NOBI Technical Hoses B.V. · Voldoet aan de ASME B30.27 2009 eisen. 1/3 van het gewicht van...

1

Click here to load reader

Transcript of NOBI Technical Hoses B.V. · Voldoet aan de ASME B30.27 2009 eisen. 1/3 van het gewicht van...

Page 1: NOBI Technical Hoses B.V. · Voldoet aan de ASME B30.27 2009 eisen. 1/3 van het gewicht van conventionele rubberen slangen. Gebruiksvriendelijk. Goede weers- en verouderingsbestendigheid.

NOBI Technical Hoses B.V.PO 31017 | NL-6370 AA Landgraaf, Nederland

T: +31-45-2053207 | F: +31-45-8512926

E: [email protected] | www.nobi-nth.nl

NL Platoprolbare giekslang voor het storten van beton. Door de dunne wand is de slang makkelijk in gebruik

bij o.a. het storten van tussenwanden of bekistingen. Gemaakt van polyether-polyurethaan waardoor de

slang slijtvast en waterbestendig is. Mono-geëxtrudeerd voor optimale hechting en minimale lengterek.

DE Betonflachschlauch als Endschlauch am Mast. Dunwandig wodurch sehr leicht in der Handhabung

beim Füllen von z.B. Wandschalungen. Hergestellt aus polyether-polyurethan und somit hoch abriebfest.

Mono-extrudierte Ausführung für optimale Haftung des Materials und geringe Längsdehnung.

UK Flat concrete boom hose. Suitable for better flow control and lower placement rates. Ideal for ICF forms

as well as tall walls, and columns where space is minimal. Made from polyether based polyurethane with

excellent wear & tear chararteristics. With strong bond between the cover and the lining. Min. elongation.

Materiaal/Material/Material TPU

Kleur/Farbe/ Colour Oranje/Orang/Orange

Inlagen/Einlagen/Inserts Textiel - Synthetisch - Textile

1. Koppeling/Kupplung/Coupling 4,5" (127mm) Vict.

ID mm S mm Kg/m WP BP L / m

111,0+2,0 4,2 1,73 85 bar 172 bar 3-4-5m

Voordelen:

Vorteile:

Benefits:

Bright colour for visibility and safety.

Schnell und einfach ein zu lagern.

Meets/exceeds ASME requirements.

1/3 the weight of a common rubber hose.

Operator friendly.

Superior resistance to weather and ageing.

D A T A S H E E T - MORTAR FLAT PU

Tolerantie / Toleranz / Tolerance: +/- 5%

Tensile strength

80 Tons

Voldoet aan de ASME B30.27 2009 eisen.

1/3 van het gewicht van conventionele rubberen slangen.

Gebruiksvriendelijk.

Goede weers- en verouderingsbestendigheid.

Snel op te bergen.

Gemäss den ASME B30.27 2008 Sicherheitsrichtlinien.

Ca. 2/3 leichter wie herkömmlichen Gu.Schlauch.

Leicht in der Handhabung.

Gute Witterungsbeständigkeit.

Opvallende signaalkleur.

Auffalende Sicherheitsfarbe.

A.m. specifications are at +20°C and are indicative. Supplied product can differ due to changes by the producer without prior notice and there for is

the a.m. for information purpose only.