• Memory cards measuring 32 mm x 24 mm x 2.1 mm or 1.4 mm can be insertedinto the memory card case.

• SD (Secure Digital Memory Cards) and MMC (Multimedia Cards) memory cardswith a capacity up to 4 GB.

• SDHC (Secure Digital High-Capacity Memory Cards) memory cards with acapacity up to 32 GB.

• Due to the differing demands on quality of the card manufacturer, it is possiblethat some of the data on the memory cards cannot be played or their play isrestricted.

Audio menu

Opening the selection menu

– When in the Audio menu, ptitle list of the currently pla

track is shown as highlight– If one of the buttons of the

of the folder or the data ca

Changing track or selecting

Press the range selector key Select track

– Briefly press the arrow keymenu.

Fast forward/reverse

– Hold the arrow key on the – If you have reached the de

Audio CD

– Press on the function key the currently played audio

Remove SD card

A10

OK

M


22/38


23/38

NoteFor the correct display of the specific characters in Czech in ID3 day (name of theartist, the album and the track), the text must correspond to the standard ID3°V2

and the UTF coding.

Playing sequence of MP3 data, WMA data and folders

The unit plays the MP3 data storedThe illustration shows an example(Tracks), folder (Folder) andMP3 data from all folders and sub

External sources*

External sources - Overvie


24/38


25/38

CautionThe AUX socket must only be used for audio sources!

Note• If an AUX socket is also located in the storage compartment under the armrestin your vehicle, this socket is without function when combined with the navigationsystem Amundsen, please use the AUX socket directly on the unit.

• If an external audio source is connected via AUX, which is equipped with anadapter for external power supply, it can occur that the audio signal is interrupted.This depends on the quality of the adapter which is used.

• The loudspeakers in the vehicle are matched to a power output of the radio of30°W.


26/38


27/38

R l t k NAV (N i ti )26


28/38

Range selector key NAV (Navigation)26

• - activates the storage of the navigation data from the navigation CDonto the memory card.

Note• Copying a navigation CD can last up to one hour, during the copying the navi-gation functions (route guidance, map display) cannot be used, the mode TRAFFIC(traffic report) as well as the MP3 play function of the SD card are not available. Inthe menus Radio and Media, the symbol of the SD card is displayed on the top leftduring the copying.

• Do not remove the SD card from the unit during the copying of the data fromthe navigation CD onto the SD card.

Main menu Navigation

– Press the range selector key gation will be displayed.

– If the main menuNavigation isrange selector key .

Function keys in the main menu Navig

Address - serves as address entry vaddress.

Destination memory - serves for

Last destins. - serves for opening

Filling stations - serves for openin

Parking places - serves for opening

Install data

BAT-20H1083

Fig. 14 Main menu Naviga-tion

N

NAV


29/38

Destination entry

Selecting a destination address

Press on the function key Address while in the main menu Naviga- tion.

Selecting a destination address

– Open the input masks (country, village, street, house number) forselecting the destination address. A destination address must always

be selected in the displayed sequence, first of all the country, then thetown and so on.

– If the information is sufficent for route guidance, the function keywill be active.

Selecting a stored destination

Starting a route guidance to a stored “Home address”

– Press on the function key while in the main menu Navi- gation. If a home address has been stored, the unit will change to themap display and the route guidance will start automatically.

Start route guidance to one of the stored destinations

Select filling station or par

– Press the function key Fthe main menu Navigation

parking places is displayed

– Press one of the displayedmap display and the route automatically.

– In order to display the detapress the function key

– Start a route guidance by p

Selecting a point of interes

Determining the search area

– Press the function key PNavigation.

– In order to determine the sa point of interest, either ccentre .

Selecting a point of interest

Finish

Home addr.

Det

Town


30/38


31/38

– If you press the function key , the detailed information for thedestination is displayed. You can modify the entry here.

– If you wish to change the destination name, select the menu point

.– A route guidance to the displayed destination is started with the func-

tion key .

– If you press the function key , the destination is deleted.

Store additional window and “Flag dtns.”

Display additional window

– The additional window op

– If the route guidance is not

details for the current posi– If the route guidance is act

destination opens.

Store flag dtns.

– If you press the function ke

current position is stored a– Only one destination can b

“Flag dtns.”. If the “Flag dtnrenewed pressing of the fustored “Flag dtns.”, you mu

Rename flag dtns.

– Press the function key Dmenu Navigation.

– Select “Flag dtns.” in the lis

– Press the function key input mask opens in which

Details

Name

Start

Delete

BAT-20H1084

Fig. 16 Additional window:Display of the details for thecurrent position

Det


32/38


33/38

– Press the button and then the function keywhile in the main menu Navigation.

– Press on the function key .

– You can determine which types of destinations should be provided ornot by using the function keys ,and . These types of destinations will, however,be used for the route calculation if there is no other logical route to thedestination (e.g an island is to be used without using a ferry).

Determining the parameters for the route calculation

• Fast: It calculates the fastest route to your destination, even if a detour is neces-sary.

• Short: Longer driving time in favour of a shorter route is acceptable. Pleasenote that the setting “Short route” during route guidance can sometimes lead tounexpected results.

• Economical: The aim of the calculation is a balance between minimal drivingtime and driving distance.

Route guidance

Select the destination and staover to the map display.

– You can change the scale ocontrol button .

– The last navigation announcontrol button .

– You can change between tdisplay by pressing the ran

The route to be driven is highlightshows the current vehicle positionnation and the symbol shows t

Stretches of the road ahead can al

SETUP Route options

Route criteria

Dynamic route Avoid motorways

Avoid toll roads/ferry

A10

A10


34/38


35/38

Index34


36/38

Index34

SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

TRAFFIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Route options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

SScan

Automatic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Automatic play audio mode . . . . . . . . . . . . . . . . 20

Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Settings

Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Set-ups

Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Traffic station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Speed dependent Volume adjustment

GALA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Station name

RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Switching the system off . . . . . . . . . . . . . . . . . . . . . . . 7

TP (Traffic Program)

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Traffic report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

WWarranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4


37/38

Škoda Auto pursues a policy of constant product and model development. We trustthat you will understand that changes to models in terms of shape, equipment andengineering, may be introduced at any time. The information about scope ofdelivery, appearance, performances, dimensions, weight, fuel consumption,standards and functions of the vehicle is only correct at the time of publication.Certain items of equipment might only be installed later on (information given bythe local authorised Škoda Service Partner) and only envisaged for particularmarkets. It is therefore not possible for legal claims to be made based on the data,illustrations and descriptions contained in this Owner's Manual.

Reprinting, reproduction or translation, either in whole or in part, is not permittedwithout the written consent of Škoda Auto.

Škoda Auto expressly reserves all rights relating to copyright laws.We reserve the right to make changes to this document.

Issued by: ŠKODA AUTO a.s.

© ŠKODA AUTO a.s. 2009


38/38

www.skoda-auto.com

Navigace AmundsenOctavia, Superb, Yeti anglicky 05.09S00.5610.66.203T0 012 149 AR

Octavia Amundsen NavigationSystem

Documents

Transcript of Octavia Amundsen NavigationSystem