Media Release

Schaffhausen, March 27, 2012 Mostra Convegno, Hall 9, K29/L22

Global Communications Georg Fischer Piping Systems Ltd. 8201 Schaffhausen Schwitzerland www.piping.georgfischer.com Anna Maria Marini Telefono +39 02 92 186 205 Telefax +39 02 92 186 247 annamaria.marini@georgfischer.com Katharina Aeschlimann Media Relations Manager Tel +41 (0) 52 631 3374 katharina.aeschlimann@georgfischer.com

Product overview 1/5

Product overview ALUPEX Express ALUPEX Express stands up to the most rigorous

demands on building sites. The new fitting is supplied

in a single pre-assembled component and requires no

prepping. Thanks to the new profile of the fitting,

calibrating the pipe is no longer necessary. Also

integrated in the fitting are windows that indicate the

insertion depth of the pipe. The fitter does not have to read out the dimensions from

the product specs and mark the pipe. These innovations reduce assembly time by up

to 50%.

iKLIMA – Comfort and well-being The most comfort with the best energy

savings. Easy and individual

temperature control guarantees your

well-being in every season. iKLIMA

satisfies the diverse requirements in

industrial and residential buildings.

The following application areas are

covered by iKLIMA: Radiator connections, floor heating or cooling systems.

For the safe transport of liquids and gases 2/5

Benefits:

- Air purity - Energy saving

- Physiological compatibility - System integration

- Structural integration - Safety

iFIT – The push-fit system for multi-storey distribution For water distribution to all parts of the building,

the iFIT push-fit system in small dimensions

complements the INSTAFLEX system. No tools

are required to make pipe joints, which means

installation is fast and easy. The modular

component system also means 50% fewer parts

in the product range and more combination options compared to conventional

installation systems. With the iFIT system, installers are free to choose the pipe

material, depending on the application. For plumbing installations, for example, there

is a choice of the flexible polybutene pipe for fine distribution of drinking water and

the dimensionally stable multi-layer composite pipe for basement distribution and

riser pipes.

INSTAFLEX – The complete all-plastic system

With a modern product range for building services, GF Piping

Systems once again demonstrates its leading position as a global

supplier of piping systems with comprehensive solutions from

one source. During the trade fair, GF Piping Systems visitors are

given a closer look at the all-plastic INSTAFLEX system.

INSTAFLEX is a complete all-plastic system (d16 mm – d225 mm)

for hot and cold water installations – from basement distribution and riser pipes to

fine distribution in all corners of the house. The polybutene system features easy and

practical jointing technologies, temperature resistance and a positive energy balance.

Rational prefabrication as well as faster and easier handling are additional features of

this exceptional system.

For the safe transport of liquids and gases 3/5

ELGEF® Plus – The unique modular electrofusion system with integrated screws

ELGEF Plus is the electrofusion system

for pressure pipelines from GF Piping

Systems. Its strength lies in the modular

design, which provides endless

opportunities for combining fittings.

Individual solutions are realized rapidly

and flexibly on site or on the workbench.

Besides the electrofusion couplings, the

system includes a large selection of long branches, fusion devices and accessories.

ELGEF Plus is the only electrofusion system for polyethylene pipelines with

integrated screws, ensuring the highest level of safety and reliability.

PRIMOFIT® PRIMOFIT fittings with mechanical

fastening are made of malleable cast iron

with a selection of sealing elements for

water, gas and othermedia. PRIMOFIT is

ideal for joining different materials such as

steel and PE. It’s the optimal solution for

renovations, repairs and new buildings.

Malleable cast iron connectors – Quality for over 200 years

The GF malleable cast iron fittings

have been successful for over a

century. Adherence to manufacturing

norms such as ISO 49 and UNI EN

10242 ensures proper conservation

with special synthetic resins, so that

threads in the galvanized and black

versions are protected against corrosion. The large selection of fittings from GF

Piping Systems and the thorough testing to which they are subjected allow use in

numerous industrial and commercial applications.

For the safe transport of liquids and gases 4/5

GF JRG valves for drinking water hygiene GF Piping Systems also focuses on clean drinking

water at Mostra Convegno 2012. Many different

specifications need to be complied with in the many

application areas (e.g. in hotels, in industrial

buildings or in hospitals). End users must be able to

depend on a steady supply of water, gas or

compressed air and, equally so, on consistent hygiene and good operating conditions.

Optimal drinking water hygiene is guaranteed by means of zero static valves, stable

systems and materials that do not release microorganisms or nutrients for

microorganisms to feed on into the system. The LegioStop shut-off valve GF Piping

Systems in combination with zero-static connections for Sanipex Classic and

Sanipex MT pipelines satisfy these requirements. GF Piping Sysems presents in

Milano a complete drinking water system that is free of dead legs, prevents

incrustation in pipelines and valves and hinders biofilm growth (bacteria, legionella)

and corrosion. With the new combination possibilities of Sanipex and iFIT products,

Georg Fischer once again underscores their competence in comprehensive system

solutions.

JRG LegioStop – The hygienic valve generation

The GF JRG shut-off valve gives pathogens in

installation systems and valves no chance. The

angle-seat LegioStop valve seals at the spindle,

keeping the mechanical parts dry. In this way, dead

legs are eliminated and legionella are prevented from

forming. LegioStop is a key element in ensuring top

quality drinking water, as the valve is completely free

of dead legs and cavities and complies with all hygienic requirements.

For the safe transport of liquids and gases 5/5

JRG LegioTherm – The system for temperature monitoring

The JRG LegioTherm system is used

wherever hot water circulation is

combined with a regulated thermal

disinfection. It offers protection against

biofilm growth and microbiological

contamination. With the help of

temperature monitoring, JRG LegioTherm guarantees hot water comfort, while also

warning operators of deviations. Since the central control unit can be linked to a PC

network, using JRG LegioTherm reduces operating and maintenance efforts. JRG Sanipex Piping Systems

The jointing technique of Sanipex drinking

water installation systems (JRG Sanipex

MT and JRG Sanipex Classic) provides

more safety across the whole pipe cross-

section, preventing cavities. In addition,

Sanipex systems exhibit low pressure loss

and hardly any flow noise. Sanipex is easy and flexible to install even in places

where space is limited. Thanks to the removable jointing technique, installations are

easily modified or expanded at any time.

Georg Fischer – Adding Quality to People’s Lives GF Piping Systems is one of three companies within the Georg Fischer group and a leading supplier of plastic and metal pipe systems with a global market presence. Our portfolio offers connection technology, fittings, fixtures, sensors and pipes for the treatment and distribution of water as well as the safe transport of industrial fluids and gases. GF Piping Systems supplies leading innovative technical solutions for domestic engineering applications, the chemical process industry, food & beverage, life sciences, the microelectronics, shipbuilding, energy, water and gas supply industries as well as potable water treatment. Our distributors in more than 25 countries and representatives in a further 80 countries guarantee customer service around the clock. Production facilities in Europe, Asia and the US are customer focussed and comply with all local requirements. Georg Fischer’s registered offices have been located in Schaffhausen, Switzerland, since the company was founded in 1802. Key figures - GF Piping Systems 2011 More than 5’040 employees worldwide (as of 1 March 2012) 1174 million CHF turnover 137 million CHF EBIT (earnings before interest and taxes) Further information is available from www.piping.georgfischer.com