GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used...

30
www.trimble.com www.trimble.com UL 633N User Guide Bedienungsanleitung Manuel de l´utilisateur Guida per l´uso Gúia del usuario Gebruikershandleiding Operatörshandbok Brugermanual Guia do Usuário Bruksanvisning Käyttäjän opas Руководство пользователя © 2017 , Trimble Inc.. All rights reserved. PN 112644-00 Rev. B (07/17) Trimble - Spectra Precision Division 5475 Kellenburger Road Dayton, Ohio 45424 U.S.A. +1-937-245-5600 Phone Instrukcja obsługi UL 633N

Transcript of GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used...

Page 1: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

GL400 Series

www.trimble.com

Trimble Construction Division5475 Kellenburger RoadDayton, Ohio 45424USA

+1-937-245-5600 Phone

www.trimble.com

User GuideBedienungsanleitung

Manuel de l´utilisateurGuida per l´uso

Gúia del usuarioGebruikershandleiding

OperatörshandbokBrugermanual

Guia do UsuárioBruksanvisningKäyttäjän opas

取扱説明書

© 2007, Trimble Navigation Limited. All rights reserved.

GL400 Series

www.trimble.com

Trimble Construction Division5475 Kellenburger RoadDayton, Ohio 45424USA

+1-937-245-5600 Phone

www.trimble.com

User GuideBedienungsanleitung

Manuel de l´utilisateurGuida per l´uso

Gúia del usuarioGebruikershandleiding

OperatörshandbokBrugermanual

Guia do UsuárioBruksanvisningKäyttäjän opas

取扱説明書

© 2007, Trimble Navigation Limited. All rights reserved.

UL 633N GL400 Series

www.trimble.com

Trimble Construction Division5475 Kellenburger RoadDayton, Ohio 45424USA

+1-937-245-5600 Phone

www.trimble.com

User GuideBedienungsanleitung

Manuel de l´utilisateurGuida per l´uso

Gúia del usuarioGebruikershandleiding

OperatörshandbokBrugermanual

Guia do UsuárioBruksanvisningKäyttäjän opas

取扱説明書

© 2007, Trimble Navigation Limited. All rights reserved.

Руководство пользователя

Russ_Titel.indd 1 06.05.2008 08:38:53

© 2017 , Trimble Inc.. All rights reserved.PN 112644-00 Rev. B (07/17)

Trimble - Spectra Precision Division5475 Kellenburger RoadDayton, Ohio 45424 U.S.A.

+1-937-245-5600 Phone

Instrukcja obsługiU

L 63

3N

Page 2: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

112644-00 Rev. B (07/17)

d f

h

g

i

k

i

c

e

b

a

j

l

Service and Customer Advice

North AmericaTrimble - Spectra Precision Division5475 Kellenburger RoadDayton, Ohio 45424 U.S.A.888-527-3771 (Toll Free)+1-937-245-5600 Phone+1-937-482-0030 Faxwww.trimble.comwww.spectralasers.comwww.spectraprecision.com

EuropeTrimble Kaiserslautern GmbHAm Sportplatz 567661 KaiserslauternGERMANY+49-6301-711414 Phone+49-6301-32213 Fax

Latin AmericaTrimble Navigation Limited6505 Blue Lagoon DriveSuite 120Miami, FL 33126U.S.A.+1-305-263-9033 Phone+1-305-263-8975 Fax

Africa & Middle EastTrimble Export Middle-EastP.O. Box 17760Jebel Ali Free Zone, DubaiUAE+971-4-881-3005 Phone+971-4-881-3007 Fax

Asia-PacificTrimble NavigationAustralia PTY LimitedLevel 1/120 Wickham StreetFortitude Valley, QLD 4006AUSTRALIA+61-7-3216-0044 Phone+61-7-3216-0088 Fax

ChinaTrimble BeijingRoom 2805-07, Tengda Plaza,No. 168 Xiwai StreetHaidian DistrictBeijing, China 100044+86 10 8857 7575 Phone+86 10 8857 7161 Faxwww.trimble.com.cn

Page 3: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

1

TABLE OF CONTENTS

1 INTRODUCTION 32 FOR YOUR SAFETY 33 COMPONENTS 34 HOW TO USE THE LASER SYSTEM 4 4.1 Powering the Laser 4 4.1.1 Batteries 4 4.1.2 Recharging the batteries 4 4.2 RC603N Radio/IR Remote Control 4 4.2.1 Powering the RC603N 4 4.2.2 Turning On/Off the RC603N 4 4.3 ST802/ST805 Signal Transporter 5 4.3.1 Powering the ST802/ST805 5 4.3.2 Turning On/Off the ST802/ST805 55 LASER SETUP 5 5.1 Turning On/Off the Laser 5 5.2 Features and functions 6 5.2.1 Standard Display 6 5.3 Standard Features 6 5.3.1 X-Y-Z-grade entering - Digit Select mode (Default) 6 5.3.2 X-Y-Z-grade - Step and Go mode 7 5.3.3 Rotation Mode 7 5.3.4 Pointing Mode 7 5.3.5 Scan Mode 8 5.3.6 Manual Mode 86 SPECIAL MENU FEATURES 8 6.1 Menu Functions (radio controlled) 8 6.2 Menu Functions (IR controlled) 8 6.3 Automatic PlaneLok Mode 9 6.4 Automatic Grade Match 10 6.5 Manual Grade Match 11 6.6 Automatic Axis Alignment 11 6.6.1 Automatic Axis Alignment 11 6.6.2 View Align Angles 12 6.6.3 Edit Align Angles 12 6.7 Mask Mode 12 6.8 Spot Search 12 6.9 Activating/Deactivating Standby mode 13 6.10 Start Reference Check 13

GB

Page 4: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

2

6.11 Setting Menu 13 6.12 Info 13 6.13 Service 14 6.14 RC603N Service Menu 14 6.14.1 RF IR Options 14 6.14.2 RF Connectivity 147 SPECIAL FEATURES - VERTICAL SETUP 15 7.1 Z-Axis Automatic Spot Align 15 7.2 Z-axis Automatic Spot Lok 15 7.3 Z-axis Automatic Spot Match 16 7.4 Line Scan 16 7.5 Beam Plunge 168 SETTING 17 8.1 Pairing 17 8.2 Pairing the laser with remote control 17 8.3 Pairing the laser with receiver HL760 17 8.4 Pairing the laser with the Signal Transporter (ST802/ST805) 18 8.5 Grade Entry 18 8.6 Grade Display 18 8.7 Sensitivity Selection 19 8.8 HI-alert selection 19 8.9 User Name 19 8.10 Set Password 19 8.11 Password On/Off 20 8.12 Radio (RF-Channel) 20 8.13 Select Language 20 8.14 Position Info 209 CALIBRATION 21 9.1 Checking Calibration of the Y- and X-Axes 21 9.2 Checking Calibration of the Z-(vertical) Axis 2110 TROUBLESHOOTING 2211 SF601 SPOT FINDER USER GUIDE 2312 PROTECTING THE UNIT 2613 CLEANING AND MAINTENANCE 2614 PROTECTING THE ENVIRONMENT 2615 WARRANTY 2616 TECHNICAL DATA 27 16.1 UL633N 27 16.2 RC603N 27 16.3 SF601 2717 DECLARATION OF CONFORMATY 2718 ELECTROMAGNETICAL COMPATIBILITY 28

Page 5: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

3

1 INTRODUCTION

Thank you for choosing one of the Spectra Precision Lasers from the Trimble family of precision lasers.The universal laser is an easy-to-use tool that offers accurate horizontal, vertical and sloped laser reference up to 1300 ft (400 m) away using a receiver. The plumb beam can be detected automatically and manually using the additional SpotFinder.

2 FOR YOUR SAFETY

For hazardless and safe operation, read all the user guide instructions.

• Useofthisproductbypeopleotherthanthosetrainedonthisproductmayresultinexposuretohazardouslaser light.

• Donotremovewarninglabelsfromtheunit.• TheUL633NisClass3A/3R(IEC60825-1:2014).• Neverlookintothelaserbeamordirectittotheeyesofotherpeople.• Alwaysoperatetheunitinawaythatpreventsthebeamfromgettingintopeople‘seyes.• Ifinitialserviceisrequired,whichresultsintheremovaloftheouterprotectivecover,removalmustonlybe

performed by factory-trained personnel.Caution:Useofotherthanthedescribeduserandcalibrationtoolsorotherproceduresmayresultinexposuretohazardouslaserlight.

Caution:UsingdifferentthandescribedattheUL633Nuserguide,mayresultinunsafeoperation.

3 COMPONENTS

a Keypad/LCD-Display b Handle c Rotor with fan beam lens d Sunshade e Axes-Alignment-Marks f Sighting Guides/Scope Mounts g Battery door h Rubber Cover/Recharge Jack i 5/8” x 11 Tripod Mounts j Rubber Feet k Turnable Legs l Plus and Minus Battery Diagrams

Page 6: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

4

4 HOW TO USE THE LASER SYSTEM

4.1 POWERING THE LASER

4.1.1 BatteriesWARNING

Ni-MHbatteriesmaycontainsmallamountsofharmfulsubstances.Besuretochargethebatterybeforeusingitforthefirsttime,andafternotusingitforanextendedlengthoftime.Chargeonlywithspecifiedchargersaccordingtodevicemanufacturer‘sinstructions.Donotopenthebattery,disposeofinfireorshortcircuit;itmayignite,explode,leakorgethotcausingpersonalinjury.Disposeinaccordancewithallapplicablefederal,state,andlocalregulations.Keepthebatteryawayfromchildren.Ifswallowed,donotinducevomiting.Seekmedical attention immediately

4.1.2 Recharging the BatteriesThelasermightbeshippedwitharechargeableNi-MHbatterypack.Note: TheapproximatechargeofthebatteriesisshownatthelefttopsideoftheLCD.

Thechargerrequiresapprox.10hourstochargeemptyrechargeablebatteries.

Forcharging,connecttheplugofthechargertotherechargejackofthebatterypack.

Neworlong-timeout-of-userechargeablebatteriesreachtheirbestperformanceafterbeingchargedandrechargedfivetimes.ForIndoorapplicationsthechargercan be used as a power supply for the laser.

Alkalinebatteriescanbeusedasabackup.Insert4D-cellbatteriesnotingtheplus(+)andminus(-)diagramsinside the battery housing.

The batteries should only be charged when the laser is between 50° F and 104° F (10°C to 40°C). Charging at a higher temperature may damage the batteries. Charging at a lower temperature may increase the charge time and decrease the charge capacity, resulting in loss of performance and shortened life expectancy.

4.2 RC603N Radio/IR Remote Control

4.2.1 Powering the RC603N1. Open the battery door using a coin or similar pry device to release thebatterydoortabontheRC603N.RC603Nwillbeshippedwithalkalinebatteries.Rechargeablebatteriescanbeusedoptionalbutneedtobechargedexternally

2.InserttwoAAbatteriesnotingtheplus(+)andminus(-)diagramsinside the battery housing.

3.Close the battery door.Pushdownuntil it “clicks” into the lockedposition.

4.2.2 Turning On/Off the RC603NTheradio/IRremotecontrolisahand-helddevicethatallowsyoutosendoperationalcommandstothelaserfrom a remote location.

Pressthepowerbuttontoturnontheradioremotecontrol.Thesymbol“ ”andadditionalverticalbarsappearin the right corner of the remote’s top display line indicating the radio connection status between the laser and theremotecontrol.IftheRC603NisoutsidetheradiooperatingrangetheremoteswitchesautomaticallyintotheIRconnectioncapability.

Note:Whentheremotecontrolisinitiallyturnedon,thestandarddisplay(modelnumberandsoftwareversion)appearforthefirst3seconds,thentheaxessymbolsandlast-enteredgradeforeachaxisappearintheLCD.

Witheverybuttonpress,theLCDbacklightisactivatedandturnsoffautomaticallyifnobuttonispressedfor8seconds.

To turn off the radio remote control, press the power button for two secounds.

Note:5minutesafterthelastbuttonpress,theremotecontrolturnsoffautomatically.

Page 7: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

5

4.3 ST802/ST805 SIGNAL TRANSPORTER4.3.1 POWERING THE ST802/ST805

1.Open the battery door using a coin or similar pry device to release the battery door tab on the ST802/ST805.ST802/ST805willbeshippedwithalkalinebatteries.Rechargeablebatteriescan beusedoptionalbutneedtobechargedexternally.

2.InserttwoAAbatteriesnotingtheplus(+)andminus(-)diagramsinsidethebatteryhousing.

3.Closethebatterydoor.Pushdownuntilit“clicks”intothelockedposition.

4.3.2 Turning On/Off the ST802/ST805

Thesignaltransporter(ST)isahand-helddevicethatextendstheradiorangeofalaserwhichispairedwiththeST.Pressthepowerbuttontopoweronthesignaltransporter.AllLEDsturnonforthreeseconds.FinallyaflashingyellowstatusLEDshowsthesignaltransporterhasbeenpairedwithalaserbutthislaserisnotavailable.AsolidblinkingyellowstatusLEDisshowingthattheradioconnectionbetweenthesignaltransporterand the paired laser has been established.

5 LASER SETUPPosition the laser horizontally (tripod mount and rubber feet downward!) on a stable platform, wall mount or tripod at the desired elevation.The laser recognizes automatically whether it is used horizontally or vertically when switched on.

5.1 Turning On/Off the laserPress the power button for one second to turn On the laser.

Press the power button for two seconds to turn Off the laser.

Note:Whenagradevaluehasbeenenteredandaftertemperaturechangeofmorethan9°F(5°C),theunitstartsthetemperature/referencecheckwhilethethermometersymbolisflashing(Pic1).

Anothertemperaturechecktakesplaceafter20min.andfinallyevery60min.Whenthetemperature/referencecheckhasbeenfinished,thestandarddisplayappearsandthebubblesymbolsflashuntilself-levelinghasbeencompleted(Pic2).

Iftheself-levelingcan’tbefinishedbasedontheselectedsensitivity,anerrormessageappears.

AbubblesymbolhelpstoadjusttheunitatthecrossaxiswhensetupverticalforautomaticSpotAlignorinvertical manual mode.

Pic 1 Reference check Pic 2 Standard display horizontal

Pic 3 Standard display vertical

Page 8: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

6

5.2 Features and Functions

5.2.1 Standard DisplayThe remote control mirrors the functionality of the laser keypad

Button 1: QuicklypressandreleasestartstheMENU entry.

Button 2: Quicklypressandreleasestartsthegrade entering mode.

Button 3: Quicklypressandreleaseactivates/deactivates the manual mode.

Button 4: Quicklypressandreleasetotogglethrough the pre-selected rotation speeds. Press and hold for three seconds changestheunitintoscanmode.Wheninscanmode,quicklypressandreleasebutton 4 toggles through the pre-selected scan sizes.

Button 5, 8:up/downarrowbuttons.Button 6, 7:left/rightarrowbuttons.Button 9: ON/OFFbutton-pressfor1secondto

turnontheunit;pressandholdfor2seconds to turn off the unit.

Leveling/Standby – LED (green/red)

Batterystatuslaser HIalertfunctionisactivatedMaskselection BatteryStatusRemoteControl

StatusRadioConnectivityRotationspeed/ScanangleFanBeamisactivated

5.3 Standard Features

5.3.1 X-Y-Z-grade entering – Digit Select mode (Default)

Quicklypressandreleasebutton2 (Pic5)startsthegradeenteringmode.Bothgradevalueswillbeshown.Acursor(Pic6)blinksatthecurrentpositionwhichcanbechanged.Press/releasebutton1 aquicksetto0%Press/releasebutton2 a change the sign in front of the grade valuePress/releasebutton3 a return to the standard display.Quicklypressandreleasebutton4toconfirmtheselectedgradevalueandreturntothestandarddisplay.

Press and release button 5 or 8(downorup)tomovethecursortotheX-orY-axis(notusedinZ-mode).Pressing and releasing button 6 or 7(rightorleft)movesthecursortotheright/left.Usebutton 1 or 2(PlusorMinus)tosetthedesireddigit(Pic9).Thelaserwillself-leveltotherequiredgradepositionafterconfirmingthegradechangewithbutton4.

Pic 5 Standard Display Pic 6 Grade Entry Mode

Page 9: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

7

Note: ThebubblesymbolsatthelaserandremotecontrolLCDwillflashuntilthelaserhasbeenself-leveledtotherequestedgradeposition.

5.3.2 X-Y-Z-grade entering – Step and Go mode

Howtochangeto‚StepandGo‘modeseechapter8.5

Quicklypressandreleasebutton2(Pic10)startsthegradeenteringmode.Bothgradevalueswillbeshown.Press/releasebutton1 a grade reverse Y (Pic 11)Press/releasebutton2 a grade reverse X (Pic 11)Press/releasebutton3 a return to the standard displayQuicklypressandreleasebutton4toconfirmtheselectedgradevalueandreturn to the standard display

Press and hold button 6 or 7(left/right)tochangeX-axisgradevalueafterthecomma;pressandholdbuttons6+7simultaneouslystartsX-axisquickchangemodewherethegradevalueinfrontofthecommawillbesetto0%andthenstartschangingin1%increments.Press and hold button 5 or 8 (up/down) for changingY -axisgradevalue; pressandholdbuttons5 +8 simultaneouslystartsY-axisquickchangemodewherethegradevalueinfrontofthecommawillbesetto0%andthenstartschangingin1%increments.Note: The speed of the grade value change increases with the amount of time the button is held down.Note: Thegradevalueforbothaxesincreasesin1.00%increments.Whenthegradevalueforeitheraxisreachesitshighestamount,thegradevalueswitchestothelowestvalueforthataxis.Forexample,thevalueswitchesfrom+25%to-25%.Thelaserwillself-leveltotherequiredgradepositionafterconfirmingthegradechangewithbutton4.Note:Thebubblesymbolsatthelaser’sLCDwillflashuntilthelaserhasbeenself-leveledtotherequestedgrade position.

5.3.3 Rotation ModeRepeatedlypressingthebutton4togglesthrough0,80,200,600,750rpmregardlessiftheunitis in automatic or manual mode.At0rpm,thebeamstopsautomaticallyclosetothe+Y-axiscenterposition.Whensetupinautomaticorgrademode,usingbuttons5/8 increases/decreasesrotorspeedfrom0to80andthenupto750rpmcontinuouslyin10rpmincrements.

5.3.4 Pointing ModeAt0rpm,buttons6/7movethebeamtotheleft/rightside.Whensetupverticallyat0rpm,button5/8 move thebeamclockwise/counterclockwise.Note:Pressandholdbutton4 for three seconds to change the unit from rotation mode (default) into scan mode.

Pic 9 Set Digit

Pic 10 Standard Display Pic 11 Grade Reverse

Page 10: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

8

5.3.5 Scan ModePress and hold button 4attheStandardDisplayforthreesecondstochangetheunitintoscanmode.Quicklypressandreleasebutton4totogglebetweenthepre-selectedscansizes5,15,45,90,180degreesand0;regardlessiftheunitisinautomaticormanualmode.Whenworkinginhorizontalautomaticmode,pressandholdbutton5/8toincrease/decreasethe

linesizein5degreesincrements.Pressandholdbutton 6/7movesthescanlinetotheright/leftdirection.Whenusedinautomaticverticalmode,pressingandholdingbutton5/8movesthescanlinecounterclockwise/clockwise.Whensetupvertical,pressingandholdingbutton6/7movesthescanlineintotheright/leftdirectionregardless if in automatic or manual mode.Note:Pressandholdbutton4 for three seconds to change the unit back to rotation mode (default) mode.

5.3.6 Manual ModePressing and releasing button 3attheStandardDisplayactivates/deactivatesthe manual mode regardless if set up horizontal or vertical.Manualmodeisindicatedbyhorizontallinesnexttotheaxessymbols(Pic12).

Anadditionalbubblehelps toadjust the laseron thecrossaxiswhensetupvertical (Pic 13).

Inmanualmode(horizontal),theY-axiscanbeslopedbypressingtheUp-(5)andDown-Arrow-(8) buttons on thelaser‘skeypadortheremotecontrol.Additionally,theX-axiscanbeslopedbypressingtheLeft-(6) and Right-(7)Arrow-buttonsonthelaserorremotecontrol.Inmanualverticalmode,theupanddownarrowbuttonsadjusttheZ-axisslope,andtheleftandrightarrowbuttonsalignthelaserbeamtotheright/leftside.To resume automatic self-leveling mode, press the manual button again.

6 SPECIAL MENU FEATURES

6.1 Menu Functions (Radio controlled)Press and release button 1attheStandardDisplaytoentertheMENU.The menu offers always only the features which can be selected depending on the setup (horizontal or vertical).The icon of the selected function will be highlighted.Adownarrowat the the right site indicates that the user can scroll down through themenu using the button 8 (down arrow).Aftergoingtothenextmenurow,anup/downarrowatthetherightsiteindicatesthattheusercanscrollup/down through the menu (4 different screens) using the buttons 5/8(up/downarrows).Pressing and releasing button 3 changes the unit always back to the standard or previous display.Press and release the buttons 6/7 until the desired icon at the selected menu row is highlighted.Press and release button 4toopenthesubmenuORstarttheselectedfunction.

6.2 Menu Functions (IR controlled)IftheRC603Nispairedwithatransmitterandtheradioconnectionisnotavailable,e.g.,throughapipe,theIRconnectionoffersreducedfunctionssuchasSpotAlign,SpotMatchandPairing.

Pic 12 Horizontal manual Pic 13 Vertical manual

Page 11: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

9

PressandreleasetheMENUbuttonattheStandardDisplay.Pressing and releasing button 3 changes the unit always back to the standard or previous display.Press and release the buttons 5 to 8 until the desired icon is highlighted.Press and release button 4toopenthesubmenuORstarttheselectedfunction.Note: Pairing function is needed to pair an already paired remote with a new transmitter.The new transmitter has to be set to the pairing dialog for this operation. Otherwise the pairing can not be successful processed. The pairing information of the previous pairing is still stored in the previous paired transmitter and should be deleted in the pairing dialog of this transmitterNote: Ifaremote ispairedwithatransmitter theIRsignalsof theremote(incaseofan interruptedradioconnection) will transmitted in a private mode so that only thepaired transmitter can received these IRcommands.

6.3 Automatic PlaneLok ModeThe PlaneLok mode can be activated in horizontal and vertical automatic and manual mode. InPlaneLokmodewhensetuphorizontal,thebeamwillbelockedtoafixedelevationpoint(upto150m(490ft)locatedononeaxisat each side of the laser. Forkeepingverticalalignmentsfixedtoadirectionpoint,PlaneLokcanbeusedinbothdirectionsontheY-axisand/orontheX-axis.

Note:IneveryPlaneLokmodethelasercontinuestoservotothereceiver’ssignals.Anylossofsignaloveranextendedperiodoftime(1minute)causesthelasertogointotheHI-alertcondition(beamturnsoff,rotorstopsandawarningmessageoccursattheLCD.PlaneLokmodecanbereactivatedaftertheerrormessagehasbeendeletedwithbutton4.ExitingofPlaneLokmodecanbedonebypressingbutton3(ESC)oranyHL760button.HorizontalSetUp:1. Set up the laser over the reference point.2.AttachtheHL760receivertoagraderod.PlacethereceiveratthesecondpointandadjustittotheOn-

grade position. The receiver should be permanently mounted at this location and at the desired elevation.3.Usethesightingguidesonthetopofthelasertoalignthelasertothereceiver.Turnthelaseronthetripoduntilitisroughlyalignedtothereceiver’sposition(thealignmentrangeforbothaxesis+/-40°).

4.PressandreleasetheMENUbuttonattheStandardDisplayandselectPlaneLok(Pic14).

Pic 14 PlaneLok horizontal

Pic15PlaneLokvertical

5.Whensetuphorizontally,pressandreleasebutton4toopenthePlaneLoksubmenu;selectthedesiredPlaneLokaxisY(Pic16)orX(Pic17)orYandX-axis(Pic18)thenpressbutton4 to start PlaneLok.

Pic16PlaneLokY-Axis

Pic17PlaneLokX-Axis

Pic18PlaneLokY-andX-Axis

Page 12: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

10

Note:Thelaserstartstosearchforthereceiver.AflashingReceiverandLocksymbolappearsattheselectedaxisandbecomessolidwhenPlaneLokhasbeencompleted.

Pic19PlaneLoksymbol

TheHL760display showsa flashing –PL– during the time thelaserissearchingandadjustingthebeamtotheon-gradeposition.WhenPlaneLok is complete, –PL– stops flashingat theHL760display. 6.ExitingofPlaneLokcanbedonebypressingbutton3(ESC).

VerticalSetUp:1. Set up the laser over the reference point2.AttachtheHL760receiver(withtheverticaladapter)tothenextreference point3.PressandreleasetheMENUbuttonattheStandardDisplayandselectPlaneLok(Pic15).Pressandreleasebutton4toopenthePlaneLoksubmenu;selecttheYaxis(Pic16)orX-axis(Pic17)orY-andX-axis(Pic18)and press and release button 4 to start PlaneLok.Note:Whenusedinverticalmode,thereceiverhastobeplacedwiththephotocellonthebottomside;forY-PlaneLok,alignthetopofthereceivertothetopofthelaser.TheHL760displayshowsaflashing–PL–duringthetimethelaserissearchingandadjustingthebeamtotheongradeposition.WhenPlanLokiscomplete,-PL–stopsflashingattheHL760display.4.ExitingofPlaneLokcanbedonebypressingbutton3(ESC).

6.4 Automatic Grade MatchTheGradeMatchmodecanbeactivatedinhorizontalautomaticandmanual mode.InGradeMatchmode,thelasercanbeusedtomeasuretheexistinggradevaluebetweentwoknownelevationpoints(upto150m(490ft)locatedononeaxisateachsideofthelaser1. Set up the laser over the reference point.2.AttachtheHL760receivertoagraderod.Checkthelaser’selevationnext to the laser then position the receiver at the second pointWITHOUTchangingthereceiver’selevationontherod.

3.Usethesightingguidesonthetopofthelasertoalignthelasertothereceiver.Turnthelaseronthetripoduntilitisroughlyalignedtothereceiver’sposition(thealignmentrangeforbothaxesis+/-40°).

4.PressandreleasetheMENUbuttonattheStandardDisplayandselectGradeMatch.(Pic20)

5.SelectthedesiredGradeMatchaxisY(Pic21)orX(Pic22)orYandX(Pic23)thenpressbutton 4 to startGradeMatch.

Pic22GradeMatchX-Axis

Pic23GradeMatchY-/X-Axis

Pic21GradeMatchY-Axis

Note:Thelaserstartstosearchforthereceiver.AflashingReceiverandanglesymbolappearsattheselectedaxisanddisappearswhenGradeMatchhasbeencompleted.

mm

Pic20GradeMatch

Page 13: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

11

Whilethelaserissearchingandadjustingthebeamtotheon-gradeposition,theHL760displayshowsaflashing–GM–. WhenGradeMatchhasbeencompleted,theHL760goesbacktothestandardelevationdisplay.Theremotecontrolaswellasthelaserwilldisplaythefinalmeasured grade value.Note:IfGradematchcan’tbecompletedbycheckingthelimits,thelasercomeswithanErrormessage(GradeMatchhasFailed)whichcanbedeletedwithbutton 4(OK).TheHL760goesbacktostandardelevationindication.

6.5 Manual Grade Match

NavigatetothemenuGradeMatch(Pic20).ChoosethesubmenuGradeMatchMan.(Pic25)

Pic25GradeMatchmanual

InManualGradeMatch,thebeamonbothaxescanbeadjustedtothereceiver‘son-gradeposition,e.g,whenotherreceiversastheHL760areused.ThegradefortheY-axiscanbeadjustedwithbutton5/8 while button 6/7adjusttheX-axis.DuringManualGradeMatchacrossedvialandangle(Pic26)symbolappearnexttothecontinuouslychangingY-andX-axisgradevalue.Afteradjustingtothereceiver’son-gradeposition,pressbutton 2(OK)togobacktoautomaticmodewherethefinalgradevaluewillbeshownforbothaxes.

Pic26

Note:Pressingbutton3(ESC)exitsManualGradeMatchandchangestheunittomanualmode..

6.6 Axis Alignment

6.6.1 Automatic Axis Alignment AutomaticAxisAlignmentmode adjusts automatically the directionthegradeaxisispointingtothereceiver’slocationbyanelectronicallysimulationofrotatingtheunitonitsbasetomatchthehub.UsingAxisAlignment,thelaseraxiscanbealignedtoonedirectionhub(upto150m(490ft)locatedononeaxisateachsideofthelaser.1. Set up the laser over the reference point.2.PlacethegraderodwiththeattachedHL760receiveratthedesired

direction hub. 3.Usethesightingguidesonthe topof the laser toalign the laser to

the receiver. Turn the laser on the tripod until it is roughly aligned to the receiver’s position (the alignment rangeforbothaxesis+/-40°).

4.PressandreleasetheMENUbuttonattheStandardDisplayandselectAxisAlign.(Pic27)

5.SelectthedesiredaxisY(Pic28)orX(Pic29)orYandX(Pic30)thenpressbutton4tostartAxisAlign.

Pic28AxisAlignmentYAxis

Pic29AxisAlignmentX-Axis

Pic30AxisAlignmentYandX-Axis

Note:Adjusting the receiver into thebeambeforestarting theautomaticAxisAlignment reduces the timeneededforfinishingthealignment.

mm

Pic27AxisAlignmenthorizontal

Page 14: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

12

6.6.2 View Align AnglesSelecting the submenu „View Align Angles“showsthealignmentangleafteranaxisalignmenthasbeencompleted. This function can be used to measure an angle difference between two direction hubs in a range uptomax.80°byperformingtwoaxisalignmentsinsequence.

6.6.3 Edit Align AnglesThe submenu „Edit Align Angles“selectionallowstodialinanaxisanglewheretheaxisdirectionwillbealignedtooafterafirstaxisalignmenthasbeendone.Tworowsareavailablefortypinginaxisanglevalues.Button5 and 8canbeusedtotogglebetweenbothrows.Changingthesignandnumberscanbedoneusingthe buttons 1 and 2. Press and release button 4toconfirmtheselectedaxisangles.TheaxeswillbeadjustedwhilethedisplayfallsbacktothemainMenu.Press and release button 3(ESC)toexittheAnglefunctions.

6.7 Mask modeSelecttheMaskicon(Pic32)andpressandreleasebutton4toopentheMasksettingmenu.Dependingonwhichsideorcornerthebeamshouldbeturnedoff,therequiredsectorcanbeselected. Press and release the buttons 5 to 8formovingashortflashinglinearoundthemaskmodesymbol.Forselectingthesectorwherethebarisflashing,pressandreleasebutton1(SET).Aftersettingthefirstsector,button1changestoshowCLRwhichofferesthecapabilityofdeleting theselectedmasksectoragain.Usebutton5 to 8tomovetheflashingbartootherrequiredareasandrepeatthesettingprocess.Whenallareashavebeenset,pressbutton 4 to store the mask sector selection until the unit will be turned off.

Note:Theunitalwayspowersupwiththemaskmodedeactivated(default).

6.8 Manual Spot Search mode The Spot Search mode is used for detecting the plumb beam manually using the Spot Finder SF601andcanbeactivatedinhorizontalandverticalautomaticandmanualmode.PressandreleasetheMENUbuttonattheStandardDisplayandselectSpotSearch(Pic33).Pressing button 4activatesthefanbeamwhiletherotationspeedchangesto750rpmand

the unit goes back to the standard display.The4redLEDsaroundthecenterholeguidetheusertotheplumbbeam‘scenterposition-all4LEDson=>confirmationtheSF601hasbeensettothecorrectcenterposition.ToswitchofftheSportSearchmodepressandreleasetheMENUbuttonandselectSpotSearch(Pic33);pressing button 4 switches off the Spot Search mode. The regular plumb beam is visible again and the unit goes back to previous rotation speed.Note:ManualSpotSearchcanalsobeactivatedanytimebyturningontheSpotFinderSF601.

TurningOfftheSF601deactivatestheSpotSearchmodeimmediatelybydeactivatingthefanbeam.

Pic32MaskMode

Pic 33 Spot Search

Page 15: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

13

6.9 Activating/Deactivating Standby modePressandreleasetheMENUbuttonattheStandardDisplayandselectStandby(Pic31).Pressing and releasing button 4 activates the Standby mode. Theself-levelingwillbestoppedandthebeamwillbeturnedoffwhiletheHIalertisstillactive.ThedisplayshowsthestandbysymbolandtheLevel/StandbyLEDflashesredevery5seconds.

To deactivate Standby mode and restore full operation of the laser, press and release button 4.

6.10 Start Reference Check Whenworkingduringtemperaturechangesandoverlongdistancestheproductrequiresafrequentreference check to maintain accuracy and avoid errors caused by drift. The transmitter will do an automaticuponstartupandafter20minutesofoperation.Itwillrepeatthereferencecheckevery60minutesandwhenthereisa5°C(9°F)changewithintheproduct.Whencarryingoutworkwhereaccuracy is paramount it is advised to manually prompt a reference check at regular intervals.

PressandreleasetheMENUbuttonattheStandardDisplayandselectReferenceCheck (Pic35).Pressing and releasing button 4startstheReferenceCheckconsideringthecurrenttemperatureinside the housing.Whiletherotorchecksthecorrectpositiontherotationwillbestopped.Note:Agradevaluehastobeenteredbeforetheunitstartsthereferencecheck.

6.11 Setting MenuPressandreleasetheMENUbuttonattheStandardDisplayandselectSettings(Pic36).Press and release button 4toopentheSettingMenu;selectthedesiredfunctionthenpressbutton4toopentheselectedsubmenufunctionORstarttheselectedfunction.

PleaseseetheSettingMenudetailsattheendoftheuserguide.

6.12 InfoPressandreleasetheMENUbuttonattheStandardDisplayandselectInfo(Pic37).Buttons6/7canbeusedtotogglebetweenUL,RCandRuntime.Press and release button 4toconfirmtheselection.TheUL/RCinformation(softwareversion,ID,etc.)ortheruntimeoftheULwillbedisplayed.

Pic 34 Standby

Pic35ReferenceCheck

Pic36Settings

Pic37Info

Pic38InfoUL Pic39InfoRC Pic40Runtimes

Page 16: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

14

6.13 ServicePressandreleasetheMENUbuttonattheStandardDisplayandselectService(Pic41).Buttons6/7 can be used to toggle between Calibration Y and Calibration XOR Calibration Z when set up vertically.

Press and release button 4toconfirmtheselection.Thecalibrationattheselectedaxisstartsthefieldcalibrationprocedure.

6.14 RC603N Service menu:ThismenuisavailableonlyviatheRC603N.

6.14.1 RF IR optionsChoosemenu‚RFIROptions‘(Pic45).Pressandreleasebutton4toconfirmtheselectionandselectoneofthefollowingoptions:RFOn;IRauto=>Radioonalltimes;IRwillbeactivatedautomaticallyafterradioconnectionhas been lost.

RFOff;IROn=>RadioturnedOff;IRalwaysactivated RFOn;IROff=>RadioturnedOn;IRalwaysOff

Pic46RFOn;IRAuto

Pic47RFOff;IROn

Pic48RFOn;IROff

6.14.2 RF ConnectivityPress and release button 4togetastatusofthecurrentRadioconnectivity(Pic49).

Pic 41 Service

Pic42CalibrationY

Pic 43 CalibrationX

Pic 44 CalibrationZ

Pic45RFIROptions

Pic49RadioConnectivity

Page 17: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

15

7 SPECIAL FEATURES - VERTICAL SETUP

7.1 Z-Axis Automatic Spot Align TheSpotFinderSF601guidestheplumbbeamtothetargetpointinthehorizontalaxis,while

theZ-axisgradevaluewillbemaintained.UsingSpotAlignment,theplumbbeamcanbealignedautomaticallytoonedirectionhub(upto80m(260ft)locatedinfrontoftheplumbbeam.1. Set up the laser over the start point.2.Adjustthedisplaybubbletothecenteredposition.

3.TurnonandattachtheSF601SpotFinderatthedesireddirectionhub.4.PressandreleasetheMENUbuttonattheStandardDisplay;selectSpotAlign(Pic50)andstartthefunction

using button 4 (fan beam will be activated).

Note:SpotAligncanalsobestartedusingtheRC603Nviainfrared.Note:ThedisplayfallsbacktothestandarddisplaywhileaSpotFindersymbol(Pic51)isflashing.

Pic51SpotFinder

TheplumbbeamwillbeautomaticallyalignedtothecenteroftheSF601.

5.Afteralingmentiscomplete(all4redLEDsattheSF601areon),theplumbbeamwillmoveverticallytothepreviousdialedinZ-axisgradevalue.

Note:AutomaticSpotAligncanbeexitedanytimebypressingandreleasingbutton3(ESC).

7.2 Z-axis Automatic Spot LokAutomatic SpotLok (likePlaneLok)canbeusedtoalignandholdtheplumbbeamautomaticallytotheSF601’scenterpointandcontinuouslyadjustingtheZ-andX-axisuntilexitingthismode.TheULlooksalwaystothecenterpositionoftheSF601andre-adjuststhebeamimmediatelytothecentertoavoidanysetup/alignmentdriftcausedbyvibrationsortemperatureinfluences(e.g.whenworkingonconcretepads,facadeapplications).UsingSpotLok,theplumbbeamcanbealignedautomaticallytoonedirectionhub(upto80m(260ft)locatedin front of the plumb beam.

1. Set up the laser over the start point.

2.PlacetheSF601SpotFinderatthesecondreferencepoint.

3.Press and release theMENUbutton at theStandardDisplay,selectSpotLok(Pic52)andstart the functionusing button 4 (fan beam will be activated).

Note:SpotLokcanalsobestartedvia infraredusing theRC603N.

Note:ThedisplayfallsbacktothestandarddisplaywhileaSpotFinderandlockicon(Pic53)isflashing.TheplumbbeamwillbeautomaticallyalignedtothecenteroftheSF601.

Pic53LockMode

4.AfterSpotLokiscompleteall4redLEDsattheSF601areonandtheiconsstopflashing.Thetransmitter‘splumbbeamisalwayscheckingforperfectalignmenttothecenteroftheSF601.All4LEDsflashevery5secondstoconfirmthecorrectalignment.

Note:AutomaticSpotLokcanbeexitedanytimebypressingandreleasingbutton3(ESC).

Pic50SpotAlign

Page 18: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

16

7.3 Z-axis Automatic Spot MatchAutomatic-Spot-Match canbeusedformeasuringanunknowngradevaluebetweentwoexistingelevationse.g.,inanexistingpipewhichneedstobereplacedoranopentrenchwithanunknowngradevalue.

TheplumbbeamwillbeautomaticallyalignedtotheSF601centerpoint(Z-andX-axis)andswitchesbacktoautomaticZ-axisgrademodewhiledisplayingthemeasuredZ-gradevalue.

UsingSpotMatch,theplumbbeamcanbealignedautomaticallytoonedirectionhub(upto80m(260ft)located in front of the plumb beam..

1. Set up the laser over the start point.

2.Place theSF601SpotFinder at the second referencepoint.

3.Press and release theMENUbutton at theStandardDisplay,selectSpotMatch(Pic54)andstartthefunctionusing button 4 (fan beam will be activated).

Note:SpotMatchcanalsobestartedviainfraredusingtheRC603N.

Note:ThedisplayfallsbacktothestandarddisplaywhileaSpotFinderandanglesymbol(Pic55)isflashing.TheplumbbeamwillbeautomaticallyalignedtothecenteroftheSF601.

Pic55AngleSymbol

4.WhenSpotMatchhasbeencompleted,thefanbeamwillbeturnedoffandtheULcalculatesthegradevaluebetweenbothelevationpoints.ThecalculatedgradevaluewillbedisplayedattheUL‘sandRC‘sdisplay.

Note:AutomaticSpotMatchcanbeexitedanytimebypressingandreleasingbutton3(ESC).

7.4 Line ScanLineScan(Pic56)centerstherotorhorizontallyandcanbeusedtoaligntheplumbbeamtoadesiredhorizontalposition.PressandreleasetheMENUbuttonattheStandardDisplayandselect Line Scan. Pressing and releasing button 4 activates the Line Scan mode while the rotor checksthelimitsoftheX-axisandstopsatthecenterposition.

Pressing button 3(ESC)stopsthemovementandchangestheunitintomanualmode.

Correctionsupanddowncanbedoneusingbutton5/8;forleft/rightcorrectionsusebutton6/7.

Press and release the manual button to change the unit back to full automatic mode.

DuringtheLineScanprocessthecentermovesymbol(Pic57)isflashing.

7.5 Beam PlungeBeamPlungecenterstherotorverticallyandcanbeusedtoaligntheplumbbeamtoadesiredverticalposition,e.g.,whendoingInteriorlayout.

PressandreleasetheMENUbuttonattheStandardDisplayandselectBeamPlunge(Pic58).Pressing and releasing button 4activatestheBeamPlungemodewhiletherotorchecksthelimits

oftheY-axisandstopsatthecenterposition.Pressing button 3(ESC)stopsthemovementandchangestheunitintomanualmode.

Correctionsupanddowncanbedoneusingbutton5/8;forleft/rightcorrectionsusebutton6/7.

Press and release the manual button to change the unit back to full automatic mode.

Pic56Line Scan

Pic57CenterMove

Pic58BeamPlunge

Page 19: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

17

8 SettingsPressandreleasetheMENUbuttonattheStandardDisplayandselectSettings(Pic59).

Press and release button 4toopentheSettingMenu;selectthedesiredfunctionthenpressbutton4toopentheselectedsubmenufunctionORstarttheselectedfunction.

TheSettingMenuoffersthefollowingfunctions:

Pairing Grade Entry Grade Display Sensitivity

HI-Alert

User Name Set Password Password On/Off RF-Channel

Select Language

Position Info

8.1 PairingPairing is needed to couple different devices with the laser. The laser is able to communicate with several numbers of other radio network participants and pairing is the process to link these to each other.Buyingthelaseralldevicesshouldbepairedbutforsomereasonsthismaynotbetrueor the pairing has been lost. So you can pair the devices as described in the following sections.

Note:Makesurethatpairingmodeisselectedonlyatonelaserwhichiswithintheradiorangeoftheremoteduringapairingrequest.Otherwisepairingprocedurecanbeconfused.

8.2 Pairing the laser with remote controlStartwiththelaser.WheninmenuSettings(Pic59),pressandreleasebutton4toopenthepairingmenu(Pic71).Thedisplayshowsthecurrentlypairedunits(uptotworemotes).MakesureatleastoneRCslotisfreefortheremotetobepaired.IfnofreeRCslotisavailable,chooseoneofthemanddeleteitusingbutton1(CLR).Pressbutton2tostartthepairingprocess.Continuewiththeremotechoosingthesymbolpairing(Pic71);thepairingstartsautomatically.Aftersuccessfulpairing,thelaserdisplayshowstheIDoftheremotein the pairing list.

8.3 Pairing the laser with receiver HL760To pair the laser and the receiver select Settings and press and release button 4 to open the Pairing menu (Pic 71).Thedisplayshowsthecurrentlypairedunits(upto2receivers).Ifalready2receivershavebeenpaired,one or both of them have to be deleted using button 1(CLR).

Pic59Settings

Pic71Pairing

Page 20: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

18

A

BC

Next,turnonthereceiverthenpressandholdtheDeadband(A)andtheAudio(B)buttonsfortwoseconds.AftertwosecondsthedisplayshowsMENUfirst,thenRDIO.

PressandreleasetheUnits(C)button–displayshowsthecurrentradiomode.

IfnotalreadysettoLS,pressUnitsbuttonandthenpressDeadbandorAudiobuttonuntilLS is displayed. PressUnitsbuttonagaintoenterselection.PressandreleasetheAudiobutton–displayshowsPAIR.PresstheUnitsbuttonagain–thedisplayshowsPAIRandarotatingbar.AftercompletingPAIR,OKwillbedisplayed.TheUL633Npairsnowautomaticallywiththenewreceiver.PressandreleasethePowerbuttontwotimestoexitthemenu.Alasersymbolislittoconfirmthereceivercancommunicatewiththelaser.

8.4 Pairing the laser with the signal transporter (ST802/ST805)MakesuretheST802/ST805isswitchedoff.StartwiththeLaser.WheninmenuSettings(Pic59),pressandreleasebutton4toopenthepairingmenu(Pic71).Thedisplayshowsthecurrentlypairedunits(onesignaltransportermax).MakesuretheSTslotisfreeforthesignaltransportertobepaired.Iftheslotisnotfree,choosetheSTslotanddeleteitusingbutton1(CLR).Pressbutton2tostartthepairingprocess.Switchonthesignaltransporter.Thesignaltransporterpairsautomaticallywiththelaser.IfthepairingwassuccessfultheaddressorIDofthepairedSTisshowninthepairinglist;alsothesignaltransportershowsasolidblinkingyellowstatusLED.

8.5 Grade Entry SelecttheGradeEntryicon(Pic73)andpressandreleasebutton4toopentheGradeEntrymenu.

Buttons6/7canbeusedtotogglebetweenStepandGo(Pic74)andDigitSelect(Pic75).

Press and release button 4toconfirmtheselection.

Pic 74 Step and Go

Pic 75 Digit Select

8.6 Grade DisplaySelecttheGradeDisplayicon(Pic76)andpressandreleasebutton4toopentheGradeDisplaymenu.

ThedesiredGradeDisplayMode(Percent(Pic77)/Permille(Pic78)/Degree(Pic79))canbeselected using the buttons 6/7. Press and release button 4toconfirmtheselecteddisplaymode.

Pic73GradeEntry

Pic76GradeDisplay

Pic78Per mill

Pic77Percent

Pic79Degree

Page 21: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

19

8.7 Sensitivity SelectionSelect the Sensitivity icon and press and release button 4toopentheSensitivitymenu(Pic80).ThedesiredSensitivity:Low(Pic81),Mid(Pic82)(Default)andHigh(Pic83))canbeselectedusing the buttons 6/7. Press and release button 4toconfirmtheselectedSensitivity.

8.8 HI-alert SelectionSelecttheHIicon(Pic84)andpressandreleasebutton 4toopentheHI-alertmenu.ThedesiredHI-alert:5min.((Pic85);Default),30seconds(Pic86)andHI-Off(Pic87)canbeselectedusingthe buttons 6/7. Press and release button 4toconfirmtheselectedHI-alert.

8.9 User NameSelecttheUsernameicon(Pic88)andpressandreleasebutton4toopentheUsernamemenu.Onerowfortypingnamesinbigfont(15)andonerowinsmallfont(18)forlettersornumbersareavailable.Button5 and 8canbeusedtotogglebetweenbothrows.Changingthecharacterscan be done using the buttons 1 and 2. Press and release button 4toconfirmtheselectedusername.Thedisplayfallsbacktothemainmenu.Anytimetheunitwillbepoweredup,theUserinfo will be displayed for couple seconds.

8.10 Set Password“Setpassword”canbeusedtodefineakeythatisrequestedduringtheunitpoweringup.Thiscanpreventtheunauthorizedusageofthetransmitter.EnterMenu->Settings->SetPassword.SelecttheSetPasswordicon(Pic89)andpressandreleasebutton4toopenthePasswordmenu.UseButton1to8totypeinapasswordcontainingof4digits(Pic90)andrepeatthepasswordatthesecondrow.(Pic91)Pressandreleasebutton4tostoretheselectedpassword;

unitfallsbacktothestandardmenu.Afterpoweringuptheunit,thestandarddisplaycomesupif the correct password has been entered, otherwise the unit turns off automatically.

Pic80Sensitivity

Pic81Low Pic82Mid Pic83High

Pic84HiAlert

Pic85HI-alert5minutes

Pic86HI-alert30 seconds

Pic87HI-alertOFF

Pic88UserName

Pic89SetPassword

Pic90SetPassword Pic91ConfirmPassword

Page 22: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

20

8.11 Password On/OffSelecttheSetPasswordON-Officon(Pic92)andpressandreleasebutton4 to open the Password menu.Buttons6/7canbeusedtotogglebetweenPasswordOn(Pic93)andPasswordOff(Pic94)ifaPasswordhasbeenenteredbefore.Pressandreleasebutton4toconfirmtheselection.

Pic 93 Password On

Pic 94 Password Off

8.12 Radio (RF) Channel IntheRFChannelmenutheusercanchangetheradiochannel.Thismayhelptoovercomesomeradioconnectivityissuesbasedonheavyradiotrafficatthejobsite.Inthemenu“Settings”(Pic59)selecttheRFChannelicon(Pic95)andpressandreleasebutton4toopentheRadioChannelmenu(Pic95).TheRFchannelselectiondialogcontainssixradiochannels.Chooseonechannelandpressandreleasebutton4toconfirmtheselectedradiochannel.

Note:AfterchangingtheRFchannel,theRC,HLandSTneedstobepairedagain.

Note: To achieve the best radio performance, it is recommended to use the products in a height of app. 1m using a tripod or similar items.

8.13 Select LanguageSelecttheLanguageicon(Pic96)andpressandreleasebutton4 to open the Language menu.Usebutton5 to 8toselecttherequiredlocallanguage(EN,DE,IT,FR,ES,PT,NL,DA,NO,SV,FI,PL,TR,CZ).Pressandreleasebutton4tostoretheselectedlanguage;unitfallsbacktothe standard menu.

8.14 Position InfoWhenworkingwithhighgradevalues(>10%)oratextremetheproductrequiresthepositioninfotomaintain accuracy and avoid errors caused by different gravity. The user has the chance to provide thepositioninfoofthejobsitetotheproduct.Thisisthedegreeoflatitudeaswellasthealtitude.

ChooseMenuSettings(Pic59)andnavigatetothesubmenuPositionInfo(Pic97).Pressbutton4toactivatethesubmenu.Withbuttons1and2 thedifferentvaluescanbe increased/decreased.Also ‘+’or ‘-‘ for thelatitudecanbechangedwithbuttons1and2.Withbuttons5,6,7and8thecursorpositioncanbechanged.

Note:Torestorethedefaultvaluescrolldownwitharrowbuttons5or8to‘Defaultposition’.Pressbutton1(‘Set’);theunitwillchangethesettingstothedefaultvalues.Pressbutton4toconfirmthechange.

Pic92PasswordOn/Off

Pic95RFChannel

Pic96Language

Pic97PositionInfo

Page 23: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

21

9 CALIBRATION

9.1 Checking Calibration of the Y- and X-Axes1. Set up the laser 30 m (100 ft) from a wall and allow it to level.2. Setthegradeto0.000%inbothaxes.3. Raise/lowerthereceiveruntilyougetanon-gradereadingforthe+Yaxis.Using

the on-grade marking notch as a reference, make a mark on the wall.

Note: Forincreasedprecision,usethesuperfine-sensitivitysetting(1.0mm/1/16in.) on the receiver.

4.Rotatethelaser180°(-Yaxistowardthewall)andallowthelasertore-level.5.Raise/lowerthereceiveruntilyougetanon-gradereadingforthe–Y/axis.Usingthe

on-grade marking notch as a reference, make a mark on the wall. 6.Measurethedifferencebetweenthetwomarks.Iftheydiffermorethan3mmat30m(1/8inchat100feet),thelaserneedscalibrating.

7.AftercheckingtheY-axis,rotatethelaser90°.Repeattheabovestartingwiththe+Xaxisfacingthewall.

9.2 Checking Calibration of the Z-(vertical) AxisTo check vertical calibration, you need a plumb bob with at least 10m (30ft) of string.1. Suspend the plumb bob in front of a house i.e., attached to a window frame whose window height is at least

10m (30ft). 2.Setupthelaserinverticalsothatthelaserbeamstrikesthereceiver’son-gradepositionatthetopofthestring.3.Lookforanydeviationusingthereceiverfromthetopofthestringtothebottomofit.Ifthedeviationismorethan1mm(<1/16in.),theverticalaxisneedscalibrating.

Page 24: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

22

10 TroubleshootingAnyerrormessagecanbedeletedwithashortpressofbutton4 (OK). The table shows the related description andpossiblesolutions.Thenextservicecentershouldbecontactedifadifferenterrormessageasshownatthe table will be displayed.

Error codes Description Solution

21 TemporaryEEpromproblem Repeatpairingandre-enterthecustomer settings

120 HIalert-UnitHeightchanged ChecklaserbeamelevationafterdeletingtheHIalert

130 MechanicalLimitduringAxisAlignment,GradeMatchorSpotMatch

Re-aligntheunitclosertothealignmentpoint;checkifexistingslopeisabove+/-25%

131 RakeAngleLimit Re-aligntheunitclosertothealignment point

140 Laser beam blocked Makesuretherearenoobstacles between the transmitterandtheHL760orSF601

141 Time Out - Function could not be completed in the allowed time

Checkradiooperatingrange/connection;checkstablelasersetup

150 Noreceiver-Receivernotavailableforsingleaxisautomatic function

Makesurethereceiverisonandpaired

151 Noreceivers-Bothreceiversare not available for automatic alignment function

Makesurebothreceiversareonand paired

152 Noreceiver-Thelasersearchedfor the receiver but could not findit

Checktheoperatingrangeforauto function and restart the auto alignment

153 LostReceiver-Thelasersearched and found the receiver but then lost it

Checktheoperatingrangeforauto function and restart the auto alignment

160 X,YorZlevelsensordefect Contactservicecenter

Page 25: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

23

11 SF601 - User Guide

SF601attachedtoagraderodusing the standard receiver clamp

Components SF601

SF601attachedtotheoptional pipe laser target base

1. SF6012. Slider 3. CenterHole4. PowerButton5. BubbleVial6. BatteryLED7. ModeLED8. RedDirectionLEDs9. IRtransmitters/receivers10. Markingnotches(frontandback)11. M6ClampMount12. Batterydoor13. LatchforBatteryDoor14. ReleaseTabSlider

10

1

10

3

4

5

9

1076

10

10

5

8

12

11

10

13

2

2

14

Page 26: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

24

Powering the SF6011. Open the battery door pulling the battery door latch. TheSF601willbeshippedwithalkalinebatteries. Rechargeablebatteriescanbeusedoptionalbutneedtobechargedexternally2.InsertfourAAbatteriesnotingtheplus(+)andminus(-)diagramsinside on the battery door. 3.Closethebatterydoor.Pushdownuntilit“clicks”intothelockedposition.

SF601 - Features and Functions1. Power/Mode Button:PressandreleasethepowerbuttontoturnONtheSF601.

AlldisplayLED’swilllightfor1.0sec.

Pressandholdpowerbuttonfor>1sec.toturnOFFtheSF601.After1sec.alldisplayLED’swilllight1.0sec.

Note: If theSF601hasbeen turnedon,a short buttonpressactivates/deactivates the fanbeam lens (apreviouslychosenautomaticmodewillbeexitedautomatically).

LED’s:

2. LED1:

solidgreenwhenSF601isonandbatteryOK

blinkingredifbatteryvoltageis3,8V<Vbat<4V

solidredifbatteryvoltageis<3,8V;

SF601turnsoffautomaticallyafter5min.

3. Mode LED2:

yellowsolid:automaticmode

flashing:noneorlostsignal

off:manualmode

4. Direction LEDs red:

Manualmode:pointingtowardsthecenteroftheplumbbeam.

All4LEDsaresolidredwhenthebeamiscentered.

AutomaticSpotLockmode:solidfor5min.,thenLED’sflashevery5seconds.

Using the SpotFinder SF601 for vertical UL applications WiththeUL633NusingIRconnection,theSF601canbeusedinthreedifferentautomaticmodesAutomatic-SpotAlignment,SpotLokandSpot-Matchandinadditioninamanual/display(SpotSearch)modetodetectthe plumb beam (fan beam).

Automatic-Spot Alignment: SF601guidesthebeamtothetargetpointinthehorizontalaxis,whiletheZ-axisgradevaluewillbemaintained.

2

4

31

Page 27: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

25

UsingSpotLok mode (like PlaneLok) aligns and holds the plumb beam automaticallytotheSF601centerpoint(bothaxes)untilexitingthismode.

Automatic-Spot-Match: (likeGradeMatch- two existing elevation pointswill be connected to measure the grade value between these two points) alignstheplumbbeamautomaticallytotheSF601centerpoint(bothaxes)andmovesback toZ-axisautomaticmodewhiledisplaying themeasuredZ-axisgradevalue.

Note: WhenAutomaticSpotAlignmentandAutomaticSpot-Matchhavebeencompleted,theUL633Nturnsoffthefanbeamautomatically.

Note:WithaquickpressandreleaseoftheSF601powerbutton,thefanbeamlensattheUL633Nwillbeactivated/deactivatedwhileapreviousactivatedautomodewillbeexited.

SF601 – Manual/Display Mode WithaquickpressandreleaseoftheSF601powerbutton,thefanbeamlensattheUL633Nwillbeactivated/deactivatedwhileapreviousactivatedautomaticmodewillbeexited.

Manual/Display (Spot Search) mode: If thefanbeamlenswillbeactivatedandnoautomaticmodehasbeenstarted,theSF601isinmanual/displaymodewheretheREDdirectionLEDsguidetheusertothecenterposition of the fan beam.

Note:IRcommunicationisdisabled.

ThedirectionLEDsworksimilarlikeusingthepipelasertarget,e.g.,ifthe left top LED is on,theSF601hastobemovedtotheleft/uppositiontobringthecenterholeintothecenterofthebeam.

All4 LEDs are solid red when the beam is centered.

Page 28: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

26

12 PROTECTING THE UNIT

Donotexposetheunittoextremetemperaturesortemperaturechanges(donotleaveinsidethecar).Theunitisveryrobustandcanresistdamageifdroppedevenfromtripodheight.Beforecontinuingyourwork,alwayscheckthelevelingaccuracy.SeeCheckingCalibrationsection.Thelaseriswaterproofandcanbeused indoors and outdoors.

13 CLEANING AND MAINTENANCE

Dirtandwaterontheglasspartsoflaserorprismwillinfluencebeamqualityandoperatingrangeconsiderably.Cleanwithcottonswabs.Removedirtonthehousingwithalint-free,warm,wetandsmoothcloth.Donotuseharshcleansersorsolvents.Allowtheunittoairdryaftercleaningit.

14 PROTECTING THE ENVIRONMENT

Theunit,accessoriesandpackagingoughttoberecycled.Allplasticpartsaremarkedforrecyclingaccordingto material type.

Do not throw used batteries into the garbage, water or fire. Remove them in compliance with environmental requirements.

Notice to Our European Union Customers

Forproductrecyclinginstructionsandmoreinformation,pleasegoto:

http://www.trimble.com/Corporate/Environmental_Compliance.aspx

InstructionsforReturntoERFC: •WEEEistobeshippedtotheERFC,clearlystatingWEEEonthedeliverynoteand/orpackaging

•Specificproductnumberandserialnumberinformationisnotrequired

•AdditionalreturnauthorisationfromTrimbleSupportisnotrequired

•DeliveryAddress:

TrimbleEuropeB.V.WEEERecyclingC/OMenlologisticsGate19to26Meerheide435521DZEerselTheNetherlands

ConfirmationofreceiptofthereturnedWEEEwillnotbeprovidedbytheERFC

15 WARRANTY

TrimblewarrantstheUL633Ntobefreeofdefectsinmaterialandworkmanshipforaperiodof5years.Trimbleor its authorized service center will repair or replace, at its option, any defective part, or the entire product, for whichnoticehasbeengivenduringthewarrantyperiod.Ifrequired,travelandperdiemexpensestoandfromtheplacewhererepairsaremadewillbechargedtothecustomerattheprevailingrates.CustomersshouldsendtheproducttoTrimbleInc.orthenearestauthorizedservicecenterforwarrantyrepairsorexchange,freightprepaid.Anyevidenceofnegligent,abnormaluse,accident,oranyattempttorepairtheproductbyotherthanfactory-authorizedpersonnelusingTrimblecertifiedorrecommendedparts,automaticallyvoidsthewarranty.Specialprecautionshavebeentakentoensurethecalibrationofthelaser;however,calibrationisnotcoveredbythiswarranty.Maintenanceofthecalibrationistheresponsibilityoftheuser.TheforegoingstatestheentireliabilityofTrimbleregardingthepurchaseanduseofitsequipment.Trimblewillnotbeheldresponsibleforanyconsequentiallossordamageofanykind.Thiswarrantyisinlieuofallotherwarranties,exceptassetforthabove,includinganyimpliedwarrantymerchantabilityoffitnessforaparticularpurpose,are hereby disclaimed. Thiswarrantyisinlieuofallotherwarranties,expressedorimplied.

Page 29: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

27

16 TECHNICAL DATA

16.1 UL633N

Leveling accuracy1,3: ±0.5mm/10m,1/16“@100ft,10arcsecondsGradeaccuracy1,3: ±1.0mm/10m,1/8“@100ft,20arcsecondsGradetemperaturedriftsensitivity: ±0,3mm/10m/1°C;1/16”@310ft.@1°FRotation: 0-750rpmScanmode: 5presetsizes+variableadjustmentOperational area1,2: appr.400m(1300feet)radiuswithdetectorLasertype: 650nmLaserclass: Class3Self-levelingrange: appr.±14°Graderange(Y;X): ±25%bothaxes(notsimultaneously)Graderange(Z): ±25%Levelingindicators: LCDindicationsandLEDflashesRadiorange(HL760)1,2,4: upto150m(490ft)Powersource: 4x1,5VDalkalinebatteriesorNiMHbatterypackBatterylife1: 35hoursNiMH;40hoursalkalineOperatingtemp.: -20°Cto50°C(-4°Fto122°F)Storagetemp.: -20°Cto70°C(-4°Fto158°F)Tripodattachments: 5/8x11horizontallyandverticallyDustandWaterproof: IP67Weight: 3.1kg(6.8lbs)Lowvoltageindication: LCDbatteryindicatorLowvoltagedisconnection: unitshutsoff

16.2 Remote Control RC603N

RadioOperatingrange1,2,4: upto150m(490ft) IROperatingrange1: upto80m(260ft)Powersource: 2x1.5VAAalkalinebatteriesBatterylife1: 130hoursDustandWaterproof: IP66Weight: 0.26kg(0.4lbs)

16.3 Spot Finder SF601

Operating range1,2,4: upto80m(260ft)Powersource: 4x1.5VAAalkalinebatteriesBatterylife1: 30hoursDustandWaterproof: IP67Weight: 0.43kg(0.4lbs)

1) at 21°Celsius2) under optimal atmospheric circumstances3) along the axis4) Heigt of instruments 1m (e.g. with tripod)

17 DECLARATION OF CONFORMITY

WeTrimble Kaiserslautern GmbHDeclareunderoursoleresponsibilitythattheproductsUL633N and RC603N Towhichthisdeclarationrelatesisinconformitywiththefollowingstandards:EN 50371:2002, EN 60825-1:2014, ETSI EN 300328 V1.7.1:2006, ETSI EN 301489-1 V1.9.2:2011, ETSI EN 301489-3 V1.4.1:2002following the provisions of directive R&TTE 1999/5/EC.The managing director

Page 30: GL400 Series UL 633N · can be used as a power supply for the laser. Alkaline batteries can be used as a backup. Insert 4 D-cell batteries noting the plus (+) and minus (-) diagrams

28

18 ELECTRO-MAGNETIC COMPATIBILITY

DeclarationofConformity

ThisdigitalapparatusdoesnotexceedtheClassBLimitsforradionoisefordigitalapparatussetoutintheRadioInterferenceRegulationsoftheCanadianDepartmentofCommunications.

Thisdevicecomplieswithpart15offtheFCCrules.Operationissubjecttotheconditionthatthisdevicedoes not cause harmful interference.

Note:TheproductbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCrules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Theproductgenerates,usesandcanradiateradiofrequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the product off and on. The user is encouragedtotrytoeliminatetheinterferencebyoneormoreofthefollowingmeasures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheproductandthereceiver.

•Formoreinformation,consultyourdealeroranexperiencedradio/televisiontechnician.

Caution:Caution:ChangesormodificationstotheproductthatarenotexpresslyapprovedbyTrimblecouldvoidauthoritytousetheequipment.